Availability
Yaesu Transceivers, Microphones, Tuners, Rotators & More
For over 50 years, Ham Radio enthusiasts have relied on Yaesu for radios that offer exceptional performance. In that time, the company has a built a reputation for creating...
For over 50 years, Ham Radio enthusiasts have relied on Yaesu for radios that offer exceptional performance. In that time, the company has a built a reputation for creating appealing Amateur Radio gear with an equal blend of innovation, reliability and quality. DX Engineering carries a full line of Yaesu products, including trailblazing full-featured base and portable HF transceivers, compact HF mobiles, versatile VHF/UHF mobile and handheld transceivers. We offer genuine Yaesu accessories including microphones, speakers, rotators, tuners, handheld accessories and much more.
For over 50 years, Ham Radio enthusiasts have relied on Yaesu for radios that offer exceptional performance. In that time, the company has a built a reputation for creating appealing Amateur Radio gear with an equal blend of innovation, reliability and quality. DX Engineering carries a full line of Yaesu products, including trailblazing full-featured base and portable HF transceivers, compact HF mobiles, versatile VHF/UHF mobile and handheld transceivers. We offer genuine Yaesu accessories including microphones, speakers, rotators, tuners, handheld accessories and much more.
Yaesu DC Adapters and Cables
Yaesu DC Adapters and Cables are available for several models to keep your portable radio charged and running. Most of these cables will plug directly into the portable radios, and some will plug into a charging cradle, sold separately. Yaesu DC Adapters and Cables are available to keep your radio on the air.
( 38 )
$37.99
Yaesu M-90D Desktop Microphones
Yaesu M-90D Desktop Microphones utilize a finely tuned dynamic element to deliver rich low to mid frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90D is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attractive desk stand base of the M-90D features a large PTT bar switch, a PTT lock button, and both 8-pin modular and round connectors at the back. By swapping the orientation of the supplied coiled cord cable with 8-pin round and modular connectors at either end, the M-90D may be used with virtually any Yaesu HF transceiver*. For difficult band conditions, a built-in, low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone, which also uses three air cylinder tubes, similar to the M-1 Reference Microphone, to provide a lifetime of solid, smooth, and noiseless PTT operation. Yaesu M-90D Desktop Microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions (WHD): 4.17 x 7.56 x 4.98 in. (106 x 192 x 126.5mm) Height maximum when microphone head position is flat Weight: 18.70 oz. (530 g) without cable NOTE: The M-90D Mic head does not disconnect from the desk stand base for other uses. (See M-90MS Mic Head for boom or mic stand applications.) The M-90D is directly compatible with the FTDX101 Series, FTDX10, FT-991A, FT-891, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FTDX2000/D, FT-950, FT-450/D, FT-897/D, FT-857/D, FT-818ND, FT-817/ND, FT-900, FT-847, FT-920, FT-1000MP, FT-1000MP MARK-V and FT-1000MP MARK-V Field. *Optional Power Supply Kit ABB19X001 required for M-90D use with Legacy Yaesu FT-1000/D, FT-990, FT-890, FT-840 and FT-747 transceivers.
