Availability
VE2DX Electronics Parts and Accessories
VE2DX Electronics IM1-4BTPLUS V2 Icom Digital Meter and TrueCIV Interface
VE2DX Electronics IM1-4BTPLUS V2 Icom Digital Meter and TrueCIV Interface is high-quality 2-Inch Meter Display and TrueCIV version 2 Data Hub for most Icom transceivers. This unique mini-screen device can show two bar graph meters or two needle meter displays, as selected with two front panel buttons, as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design Inc. ICOM METERS ESP32 device ingeniously samples Icom transceiver CI-V data to display available information in multiple formats, depending upon radio model. This IM1-4BTPLUS V2 meter includes a CT17B-MICRO v2 internal 3 port hub with VE2DX Electronics Design Inc. TrueCIV, a new CI-V TTL standard that is unparalleled for RFI resistance. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream via this internal 3-port hub. It supports a many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. This device is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its three TrueCIV ports and single USB port. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of these methods to connect: CI-V via Standard CI-V 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP and is powered via the USB C port. Another important feature of the VE2DX Electronics Design is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the VE2DX Electronics ICOM METERS IM1-4BTPLUS V2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees up the main display of the 7300, 9700 and 705 for bandscope operations.
( 7 )
$174.99
VE2DX Electronics SO2R 2X6 Remote Antenna Switches
VE2DX Electronics SO2R 2X6 Remote Antenna Switches provide selection of any six antennas for connection to two radios, covering the frequency range of 1.8 to 60 MHz. All control signals are RFI filtered as are all VE2DX Electronics printed circuit boards (PCB) with shielding on both sides. Each SO-239 (UHF female) antenna port features five relays to achieve a design with over 80db port isolation and full legal limit power handling. The simplicity of this 2X6 design allows the use of only 2 coax cables from the station to the tower. Both radio ports have access to any of the unselected 6 antenna ports. The VE2DX Electronics SO2R 2X6 Remote Antenna Switches is available in both 12VDC and 24VDC versions; the 24VDC version is for installation that requires a longer control line to the Remote Antenna Switch . Each provides a terminal for a 12VDC line inside the weatherproof unit for remote accessories. VE2DX Electronics SO2R 2X6 Remote Antenna Switches may be controlled by third party switch consoles, station controllers and computer automation that supports two sets of 1 of 6 selection. A weatherproof chassis protects the electronics; units should be installed outdoors with connectors facing downward.
Not Yet Reviewed
$624.99
VE2DX Electronics CT17B-6USB V2 USB Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-6USB V2 USB Icom Interface 5-Port TrueCIV Data Hub connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The USB-C data port of the CT17B-7DM V2 is also protected by the same principles as TrueCIV, called TrueTTL, for stable clean communications to the computer and successful integration of devices with applications. This interface delivers perfect CI-V and USB data for many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. Additionally, the CT17B-6USB V2 interfaces to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
Not Yet Reviewed
$113.99
VE2DX Electronics CT17B-7DM V2 Bluetooth and USB Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-7DM V2 Bluetooth and USB Icom Interface 5-Port TrueCIV Data Hub features a USB CI-V computer interface, CI-V over Bluetooth and a 5-Port Icom TrueCIV version 2 hub that connects the transceiver's CI-V data stream to a computer and multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The USB-C data port of the CT17B-7DM V2 is also protected by the same principles as TrueCIV, called TrueTTL, for stable clean communications to the computer and successful integration of devices with applications. It delivers perfect CI-V and USB TTL data for many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-7DM V2 Bluetooth Interface is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports and single USB port. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Along with the USB CI-V computer interface, the CT17B-7DM V2 interfaces to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
Not Yet Reviewed
$146.99
VE2DX Electronics IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface
VE2DX Electronics IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface is a small electronic device with Bluetooth, USB and CI-V ports to interface an Icom transceiver as well as connect any size HDMI flat panel monitor or TV. This unique Icom radio HDMI Meter Display unit can be configured to show two bar graph or two needle meters as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design Inc. ESP32 device ingeniously samples the Icom transceiver CI-V data to display available meter and status information in multiple formats, depending upon radio model. This exciting device also includes a custom VE2DX Electronics CT17B-Nano version 2 internal 2 port hub with TrueCIV, which creates a new CI-V TTL standard that is unparalleled for RFI resistance. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream supporting many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of three methods to connect: CI-V via standard 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP. This unit provides an electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its two TrueCIV ports and single USB port. Another important feature of the VE2DX Electronics Design ICOM HDMI METER IM1-HDMIV2 is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the IM1-HDMIV2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees the main display of the 7300, 9700 and 705 for bandscope operations
( 1 )
$146.99
VE2DX Electronics CT17B-5 Icom 5-Port CI-V Data Hub
VE2DX Electronics CT17B-5 Icom 5-Port CI-V Data Hub connects the Icom transceiver to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. It supports a many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-5 interfaces to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics CI-V Data Hubs make it easy to interface multiple devices to your Icom radio.
