Availability
Times Microwave Systems
Since 1948, Times Microwave Systems has been a leader in coaxial cable technology. The company was instrumental in the development of military specifications and has...
Since 1948, Times Microwave Systems has been a leader in coaxial cable technology. The company was instrumental in the development of military specifications and has been a top coaxial supplier to the military and aerospace industries ever since. Why not bring that same proven Times Microwave Systems quality and performance to your amateur radio setup? DX Engineering is proud to offer a full line of Times Microwave Systems coaxial cable, coaxial connectors, coax cable cutters and prep tools, and other coaxial accessories. Don’t compromise your ham radio setup with inferior coax. Get top-quality, aerospace-caliber...
Since 1948, Times Microwave Systems has been a leader in coaxial cable technology. The company was instrumental in the development of military specifications and has been a top coaxial supplier to the military and aerospace industries ever since. Why not bring that same proven Times Microwave Systems quality and performance to your amateur radio setup? DX Engineering is proud to offer a full line of Times Microwave Systems coaxial cable, coaxial connectors, coax cable cutters and prep tools, and other coaxial accessories. Don’t compromise your ham radio setup with inferior coax. Get top-quality, aerospace-caliber coaxial from Times Microwave Systems today!
Times Microwave Systems® Bulk Coaxial Cables
Times Microwave Systems Bulk Coaxial Cables are recognized as superior RF cable products. The standard Times Microwave LMR® is a UV-resistant polyethylene jacketed cable designed for 20-year service in outdoor use. Depending upon size, LMR® cable has a solid copper or copper clad solid aluminum center conductor. Their bending and handling characteristics are significantly better than air-dielectric and corrugated hard line cables. LMR-DB® cable has a waterproofing compound to prevent moisture intrusion after a minor abrasion. Times Microwave Systems EZ Series and TC Series connectors are suitable for use on standard LMR® and LMR-DB® cables. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center and a rubber jacket (black thermoplastic elastomer) designed for repeated bending. Times Microwave TC Series crimp connectors are designed for use on LMR® UltraFlex cables. LMR®'s RF shielding is typically 50 dB greater than standard coax. The copper shield and multi-ply bonded foil outer conductor is rated conservatively at greater than 90 dB. That's better than 180 dB isolation between two adjacent cables. A wide variety of connectors are available for LMR cables, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimped outer attachment using standard hex-crimp methods. Times Microwave Systems is a premier supplier of coaxial cable products worldwide. Only Times offers a range of products specifically developed to perform as needed in the most diverse range of environments. Times Microwave Systems has over 60 years of experience in building the highest-quality cables. Order LMR® coaxial cables from DX Engineering and put Times Microwave Systems Bulk Coaxial Cables to work for you! LMR® is a registered trademark of Times Microwave Systems.
( 100 )
$0.84
—
$1,139.99
Times Microwave Systems® Coaxial Connectors
Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
( 34 )
$5.09
—
$136.99
Times Microwave TK-400EZ 4-Piece LMR-400 Coax Cable Preparation Tool Kits
Times Microwave TK-400EZ 4-Piece LMR-400 Coax Cable Preparation Tool Kits include the necessary tools for installing Times Microwave crimp style connectors on LMR400 cables. This cable preparation tool kit contains the appropriate cable cutter, strip tool, crimp tool with crimping die, and tool bag. * Tool type: RF Coaxial Connector attachment tool kit * Kit includes: CCT-01 / CT400 / 300 / CST400 * Works with Times Microwave Crimp Style Connectors * Compatible Cable Type: LMR-400 * Kit Weight: 2.9 lbs. EZ says it all. For easy installation of Times Microwave crimp style connectors, order one of these Times Microwave TK-400EZ 4-Piece LMR-400 Coax Cable Preparation Tool Kits from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$469.99
Times Microwave Systems® Coaxial Cable Prep Tools
Times Microwave Systems Coaxial Cable Prep Tools are your best solutions for installing Times Microwave Systems coaxial connectors. This series of tools include strippers, drop cutters, mid-span strippers and complete preparation kits for Times Microwave Systems cable products. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The quality of Times Microwave Systems coaxial cable products is known worldwide. Ensure the quality of your connector installation with Times Microwave Systems Coaxial Cable Prep Tools from DX Engineering. LMR® is a registered trademark of Times Microwave Systems.
( 11 )
$143.99
—
$579.99
Times Microwave Systems® Coaxial Connector Crimping Tools
Times Microwave Systems Coaxial Connector Crimping Tools are specifically sized for Times Microwave Systems cables and crimped-shield coaxial connectors. Their CT-U ratcheting universal crimp handle uses interchangeable dies (same ones as HX-4) selected by cable type. Or, their CT series ratcheting crimp tools with non-removable dies work with Times cables from the smallest to the largest. Simply choose the tools or dies by cable type for the crimped shield connectors you need. Attach your Times Microwave Systems coaxial connectors with genuine Times Microwave Systems Coaxial Connector Crimping Tools from DX Engineering. LMR® is a registered trademark of Times Microwave Systems.
