Availability
WiMo Antenennen und Electronik Parts and Accessories
WiMo Phase Lines
WiMo Phase Lines are band-specific phasing cable assemblies, either 2 meter or 70 cm, used on the respective WiMo X-Quad Antennas or other cross-polarized Yagi. They combine the vertical and horizontal elements into either Right-Hand or Left-Hand Circular Polarization, dependent upon beam driven element position. Each cable set comes with two male Type-N connector cables, one for each polarization element, combined into one female Type-N connector for the main 50 ohm coaxial feedline to the station. WiMo Phase Lines are used in non-switchable systems.
( 2 )
$99.99
WiMo Transceiver Lifting Handles
WiMo Transceiver Lifting Handles let you lift your expensive transceiver and set it down vertically, without risking damage to the rear panel connectors. Available for a limited number of popular transceivers, these black powder-coated strong metal handles are available in two styles. Angled handles flair out, away from the controls for a better grip. Straight handles allow equipment to be set side-by-side. All versions of the WiMo lifting handles come with mounting screws. The FT-710 version of the lifting handles are angled on the front and have a cutout for the SD Card slot. The Universal version of the lifting handles are straight. Set your transceiver face up on the floor or desktop without worry. Order WiMo Transceiver Lifting Handles from DX Engineering
( 40 )
$62.99
—
$75.99
WiMo 23050 Metal Guy Ring Kits
WiMo 23050 Metal Guy Ring Kits are perfect for stabilizing WiMo metric telescoping aluminum masts. This strong, metal guy ring features a game-changing design with a cable management slot that allows for the rotation of the mast—while preventing the tangling of cables with the guys. The handy 25mm slot for cables (0.984 in.) will accommodate most rotator and RF connectors. Four plastic bushings are included: 50mm (1.969 in.), 40mm (1.575 in.), 30mm (1.181 in.), 20mm (.0787 in.). These bushings provide the flexibility to choose the correct height to guy your mast. Use more than one kit for a tall mast. Properly spaced holes provide attachment for guy ropes or lines for a three-way guying system. Note: If used to guy radiating vertical antenna tubing, non-metallic guy lines must be used.
( 2 )
$89.99
WiMo BASE-705 Desk Stand for IC-705
WiMo BASE-705 Desk Stand for IC-705 - This very flat steel plate holder for the IC-705 and other devices, gives your portable transceiver the necessary stability on the table or in the field, for portable operations. Due to the very low working height of about 2 inches (5 cm) the IC-705 is at the right height to be used comfortably, unlike mini photo tripods. The WiMo BASE-705 mount is an attractive black powder-coated steel plate that matches the radio. This thin, heavy stand with rubber feet is 7.875 in. (200 mm) wide, 3.937 in. (100 mm) deep and 0.224 in. (5.7 mm) thick and weighs about 1.8 lbs. (840 g). The mount features a standard 1/4 in. threaded stud, so the mounted QRP transceiver is very stable. A swivel ball head with a knob style set screw provides easy adjustment of correct transceiver alignment for operating and for folding the radio down for transport. Of course, with this 1/4 in. stud, tripod-style holder, you can also mount a camera! In North America, order the WiMo BASE-705 only from DX Engineering.
( 2 )
$65.99
Wimo Heavy Duty Telescoping Fiberglass Mast Extension Kits
Wimo Heavy Duty Telescoping Fiberglass Mast Extension Kits add to the bottom of and extend the height of the WMO-18333-10 Heavy Duty Mast. With appropriate guying, use one WMO-18334-01 Adaptor Tube and up to five fiberglass WMO-18334 Extension Tubes can provide a total of 14.76 ft. additional height. The first extension tube extends the Heavy Duty mast by approximately 2 ft. due to the required tubing overlap and each additional extension tube adds another 3 ft. *IMPORTANT * One WMO-18334-01 Adapter Tube (sold separately) is REQUIRED to connect the first WMO-18334 Extension Tube to the bottom of the Heavy Duty Mast. Each additional Extension Tube does not require this adaptor; as they are tapered to fit onto each other. WMO-18334 Extension Tubes can also be used to create a very portable and easy-to-assemble stand-alone mast that maintains a larger diameter for greater strength. The number of Extension Tubes used for this alternative mast is limited by the top load and guying of the mast. One of the WMO-18334-1 Adapter Tubes could be used at the very top of that alternative assembly, to protect the mast top and provide a robust antenna fastening point. Specifications of the WMO-18334: * Extension Tube Length – 3.67 ft. (112cm) * Extension Tube Top Diameter – 1.969 in. (50mm) * Extension Tube Bottom Diameter – 2.165 in. (56mm)
Not Yet Reviewed
$70.99
—
$81.99