Availability
ROHN Parts and Accessories
ROHN 55G Tower Sections
ROHN 55G Tower Sections provide excellent strength for applications up to the 400 ft. level. 55G tower sections are constructed with heavy steel tube legs to satisfy a wide variety of needs under various conditions. ROHN supports their 55G towers with a complete line of quality parts and accessories designed for an exact part-to-part match. ROHN 55G Tower Sections include the standard straight sections that are 10 feet in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. These 55G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. Towers constructed from ROHN 55G Tower Sections are especially useful in places where unusually high wind loading and height requirements exist. ROHN 55G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! When you require tough, well-engineered tower sections for that new antenna farm, order your ROHN 55G Tower Sections from DX Engineering! Features of all ROHN 55G Tower Sections: * Built on a 17 in. equilateral triangle design * High-strength tubular legs joined by ROHN's Zig-Zag bracing crossmembers * Double-bolted leg joints for strength and reliability * Continuous solid-round steel bracing used throughout * Bracing welded directly to tower legs * Each section is shipped with all required nuts and bolts * Completely hot-dip galvanized after fabrication
Not Yet Reviewed
$519.99
ROHN BA25G Tower Bearing Plates with Accessory Shelf
ROHN BAS25G Tower Bearing Plates with Accessory Shelf (rotator plate) are designed to be complete units with a top and bottom plate and integrated tubular legs. They are manufactured to be compatible with the 25G standard tower sections and are meant to be installed onto the topmost straight section of the tower. Plate-to-plate distance is 16 in. for rotor clearance. The ROHN BAS25G tower bearing plates with accessory shelf are drilled to accept the DXE-TB-300 or ROHN TB-3 thrust bearing on the top plate for use with an extended mast. The accessory shelf comes pre-drilled, making it compatible with many of today's most popular rotor models.
( 4 )
$509.99
ROHN JRM Series Non-Penetrating Roof Mounts
ROHN JRM Series Non-Penetrating Roof Mounts provide the option of installing antennas on flat roofs without physically attaching anything to the roof. No drilling, lag bolts, screws or other penetration of the roof is necessary. JRM Series mounts are galvanized for corrosion resistance and feature an integral mast. These roof mounts are used extensively in cellular, PCS, broadband, two-way radio and other applications. JRM Series roof mounts have 5 or 10 ft. masts, depending on model. They are designed to be ballasted with standard 16 in. concrete blocks (not included) for added stability. These roof mounts ship disassembled and have a square base when set up, with angle-steel frames to hold up to 12 concrete blocks. For added roof protection, ROHN's optional JRMPAD provides a fitted 3/8 in. cushion between your mount and the flat roof. When you need antennas atop your flat roof, but have no convenient way to mount them, these ROHN JRM Series Non-Penetrating Roof Mounts are just the ticket. Order yours from DX Engineering!
( 1 )
$539.99
—
$719.99
ROHN Flat Roof Mounts
ROHN Flat Roof Mounts bolt directly to your flat roof surface to support a guyed ROHN 25G or 45G tower. The flat roof location must be water-tight and reinforced to support tower/antenna weight. These bases require the tower to be guyed or bracketed and cannot be used as a self-supporting base plate. These tower bases use double-bolted attachment joints, which are proven to be the best method of joining tower sections for sturdiness and dependability. The associated tower can be used in guyed or bracketed configurations. Roof mounted tower options may limit potential height considerably by restricted guy line lengths and anchoring options. To mount your ROHN 25G or 45G Series tower to a flat roof, use one of these ROHN Flat Roof Mounts from DX Engineering.
Not Yet Reviewed
$569.99
ROHN PWM Pole Wall Mount
ROHN PWM Pole Wall Mount is designed to support most satellite, PCS, cellular and microwave antennas. It is intended to be mounted to a concrete block wall with the appropriate through-wall hardware, and allows various mounting pipe length and diameter with clamps that accept from 2.875 to 5.000 in. O.D. tubing. The mast wall offset can be adjusted to either 16, 22, or 28 in. The PWM is hot-dip galvanized after fabrication and is ground shippable. This double bracket and angle support is 32 in. wide and 36 in. from the top to the bottom wall bars. Optional hardware mounting kit HMK18M and inside mounting angles, FY77, are to be ordered separately.
Not Yet Reviewed
$599.99
ROHN Guy Bracket Assemblies
Keep your tower still with one of these ROHN Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each ROHN tower series. ROHN Guy Bracket Assemblies are built from quality steel and are galvanized, the same as the towers, and install in minutes with no modifications or disassembly of the tower required. Call DX Engineering to order your ROHN Guy Bracket Assemblies today!
( 5 )
$549.99
ROHN Guy Anchor Rods
ROHN Guy Anchor Rods allow for the attachment of up to five levels of guy wires. Some models are provided with a top plate for guy wire attachment and are designed to be installed in a concrete base. All are galvanized for extended service.
( 3 )
$539.99
ROHN Tower Bearing Plates
ROHN Tower Bearing Plates are designed to bolt on top of a standard section. They are manufactured from quality, durable materials and have pre-drilled bolt patterns to fit either the 2 in. or 3 in. O.D. thrust bearings.
( 1 )
$519.99
ROHN G-Series Self-Supporting Towers
ROHN G-Series Self-Supporting Towers offer an easy, low-cost solution to getting lightweight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you will minimize land-area usage. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger-series model provides greater wind loading capacity. Features of G-Series and GSR-Series Tower Kits include: * Completely hot-dip galvanized after fabrication * Cross bracing is formed by continuous solid-rod bracing fashioned into a zigzag pattern for strength * Pre-engineered loading charts meet varying individual specs and site conditions * Typical uses include: small dishes, broadband, security, and two-way radio * All towers have "fixed" bases (non-tilt) * ROHN GSR-Series towers feature Solid-Rod legs for extra strength ROHN Self-Supporting 25G, 45G, 55G and 45GSR-Series Tower Packages include: * One short-base section for embedment in concrete foundation * All Tower Sections and section joining hardware * One tapered top section with 25G, 45G and 55G packages (no top included for 45GSR towers) NOTE: Accessory Plates and Grounding Kits are sold separately ROHN Towers is famous around the world for providing quality, well-engineered tower products. You can feel confident when you order your ROHN G-Series Self-Supporting Towers from DX Engineering!
Not Yet Reviewed
$629.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$567.99