( 46 )
$199.99
Yaesu SSM-BT20 Bluetooth Mini Headsets
Yaesu SSM-BT20 Bluetooth Mini Headsets represent an ideal choice for those in pursuit of untethered communication. They boast a streamlined design, suitable for handheld radios and mobile phones and offer seamless, interference-free communication. This state-of-the-art Bluetooth headset is compatible with an extensive array of devices, including the Yaesu FT-3DE, Yaesu FT-3DR, Yaesu FTM-300DE, Yaesu FTM-300DR, Yaesu FTM-6000E, Yaesu FTM-6000R, among others. The SSM-BT20 model is equipped with a high-grade microphone, integrated with a multi-functional PTT button that can also be utilized to answer mobile phone calls. It features two volume buttons, a status LED, and two interchangeable earphone inserts with detachable open ear hooks, ensuring maximum comfort. The headset is specifically engineered for environments with low to normal noise levels. The Bluetooth headset is capable of transmitting audio up to approximately 32 ft. (10 meters) with excellent quality. This implies that the radio or mobile phone does not necessarily need to be always carried on the person. However, it is recommended to test the range in the specific environment of use to guarantee signal quality. The SSM-BT20 Bluetooth headset is supplied with a USB charging cable, enabling charging via any USB port. Whether it's a USB power adapter, USB cigarette lighter adapter, computer, notebook, or power bank, the headset can be charged with ease and convenience. Additional Features and Specifications: -Bluetooth version Ver 4.1 (profiles HSP, HFP), max. 32.81 ft. (10m) range (class 2) -Built-in lithium polymer battery -Intelligent Noise Reduction -Standby time with one battery charge: up to 400 hours -Talk time on one battery charge: up to 12 hours (continuous talk) -Dimensions: 2.362 x 0.866 x 0.591 in. (60 x 22 x 15mm) -Operating temperature: -4° F to 140° F (-20 to +60 degrees Celsius) -Charging temperature: 32° F to 113° F (0 to +45 degrees Celsius)
( 5 )
$49.99
Yaesu M-90MS Microphone and Stand Mounting Kits
Yaesu M-90MS Microphone and Stand Mounting Kits bring the great Yaesu microphone sound to your boom or mic stand, for a completely new way to enjoy your Yaesu transceiver. The Yaesu M-90MS microphone head utilizes a finely tuned dynamic element to deliver rich low to mid-frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90MS is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attached microphone cable features a PTT hand switch with an 8-pin modular connector termination. The M-90MS may be used with virtually any Yaesu HF transceiver* with some models requiring the optional SCU-53 8-pin modular jack to 8-pin round plug adapter**. For difficult band conditions, a built-in low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone. Yaesu M-90MS microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17,000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions: Diameter: 2.45 in. (62mm), Length: 6.38 in. (162mm) Weight: 7.05 oz. (200 g) with bracket, without cable NOTE: The M-90MS includes the boom or stand mount bracket. A boom or mic stand are not supplied. The M-90MS microphone head does not have a detachable connector. The Yaesu M-90MS comes with the PTT hand switch and 8-pin modular connector cable that is directly compatible with the FTDX10, FT-991A, FT-891, FT-450/D, FT-897/D, FT-857/D, FT-18ND, FT-817/ND, and FT-900. ** SCU-53 8-pin modular jack to 8-pin round plug adapter is required for use on FTDX101 Series, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FT-2000/D, FT-950, FT-920, FT-1000MP, FT-1000MP MARK-V, FT-1000MP MARK-V Field, and FT-847. *Optional Power Supply Kit ABB19X001 and SCU-53 are required for M-90MS use with Legacy Yaesu FT-1000, FT-990, FT-890, FT-840 and FT-747 transceivers.
( 5 )
$169.99
Yaesu MLS-200-M10 External Speakers
Yaesu MLS-200-M10 External Speakers are specialized to work with Yaesu FTM-10R, FTM-100DR and FTM-400DR transceivers only. These moisture and dust resistant, 4 ohm speakers handle high level audio, at a maximum of 12 watts, for use in high noise locations. Supplied with a mounting bracket and hardware, MLS-200-M10 Speakers have an unusual three-conductor miniature plug also known as TRS, or tip, ring and sleeve. This speaker cable connector combines the main and sub, from tip and ring, so they play both receivers of a dual receiver radio. Connect this capable model to almost any Yaesu or other brand transceiver that is compatible with a 4 ohm speaker. Order yours from DX Engineering!
( 8 )
$59.99
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 166 )
$1,499.95
Instant Rebate
Yaesu FTDX-101D HF/50MHz 100W Transceivers
The Yaesu FTDX-101D HF/50MHz 100W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101D may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector**, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Some of the impressive features and specs of the Yaesu FTDX-101D include: * High-Class 160 to 6 Meters 100 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. * Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) * Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR * 9 MHz IF Roofing Filters with excellent Shape Factor * 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) *Ultra-low phase noise 1st Local Oscillator * Completely independent dual receivers with general coverage receive *High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-In Main RX, Option for Sub RX) * Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101D HF/50MHz 100W Transceiver from DX Engineering. Click 'More Detail' below to see additional information about the FTDX-101D HF/50MHz 100W Transceivers. The 200 watt version, Yaesu FTDX-101MP is displayed separately in the Base Transceivers area. **NOTE: The Yaesu FTDX-101D has the VC Tune Preselector installed in the MAIN receiver and 12 kHz, 3 kHz and 600 Hz roofing filters installed in the MAIN and SUB receivers. A second VC Tune Preselector is optional for the SUB receiver and four optional roofing filters, 300 Hz and 1.2 kHz for the MAIN and SUB, are available only by transceiver special order. Installation and calibration are done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101D shipped from stock cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom built FTDX-101D.
