Availability
West Mountain Radio
Take digital operation to the next level with West Mountain Radio! The company’s popular RIGblaster rig control interface connects your radio to a USB connector so you...
Take digital operation to the next level with West Mountain Radio! The company’s popular RIGblaster rig control interface connects your radio to a USB connector so you can operate over 20 exciting modes on which your radio could not otherwise operate. Plus, the RIGblaster allows you to use over 100 existing and future ham radio sound card software programs. West Mountain Radio also offers DSP noise reduction processors and speakers, which produce clean, clear voice or CW with over 85% of noise removed! The next step in amateur radio digital operation is here at DX Engineering! Shop our full line of West Mountain Radio...
Take digital operation to the next level with West Mountain Radio! The company’s popular RIGblaster rig control interface connects your radio to a USB connector so you can operate over 20 exciting modes on which your radio could not otherwise operate. Plus, the RIGblaster allows you to use over 100 existing and future ham radio sound card software programs. West Mountain Radio also offers DSP noise reduction processors and speakers, which produce clean, clear voice or CW with over 85% of noise removed! The next step in amateur radio digital operation is here at DX Engineering! Shop our full line of West Mountain Radio products today!
West Mountain Radio PWRspkr 15W Amplified Speakers
West Mountain Radio PWRspkr 15W Amplified Speakers are designed specifically for use in noisy environments where standard speakers cannot get enough sound out of a mobile transceiver. You want to be able to hear the mobile radio in any situation. These speakers make the sound loud enough to cover the road and wind noise in any vehicle. If the radio must be heard at a distance while working out of the vehicle, PWRspkr 15W Amplified Speakers will also get that job done. Featuring a 15 watt RMS linear audio amplifier and an active bandpass filter that operates from 300 to 3,200 Hz, PWRspkr 15W Speakers are specifically tailored for enhanced mobile voice communications. PWRspkr 15W Speakers have plenty of gain with a volume control that allows for setting the speaker audio to the appropriate level for any listening situation. Their loudspeakers' sound pressure level (SPL) can typically achieve 102.5 dB at 1 meter before electronic clipping. They require 13.8V DC that is applied through internal RF and DC line filters, and each speaker is supplied with a tilt mounting bracket, a 6 ft. power cable with Powerpole® connectors, a 6 ft. Audio Cable with 3.5mm plugs and an Owner's Manual. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. West Mountain Radio PWRspkr 15W Amplified Speakers are ideal for mobile Amateur Radios, CB radios, commercial two-way radios, emergency radios in ambulances, fire and police vehicles, and for small public address systems. Order yours now from DX Engineering!
( 8 )
$79.95
West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors
West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors are designed to be installed between your radio and your favorite passive external speaker or amplified speaker. Complex DSP algorithms filter all of the noise content of the incoming signal and greatly attenuate or completely remove hum, hiss, vehicle ignition, and power line noise, as well as heterodynes. The result: the ability to hear voice and CW audio clearly, with over 85 percent of the noise removed. These units have a convenient volume-control knob that allows a user to adjust the speaker audio level for comfortable listening. This allows the radio's AF Gain control setting to be optimized for other uses, such as interfacing to a West Mountain Radio RIGblaster sound card interface. Features include: * Amplifier for speaker or headphone with volume control * ClearSpeech® adaptive DSP noise reduction for voice and CW * Recognizes intermittent nature of CW and allows it to pass noise-free * Adjustable noise reduction control * Tone control * 11W watt (into 4 ohms) power amplifier * Sturdy aluminum case--ideal for mobile operation, as well as home station * Powerpoles plug into any 12V supply * Plugs into the speaker or headphone output on the radio * 1/8 in. phone jack on rear can drive external 8 or 4 ohm loudspeaker or amplified computer speakers * On/off switch with green indicator LED * Red LED flashes to indicate digital overload clipping Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. You've heard about DSP and how it helps to get those DX QSOs in the log book. Now experience it first hand with West Mountain Radio CLRdsp ClearSpeech® Noise Reduction Processors from DX Engineering!
