Availability
Sotabeams Audio
SOTAbeams Speech Compressors
SOTAbeams Speech Compressors are available in two versions; ready-built or as an easy-to build kit with a build time of approximately 40 minutes. Unleash your DX potential! The FT-817 and FT-818 are great little radios, but their SSB speech power does lack punch. Here is a fantastic external AF dynamic compressor that will aid readability and maximize the performance of your radio, which is essential when using QRP. Speech Compressors work by raising the average level of your audio signal, giving greater "talk power" with an apparent improvement of up to 6 dB! SOTAbeams Speech Compressors are Plug- and-Play! They have a modular 8-pin jack for your Yaesu microphone and a modular cable is included to connect the unit to the radio microphone input. The compressor function can be switched on or off, and the module draws its DC power directly from the transceiver (approximately 10mA). The compression level is adjustable and modifications to your microphone or transceiver are not required! An additional, very useful feature of this compressor unit is a tuning tone. Press the Down button on the microphone while the PTT is depressed to activate the tone, which is useful for adjusting tuners and antennas. The SOTAbeams Speech Compressors are also suitable for use with all versions of Yaesu FT-900, FT-857, FT-897 and FT-450 transceivers. IMPORTANT: Speech compression cannot be used on FM mode.
( 4 )
$69.99
—
$95.99
SOTAbeams LASERBEAM DSP Filter Modules
SOTAbeams LASERBEAM DSP Filter Modules work much better at reducing QRM than mechanical or analog filters. SOTAbeams applies special algorithm-based software to create well-defined passbands with steep contours. SOTAbeams offers their General Purpose, CW and SSB filter modules with switchable passbands. For example, the CW module (SBM-LB-MODULE-CW) may be used with either a 550 to 850 Hz passband, or a wider 300 to 1300 Hz passband. You choose the passband based on your own band conditions. Their SSB module (SBM-LB-MODULESSB) features passbands of either 300 to 2700 Hz or 300 to 2400 Hz. SOTAbeams designers have determined that these passbands work very well for SSB voice filtering. They offer their General Purpose filter module (SBM-LB-MODULE-GP) to accommodate both CW and SSB. These modules have selectable passbands of 550 to 850 Hz and also 300 to 2700 Hz. In this way you may limit CW or SSB QRM that is outside the selected audio passband. Be advised that these modules are NOT of the plug-in style. To use them takes some knowledge and soldering skill. You will also have to add an enclosure, if desired, as well as external parts not supplied with the PCBs. As designed, these modules will drive typical "low power" earbuds all by themselves. They will also drive audio amplifiers or amplified speakers. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Are you tired of battling the QRM? Order SOTAbeams LASERBEAM DSP Filter Modules from DX Engineering to hold those signals at bay!
( 1 )
$33.59
—
$55.99
SOTAbeams WOLF-100 WOLFWAVE Advanced Audio Processor
SOTAbeams WOLF-100 WOLFWAVE Advanced Audio Processor is a powerful tool for demanding communications applications. Adaptive DSP noise reduction, audio band pass filtering, Morse decoding and automated hearing loss correction are only four of the tasks this incredible device can accomplish. A rotary-encoder, with push-to-set control, accesses adjustments and simple menu system selections on the attractive OLED screen, which also provides a spectral display of the real-time audio passband. WOLFWAVE uses a high performance 32-bit ARM Cortex M7, the highest performance processor of the energy-efficient ARM M-series. This fantastic DSP processing power is paired up with a 20-bit CODEC (analog to digital - digital to analog conversion) and a 1.6 watt amplifier for superb audio performance. So easy to use and so amazing to hear, this in-line audio unit simply connects to the headphone jack of any radio. Connect your headphones or an external speaker to WOLFWAVE and transform your radio listening experience. Here are some of the very useful, menu-selectable functions and features of WOLFWAVE: -Fully adjustable audio band pass filtering from 50 Hz to 5 kHz - instantly adjustable for voice, data and CW -Bright, clear, real-time audio spectrum display to see what's happening in your radio passband -State-of-the-art adaptive DSP noise reduction with 100 levels plus advanced control functions -Morse Decoder – CW Reader added in firmware update – click "More Details" for the WOLFWAVE Firmware page link -Adaptive DSP tone eliminator gets rid of annoying carriers, but leaves the CW -Age-related hearing loss correction using ISO 7029:2017 median hearing-loss curves for males or females – menu selectable -One-touch bypass function to instantly hear the comparison improvement by WOLFWAVE -Memories to easily store and recall your favorite settings -Audio test generator including two-tone test mode, sine, square and triangular wave -Experimental CW regenerator to enjoy noise-free CW QSOs -On-screen help and menu system that is so easy to use -Tuning/Overload dual color LED indicator for easy tuning and input level adjustments -User updatable firmware by USB to keep up with the latest WOLFWAVE developments -Separate speaker and headphone outputs are excellent for exhibition stations -Speaker output: 1.1 Watts @ 10% THD [speaker output must not be grounded -Headphones operation supported with 5Vdc USB power from laptop or USB power pack -Full output power for speaker operation achieved from 7 to 18 Vdc external input -2.1 mm jack for DC power input (13.8 Vdc power supply sold separately) -Low quiescent current drain of only 60 mA; battery-friendly! -Small size (WHD) 4.13 x 3.15 x 1.06 in. (105 x 80 x 27 mm) -Lightweight: 3.5 oz. (140 g) -WOLFWAVE is supplied with one USB A to USB micro-B data power cable and one Audio patch cable with 3.5mm plugs Click "More Detail" for additional information on all of the features of this groundbreaking device. Order your WOLFWAVE Advanced Audio Processor from DX Engineering – the exclusive SOTAbeams North America dealer.