( 53 )
$3,749.99
Instant Rebate
Yaesu FTDX-101MP HF+50MHz 200W Transceivers
The Yaesu FTDX-101MP HF+50MHz 200W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101MP may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Here are some of the impressive features and specs of the amazing Yaesu FTDX-101MP: - High-Class 160 to 6 Meters 200 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. - FPS-101 Separate External Speaker and Power Supply combination is included - Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) - Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR - 9 MHz IF roofing filter with excellent Shape Factor** - 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) - Ultra-low phase noise 1st Local Oscillator - Completely independent dual receivers with general coverage receive - High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-in Main and Sub Receivers) - Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch (AN) Click 'More Detail' below to see additional information about the FTDX-101MP HF/50MHz 200W Transceivers. The 100 watt version, Yaesu FTDX-101D is also displayed in the Base Transceivers area. Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101MP HF/50MHz 200 Watt Transceiver from DX Engineering. **NOTE: The Yaesu FTDX-101MP has the VC Tune Preselector installed in the MAIN and SUB receivers. Roofing filters installed in the MAIN and SUB receivers are the 12 kHz, 3 kHz and 600 Hz, plus a 300 Hz is installed in only the MAIN receiver. Three optional roofing filters are available, the 300 Hz for the SUB receiver and 1.2 kHz for the MAIN and SUB receivers. Installation and calibration is done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101MP ordered on the web, and shipped from stock, cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom equipped Yaesu FTDX-101MP.
( 44 )
$5,098.95
Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers
Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers continue Yaesu's legacy for legendary receiver design in a compact package, providing uncompromising performance for both mobile and stationary Amateur Radio use. High end 32-Bit floating-point DSP enhances the operating experience, providing a cleaner, clearer signal and reducing overall operator fatigue—thereby creating a more enjoyable environment for any ham. Uncompromising Receiver Circuit Design Ensures Excellent Performance: * Triple conversion with a 1st IF frequency of 69.450 MHz (SSB/CW/AM * 3 kHz roofing filter equipped as standard feature * TCXO provides plus/minus 0.5ppm high-frequency stability (-10 C to 50 C) * 3-Year manufacturer warranty 100 Watt Output: FT-891 transceivers provide a stable 100 watts (25W AM) of high-power output. High reliability is assured by Yaesu's careful circuit design with efficient thermostatically controlled dual internal fans and a diecast heat-transferring chassis. IF DSP: Yaesu's IF DSP provides effective and optimized QRM rejection. 32-bit high-speed floating-point DSP (maximum 3000 MIPS) provides cancellation/reduction (DNR) of the random noise that is so frequently frustrating while on the HF bands. Highly optimized AUTO NOTCH (DNF) automatically eliminates dominant beat tones, and the CONTOUR and the APF are very effective receiver noise reduction tools during HF-band operations. USB Connection: A native USB connection supports PC connectivity with a single cable, allowing for full rig control via a virtual serial port connection (VCP). Special features for ease of operation: * Large diameter Main Tuning Dial (1.6 in. / 41mm) with torque adjustment * Pop-up menu for quick and easy navigation * Multi-function knob * Large transmit/receive indicator * Three programmable front panel function keys Support for ATAS (Active Tuning Antenna System): FT-891 transceivers fully support the ATAS-25 and ATAS-120A Active Tuning Antenna System (optional), allowing for plug-and-play field and mobile operation. Ultra-compact: Measuring 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm), FT-891 transceivers are innovative Multi-band, Multi-mode Mobile/Portable transceivers with a rugged case design. Optional FC-50 Antenna Tuner Unit: Yaesu's FC-50 is a microprocessor-controlled antenna tuner that is designed specifically for the FT-891. An FC-50 may be easily coupled with FT-891s and includes all necessary interconnect cables for operation right out of the box. Specifications: Frequency Range: TX: 1.8-54 MHz (Amateur Bands only) RX: 30 KHz – 56 MHz Channel Step: 2/5/10 Hz (SSB, CW), 10/100 Hz (AM, FM) Frequency Stability: plus/minus 0.5 ppm 14 degrees F to 122 F (-10 C to 50 C) Modes of Emission: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM) Impedance: 50 Ohms, unbalanced Supply Voltage: 13.8V DC plus/minus 15 percent, negative ground Current Consumption: RX: 2.0A (Signal Present) TX: 23A Operating Temperature Range: 14 to 122 degrees F (-10 C to 50 C) Case Size (WxHxD): 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm) w/o knobs Weight (Approx.): 4.18 lbs. (1.9 kg) Output Power: 100W SSB/CW/FM (AM: 25W) Circuit Type: SSB/CW/AM: Triple-conversion Super-heterodyne FM: Double Conversion Super-heterodyne Intermediate Frequencies: 1st: 69.450 MHz / 2nd: 450 KHz Maximum AF Output: 2.5 W 4 ohms with 10 percent THD Audio output Impedance: 4 to 16 Ohms (8 Ohms nominal) Receiver sensitivity: * SSB/CW (S/N 10dB) 0.158uV (1.8-30 MHz), 0.125uV (50-54 MHz) * AM (S/N 10 dB) 4uV (0.5-1.8 MHz), 1.6uV (1.8-30 MHz), 1.2uV (50-54 MHz) * FM (12 dB SINAD) 0.35uV (29, 50-54 MHz) Note: For additional information, please look at the files under the "Documentation" tab. Yaesu transceivers have always represented top-of-the-line products. Yaesu continues their legendary quality and features with Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers. Order now from DX Engineering!