( 28 )
$219.95
West Mountain Radio ClearSpeech DSP Noise Reduction Speakers
West Mountain Radio ClearSpeech DSP Noise Reduction Speakers contain West Mountain's ClearSpeech noise reduction circuit and an audio amplifier. They are extremely effective in improving communication clarity, making mobile and base operation less fatiguing and more fun. These speakers may be mounted in any location—they can rest on a tabletop or mount to any surface. Their included mounting bracket has two holes for mounting, and side-located adjustment knobs permit tilt aiming. Features include: * Amplified loudspeaker with ClearSpeech adaptive DSP noise reduction for voice and CW * Recognizes intermittent nature of CW and allows it to pass noise-free * Continuously variable adaptive filter noise reduction, 0 bB to -17 dB * Contains a 4 in. loudspeaker with 10 watt amplifier * Volume control knob for adjustment of internal speaker sound level * Front mounted 1/8 in. stereo output jack for powered speakers or 16 ohm or higher headphones * On/off switch with green indicator LED * LED flashes red to indicate digital overload clipping * Small, lightweight; includes mounting bracket * Powerpole equipped cable plugs into any 12 V supply Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Why not combine DSP with a high-quality communications speaker? Order West Mountain Radio ClearSpeech DSP Noise Reduction Speakers from DX Engineering to hear the difference DSP technology can make!
( 20 )
$219.95
West Mountain Radio COMspkr Computer Speakers
West Mountain Radio COMspkr Computer Speakers have been changed to a different style. They are good speakers for a ham station to replace RF interference-prone computer speakers and have a stereo high-fidelity response that may be used for voice or music. West Mountain Radio COMspkr Computer Speakers' built-in amplifier provides compatibility with most computer and 2-way radios. The attached power cable is connected to a computer USB or USB charger adapter. Audio connection is made with the attached cable with a 3.5mm male stereo plug, best connected to a radio headphone jack. No adapter is supplied for connection to a radio external speaker jack. These lightweight plastic computer speakers replace the previous wood version COMspkrs.
( 6 )
$39.95
West Mountain Radio CBA Battery Discharge Amplifiers
West Mountain Radio CBA Battery Discharge Amplifiers make testing batteries at high discharge rates easier than ever! These amplifiers are very simple in concept: They are a DC amplifier that amplifies and regulates discharge current (load) with a total of 10X amplification-factor as set by the software. The Computerized Battery Analyzer (CBA) is actually doing one-tenth of the discharge work and the amplifier is doing the other nine-tenths. The amplifier simply senses the current drawn by the CBA and amplifies the discharge current setting of the CBA for a total of ten times the set current. CBA Battery Discharge Amplifiers are designed and recommended only for COMMERCIAL OR INDUSTRIAL use. They are not intended for a hobbyist, as they will easily test batteries at destructive limits. It is NOT recommended to test batteries at advertised maximum ratings--maximum discharges may significantly shorten the life-cycle of a battery. CBA Battery Discharge Amplifiers are designed to be left in-line and switched off for discharge rates that are less than 100 watts or less than 10 amps. At these power levels, a CBA alone can handle the discharge current. If your battery analyzer application calls for a high rate of discharge when performing battery testing, then contact DX Engineering today for one of these West Mountain Radio CBA Battery Discharge Amplifiers! Look at these specifications! * Max. continuous discharge rate: 500 W * Discharge rate amplification (typical): 10X +/- 1% * Absolute-maximum operating voltage: 55 V * Max. discharge rate: 160 A (battery dependent) * Min. voltage for 160A discharge: 0.9 V at test completion (battery dependent) * Connectors: Supplied copper bus 5/16 bronze battery connectors; Powerpole CBA connectors * Fan operation: Auto sense, requires 1A or more current from CBA (stays on approx. 5 min. after test completion) Note: For additional product information, please look at the files under the "Documentation" tab. West Mountain Radio CBA Battery Discharge Amplifiers from DX Engineering are the best way to do detailed battery analysis!