( 11 )
$409.99
SOTAbeams Inline Audio Ground Loop Isolator
SOTAbeams Inline Audio Ground Loop Isolator can solve some audio problems caused by RF on the line. This is passive audio transformer device that breaks the ground loop that may be contributing to RFI in your receive audio. Here are the particulars: •Ideal for connecting portable devices including smartphones, tablets and laptops to external sound gear •In-line dual isolation transformer eliminates hum, buzz and other noise caused by ground loops, while providing protection to the portable device •Stereo in and out Input: 1 x 3.5 mm male stereo plug Output: 1 x 3.5 mm female stereo jack •Isolation transformer housed in a slim, in-line cylindrical metal enclosure for best shielding •Highly flexible cable is terminated with rugged molded connectors with strain reliefs •Input/output impedance: 600 Ohms - perfect for all line level audio devices •Frequency range: 0 - 0.5dB (input to output), 50 Hz - 20 kHz •Distortion: <0.02% @ 1 kHz, 0 dBu •Cable Length: 11 in. (0.3 m)
( 1 )
$23.99
SOTAbeams LASERBEAM-VARI Digital Variable Bandwidth Audio Filter Module
SOTAbeams LASERBEAM-VARI Digital Variable Bandwidth Audio Filter Module - the perfect addition to your project or your existing radio. Unlike analogue filters, digital filters provide near-perfect characteristics. Because of the way that they are implemented, they are better than analogue filters in almost every way! LASERBEAM-VARI Modules been designed for ease of use. One simple control allows you to continuously vary the bandwidth or the center frequency of the filter. All settings produce the same great filters with flat pass bands and steep skirts. Whether you need passband tuning, filters for digital modes and APRS, low pass filters or CW filters, the LASERBEAM-VARI does it all in one compact module. Dial up EXACTLY the filter you need. •Bandwidth 200Hz - 3500Hz •Max Passband 200Hz - 3500Hz •Indicator outputs for tuning mode (bandwidth or center-frequency) •On board overload indicator •User-defined power-up filter settings •Two gain settings Great for all modes: SSB-CW-Digi-AM-NBFM. A single clickable rotary encoder provides the main functionality. Click to switch between variable bandwidth or center frequency. Store your favorite setting as a power-up default. Simple but very effective, this filter is continuously variable and always has near perfect characteristics unattainable with conventional analogue techniques. Kit includes: •filter module PCB (ready-built), •Bourns rotary encoder (6mm diameter shaft) , •3 x LEDs, •2 x 10 way headers, •7 resistors, 2 capacitors NOTICE: NO enclosure or instructions are provided. All construction data is online at SOTAbeams.co.uk Simple to use: the instructions are downloadable here. The instructions contain information to allow users to control the filter using a microcontroller. Example filters These plots have been made by testing a LASERBEAM-VARI using a professional audio spectrum analyzer (QuantAsylum QA400). Remember that the LASERBEAM-VARI can synthesize any bandpass filter that you want (200-3500Hz). Click on the links below to see the filters. •Typical SSB filter •Typical 200Hz CW Filter •Typical 200Hz CW filter but at 3kHz •Wide filter
( 1 )
$65.99