Availability
ROHN Parts and Accessories
ROHN Telescoping Masts
ROHN Telescoping Masts are available in a variety of heights to suit your specific application. They are manufactured from steel and then galvanized for corrosion protection and come assembled with mounting hardware. All telescoping mast installations must be guyed or bracketed (sold separately) and should be performed by experienced or licensed installers. NOTE: Unless specifically listed as otherwise, these masts are over-weight and over-length for our standard UPS or FedEx free shipping. Freight charges may apply. When you need antenna supports, ROHN Telescoping Masts, from DX Engineering, are the time-tested solution!
( 93 )
$267.99
—
$289.99
ROHN 25G Tower Sections
ROHN 25G Tower Sections are the world standard in galvanized steel tower. ROHN towers use double-bolted joints, which have been proven to be the best method of joining tower sections, for sturdiness and dependability. As a guyed structure, the standard 25G designs may rise to a height of 190 ft. ROHN 25G Tower Sections include the standard straight sections that are 10 ft. in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. 25G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. ROHN 25G Tower Sections feature: * Complete hot dip-galvanizing after fabrication * 11 1/4 in. equilateral triangle design * High-strength tubular legs are joined by continuous, solid round steel bracing cross members * Each straight and top section shipped with all required nuts and bolts for mounting that section, supplied inside one of the section legs. ROHN 25G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! Order your ROHN Tower Sections and other tower installation accessories from DX Engineering today!
( 21 )
$324.99
—
$359.99
ROHN SA253UA Side Arm Mounts
ROHN SA253UA Side Arm Mounts are designed to stand the antenna off the tower by 36 in. and to fit ROHN 25G tower sections with round 1.25 in. legs. Their 3 ft. length allows for the installation of heavy antennas that are capable of mounting to the supplied 2.250 in. diameter mounting tube. Although typically used to mount vertical antennas, they may also be used as a mounting point for many other antenna types, such as dishes, panels, horns, and so on. When your tower calls for a durable, galvanized side-arm mount, you may depend on one of these ROHN SA253UA Side Arm Mounts from DX Engineering to support your antenna project!
( 10 )
$279.99
ROHN Self-Supporting Concrete Base Plates
ROHN self-supporting tower base plates ensure the proper installation of your ROHN 25G or45G series tower when anchored to a concrete base with 5/8 x 12.0 in. bolts. ROHN concrete base plates are made from durable, 1/2 in. thick galvanized steel.
( 1 )
$349.99
ROHN 45G Tower Sections
ROHN 45G Tower Sections are true multi-use tower sections that provide excellent strength for applications up to 300 ft. The 45G tower sections are offered with heavy steel tube legs to satisfy a wide variety of needs under various conditions.
Not Yet Reviewed
$409.99
—
$485.99
ROHN 25G Tower Short Bases
ROHN 25G Tower Short Bases are designed to be embedded directly in concrete as the base section for a tower installation. They are set into a hole, and then concrete is poured around them. These ROHN 25G Tower Short Bases feature an 11.250 in. on center equilateral triangular design, and are constructed of extra heavy duty 1.25 in. OD steel tubing side rails with continuous solid steel rod bracing.
( 9 )
$323.99
ROHN Guy Bracket Assemblies
Keep your tower still with one of these ROHN Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each ROHN tower series. ROHN Guy Bracket Assemblies are built from quality steel and are galvanized, the same as the towers, and install in minutes with no modifications or disassembly of the tower required. Call DX Engineering to order your ROHN Guy Bracket Assemblies today!
( 5 )
$279.99
—
$429.99
ROHN BPL25G Tower Bearing Plates
ROHN BPL25G tower bearing plates are designed to bolt on top of a standard 25G section and have long legs to provide extra clearance for the installation of equipment. They are manufactured from quality, durable materials and have pre-drilled bolt patterns to fit either the 2 in. or 3 in. O.D. thrust bearings.