Not Yet Reviewed
$799.95
West Mountain Radio PWRcheck+ DC Power Analyzers
West Mountain Radio PWRcheck+ DC Power Analyzers are amazing DC power monitoring devices. A vibrant LCD color touchscreen displays data in digital, analog and bar graph formats. Eight digital display modes and graphical charts show voltage, current flow in either direction, wattage and ampere-hour measurements. This high-side monitor may be used in a mobile or base environment to measure 0 to 60 Volts DC up to 40 Ampere. A USB cable provides computer interface for device configuration and data download for display. Programmable alarms are available for over-current, under and over-voltage and amp-hours making this a versatile battery system monitor. Powerpole® connectors are used for Load and Source. Here are all of the features of the West Mountain Radio PWRcheck+: Hardware • Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours • Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck+), 40A continuous load • Accurate to within +/- 10mV, +/- 10mA • Resolution - 10mV, 10mA • High side in-line monitor; does not require breaking power supply ground or return path, ideal for vehicle use • Vibrant LCD color touchscreen displays data in digital, analog and bar graph formats • Monitor back up battery with programmable gas gauge • Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months of data @ 1 point per minute) without power • USB computer interface for configuration and data download • Programmable alarm conditions for overcurrent, over/under voltage, amp-hours • Uses Powerpole® connectors (see Accessories) • Dimensions (WHD): 4.500 x 3.00 x 0.875 in. * PWRcheck+ requires a minimum 50mA load to measure voltages below 4.5V. Software • Easily program every aspect of PWRcheck+ operation such as data logging rate, display formats, alarm conditions • Displays current, voltage, wattage and amp-hours in real time • Integrated charting software automatically collects and displays data • Downloads stored data for later analysis • Exports to Excel Computer System Requirements Basic Requirements: • At least an 800 X 600 graphics card and display monitor • Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10 • An available USB port
Not Yet Reviewed
$184.95
West Mountain Radio PWRguard Plus DC Protectors
West Mountain Radio PWRguard Plus DC Protectors are solid-state series switches that automatically detect and disconnect when a DC power system fault occurs, including over-voltage, under-voltage and short circuit conditions. Designed specifically to protect your radio, power supply and battery backup from damage, PWRguard Plus instantly turns off if the DC line exceeds 15 volts or drops below 11 volts for more than 3 seconds, and automatically or manually reset when the line returns to 13 volts or above. Momentary voltage dips below 11 volts are ignored to prevent false tripping while transmitting. PWRguard Plus DC Protectors have Powerpole connectors for input and output and handle 30 amperes continuous duty and 40 amp peaks and feature a soft turn-on solid-state circuit with no relay contact bounce, to protect equipment from in-rush current and spikes. LEDs indicate system conditions and a mutable piezo buzzer sounds every minute when PWRguard Plus turns the DC power off due to a system problem. In addition to protecting your equipment, battery and power supply from self-inflicted trouble, PWRguard Plus DC Protectors also have a sense input connection inside that can be wired to a switch, contact closure or can be triggered by a 3 to 5 volt DC. This means, PWRguard Plus can also be controlled with a Key Locking Switch to prevent radio operation during down time, system or antenna repairs, cut power based on input from a water or a heat sensor, or turn power on or off with a photo-electric circuit or other low current sensor switch; only your imagination can limit the useful applications for the PWRguard Plus! Note: For additional product information, please look at the files under the "Documentation" tab. Ideal for radio communications systems that rely on DC power, West Mountain Radio PWRguard Plus DC Protectors are a very useful addition to almost any 12 Volt DC powered system. Order one for your special application today!
( 1 )
$114.95
West Mountain Radio ISOpwr+ Auxiliary Battery Isolators
West Mountain Radio ISOpwr+ Auxiliary Battery Isolators protect the primary battery while supplying power to the "spare" battery and equipment. With an ISOpwr+ isolator, the vehicle battery will never be drained by leaving the equipment turned on, so the vehicle will always start! ISOpwr+ Isolators are automatic solid-state ON-OFF switches, without relays, that charge an auxiliary battery and run mobile radio equipment, powered by the vehicle alternator when the car is running. The ISOpwr+ turns ON when the car is running and the line is over 13.3 volts. The ISOpwr+ turns OFF when the alternator is not running and the vehicle battery has fallen below 12.6 volts, but equipment will continue to run from the auxiliary battery. ISOpwr+ Auxiliary Battery Isolators work safely with all types of batteries including 12-volt standard Lead-Acid, Flooded Lead Acid, Gelled and AGM. They are ideal for use in all vehicles utilizing an auxiliary battery, for many diverse purposes: Radio Command mobile set ups for ARES, RACES, FEMA; contest VHF/UHF rovers; medium powered Amateur Radio equipment; re-charging stations for electric model airplanes, boats and cars; DC powered TVs or stereos in RVs and campers, and so much more! ISOpwr+ isolators may be used without an auxiliary battery, as a power interrupt, to automatically turn on a transceiver or other device only when the car is running. In this battery saving application, the radio will turn off automatically after a short delay when the vehicle ignition is turned off, so you won't have to remember to turn off the transceiver. ISOpwr+ features a USB port for setting operating thresholds and for monitoring and has a smaller and lighter weight enclosure. West Mountain Radio ISOpwr+ Auxiliary Battery Isolator Specifications: Operating Voltage: 20 V maximum Quiescent Current: Less than 5 mA Maximum Current: 40 A Voltage Drop: 0.25 V at 1A, diode drop Series Resistance: 0.01 ohms maximum Switch Time-Constant: 5 seconds Turn ON Threshold: 13.3 Vdc (+/- 0.1 V) Turn OFF Threshold: 12.6 Vdc (+/- 0.1 V) Green LED: Indicates the ISOpwr+ output is ON Size: 4.50 x 3.40 x 1.40 in, 11.4 x 8.6 x 3.5 cm Weight: 0.9 lbs., 0.4 kg Connectors: Powerpoles Enclosure: Heatsink, black anodized aluminum, painted aluminum cover Note: For additional product information, please look at the files under the "Documentation" tab.
