Availability
West Mountain Radio Parts and Accessories
West Mountain Radio N8XJK Super Booster
West Mountain Radio has collaborated with N8XJK to bring back the popular TG Electronics Booster! This unit will help you get the most life out of your battery. This model is an improvement on a design that has been widely used in Amateur radio for more than 15 years. The N8XJK Super Booster was specially designed for use with a radio. When the voltage from a battery drops, the Super Booster brings it up to a level that allows for optimal transmit. The output level can be set by a trimmer pot to any value up to 15V. The advantage of using the Super Booster is to compensate for the fact that lead acid battery is rated in Amp-Hours for use down to 10.5V. However, radios require at least 11.7V to transmit. The Super Booster lets you use the extra one-third of amp-hours in the battery that wouldn't otherwise be available. For example, when doing 100W SSB with a 74AH battery (car size) allows for 10 hours continuous transmit. When using the Super Booster, the result is at least 15 hours of continuous transmit. Even at the last amp-hour of the battery's life, there is 10.5V and at least 11.7V to the radio. Transmitters tend to be more efficient at higher voltages, therefore there is additional savings by using, for example, 14.5V. The Booster Remote control/monitor unit, sold separately, is a compact remote head that monitors input/output voltage, as well as error conditions like over-voltage and overheating. Super Booster readily accommodates the remote control or to connect units in parallel to achieve 80A or 120A. Capabilities of the West Mountain Radio N8XJK Super Booster: - High Power - Draws up to 40A from the battery - Connect units in parallel for 80A and 120A - Quiet, Thermally Controlled Fan - Allows for operation at max current continuously - Adjustable RF Enable Delay - When RF input is used provides smooth transmissions - Low voltage shut-off with LED indicator - Extremely low RFI - Switch for Boost, No Boost, or Auto when RF detected
( 7 )
$324.95
West Mountain Radio RIGrunner DC Outlet Panels
Get rid of that power-supply rat's nest with West Mountain Radio RIGrunner DC Outlet Panels! You'll enjoy having a RIGrunner, with its durable, standardized Anderson Powerpole connections. Properly organized DC distribution will make a long-overdue improvement to the convenience and safety of your Amateur Radio station. Think of a RIGrunner as the 12 volt equivalent of an AC power panel in your home. Their quick-disconnect feature makes them truly convenient! RIGrunners are available with four to 12 outlets. Fused input currents are 40 or 80-amps, depending on the model. All are capable of handling up to 40 amps of total output current! Each RIGrunner DC outlet is individually fused for ultimate protection! Some RIGrunners also provide advanced features, such as automatic power-on detection, USB charging ports, DC-power monitoring indicators, programmable automatic trip points, and Internet reporting and control. You say you need 24 or 48 volt DC power distribution? No problem! RIGrunners are available to provide those voltages ... and even 48 volt NEGATIVE polarity! Note: For additional product information, please look at the files under the "Documentation" tab. Eliminate the DC power distribution problems in your operation BEFORE they happen! Order your West Mountain Radio RIGrunner DC Outlet Panels from DX Engineering...today!
( 100 )
$349.95
—
$359.96
West Mountain Radio DC-to-Go Portable Power Systems
West Mountain Radio DC-to-Go Portable Power Systems are ready to use DC power distribution panels and battery box combinations that are ready for two different size batteries and feature a mounted power distribution panels. These portable power systems are great for emergency GO KITS, casual portable radio operations, special event stations or contesting excursions, or to bring along on DXpeditions or activation destinations. Portable power always comes in handy for camping trips, remote construction and repair jobs, and anywhere DC Power is needed. Choose an optional battery that is right for your purposes. Add an optional Power Inverter for AC devices. Use your DC-To-Go Portable Power System as a battery backup for your base station! Open new horizons with West Mountain Radio DC-To-Go Portable Power Systems and accessories from DX Engineering.com - your new powerhouse of electronic savings.
