Availability
West Mountain Radio DC Power
West Mountain Radio Epic PWRgate Battery Backup Systems
West Mountain Radio's Epic PWRgate Battery Backup Systems are their 3rd generation power gate product. Featuring advanced technology, they achieve a very low power loss with maximum flexibility to charge modern batteries. Product details: * Epic PWRgate is a 12 volt backup power system rated at 40 amperes continuous from either a power supply or a battery. * Connected equipment will instantly switch to battery during a power blackout or power supply failure. * Low loss PWRgate provides forward voltage drop of only 0.05 volts. * USB port access to monitor system or to change charge parameters. * Program for specific battery types. * Supports smart charging of either Lead Acid or Li-Ion battery charging up to 10A. * Direct solar panel input for battery charging (all chemistries). Third-party solar panel VOC must be <= 30V. * Can be programmed for vehicle use to suspend charging when the alternator is off. * Complete LED status indicators. * Battery charge suspend button to eliminate current draw or charger noise for 30 minutes. * Optional temperature probe to control charging based on battery temperature. * Solid, durable construction in an aluminum case. Includes mounting holes for convenient and secure use in mobile units. * Uses Anderson Powerpole connectors. Maximum Voltage: Power Supply 16 Vdc / Solar 30 Vdc Maximum Current: 40 Amperes Maximum Charge Current: 10A Voltage Drop: 0.05 Vdc Connectors: Anderson Powerpole, 45A Size: 4.5 x 3.375 x 1.25 in Weight: 0.35 lbs. Mounting Holes: Four - 0.175 d, #8 hardware Isolate and smart charge your battery all while using your electronics without worry. Add West Mountain Radio Epic PWRgate Battery Backup Systems to your equipment.
( 26 )
$189.95
West Mountain Radio RIGrunner DC Outlet Panels
Get rid of that power-supply rat's nest with West Mountain Radio RIGrunner DC Outlet Panels! You'll enjoy having a RIGrunner, with its durable, standardized Anderson Powerpole connections. Properly organized DC distribution will make a long-overdue improvement to the convenience and safety of your Amateur Radio station. Think of a RIGrunner as the 12 volt equivalent of an AC power panel in your home. Their quick-disconnect feature makes them truly convenient! RIGrunners are available with four to 12 outlets. Fused input currents are 40 or 80-amps, depending on the model. All are capable of handling up to 40 amps of total output current! Each RIGrunner DC outlet is individually fused for ultimate protection! Some RIGrunners also provide advanced features, such as automatic power-on detection, USB charging ports, DC-power monitoring indicators, programmable automatic trip points, and Internet reporting and control. You say you need 24 or 48 volt DC power distribution? No problem! RIGrunners are available to provide those voltages ... and even 48 volt NEGATIVE polarity! Note: For additional product information, please look at the files under the "Documentation" tab. Eliminate the DC power distribution problems in your operation BEFORE they happen! Order your West Mountain Radio RIGrunner DC Outlet Panels from DX Engineering...today!
( 100 )
$104.95
—
$199.95
West Mountain Radio Super PWRgate Battery Backup Systems
West Mountain Radio Super PWRgate Battery Backup Systems are built to handle the job, with two 80 ampere Schottky diodes configured as an OR-Gate, they isolate and switch your equipment between power supply and battery operation. Capable of safely handling a continuous 40 amperes on almost any 12 Vdc power supply and battery combination, they make a true solid-state UPS (uninterruptible power supply). With a built-in four-stage, high-power, current limit selectable smart battery charger, Super PWRgate Battery Backup Systems are ideal for the ham shack, emergency communications systems (EmComm), or anywhere DC power is crucial. Connected equipment instantly and automatically switches to battery power during an AC power blackout or power supply failure. Super PWRgate units eliminate the danger of connecting a power supply directly across a battery, which can damage many power supplies. Using your power supply and a PWRgate also avoids introducing hum and RF interference that is caused by most lead-acid battery chargers. Furthermore, most lead-acid battery chargers are designed for flooded lead-acid marine or automotive batteries, and are inappropriate for charging sealed lead-acid gel cells and AGM type batteries. Featuring selectable current rates of 1, 4, 7 or 10 amperes to match your battery's rating, these units can extend the life span of these types of batteries compared to using a standard car battery charger. Super PWRgate units are very useful in the ham shack, and even more useful in a repeater installation. Communication equipment will remain operative during AC power blackouts and power supply failures. Power supplies and batteries can be swapped out while equipment continues to be powered and without glitches. Additionally, with a power supply a PWRgate may be used solely as a permanently installed battery charger or configured to run a radio station directly from the battery. Note: For additional product information, please look at the files under the "Documentation" tab. West Mountain Radio Super PWRgate Battery Backup Systems are always ready for your DC powered equipment. Get yours here…at DX Engineering!