( 182 )
$749.95
Clearance
Yaesu RF Mu-Tune Kits and Units
Yaesu RF u-Tune* filters, pronounced "Mu-Tune", are the most advanced and selective receiver front-end preselector filters ever made available for Amateur Radio transceivers. Adding ultra-sharp selectivity, these devices dramatically enhance the receive performance of compatible Yaesu transceivers. The receiver front-end pass band provided by Yaesu RF Mu-Tune Preselector is an amazing 10 to 30 kHz, depending upon band. This can be of tremendous value in ensuring clear and quiet reception on crowded bands, especially during contest and DX operations. RF Mu-Tune Kits are external add-on options which are available in three band coverage models for ONLY Yaesu transceiver model series' FT-dx5000, FT-dx3000, FT-dx1200, FT-950 and FT-2000. Choose any one, two or three units for the band coverage you desire: *RF Mu Tune Kit A External Preselector for 160 meters *RF Mu Tune Kit B External Preselector for 80 and 40 meters *RF Mu Tune Kit C External Preselector for 30 and 20 meters Connection cables are included with each kit for the use of one, two or all three of these external units with any of the excellent Yaesu transceivers listed above. Any or all of the connected optional RF Mu-Tune Preselectors automatically adjust to your operating frequency. Especially useful on low bands where strong signals are often adjacent to the desired weak signals, the high Q and shape factor of permeability-tuning was used successfully in many classic Yaesu transceivers. The advanced circuit design and ultra-high quality components of these modern Mu-Tune units narrows the front-end pass band to only a couple dozen kilohertz. Providing interference rejection significantly better than the transceiver's standard VRF (Variable Response Filter) preselector, Mu-Tune can also be manually adjusted to provide additional relief from near frequency interference. Yaesu RF Mu-Tune Kits are the most advanced RF preselector filters ever designed for Amateur Radio transceivers. Reduced Intermodulation Distortion and enhanced Blocking Dynamic Range with a lowered noise floor in your Yaesu transceiver is available with Yaesu RF Mu-Tuning Kits. Order yours from DX Engineering. *The Greek alphabetical character "Mu" in the manufacturer's name of these products is not presently available for this web display system. The lower case letter u and the word "Mu" have been substituted. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ NOTE: Three internal only RF Mu-Tune Units, options for pre-installation ONLY into the FTdx9000MP transceiver model, are available by calling to pre-order when ordering that transceiver. Yaesu provides their installation into your specially ordered FT-dx9000MP model only. They are listed for reference as follows: MTU-160 covers the 1.8 MHz band, the MTU-80-40 covers the 3.5 and 7 MHz bands and the MTU-30-20 covers the 10.1 and 14 MHz bands. These internal only units CANNOT be used with other models. They are also pre-installed into the FTdx9000D model version. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ All other applicable Yaesu transceivers model series' (FT-dx5000, FT-dx3000, FT-dx1200, FT-950 and FT-2000) require the Mu-Tune Kit A, B or C External Preselectors as described at the top of this listing and in the detailed listings.
( 2 )
$699.99
$559.99