( 2 )
$319.99
ROHN Tower Adjustable House Brackets
ROHN Tower Adjustable House Brackets include the standard duty models for wall and eave bracing of 25G series towers that are installed as self-supporting or guyed. As with all ROHN tower accessories, these bracket models are all galvanized. ROHN Tower Adjustable House Brackets are completely adjustable, from 0 in. up to 36 in. offset depending on model, to handle most house wall bracketing installation of 25G tower where there is an overhanging eave to be cleared. These models HB25AG, HB25BG, and HB25CG are intended for use for a guyed or self-supporting ROHN 25G tower installations. Even for 25G towers that are installed with a sufficient base and design to be self-supporting, many municipalities require towers that are mounted next to a house to be bracketed to the house. ROHN Tower Adjustable House Brackets provide sufficient adjustments for virtually every tower house bracketing situation. The Universal Eave Bracket, model EB2525G, offers hinged connections which allow the tower leg clamps to remain perpendicular to the ground while bolt down supports rotate to lay flat along the pitched roof or under the pitched eave. These ROHN Tower Adjustable House Brackets are for self-supporting or guyed installations only and are not intended for bracketed only tower installations. For "Bracketed Tower" installations of ROHN 25G that are only bracketed and which are not self-supporting and will not be guyed, use the ROHN Heavy Duty Universal House Bracket model HBUTVRO.
( 11 )
$271.99
ROHN Hinged Tower Base Plates
ROHN Hinged Tower Base Plates allow you to mount your ROHN tower using six base bolts embedded in the concrete pier. ROHN hinged base plates enable the tower to be rotated up from the base during installation. Hinged tower base plates must be used with bracketed or guyed tower applications only.
( 8 )
$489.99
ROHN G-Series Wall Brackets
ROHN G-Series wall brackets are designed to provide lateral support to 25G, 45G, or 55G towers at a position of 18 in. to 36 in. from a wall. They are manufactured from galvanized steel for maximum strength and durability. They are predrilled to accept 5/8 in. diameter connectors on a wall at either 16 in. or 24 in. spacing.
( 2 )
$391.99
ROHN 55G Tower Short Bases
ROHN SB55G Tower Short Bases are designed to be embedded directly into concrete as the base section for a 55G tower installation. They are positioned in the ground and then have concrete poured around them to provide an anchored connection to the 55G main tower sections. The SB55G short bases use double-bolted joints, which are time-proven to be the best method of joining tower sections of this size for sturdiness and dependability. The ROHN SB55G short bases feature the 55G equilateral triangular design, and are constructed of extra heavy-duty steel tubing legs with a continuous solid-steel rod used in ROHN's signature Zig-Zag bracing. For heavy-duty service and solidly anchored towers, turn to DX Engineering for your ROHN SB55G Tower Short Bases!
( 1 )
$297.99
ROHN APL55G Tower Top Plates
ROHN APL55G Tower Top Plates are designed to bolt on top of a standard 55G section to provide a small platform for the installation of equipment. They are manufactured from quality, durable materials and have a square, pre-drilled bolt pattern typically used to mount beacon lights or lightning rods. These galvanized plates are the perfect cap for your ROHN tower when you are not using a tapered top, bearing plate, or other topping hardware. Contact DX Engineering for your ROHN APL55G Tower Top Plates!
Not Yet Reviewed
$479.99
ROHN Tower Work Platforms
ROHN Tower Work Platforms are essential for working long periods on the tower. They simply snap into place on ROHN G Series Towers. They are easily positioned and repositioned at any level, since no mounting bolts are required. Save your feet and legs from the pain of standing on the skinny cross bracing. ROHN Work Platforms (ROH-WP25G / WP45G / WP55G ) have been designed to meet the TIA 250 lbs. load requirement. This includes the weight of the safety equipment harness, lanyard and tools on your tool belt. Anything over that would require a review by a local engineer. Get your ROHN Tower Work Platforms from DX Engineering today!
( 9 )
$269.99
—
$449.99
ROHN Single Drive-In Base Plates
ROHN Single Drive-In Base Plates are for mounting a bracketed or guyed ROHN 25G tower directly onto tightly compacted soil, intended for short term and temporary installations. They are made of steel and are completely galvanized. As specified by ROHN, 25G towers mounted on Single Drive-In Base Plates MUST be bracketed or guyed at all times. Temporary steel guying may be necessary and is recommended during installation and dismantling.
Not Yet Reviewed
$436.99
ROHN Tower Bearing Plates
ROHN Tower Bearing Plates are designed to bolt on top of a standard section. They are manufactured from quality, durable materials and have pre-drilled bolt patterns to fit either the 2 in. or 3 in. O.D. thrust bearings.
( 1 )
$449.99
ROHN Pier Pin Tower Base Plates
ROHN pier pin tower base plates allow you to mount your 45G or 55G-series tower using 3/4 in. x 12 in. pier pins embedded in concrete. ROHN pier pin base plates cannot be used in self-supporting applications--they must be used for bracketed or guyed installations only. Be confident in your tower installation with ROHN concrete base plates.