( 1 )
$75.99
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub features CI-V over Bluetooth and a 5-Port hub that connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. It delivers perfect CI-V data to many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-6BT V2 Bluetooth Interface Data Hub is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Additionally, the CT17B-6BT V2 can interface to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
( 1 )
$124.99
VE2DX Electronics LED On Air Acrylic Signs
VE2DX Electronics LED "On Air" Acrylic Signs enhance the look and feel of your shack and will let everyone know when you are operating. When powered, these signs display the "On Air" text in RED. They remain transparent when not illuminated. These signs operate on a user supplied 12VDC power source. Additionally, you can enable automatic activation and turn on the sign during TX by integrating a dry contact relay controlled by your transceiver (not included).
Not Yet Reviewed
$42.99
VE2DX Electronics CT17B-5 V2 5-Port Icom Interface TrueCIV Data Hub
VE2DX Electronics CT17B-5 V2 5-Port Icom Interface TrueCIV Data Hub connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The CT17B-5 V2 delivers perfect CI-V data to many types of tuners, band pass filters and more. From the legacy IC-735 to the newer IC-7300 and IC-9700, this hub interfaces all ICOM CI-V 3.5mm Remote port radios to all types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, all using simple 3.5mm patch cables. Powered via a USB C port, VE2DX Electronics Data Hubs make it easy to interface multiple devices to your Icom radio.
( 1 )
$94.99
VE2DX Electronics Bluetooth Transceiver CAT Interfaces
VE2DX Electronics Bluetooth Transceiver CAT Interfaces are ultra-small, simple devices that allow specific transceivers to communicate with virtually any computer, laptop, tablet, or even smart phone via Bluetooth. Bluetooth CAT Interfaces feature low cost, ultra small design, 3D-designed enclosure and are powered by the radio. YK1-BT supports Yaesu with RS232c DB9-Male CAT including FT-450D, FT-950, FT-991A, FT-2000/D, FTDX-1200, FTDX-3000, FTDX-5000, FTDX-9000, FTDX-10 and the FTDX-101 series, and many later Kenwood transceivers including TS-480SAT/HX, TS-590SG, TS-890S and TS-990S, and more. This RS-232c to Bluetooth interface will work on any radio or external device with RS232c interfacing. YC2-BT includes TrueCAT technology for Yaesu transceivers with 8-pin mini-DIN CAT capability including FT-100/D, FT-817/ND FT-818/ND, FT-818, FT-857, FT-897 and FT-710 AESS/FIELD.
Not Yet Reviewed
$86.99
VE2DX Electronics Accessory Port Breakout Boxes
VE2DX Electronics Accessory Port Breakout Boxes offer a simple, straightforward way to connect your transceiver to other devices with easy-to-use pinout breakout boxes. One for ICOM 8-pin DIN or 13-pin DIN and another for Kenwood 13-pin DIN Accessory port radios, offering remarkably simple access to the signals available via eight 3.5mm mono connectors. DIN plug pins are extremely close together and particularly challenging to solder. Your radio can be internally damaged if you make an incorrect or shorted pin connection. Use VE2DX Electronics Accessory Port Breakout Boxes to reduce the chances of error and to simplify the connections. Connect your devices with confidence as all signals and grounds on the VE2DX Electronics Accessory Port Breakout Boxes are RFI-Filtered and PCBs are fully shielded on both sides. All required DIN and 3.5mm connecting cable assemblies are sold separately, so you can order only what you need.