Not Yet Reviewed
$119.95
West Mountain Radio CLRstereo ClearSpeech® Dual Noise Reduction DSP
West Mountain Radio CLRstereo ClearSpeech® Dual Noise Reduction DSP – an extremely effective tool for improving communication clarity. Dynamic DSP noise reduction adapts to changes in the interference and signal. It passes voice and CW while attenuating atmospheric noise, hum, hiss, whistles, and static. It effectively removes heterodynes, ignition noise, lightning crashes, power line noise. QSO's are more fun without all the background noise. The DSP recognizes the intermittent nature of CW and allows it to pass noise free. CLRstereo features independent "Left" and "Right" channels, each with DSP filter level, Tone and Volume (audio level) controls and a red "CLIP" LED to indicate when that channel input level is too high. Next to the front panel toggle Power switch is a green LED to indicate powered condition. CLRstereo can process two channels simultaneously, for use with two separate radios or with a radio that features two separate receivers, such as Main and SUB. Please note that the CLRstereo does not contain a power amplifier. While the output is sufficient for a headphone or low level speakers, the CLRstereo is intended to be connected to an amplified speaker system. Specification of the CLRstereo ClearSpeech® Dual Noise Reduction Digital Signal Processor: - Enclosure: Metal, powder coat painted - Dimensions (WHD): 7.25 x 1.5 x 3.5 in. - Input: 1/8 in. (3.5 mm) stereo female (TRS) - Output: 1/8 in. (3.5 mm) stereo female (TRS) - Power Input: USB or 2.1 mm, center positive - Power Requirements: USB power or 9 to 15 Vdc, 212 mA typical - Audio Output, max.: 2 V p-p into a high impedance load; 560mVpp into 8 ohm input - Clipping Level: 585 mV p-p (volume control full clockwise) - Noise Reduction: Adaptive, single tone greater than 50 dB
Not Yet Reviewed
$349.95
West Mountain Radio CLRmodule ClearSpeech® DSP Noise Reduction Board
West Mountain Radio CLRmodule ClearSpeech® DSP Noise Reduction Board – a DIY project for DSP filtering. Once configured and developed, the CLRmodule can connect directly to a radio audio. It is extremely effective in making improvements to the clarity and readability of radio communications. QSO's will be more enjoyable without the fatigue of background noise. In many cases, there will be a noticeable improvement in understanding weaker signals, making contacts, and general listening. CLRmodule Digital Signal Processor (DSP) noise reduction is excellent for passing voice and CW as the DSP recognizes the intermittent nature of CW and allows it to pass noise free. It attenuates atmospheric noise, hum, hiss, whistles, and static and effectively removes heterodynes, ignition noise, lightning crashes and power line noise. The process is dynamic and changes with the interference and the signal, but the effect is rewarding. Operation is more fun without all of the background noise. Click "More Details" and the link to the manual in the Documentation tab to read and understand very important details about how to utilize this DIY project device- the West Mountain Radio CLRmodule ClearSpeech® DSP Noise Reduction Board.
Not Yet Reviewed
$99.95
West Mountain Radio DC Power Cables
West Mountain Radio DC Power Cables are ready to connect your equipment with a variety of DC connectors, including Anderson Powerpoles. They provide the user with a multitude of options for connecting RIGrunners or other West Mountain Radio DC power products to Amateur Radio equipment or other DC electronic devices. You'll find convenient cables to connect power from RIGrunners and other equipment. There is also an assortment of DC cables used to power HF transceivers, FM transceivers, and various electronic gadgets from Powerpole-equipped power sources. Many have Powerpoles already installed at one end! Connector types include HF-radio 6-pole connectors, alligator clips, coaxial power connectors, blade connectors, ring terminals, and more. It's clear that when you want to connect DC to just about anything else, you need to order from DX Engineering to get your West Mountain Radio DC Power Cables!
( 25 )
$9.95
—
$19.95