Availability
Unified Microsystems Parts and Accessories
Unified Microsystems BevFlex-4X and BevFlex-4X/Q Reversible Receive Antenna System
Unified Microsystems BevFlex-4X Reversible Receive Antenna System is a very versatile two-direction low band receiving antenna. This is the updated and improved version of the W8GNM revolutionary design that uses only low cost, low loss RG-6 for the elements and the feedline of a Reversible Beverage antenna or Reversible Beverage on Ground antenna. Plus, it uses specially designed transformer units that allow the feedpoint unit to be placed anywhere along the length of the Reversible Beverage or BOG, instead of only at one end or the other. Like for other Beverage antennas, the Elevated Beverage or a Beverage on Ground (BOG), the performance of the reversible BevFlex-4X system depends upon the length of the user supplied RG-6 coax for the antenna element. Also, the versatile BevFlex-4X components may be used to create a two-direction version of any one of these antennas, using a much shorter length of wire for the receiving element: * EWE * Flag * VE3DO Loop BevFlex-4X Systems consist of four components; one Feed Unit, two Terminator Units and one Control Switch Unit. The Feed and Terminal Units are house in NEMA rated enclosures and use stainless steel hardware for maximum weather protection. Do you need enhanced reception in four directions? The BevFlex-4X/Q combines two sets of Terminator and Feed Units with the RAS-4 remote antenna switch to let you hear better in all four quadrants. The BevFlex-4X antennas can be any mix of Beverage, BOG, Flag, EWE, or VE3DO. The included RAS-4 Remote Antenna Switch only requires a single coax and four wire control cable to the shack. NOTE: An in-shack four direction switch control box is not included. Choose a control console from DX Engineering, EA4TX and others, or build your own. Just add RG-6 coax and ground rods! Click "More Details" and the Brochure link at the Documentation tab to see pdf diagrams of all of these two and four-direction BevFlex receive antenna system connections. Depending upon the real estate you have available, the FAQ chart will help you choose the Unified Microsystems BevFlex-4X or BevFlex-4X/Q configuration that fits your property and your low band reception needs!
( 14 )
$349.99
—
$649.95
Unified Microsystems Beverage Antenna Transformers
Unified Microsystems Beverage Antenna Transformers are now available. UMS transformers are built with stainless steel hardware and an F-Type coaxial connector. These transformers are fully enclosed for ultimate protection from the elements. They are corrosion resistant and sealed for many years of trouble-free use. Unified Microsystems Beverage transformers should be used with 75 ohm cable, typically RG-6, 6UF, F-6, or equivalent. H. H. Beverage described his "Wave Antenna" (the first Beverage) in the November, 1922 QST Magazine. Beverages are classic designs with well-defined characteristics and time-proven performance. Beverage antennas are among the simplest of high signal-to-noise-ratio antennas to construct. Make Unified Microsystems Beverage Antenna Transformers part of your receive-antenna system. Get yours from DX Engineering today!