( 1 )
$144.99
VE2DX Electronics Filtered DIN Cable Assemblies
VE2DX Electronics Filtered DIN Cable Assemblies are 18 inches long for easy connection of an accessory or a VE2DX Breakout Box. Each cable is professionally constructed with high quality connectors and provides RF filtering to support the VE2DX Electronics TrueTTL standard.
( 1 )
$45.99
VE2DX Electronics CT17B-7XDM V2 Bluetooth and USB Icom/Xiegu 5-Port TrueCIV Data Hubs
VE2DX Electronics CT17B-7XDM V2 Bluetooth and USB Icom/Xiegu 5-Port TrueCIV Data Hubs feature a USB CI-V computer interface, CI-V over Bluetooth and a 5-Port Icom/Xiegu TrueCIV version 2 hub that connects the transceiver's CI-V data stream to a computer and multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The USB-C data port of the CT17B-7XDM V2 is also protected by the same principles as TrueCIV, called TrueTTL, for stable clean communications to the computer and successful integration of devices with applications. It delivers perfect CI-V and USB TTL data for many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-7XDM V2 Bluetooth Interface is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports and single USB port. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Along with the USB CI-V computer interface, the CT17B-7XDM V2 interfaces to all Icom CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom/Xiegu Data Hubs make it easy to interface your computer and other devices to your Icom or Xiegu transceiver.
Not Yet Reviewed
$164.99
VE2DX Electronics CI-V/CAT Radio Interface Cables
VE2DX Electronics CI-V/CAT Radio Interface Cables are designed to make connecting the VE2DX CI-V Transceiver Interface Data Hubs with various accessories and transceivers easy. These quality RFI filtered cables are available in multiple lengths and connector configurations.
Not Yet Reviewed
$28.99
VE2DX Electronics CT17B-6XUSB V2 USB Icom/Xiegu 5-Port TrueCI-V Data Hubs
VE2DX Electronics CT17B-6XUSB V2 USB Xiegu/Icom 5-Port TrueCI-V Data Hubs connect Xiegu and Icom transceivers to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. Designed with TrueTTL/TrueCI-V technology, which is a combination of advanced RFI filtering on all ports, signals, power sources and grounds, with an auto-leveling design that ensures the output signals on all five ports remain at maximum TTL levels. These five-port CI-V hubs feature USB-C Data and power, CI-V status LEDs, and magnets under the enclosure to aid with installation. They will support many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-6XUSB interfaces to all Xiegu HF transceivers, which utilize the Icom CI-V protocol, with a 3.5mm mono audio jack (X5105), 3.5mm TRSS multifunction jack (X6100), or a MiniDin connector for the G90 and G106. These CT17B-6XUSB CI-V hubs will also work with Icom remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics TrueCI-V Data Hubs make it easy to interface multiple devices to your Xiegu and Icom transceivers.
Not Yet Reviewed
$125.99
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface is high-quality portable 2-Inch Meter Display and TrueCIV version 2 Data Hub for most Icom transceivers. This unique waterproof mini-screen device can show two bar graph meters or two needle meter displays, as selected with two front panel buttons, as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design ICOM METER ESP32 device ingeniously samples Icom transceiver CI-V data to display available information in multiple formats, depending upon radio model. This exciting device also includes a custom VE2DX Electronics Design CT17-NANO v2 internal 2 port hub with TrueCIV, a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream via this internal 2-port hub. It supports a many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. This is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its two TrueCIV ports and single USB port. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of these methods to connect: CI-V via Standard CI-V 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP. Another important feature of the VE2DX Electronics IM1-4BTTUFFV2 is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the IM1-4BTTUFFV2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees up the main display of the 7300, 9700 and 705 for bandscope operations.