Not Yet Reviewed
$379.99
ROHN RASK34 Accessory Shelf Kits
ROHN RASK34 Accessory Shelf Kits attach to ROHN's newly re-designed RSL towers on either section 3 or 4. These mounts connect to top-section tower legs at approximately 4 to 6 in. below the tower top. Each kit includes the plate and attachment hardware. A matching top plate, (RTP34), if required for your application, is sold separately. Accessory shelves are usually a required item for most hams. ROHN RASK34 Accessory Shelf Kits for their RSL towers are now available from DX Engineering.
Not Yet Reviewed
$473.99
ROHN Roof Mount Mats
ROHN Roof Mount Mats create a protective barrier between the roof surface and ROHN's non-penetrating FRM and NPPK mounts before Installation and will protect the roof against marring and gouging.
Not Yet Reviewed
$299.99
—
$459.99
ROHN BGK2GGX Tower Base Grounding Kits
Be sure that your tower installation is grounded according to national standards. ROHN BGK2GGX Tower Base Grounding Kits meet ANSI/TIA-222 REV. G grounding standards for ROHN 55G and 65G, guyed towers. Each kit includes enough hardware to complete the grounding of one (1) tower leg. Radio Amateurs frequently overlook or ignore national standards for grounding and lightning protection. All it takes is one lightning strike to prove that you can never have TOO MUCH lightning protection. Protect your tower, home and equipment to national standards. Order your ROHN BGK3GGX Tower Base Grounding Kits from DX Engineering and get that tower properly grounded! ROHN BGK2GGX Tower Base Grounding Kits include: 30 ft. of 7/16 in. 6x25 EIP IWRC RRL Wire Rope (1) 5/8 in. x 10 ft. Copper Clad Ground Rod (1) 3/4 in. Ground-Rod Clamp (1) Connection Clamp to 55G/65G Tubular Leg Note: Three (3) of these Tower Base Grounding Kits are included in each ROHN 55G, 65G Complete Guyed Tower Kit that is supplied with a flat or fixed rigid base. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$359.99
ROHN 25G/45G-Series Guy Anchor Grounding Kits
ROHN 25G/45G-Series Guy Anchor Grounding Kits are so important that they are included in each ROHN 25G and 45G complete tower package. However, when purchased from ROHN separately, this part number includes only the 30 ft. of 7/16 in. ground wire, three 10 ft. copper-clad 5/8 in. ground rods and three 3/4 in. ground rod clamps. The required R-CPC.5/.75 anchor rod clamps (three) that connect to the actual Guy Anchor Rod (and are needed to complete the grounding installation) are sold separately. Also, as these kits contain items 10 ft. in length, they can only ship truck freight. Tower grounding is the single most important effort in protecting your shack from lightning. Order these ROHN 25G/45G-Series Guy Anchor Grounding Kits from DX Engineering and improve your tower grounds.
Not Yet Reviewed
$399.99
Clearance
ROHN Torque Bars
ROHN Torque Bars are accessory items for Guy Bracket Assemblies, which mount in place of the Guy Bracket rings. These ROHN torque bars provide greater guy line control of tower twisting that may be caused by larger antenna wind loading. ROHN torque bars are recommended for guy bracket assemblies where the aim of beam antennas needs to be maintained by limiting tower twisting.
Not Yet Reviewed
$450.99
$360.79
ROHN Tower Base Bolts
ROHN Tower Base Bolts are galvanized steel bolts that are set into the concrete base pier when it is poured. These bolts anchor ROHN Tower Concrete Base Plates and Hinged Base Plates to the concrete pier.
( 4 )
$499.99
ROHN Tower Jacks
ROHN's new ROHN Tower Jacks are THE must-have tool for owners and installers of ROHN towers. These indispensable tools address the minor alignment issues that the tower installer may face. You may use ROHN tower jacks to apply leverage to pull stubborn sections together or to disengage stuck sections. They feature a hook for hanging on the section cross brace during use and a loop for attachment of a rope or quick link. ROHN tower jacks will also allow the installer to apply safe and consistent pressure to nudge section legs into alignment for easy mating. ROHN Tower Jacks work on the legs of ROHN 20, 25G, 45G to restore your ROHN tower sections to stackable condition. They also work for pull apart all of those models and 55G. The Safety and Instruction Manual (see the Documentation link) walks you through the use of this great new tool and gives examples of how you can use it to do your ROHN tower work more efficiently. If you've ever tried to install or take down even "gently used" towers, then you know they don't always want to cooperate. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Don't wrestle with those tower sections... use your ROHN jack on them! Buy your new ROHN Tower Jacks from DX Engineering today.
( 3 )
$399.99