( 3 )
$203.99
—
$503.99
Times Microwave Systems® Self-Bonding Silicone Weather Sealing Kits
Times Microwave Systems Self-Bonding Silicone Weather Sealing Kits will protect RF connections from the elements and prevents the intrusions of moisture from snow, ice, or rain. This self-bonding silicone tape is a great, no-mess alternative to vinyl mastic or butyl rubber sealing kits. Proper weather sealing is a critical step to maintaining the long-term reliability of RF connections, order a Times Microwave Systems Self Bonding Silicone Weather Sealing Kit from DX Engineering today! Additional Features and Specifications: * Operating Temperature Range: -65 to +500 degrees Fahrenheit (-54C to +260C) Continuous * Dielectric Strength: 0.010 in. - 0.030 in. 400 VPM * Cold Brittle Point, Maximum: -85 degrees Fahrenheit (-65C) * Tensile Strength: 700 PSI Minimum LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$54.99
Times Microwave Systems® Coax Cable Cutters
Times Microwave Systems Coax Cable Cutters include different styles of cable cutting tools that are appropriate for square-cutting (shearing) many types of coaxial cables. These cutting tools are suitable for a wide range of coaxial cables from 0.100 to 0.595 in. diameter. Each tool quickly and easily square-cuts the cable end, preparing it for connector termination. Unlike other cutting tools, these tools leave no metallic residue on the dielectric, so wire brushing is not necessary. You know how important it is to properly prepare your coax for connector attachment. These Times Microwave Systems Coax Cable Cutters, now available from DX Engineering, will always cut your coax correctly… the very first time! LMR® is a registered trademark of Times Microwave Systems.
( 7 )
$64.99
—
$67.99
Times Microwave Systems® Mid-span Coaxial Grounding Kits
Times Microwave Systems Mid-span Coaxial Grounding Kits let you ground the coaxial shield to any convenient location with a ground lug. This includes most grounding clamps, plates and fixtures. For towers, an additional tower leg clamp is usually required. After stripping the outer jacket with a mid-span stripping tool, a pre-formed metal strap is applied to the braid/shield and tightened down. This strap is then electrically and mechanically connected to the ground source with a ground lead assembly, providing an excellent ground for the shield. These mid-span shield-grounding kits include: (1) Pre-formed tinned copper ground strap (1) Ground lead assembly (2) 1/4 in. brass lock-washers (2) 1/4 in. brass nuts (1) Roll 2-1/2 in. x 24 in. (610mm) butyl mastic (1) Roll 3/4 in. x 20 ft. (6.1m) PVC tape (1) Heat shrink tube (1) Field-crimp 3/8 in. 2-hole lug (2) 3/8 in. x 1-1/4 in. slotted bolts (2) 3/8 in. lock-washers (2) 3/8 in. nuts (2) 3/8 in. flat-washers (1) Detailed assembly instructions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Their included weatherproofing materials provide long-lasting environmental protection to help maintain a reliable ground for your coax. Shop DX Engineering for Times Microwave Systems Mid-span Coaxial Grounding Kits! LMR® is a registered trademark of Times Microwave Systems.
( 4 )
$34.65
—
$45.99
Times Microwave WSB Series Weather Seal Boots
Times Microwave WSB Series Weather Seal Boots work with most of the popular Times Microwave EZ crimp connectors. These boots are available for LMR-195, LMR-200, LMR-240/DXE-8X and equivalents, 0.405 in. diameter coax such as LMR-400, RG-8, DXE-400Max, DXE-213 and equivalent, and LMR-600 size coax. * Use TMV-WSB-195-200 for LMR-195 or LMR-200 * Use TMV-WSB-240 for LMR-240 and equivalent * Use TMV-WSB-400 for LMR-400 and equivalent * Use TMV-WSB-600 for LMR-600 and equivalent These soft, silicone-boot weatherproofing kits replace older weatherproofing methods. They require no heat and only simple and easy hand assembly for valuable time saving in the field. Once installed, the boot provides strain relief to the crimp connection by reducing flexure. WSB kits are IP67 rated and both RoHS and REACH Compliant. Supplied in a convenient 10 pack, WSB kits contain four pouches of silicone lubricant to better facilitate installation of the boot. WSB Series weather seals: * Are ISO 9001 Certified * Provide combination weather seal and strain relief * Eliminate the need for a heat gun to shrink the standard heat shrink sleeve * Fit the most popular Times Microwave EZ connectors * Are IP-67 rated for water ingress Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Weather is the worst enemy of your feedline. Order Times Microwave WSB Series Weather Seal Boots and give your coax the "seal" of approval! LMR® is a registered trademark of Times Microwave Systems.