( 1 )
$212.99
VE2DX Electronics Filtered USB Cables
VE2DX Electronics Filtered USB Cables are available with various connectors, each with RF filtering for error free data transfer. High quality connectors and cables let your devicerun, charge and work better.
Not Yet Reviewed
$40.99
VE2DX Electronics CT17B-5X V2 Icom/Xiegu 5-Port TrueCI-V Data Hubs
VE2DX Electronics CT17B-5X V2 Icom/Xiegu 5-Port TrueCI-V Data Hubs connect Xiegu and Icom transceivers to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. Designed with TrueTTL/TrueCI-V technology, which is a combination of advanced RFI filtering on all ports, signals, power sources and grounds, with an auto-leveling design that ensures the output signals on all five ports remain at MAXIMUM TTL levels. These five-port CI-V hubs feature USB-C power, CI-V status LEDs, and magnets under the enclosure to aid with installation. They will support many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-5X V2 interfaces to all Xiegu HF transceivers, which utilize the Icom CI-V protocol, with a 3.5mm mono audio jack (X5105), 3.5mm TRSS multifunction jack (X6100), or a MiniDin connector for the G90 and G106. These CT17B-5X V2 CI-V hubs will also work with Icom remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics TrueCI-V Data Hubs make it easy to interface multiple devices to your Xiegu and Icom transceivers.
Not Yet Reviewed
$109.99
Clearance
Open Box
VE2DX Electronics DVI to HDMI Video Converter and Monitor Combination
The VE2DX Electronics DVI to HDMI Video Converter and Monitor Combination provide a DVI-D to HDMI converter cable and a safe 15 in. HDMI Monitor Screen. This combination kit also includes RFI filtered cables and a power supply. This is a large display for any transceiver that has a monitor DVI-D output. Using this HDMI input screen makes this DVI-D to HDMI converter completely safe to use with your Yaesu, Icom, Kenwood or other transceiver that provides a display screen DVI-D output. Some aftermarket converters allow over 5 VDC from the monitor to blow the 150mA internal protection fuse on some Yaesu radio's main board to blow, which requires service by Yaesu. This VE2DX Electronics DVI-to HDMI Video Converter and Monitor Combination prevents that problem. Enjoy a larger transceiver display screen, worry-free!
Not Yet Reviewed
$258.99
$246.04
VE2DX Electronics Accessory Port Adapters
VE2DX Electronics Accessory Port Adapters essentially split or combine Icom 13-pin DIN to 8-pin DIN and 7-pin DIN to allow use of multiple accessories. Adapters either attach directly onto the back of the radio and/or connect with VE2DX Filtered DIN Cable Assemblies, sold separately.
Not Yet Reviewed
$57.99
VE2DX Electronics Band Decoders
VE2DX Electronics Band Decoders, available here in limited final production quantities, with three versions. They can be set up to control remote relay antenna switches and band pass filters by interfacing to a wide range of transceivers via direct connection, Bluetooth, USBoIP via WiFi and/or direct WiFi/LAN connections, when available. They interface to transceivers to decode up to twelve user defined frequency bands for the control of either eight or sixteen outputs and may be updated for band changes or new band arrival. VEX-BD1-BT Band Decoders interface with one radio and provide one set of eight outputs to automatically control a single remote multiport antenna switch OR a band pass filter (BPF). VEXD1-BTPlus Band Decoders interface a single radio to two sets of eight outputs to automatically control a remote antenna switch AND a Band Pass Filter. IBD2-BT Band Decoder is the top-of-the-line unit that can interface with a dual receiver transceiver and offers two sets of eight outputs to either automatically control two remote antenna switches, or two Band Pass Filters, or one of each. VE2DX Electronics Band Decoders are powered via a USB-C port to a Windows PC. Internal jumpers are user set to control output functions and configure support transceivers from FlexRadio, ICOM, Kenwood and Yaesu. Included with each VE2DX Electronics Band Decoders all of the following advanced