Availability
Rohn Towers & More Products
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in...
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in the industry and is committed to supplying the best! ROHN G-Series guyed towers provide one of the most cost-effective solutions in the industry. The towers feature high-strength steel tubing, incorporate Zig-Zag® bracing, and are hot-dip galvanized after fabrication. DX Engineering is your complete source for G-Series towers and accessories, including Rohn 25G towers, Rohn 45G towers, Rohn 55G towers, telescoping masts, base plates, guy wire, tower hardware,...
ROHN Towers has been the world leader in tower design and manufacturing for decades! The company maintains one of the largest manufacturing and staging facilities in the industry and is committed to supplying the best! ROHN G-Series guyed towers provide one of the most cost-effective solutions in the industry. The towers feature high-strength steel tubing, incorporate Zig-Zag® bracing, and are hot-dip galvanized after fabrication. DX Engineering is your complete source for G-Series towers and accessories, including Rohn 25G towers, Rohn 45G towers, Rohn 55G towers, telescoping masts, base plates, guy wire, tower hardware, and more. Shop now!
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
ROHN 55G Tower Sections
ROHN 55G Tower Sections provide excellent strength for applications up to the 400 ft. level. 55G tower sections are constructed with heavy steel tube legs to satisfy a wide variety of needs under various conditions. ROHN supports their 55G towers with a complete line of quality parts and accessories designed for an exact part-to-part match. ROHN 55G Tower Sections include the standard straight sections that are 10 feet in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. These 55G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. Towers constructed from ROHN 55G Tower Sections are especially useful in places where unusually high wind loading and height requirements exist. ROHN 55G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! When you require tough, well-engineered tower sections for that new antenna farm, order your ROHN 55G Tower Sections from DX Engineering! Features of all ROHN 55G Tower Sections: * Built on a 17 in. equilateral triangle design * High-strength tubular legs joined by ROHN's Zig-Zag bracing crossmembers * Double-bolted leg joints for strength and reliability * Continuous solid-round steel bracing used throughout * Bracing welded directly to tower legs * Each section is shipped with all required nuts and bolts * Completely hot-dip galvanized after fabrication
Not Yet Reviewed
$519.99
ROHN TBSAFETY Turnbuckle Safety Kits
ROHN TBSAFETY Turnbuckle Safety Kits include 45 ft. (15 ft. per guy anchor assembly) of 1/4 in. high strength guy wire to secure your turnbuckles and 6 matching 1/4 in. forged and galvanized U-bolt clips for final fastening of the safety wire on each of three guy anchors. In other words, use 15 ft. of guy wire and 2 clips on each guy-anchor assembly for protection against turnbuckle loosening or catastrophic failure. Turnbuckles, like all metal exposed to the elements, degrade over time. These safety kits thread through the turnbuckles and guy-line terminations (thimbles and eyes) in figure-8 fashion to make everything secure. Don't allow your tower to collapse due to turnbuckle failure. Order your ROHN TBSAFETY Turnbuckle Safety Kits from DX Engineering and make your tower installation safer!
Not Yet Reviewed
$71.99
ROHN 65G Tower Sections
ROHN 65G Tower Sections provide tremendous strength for applications up to the 500 ft. level. These 65G tower sections are constructed with heavy steel tube legs to satisfy a wide variety of needs under various conditions. Each leg features a welded joining plate with four bolt holes to mate to the next section. ROHN also supports their 65G towers with a complete line of quality parts and accessories designed for an exact part-to-part match. ROHN 65G Tower Sections include the standard straight sections that are 10 ft. long. There are also 6520G sections that are 20 ft. in length. Special short sections are available to suit your embedded tower-base needs. These 65G Tower Sections are offered with several different antenna mounting solutions to accommodate various masts, dishes, and other antenna mounting requirements. Towers constructed of ROHN 65G Tower Sections are especially useful in places where unusually high wind loading and height requirements exist. ROHN 65G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! When you require well-engineered tower sections of superior strength for that new tower installation, order ROHN 65G Tower Sections from DX Engineering! Features of all ROHN 65G Tower Sections: * Built on a 24.25 in. equilateral triangle design * High-strength tubular legs joined by ROHN's Zig-Zag bracing crossmembers * Quad-bolted leg joints for extra strength and reliability * Continuous solid-round steel bracing used throughout * Bracing welded directly to tower legs * Each section is shipped with all required nuts and bolts * Completely hot-dip galvanized after fabrication
Not Yet Reviewed
$1,519.99
—
$2,024.99
ROHN Telescoping Masts
ROHN Telescoping Masts are available in a variety of heights to suit your specific application. They are manufactured from steel and then galvanized for corrosion protection and come assembled with mounting hardware. All telescoping mast installations must be guyed or bracketed (sold separately) and should be performed by experienced or licensed installers. NOTE: Unless specifically listed as otherwise, these masts are over-weight and over-length for our standard UPS or FedEx free shipping. Freight charges may apply. When you need antenna supports, ROHN Telescoping Masts, from DX Engineering, are the time-tested solution!