( 9 )
$37.95
Unified Microsystems RAS-4 Receive Antenna Switch
Unified Microsystems RAS-4 Receive Antenna Switch is an outdoor capable remote relay unit that allows the operator to select up to four antennas. Receive only antennas are critical for success on the low bands. Due to the wavelengths of the low bands, these antennas cannot be rotated. Several very effective receive only antennas are mono-directional or bi-directional, including Beverage, Reversible Beverage, Beverage on the Ground (BOG), Reversible Beverage on the Ground (RBOG) and many others,. Therefore, a high quality, low noise four port receive antenna switch is required to cover all of the directions with multiple antennas. Common mode noise pick up can ruin the performance of receive antenna systems, so the RAS-4 isolates both the center conductor and shield of unselected ports. An internal bifilar ferrite choke further reduces common mode currents. This unit features female F connectors for RG6U coax with male F connectors, the standard field-serviceable coaxial cable assemblies for receive antenna systems. A very important requirement for dual feedline Reversible Beverage and RBOG antennas is provided by the RAS-4. By default, unselected ports are terminated for 75 ohms. The user can change to 50 ohm, open circuit, or center conductor-shield short by soldering wire jumpers. The RAS-4 is housed in a NEMA rated enclosure with a gasket lid. A cable gland seals the control cable entry. The internal circuit board has a conformal coating for additional protection. The RAS-4 can be mounted outdoors, with the enclosure flanges or with the included L bracket for mounting to a pole or post. The RAS-4 Receive Antenna Switch is a receive-only relay unit that cannot be used for transmitting antennas. The required in-shack control console switch is not included. The RAS-4 will work with a commercial or a simple home brewed, positive 12V One-of-Four switch. Choose from DX Engineering, EA4TX and others for manual or automated switching. Unified Microsystems RAS-4 Receive Antenna Switch Specifications Antenna Selection: 4 receive antennas to 1 main feedline Dimensions: Approx. 4.5 x 3.5 x 3.25 in. (11.4 x 8.9 x 8.3 cm), not including the bracket. Connector type: F (5 total) Unselected port termination: 75 ohm default; 50 ohm; open; shorted. Wire jumper selectable VSWR: < 1.5:1 from 100 kHz to 20 MHz Insertion loss: < 0.4dB from 100 kHz to 20 MHz Port to Port Isolation: > 45dB from 100 kHz to 20 MHz Control Cable: 3 wire plus ground (4 total conductors), Not included Switch Controller: 12 to 14 Vdc, Not included
( 2 )
$124.95
Unified Microsystems Band Decoder/Antenna Selector Modules
Unified Microsystems Band Decoder/Antenna Selector Modules are important components if you are building your own automatic antenna switching system. These modules include the switching logic and relay drivers to easily interface between your Elecraft K3, Yaesu radio or computer, and the antenna switches. Use the BCD-14 to decode band switching for up to 14 relays. The BCD-14 modules decode the band select signals from your radio or computer to automatically select the proper antenna or band pass filter for your chosen band of operation. The module's inputs are optically isolated to provide maximum isolation between your radio or computer and the antenna switching system. Module outputs are grounding-type open-collector relay drivers. If the antenna or filter switch you wish to control requires high-side drivers, add the optional HSD-9 module. One output per band will be active, depending on the input signals. However, outputs may be wired to select a single antenna for multiple bands. For example, one relay may be used to select your tri-bander. With two jumpers installed on the BCD-14, that relay will be activated whenever your radio is set to any one of that antenna's three bands. The BCD-14 covers all bands, 160-10 meters, including the WARC bands plus 6 meters, 2 meters, and 440 MHz. The BCD-14 boards have corner mounting holes, but hardware, enclosures and antenna relays are user supplied. Why risk transmitting on the wrong antenna or put yourself in the position to require manual selection at all? Use this economical Unified Microsystems Band Decoder/Antenna Selector Module from DX Engineering, to build your automated antenna selector system!
( 6 )
$23.99
Unified Microsystems XT-4 MK2 CW Memory Keyers
Unified Microsystems XT-4 MK2 CW Memory Keyers are small, light-weight battery powered CW memory keyers that are perfect for Field Day, POTA, SOTA, DXpeditions, mobile and multi-operator scenarios. The clean design of the XT-4 MK2 will also look great in your shack!
( 6 )
$89.95
Unified Microsystems RXT Terminating Resistors
Complete your receive antenna system with Unified Microsystems RXT Terminating Resistors. These resistors are designed to handle tough environments. Housed in NEMA-class enclosures with stainless steel hardware, their integrated flanges make mounting easy and secure. The 2 watt ceramic resistors are non-inductive, conformal coated, and protected by gas discharge tubes against surge and lightning strikes. Three models are available for different types of receive antennas: 270 ohm, 470 ohm, and 1,000 ohm. Enclosure dimensions: 2.0 in. wide, 3.2 in. deep, 1.4 in tall Many years of inquiries for an enclosure for the Beverage and other receive antenna terminations have been answered! Order Unified Microsystems RXT Terminating Resistors from DX Engineering today!