( 4 )
$254.95
—
$269.95
West Mountain Radio CLRstereo ClearSpeech® Dual Noise Reduction DSP
West Mountain Radio CLRstereo ClearSpeech® Dual Noise Reduction DSP – an extremely effective tool for improving communication clarity. Dynamic DSP noise reduction adapts to changes in the interference and signal. It passes voice and CW while attenuating atmospheric noise, hum, hiss, whistles, and static. It effectively removes heterodynes, ignition noise, lightning crashes, power line noise. QSO's are more fun without all the background noise. The DSP recognizes the intermittent nature of CW and allows it to pass noise free. CLRstereo features independent "Left" and "Right" channels, each with DSP filter level, Tone and Volume (audio level) controls and a red "CLIP" LED to indicate when that channel input level is too high. Next to the front panel toggle Power switch is a green LED to indicate powered condition. CLRstereo can process two channels simultaneously, for use with two separate radios or with a radio that features two separate receivers, such as Main and SUB. Please note that the CLRstereo does not contain a power amplifier. While the output is sufficient for a headphone or low level speakers, the CLRstereo is intended to be connected to an amplified speaker system. Specification of the CLRstereo ClearSpeech® Dual Noise Reduction Digital Signal Processor: - Enclosure: Metal, powder coat painted - Dimensions (WHD): 7.25 x 1.5 x 3.5 in. - Input: 1/8 in. (3.5 mm) stereo female (TRS) - Output: 1/8 in. (3.5 mm) stereo female (TRS) - Power Input: USB or 2.1 mm, center positive - Power Requirements: USB power or 9 to 15 Vdc, 212 mA typical - Audio Output, max.: 2 V p-p into a high impedance load; 560mVpp into 8 ohm input - Clipping Level: 585 mV p-p (volume control full clockwise) - Noise Reduction: Adaptive, single tone greater than 50 dB
Not Yet Reviewed
$349.95
West Mountain Radio RIGblaster DXpro Digital Mode and Rig Control Interfaces
West Mountain Radio RIGblaster DXpro Digital Mode and Rig Control Interfaces feature dual high-performance sound cards to simultaneously monitor main and sub receivers. You can run digital mode programs on each channel, so they're perfect for SO2V/SO2R. As a combination audio and rig control interface, operating your favorite digital mode program simultaneously with your favorite logging program is easy. The included DXpro application provides on screen configuration of most software options. Seven pre-wired ISC jumper blocks are included to take care of microphone connections to most Icom, Yaesu, Kenwood, Elecraft & Alinco radios. The RIGblaster DXpro lets you record voice keying wave files using your radio's own microphone. Built-in Rig Control features independent fully implemented CAT. Optional inversion to TTL and RS232 outputs and an external pass-through USB jack make for super convenient connection of any type of control to accessories! Here are the rest of the capabilities and features of the RIGblaster DXpro Interfaces: • Fully compatible with RemoteHams/HRD for remote control of your station • Switchable 12V DC output for remotely controlling a small station accessory such as a TNC or 12V relay • Onboard header for optional CLRmod DSP gives you fully adjustable Clearspeech® audio when using the DXpro remotely • Integrated sequencer ports for high power VHF/UHF safety • Hardware squelch input for EchoLink® or other applications • Powered via USB or external 12V (with software switchable 12V output jack) • External pass-through USB jack for convenience • Precision engineered in the USA with extensive RF filtering • Record voice keying wave files using your radio's own microphone. Also allows you to record both sides of your QSO. • Multi-tap footswitch input (or analog keypad) provides up to three trigger signals for contest voice keying • Integrated Fldigi "right-channel" RTTY detector turns AFSK into FSK, even on Mac OS or Linux. A similar feature turns tone Morse code into true keyed CW. • Front panel mounted transmit and receive audio level knobs makes it easy to adjust transmit/receive levels on the fly without having to make changes in software sound levels • Three position switch for PTT selection • Four onboard transformers for complete audio isolation • Mechanical relay for PTT; works with classic or modern rigs. RIGblaster DXpro includes: • RIGblaster DXpro Unit • 1/8 in. (3.5mm) Audio Cables, 6 ft. • (1) 8-pin Screw-on Custom Mic Cable, 3 ft. • RIGblaster 12V DC Cord with Powerpole®, 6 ft. • Instant Setup Connectors • USB cable • DVD with Device Drivers, Owner's Manual & Collection of Ham Radio Sound Card Software • Accessory Kit • (8) White Jumpers • (5) Blue Shunt Jumpers A DVD of the RIGblaster Software Collection is the standard media. Alternately, the collection of software programs, drivers and manual are linked for download at westmountainradio.com
Not Yet Reviewed
$374.95