Availability
Rohn Towers & More Products
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in...
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in the industry and is committed to supplying the best! ROHN G-Series guyed towers provide one of the most cost-effective solutions in the industry. The towers feature high-strength steel tubing, incorporate Zig-Zag® bracing, and are hot-dip galvanized after fabrication. DX Engineering is your complete source for G-Series towers and accessories, including Rohn 25G towers, Rohn 45G towers, Rohn 55G towers, telescoping masts, base plates, guy wire, tower hardware,...
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in the industry and is committed to supplying the best! ROHN G-Series guyed towers provide one of the most cost-effective solutions in the industry. The towers feature high-strength steel tubing, incorporate Zig-Zag® bracing, and are hot-dip galvanized after fabrication. DX Engineering is your complete source for G-Series towers and accessories, including Rohn 25G towers, Rohn 45G towers, Rohn 55G towers, telescoping masts, base plates, guy wire, tower hardware, and more. Shop now!
ROHN Guy Anchor Rods
ROHN Guy Anchor Rods allow for the attachment of up to five levels of guy wires. Some models are provided with a top plate for guy wire attachment and are designed to be installed in a concrete base. All are galvanized for extended service.
( 3 )
$279.99
—
$539.99
ROHN RAL Series Tower Base Anchors
ROHN RAL Series Tower Base Anchors are designed specifically for RSL towers. Choose the proper product number based upon the bottom tower section. For example, RAL10 is the correct part when an RSL10 is the bottom tower section. RAL Series bases include a foundation template to insure the base is set in the proper place when embedding in concrete. These bases employ a double-nut system that is used for limited tower leveling after the foundation is poured. When you install an RSL tower, remember to order your ROHN RAL Series Tower Base Anchors from DX Engineering as well.
Not Yet Reviewed
$1,349.99
—
$1,799.99
ROHN Tower Base Bolts
ROHN Tower Base Bolts are galvanized steel bolts that are set into the concrete base pier when it is poured. These bolts anchor ROHN Tower Concrete Base Plates and Hinged Base Plates to the concrete pier.
( 4 )
$31.99
—
$499.99
ROHN 25G/45G-Series Guy Anchor Grounding Kits
ROHN 25G/45G-Series Guy Anchor Grounding Kits are so important that they are included in each ROHN 25G and 45G complete tower package. However, when purchased from ROHN separately, this part number includes only the 30 ft. of 7/16 in. ground wire, three 10 ft. copper-clad 5/8 in. ground rods and three 3/4 in. ground rod clamps. The required R-CPC.5/.75 anchor rod clamps (three) that connect to the actual Guy Anchor Rod (and are needed to complete the grounding installation) are sold separately. Also, as these kits contain items 10 ft. in length, they can only ship truck freight. Tower grounding is the single most important effort in protecting your shack from lightning. Order these ROHN 25G/45G-Series Guy Anchor Grounding Kits from DX Engineering and improve your tower grounds.
Not Yet Reviewed
$399.99
ROHN Guy Anchor Ground Clamps
ROHN Guy Anchor Ground Clamps are used in conjunction with their Guy Anchor Grounding Kits (ROH-AGK1GGX) to provide an efficient guy-anchor ground. These grounding clamps fit round members (rod) from 0.5 to 0.75 in. nominal diameter. They will clamp AWG 6 solid or up to 7/16 HS or EHS wire rope to the solid round rod. These clamps are of tinned bronze and stainless hardware. Tinned bronze is corrosion resistant and will last a long, long time. Their high-compression U-bolt really applies pressure to the conductor and anchor rod. This high pressure creates a low-resistance connection for effective grounding. Order ROHN Guy Anchor Ground Clamps from DX Engineering!