features: • VE2DX TrueTTL • VE2DX TrueCAT • VE2DX TrueCIV • VE2DX Blind Operator Assistance (BOA) • VE2DX Software Defined Interlock (SDI) • RFI filtration • Heavy shielding • Signal processing • Automatic signal leveling • External Voltage Switching • CAT/CIV support • Automatic RS232c/TTL support • Wi-Fi • USB-C • Internal/External Voltage Switching • GND Switching • Status/Error messages in CW or Decimal • Mismatched Radio manufacturers • Mismatched remote switches • Mismatched band/output configurations • Blocked outputs on error • Twelve band frequency definitions per output sets • Eight output sets with support of multiple band definitions • Automatic SWR detection with assigned output VE2DX Band Decoders come with multiple LEDs for fast status checks of the Band Decoder: • Power (RED) • DATA (Cat/CIV, RED) • Automatic (RED) • Selected Radio (Green) • Error (RED) • Outputs (Yellow) • SDI - Software Defined Interlock - (RED on the IBD2-BT only)
Not Yet Reviewed
$259.99
—
$475.99
VE2DX Electronics ICOM HDMI Interface & Screen Combo
Upgrade Your Shack with the VE2DX ICOM HDMI Interface & Screen Combo! Limited quantities! Enjoy a crystal-clear 15-inch HDMI monitor and the powerful IM1-HDMI V2 Digital Meter Display with TrueCIV Data Interface. This compact, ESP32-based device connects seamlessly to over 20 Icom radios via CI-V cable, Bluetooth, or USBoIP, giving you flexible options for any setup. Free your main radio display for band scope operations while monitoring critical metrics on a dedicated screen with customizable bar or needle meters. Engineered for performance, the IM1-HDMI V2 features Bluetooth, USB, and CI-V ports, including an internal CT17B-Nano V2 hub with TrueCIV for unmatched RFI resistance. It supports multiple accessories like band decoders, antenna controllers, amplifiers, tuners, and filters—all powered with a simple USB-C connection or supply. Perfect for IC-705 users, it solves the missing CI-V port issue with Bluetooth pairing. Added perks? A programmable SWR alarm for peace of mind and integrated magnets for quick, hassle-free installation. Note: This is not a transceiver screen adapter and does not display a band scope—it's a dedicated meter display designed to optimize your operating experience. VE2DX Electronics ICOM HDMI Interface and Screen Combos include: • 15 in. HDMI Monitor Screen with power supply. • IM1-HDMI V2 Icom Digital Meter HDMI Display and TrueCIV Data Interface • RFI filtered cables
Not Yet Reviewed
$329.99
VE2DX Electronics CT17B-6XBT V2 Bluetooth Icom/Xiegu 5-Port TrueCI-V Data Hubs
VE2DX Electronics CT17B-6XBT V2 Bluetooth Icom/Xiegu 5-Port TrueCI-V Data Hubs feature CI-V over Bluetooth and a 5-Port hub that connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. TrueCIV, designed by VE2DX Electronics Design Inc., creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. It delivers perfect CI-V data to many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-6XBT V2 is also the perfect electronic remedy for the missing physical CI-V port on the Icom IC-705. This Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Additionally, the CT17B-6XBT V2 can interface to all ICOM CI-V 3.5mm Remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Xiegu or Icom transceiver.
Not Yet Reviewed
$138.99
VE2DX Electronics CT17B-5X Icom/Xiegu 5-Port CI-V Data Hubs
VE2DX Electronics CT17B-5X Icom/Xiegu/ 5-Port CI-V Data Hubs connect Xiegu and Icom transceivers to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. These five-port CI-V hubs feature CI-V status LEDs and magnets under the enclosure to aid with installation. They will support many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-5X interfaces to all Xiegu HF transceivers, which utilize the Icom CI-V protocol, with a 3.5mm mono audio jack (X5105), 3.5mm TRSS multifunction jack (X6100), or a MiniDin connector for the G90 and G106. These CT17B-5X CI-V hubs will also work with Icom remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics CI-V Data Hubs make it easy to interface multiple devices to your Xiegu and Icom transceivers.
Not Yet Reviewed
$79.99