( 14 )
$139.95
—
$165.95
West Mountain Radio PWRguard Plus DC Protectors
West Mountain Radio PWRguard Plus DC Protectors are solid-state series switches that automatically detect and disconnect when a DC power system fault occurs, including over-voltage, under-voltage and short circuit conditions. Designed specifically to protect your radio, power supply and battery backup from damage, PWRguard Plus instantly turns off if the DC line exceeds 15 volts or drops below 11 volts for more than 3 seconds, and automatically or manually reset when the line returns to 13 volts or above. Momentary voltage dips below 11 volts are ignored to prevent false tripping while transmitting. PWRguard Plus DC Protectors have Powerpole connectors for input and output and handle 30 amperes continuous duty and 40 amp peaks and feature a soft turn-on solid-state circuit with no relay contact bounce, to protect equipment from in-rush current and spikes. LEDs indicate system conditions and a mutable piezo buzzer sounds every minute when PWRguard Plus turns the DC power off due to a system problem. In addition to protecting your equipment, battery and power supply from self-inflicted trouble, PWRguard Plus DC Protectors also have a sense input connection inside that can be wired to a switch, contact closure or can be triggered by a 3 to 5 volt DC. This means, PWRguard Plus can also be controlled with a Key Locking Switch to prevent radio operation during down time, system or antenna repairs, cut power based on input from a water or a heat sensor, or turn power on or off with a photo-electric circuit or other low current sensor switch; only your imagination can limit the useful applications for the PWRguard Plus! Note: For additional product information, please look at the files under the "Documentation" tab. Ideal for radio communications systems that rely on DC power, West Mountain Radio PWRguard Plus DC Protectors are a very useful addition to almost any 12 Volt DC powered system. Order one for your special application today!
( 1 )
$114.95
West Mountain Radio ISOpwr+ Auxiliary Battery Isolators
West Mountain Radio ISOpwr+ Auxiliary Battery Isolators protect the primary battery while supplying power to the "spare" battery and equipment. With an ISOpwr+ isolator, the vehicle battery will never be drained by leaving the equipment turned on, so the vehicle will always start! ISOpwr+ Isolators are automatic solid-state ON-OFF switches, without relays, that charge an auxiliary battery and run mobile radio equipment, powered by the vehicle alternator when the car is running. The ISOpwr+ turns ON when the car is running and the line is over 13.3 volts. The ISOpwr+ turns OFF when the alternator is not running and the vehicle battery has fallen below 12.6 volts, but equipment will continue to run from the auxiliary battery. ISOpwr+ Auxiliary Battery Isolators work safely with all types of batteries including 12-volt standard Lead-Acid, Flooded Lead Acid, Gelled and AGM. They are ideal for use in all vehicles utilizing an auxiliary battery, for many diverse purposes: Radio Command mobile set ups for ARES, RACES, FEMA; contest VHF/UHF rovers; medium powered Amateur Radio equipment; re-charging stations for electric model airplanes, boats and cars; DC powered TVs or stereos in RVs and campers, and so much more! ISOpwr+ isolators may be used without an auxiliary battery, as a power interrupt, to automatically turn on a transceiver or other device only when the car is running. In this battery saving application, the radio will turn off automatically after a short delay when the vehicle ignition is turned off, so you won't have to remember to turn off the transceiver. ISOpwr+ features a USB port for setting operating thresholds and for monitoring and has a smaller and lighter weight enclosure. West Mountain Radio ISOpwr+ Auxiliary Battery Isolator Specifications: Operating Voltage: 20 V maximum Quiescent Current: Less than 5 mA Maximum Current: 40 A Voltage Drop: 0.25 V at 1A, diode drop Series Resistance: 0.01 ohms maximum Switch Time-Constant: 5 seconds Turn ON Threshold: 13.3 Vdc (+/- 0.1 V) Turn OFF Threshold: 12.6 Vdc (+/- 0.1 V) Green LED: Indicates the ISOpwr+ output is ON Size: 4.50 x 3.40 x 1.40 in, 11.4 x 8.6 x 3.5 cm Weight: 0.9 lbs., 0.4 kg Connectors: Powerpoles Enclosure: Heatsink, black anodized aluminum, painted aluminum cover Note: For additional product information, please look at the files under the "Documentation" tab.
Not Yet Reviewed
$119.95
West Mountain Radio DC-to-Go Portable Power Systems
West Mountain Radio DC-to-Go Portable Power Systems are ready to use DC power distribution panels and battery box combinations that are ready for two different size batteries and feature a mounted power distribution panels. These portable power systems are great for emergency GO KITS, casual portable radio operations, special event stations or contesting excursions, or to bring along on DXpeditions or activation destinations. Portable power always comes in handy for camping trips, remote construction and repair jobs, and anywhere DC Power is needed. Choose an optional battery that is right for your purposes. Add an optional Power Inverter for AC devices. Use your DC-To-Go Portable Power System as a battery backup for your base station! Open new horizons with West Mountain Radio DC-To-Go Portable Power Systems and accessories from DX Engineering.com - your new powerhouse of electronic savings.
( 4 )
$139.95