Not Yet Reviewed
$45.99
ROHN TBSAFETY Turnbuckle Safety Kits
ROHN TBSAFETY Turnbuckle Safety Kits include 45 ft. (15 ft. per guy anchor assembly) of 1/4 in. high strength guy wire to secure your turnbuckles and 6 matching 1/4 in. forged and galvanized U-bolt clips for final fastening of the safety wire on each of three guy anchors. In other words, use 15 ft. of guy wire and 2 clips on each guy-anchor assembly for protection against turnbuckle loosening or catastrophic failure. Turnbuckles, like all metal exposed to the elements, degrade over time. These safety kits thread through the turnbuckles and guy-line terminations (thimbles and eyes) in figure-8 fashion to make everything secure. Don't allow your tower to collapse due to turnbuckle failure. Order your ROHN TBSAFETY Turnbuckle Safety Kits from DX Engineering and make your tower installation safer!
Not Yet Reviewed
$71.99
ROHN TRTBAG Lag Bolt Kits
ROHN TRT-Series roof tripods are very popular. But the trip to the hardware store to get lag bolts for mounting them is not. When you order a TRT-36 or TRT-60 tripod you can order the lag bolts, too. ROHN TRTBAG Lag Bolt Kits contain the six lag bolts that you'll need to install your tripod. They even include 6 rubber-backed steel washers to seal under the bolt heads. These lag bolt kits include high-quality steel bolts that are galvanized for corrosion resistance and long life. Their shouldered hex heads are easily driven with box wrenches or sockets. These bolts are 2.00 in. long and 3/16 in. thread diameter with 3/8 in. hex heads. Whether using ROHN TRT tripod roof towers or some other permanent-mount brand we offer, these lag bolt kits will provide the strong, reliable attachment you need. Order your ROHN TRTBAG Lag Bolt Kits from DX Engineering today!
Not Yet Reviewed
$17.99
ROHN Self-Supporting Concrete Base Plates
ROHN self-supporting tower base plates ensure the proper installation of your ROHN 25G or45G series tower when anchored to a concrete base with 5/8 x 12.0 in. bolts. ROHN concrete base plates are made from durable, 1/2 in. thick galvanized steel.
( 1 )
$349.99
ROHN BPC25G Concrete Base Plates
These ROHN BPC25G Concrete Base Plates provide an easy and secure way to mount your guyed or bracketed ROHN 25G tower to a concrete pier, without the need for embedding a tower section in concrete. With these base plates, only a single 3/4 x 12 in. Pier Pin embedded in the standard concrete base is required to anchor the base of a ROHN 25G Series guyed tower. This is possible since lateral forces are minimized at the base of the tower. A slight pivoting of the pier pin anchored tower base is natural and allowable, as virtually all of the guyed tower forces are exerted vertically onto the concrete pier. BPC25G Concrete Base Plates are completely hot-dip galvanized after fabrication and are designed to work only with Rohn 25G Series straight tower sections. Setting the standard in towers for decades, Rohn has supported more ham antennas than any other brand. Start your tower build with one of these BPC25G Concrete Base Plates from DX Engineering!
( 6 )
$129.99
ROHN Tripod Roof Towers
ROHN tripod roof towers or TRTs feature a universal mast clamp that is capable of mounting masts with up to 1 3/4 in. diameters and swivel feet that adjust to the pitch of almost any roof. Installation is simple and fast with lag screws or bolts (not included) through the feet that securely anchor the towers for long, trouble-free service. ROHN tripod roof towers feature a lower mast support bracket and hot-dip galvanized construction for corrosion protection.
( 25 )
$129.99
—
$159.99
ROHN Flat Roof Mounts
ROHN Flat Roof Mounts bolt directly to your flat roof surface to support a guyed ROHN 25G or 45G tower. The flat roof location must be water-tight and reinforced to support tower/antenna weight. These bases require the tower to be guyed or bracketed and cannot be used as a self-supporting base plate. These tower bases use double-bolted attachment joints, which are proven to be the best method of joining tower sections for sturdiness and dependability. The associated tower can be used in guyed or bracketed configurations. Roof mounted tower options may limit potential height considerably by restricted guy line lengths and anchoring options. To mount your ROHN 25G or 45G Series tower to a flat roof, use one of these ROHN Flat Roof Mounts from DX Engineering.