( 93 )
$95.99
—
$289.99
ROHN Guy Anchor Rods
ROHN Guy Anchor Rods allow for the attachment of up to five levels of guy wires. Some models are provided with a top plate for guy wire attachment and are designed to be installed in a concrete base. All are galvanized for extended service.
( 3 )
$279.99
—
$539.99
ROHN Guy Bracket Assemblies
Keep your tower still with one of these ROHN Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each ROHN tower series. ROHN Guy Bracket Assemblies are built from quality steel and are galvanized, the same as the towers, and install in minutes with no modifications or disassembly of the tower required. Call DX Engineering to order your ROHN Guy Bracket Assemblies today!
( 5 )
$279.99
—
$549.99
ROHN Flat Roof Mounts
ROHN Flat Roof Mounts bolt directly to your flat roof surface to support a guyed ROHN 25G or 45G tower. The flat roof location must be water-tight and reinforced to support tower/antenna weight. These bases require the tower to be guyed or bracketed and cannot be used as a self-supporting base plate. These tower bases use double-bolted attachment joints, which are proven to be the best method of joining tower sections for sturdiness and dependability. The associated tower can be used in guyed or bracketed configurations. Roof mounted tower options may limit potential height considerably by restricted guy line lengths and anchoring options. To mount your ROHN 25G or 45G Series tower to a flat roof, use one of these ROHN Flat Roof Mounts from DX Engineering.
Not Yet Reviewed
$379.99
—
$569.99
Clearance
ROHN Torque Bars
ROHN Torque Bars are accessory items for Guy Bracket Assemblies, which mount in place of the Guy Bracket rings. These ROHN torque bars provide greater guy line control of tower twisting that may be caused by larger antenna wind loading. ROHN torque bars are recommended for guy bracket assemblies where the aim of beam antennas needs to be maintained by limiting tower twisting.
Not Yet Reviewed
$450.99
$360.79
ROHN RSL Self-Supporting Towers
ROHN RSL Self-Supporting Towers are strong and lightweight towers designed for use in Amateur Radio, broadband, public safety and security applications. RSL towers can reach above line-of-site obstacles such as treetops, hilly terrain and buildings. RSL towers are shipped knocked down to reduce shipping costs and time. Bases and accessories are sold separately. - Please CLICK on the title of the product(s) listed for the Overview, Specifications, a complete Description and Suggested Parts. Links to instruction manuals also appear in the Documentation section.
Not Yet Reviewed
$1,599.99
—
$7,569.99
ROHN Torque Arm Stabilizer Assemblies
Keep your tower from twisting with one of these ROHN Torque Arm Stabilizer Assemblies. These devices are typically used at the top guying level with six guy lines to prevent large torsional forces on the tower that are caused during high winds on tower mounted items, especially side mounted dishes or very long boom beams, that have high wind surface areas. These assemblies are ideal for keeping tight-beam microwave links in alignment. Multiple torque arm stabilizer assemblies may be needed at different levels on taller towers. These assemblies are sized to fit correctly around the tower legs for the proper attachment of guy wires for each specific ROHN Guyed Tower series. They provide for 6-way guying at any G series tower joint. ROHN Torque Arm Assemblies are built from quality steel and are galvanized, the same as the tower sections, and install in minutes when joining tower sections, with no modifications to the sections being necessary. Call DX Engineering to order ROHN Torque Arm Stabilizer Assemblies.
Not Yet Reviewed
$781.99