( 3 )
$19.99
—
$30.95
Times Microwave Systems® Coaxial Cable Hoisting Grips
Times Microwave Systems Coaxial Cable Hoisting Grips provide an effective method for lifting coaxial cable to the top of a structure, where it may then be tied off to support the cable's weight. Cable hoisting grips will not crush or deform the cable being lifted, but easily release the cable when desired. They are available in several sizes to hoist a multitude of cable types. Don't risk dropping your coax or using destructive methods to loft it. Order Times Microwave Systems Coaxial Cable Hoisting Grips from DX Engineering and hoist your cable the easy way! LMR® is a registered trademark of Times Microwave Systems.
( 4 )
$28.99
—
$35.99
Times Microwave TK-240EZ 4-Piece Coaxial Cable Tools Kits
Times Microwave TK-240EZ 4-Piece Coaxial Cable Tools Kits include the necessary tools for installing Times Microwave X-Series Crimp Connectors on LMR-240/200/195 cables. This cable preparation tool kit contains the appropriate cable cutter, strip tool, crimping tool with dies and is housed in a soft storage case. Additional Features and Specifications: * Kit Includes: CT-240/200 Crimping Tool, CST-195/200 Prep Tool, CST-240A Prep Tool, CCT-03 Cable Cutter * Hex Dies Included: 0.128 in./ 0.213 in./ 0.255 in. * Works With Times Microwave X-Series Crimp Connectors * Compatible cable types: LMR-240/200/195 LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$576.99
Times Microwave Systems® Replacement Coax Cable Prep Tool Blades
Times Microwave Systems Replacement Coax Cable Prep Tool Blades are used to restore efficient operation to their coaxial cable preparation tools. Replacements are available for their CCT-01 and CCT-02 cable cutters and for their cable strippers. Cable cutting and stripping tools perform best when blades are sharp. Dull or beat-up blades cause unreliable cuts and will prevent easy cable installation. Having Times Microwave replacement blades available will ensure consistent and speedy cable preparation. Order your own Times Microwave Systems Replacement Coax Cable Prep Tool Blades from DX Engineering to keep your cable preparation tools in great shape! LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$73.99
Times Microwave Systems® Coaxial Connector Crimp Rings
A package of Times Microwave Systems Coaxial Connector Crimp Rings is very handy when you lose one, step on one, or otherwise find yourself short on crimp rings. Sold in a package of ten, these genuine Times Microwave Systems parts are a critical component for connector assembly. Choose your part number based on cable type. Never be without sufficient coax connector crimp rings! Order Times Microwave Systems Coaxial Connector Crimp Rings from DX Engineering. LMR® is a registered trademark of Times Microwave Systems.
( 6 )
$9.59
—
$9.99
Times Microwave Systems® Center Conductor De-Burring Tools
Times Microwave Systems Center Conductor De-Burring Tools remove burrs from solid center conductors on 50 and 75 ohm braided-shield and hardline cables, making center-pin installation much easier. These tools work on solid copper or copper-clad aluminum conductors. Although they will work on any solid center conductor from 0.050 to 0.230 in., they are ideally suited for LMR®-240 through LMR®-600 Times Microwave Systems cables. Their large, plastic, screwdriver-type handle provides precise leverage while rotating the tool to remove burrs. They are ready to use and their small 4.75 in. length makes these tools handy tool-belt companions. Order your own Times Microwave Systems Center Conductor De-Burring Tools from DX Engineering and make connector installation so much easier! LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$119.99
Times Microwave Systems® Hex Crimp Dies
Times Microwave Systems Hex Crimp Dies are used with their HX-4 crimp handle to compress crimp ferrules on their coaxial cable crimp shield connectors. The ferrules make a secure mechanical connection between the connector and its associated coaxial cable. Simply choose your die based on the Times crimp shield connector you wish to use. These heavy-duty steel dies are sized for Times Microwave Systems' TC and EZ Series crimp shield connectors. Order your Times Microwave Systems Hex Crimp Dies from DX Engineering… today! LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$305.99
Times Microwave Systems® Small-Coax Installation Tool Kits
Times Microwave Systems Small-Coax Installation Tool Kits were developed for LMR®-195, 200 and 240 cables. These kits include a cable shear, deburring tool, prepper/stripper and crimping tool. They contain all you need to prepare the cable and install Times Microwave Systems crimp connectors. Use their TK-195-200 kit for LMR-195 and 200 size cables. These kits include Times CCT-02, DBT-U, CST-195/200, CT-240/200/100 tools and a convenient tool pouch. For LMR-240 cable, use their TK-240 kit. These kits include their CCT-02, DBT-U, CST-240A, CT-240/200/100 and their tool pouch. These tools and their associated cables and connectors are perfect for mobile installations, jumpers, instrumentation cables, probe cables and many other uses where smaller coaxial cables are desirable. Make cable fabrication so much easier! Order Times Microwave Systems Small Coax Installation Tool Kits from DX Engineering. LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$560.99