Not Yet Reviewed
$379.99
—
$569.99
ROHN 55G Tower Short Bases
ROHN SB55G Tower Short Bases are designed to be embedded directly into concrete as the base section for a 55G tower installation. They are positioned in the ground and then have concrete poured around them to provide an anchored connection to the 55G main tower sections. The SB55G short bases use double-bolted joints, which are time-proven to be the best method of joining tower sections of this size for sturdiness and dependability. The ROHN SB55G short bases feature the 55G equilateral triangular design, and are constructed of extra heavy-duty steel tubing legs with a continuous solid-steel rod used in ROHN's signature Zig-Zag bracing. For heavy-duty service and solidly anchored towers, turn to DX Engineering for your ROHN SB55G Tower Short Bases!
( 1 )
$297.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
ROHN 65G Tower Short Bases
ROHN SB65GH Tower Short Bases are designed to be embedded directly into concrete as the base section for a 65G tower installation. They are set into a hole and then have concrete poured around them to provide a bolted connection to the 65G main tower section. The SB65GH short bases use quad-bolted joint plates, which are proven to be the best method of joining tower sections of this size for sturdiness and dependability. The ROHN SB65GH short bases feature the 65G equilateral triangular design and are constructed from extra heavy-duty steel tubing legs with continuous solid steel rod and ROHN's signature Zig-Zag bracing. For super-duty service and solidly anchored towers, turn to DX Engineering for your ROHN SB65GH Tower Short Bases!
Not Yet Reviewed
$872.99
ROHN 25G Non-Penetrating Roof Mount
Need to mount your ROHN 25G tower, but don't want to permanently anchor? ROHN's 25G Non-Penetrating Roof Mount is the answer. Designed to mount up to two 25G tower sections in self-supporting applications. The square-base design also accommodates ballast blocks in the 16 in. tray. Constructed from hot-dip galvanized steel for excellent corrosion resistance and high strength. Erect your tower today with the ROHN 25G Non-Penetrating Roof Mount from DX Engineering!
Not Yet Reviewed
$2,439.99
ROHN 55G Fold-Over Tower Kits
With their ROHN 55G Fold-Over Tower Kits, ROHN now offers lightweight, self-supporting towers that allow easy access to top-mounted components so you don't have to climb the tower. With one of these tower kits, the top can be lowered down to near-ground level for maintenance, or the installation of new hardware, in just minutes! This eliminates the need to work at dangerous heights. When your work is complete, the tower is easily returned to the upright position and locked into place. ROHN starts with a ROHN solid-rod 45GSR base with a welded hinge at the top. A ROHN 55G tower provides the upper section. These fold-over tower kits include all necessary tower sections, a complete hinge section, a boom, and a complete winch kit. You add the anchors, concrete work, mast, and the antennas. 55G rotator and accessory shelves are available separately to provide mounting for most equipment. Stop climbing your old tower! Get one of these ROHN 55G Fold-Over Tower Kits from DX Engineering and keep your feet safely on the ground!
Not Yet Reviewed
$10,069.99
—
$11,429.99
ROHN H2545 Erection Fixture Heads
ROHN Products H2545 Erection Fixture Heads provide a solid anchor point for the pole portion of the "gin pole," also known as a tower erection fixture. These high-quality steel products are the key to safely erecting or servicing ROHN 25G and 45G towers. ROHN has been the trusted name of providing quality engineered utility structures since 1948. These parts are tough and it's hard to imagine damaging one of them. However, if your fixture head has been misplaced, stolen, or damaged, then this is the replacement you need. You may also consider using this well-designed part as the basis for a custom fixture of your own. They accept 2.0 in. outside diameter steel poles and are designed to fit ROHN 25G and 45G tower legs. Whether you are looking for a new or replacement part, ROHN Products H2545 Erection Fixture Heads, now available from DX Engineering, will help you get your tower work completed!
Not Yet Reviewed
$1,039.99