Not Yet Reviewed
$21.99
Unified Microsystems High-Side Driver Modules
Unified Microsystems High-Side Driver Modules, (HSD-9), are the easy way to adapt a BCD-10, BCD-14, or other low-side band switching decoder to a high-side antenna or filter switch. They provide nine channels of high-side relay control when used with low-side drivers. Antenna switches are always either high-side or low-side switched. There are advantages to each, but it's a pain if your decoder and switch are different types. These HSD-9s are a convenient way to convert the BCD series or other decoders to high-side switching. Simply place an HSD-9 between the BCD-10 and your switch. Specifications: * Nine channels of control when used with BCD-10 selector modules * Board dimensions: 2.4 in. by 1.9 in. * Maximum voltage: 24V DC * Maximum current: 1A Note: Use of an HSD-9 REQUIRES a companion BCD-10 or BCD-14 Band Decoder/Antenna Selector Module or other low-side band-switching decoder. These high-side driver modules are an important component if you are you building your own automatic antenna switching system and employing switches requiring high-side drive. Use one of these Unified Microsystems High-Side Driver Modules, now available from DX Engineering, to convert your relay driver!
( 1 )
$14.99
Unified Microsystems CW Cables
Unified Microsystems CW Cable Sets include cables for the paddle and the transmitter. Their paddle cable has a connector to the VK-64 Voice Keyer on one end, and stripped and tinned wires on the other. Choose their Model KC-4 transmitter cable for termination with a 1/4 in. stereo phone plug for your transceiver key input. Model KC-8 is terminated with a 1/8 in. stereo transceiver-key plug. Their VK-64 voice cable (sold separately) is Model VKC-8. These cables are the perfect match for VK-64 Voice Keyers. Order yours from DX Engineering... and good luck in the contest!
( 6 )
$14.95
Unified Microsystems XT-4Beacon MK 2 CW ID Keyers
Unified Microsystems XT-4Beacon MK 2 CW ID Keyers are a versatile, board-level product that's ideal if you are working on a project that requires a CW IDer or beacon. Setting up your ID message is a breeze. Simply connect your CW paddle, and you're ready to start transmitting and you can easily program a new message whenever you need to.
Not Yet Reviewed
$34.95
Unified Microsystems ML-6 Replacement LED Lamp boards
Unified Microsystems ML-6 Replacement LED Lamp boards use reliable LEDs to replace the hard-to-find incandescent lamp used to illuminate the meter in Hy-gain™ and CDE Ham-M type control boxes. Six white LEDs provide longer life, even illumination and adjustable brightness to achieve the perfect lighting level for your shack. The ML-6 is easy to install. Peel the backing paper off the Velcro™ tape and press the circuit board on the top of the meter, solder the two wires to the old lamp holder, adjust the brightness and you are done!
( 2 )
$12.95
Unified Microsystems SCI-6 PC Sound Card Interface Kits
Unified Microsystems SCI-6 PC Sound Card Interface Kits are an affordable option to get you on PSK31, RTTY, WSJT, EchoLink, and other exciting digital modes by utilizing your PC's internal sound card. These SCI-6 interfaces are your ticket to cutting-edge digital communications developments. Their design incorporates transformer isolation on both transmit and receive audio. The PTT circuit interfaces to a PC serial port through an opto-isolator to generate automatic transmit/receive control. Since the computer PTT-out pulls high, these SCI-6 interfaces require no external power source. These SCI-6 kits also make a great club project! Give your members some kit-building experience, as well as an introduction to new modes. These kits contain a high-quality, double-sided circuit board with a solder mask and component legends for easy assembly. Unlike other low-cost kits, a machined case is included. For convenience, the cables to your PC's sound card are included. You supply the cables to your particular model of radio. RCA phono connectors make it easy for you to customize the remainder of the connections to your radio. Software for many of the digital modes can be downloaded from the Internet at no cost. When using a PC sound card for digital modes, you may inadvertently transmit sounds generated by your operating system. PC-based sounds can usually be eliminated by a settings change. Please see our images for an example of how to eliminate PC sounds. SCI-6 features: * TX audio: transformer isolation * RX audio: transformer isolation * PTT: optical isolation * Power requirements: None * Size: 2.5 in. wide, by 2.5 in. deep, by 1.0 in. high Note: For additional product information, please look at the files under the "Documentation" tab. Order one of these Unified Microsystems SCI-6 PC Sound Card Interface Kits from DX Engineering and get on the air NOW!
( 8 )
$29.95