Availability
CHAMELEON ANTENNA Antennas
Chameleon Antenna FSR Faraday Strip Radial System
The Chameleon Antenna FSR Faraday Strip Radial System gives field operators a compact, MPAS READY radial and counterpoise solution that boosts efficiency, improves safety, and packs easily into any portable setup. At only 3 pounds and stored as two 6x4-inch bundles, the FSR offers significant performance improvements over traditional wire radials without adding bulk or complexity. Each Faraday Strip is built from a multi layer composite structure that pairs a Copper–Nickel–Polyester conductive fabric core—woven in a multidirectional diamond pattern—with durable TAN 900D Oxford outer layers for UV, moisture, and abrasion resistance. Three brass grommets on every strip maintain strong mounting points and consistent electrical continuity across the system.
( 6 )
$130.00
Chameleon Antenna CHA-Blank Antenna Mount Adapters
Chameleon Antenna CHA-Blank Antenna Mount Adapters support the CHA-SS58, CHA-SS17, and CHA-SS25 whips, allowing users to select the best configuration for their needs. Whether you need a compact setup or an extended-range solution, these adapters provide flexibility for various HF band applications. The modular design lets operators customize their antenna system based on specific mission requirements and operational conditions.
( 13 )
$132.00
Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper
Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper is an eight-band HF antenna for use on the 80 - 10 meter Amateur Radio bands without the need for a tuner and 60 meters is possible with the help of an antenna tuner. Near-Vertical Incident Skywave (NVIS) communication is possible, but dependent on the configuration of the antenna when installed. The CHA LEFS 8010 is designed for the trail and its minimalistic design and lightweight components make this antenna ideal for backpackers, hikers, bikers, campers, and survival communication. The sturdy line winder with integral high-efficiency impedance matching transformer, ultra-thin 20 gauge PTFE Kevlar antenna wire and lightweight Micro 90 paracord enables extremely portable eight-band operation without the extra bulk of an antenna tuner. Leave the antenna tuner at home, just bring a radio and a pair of boots! Order a Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper for your next expedition from DX Engineering today! -Includes- 1 - CHA LEFS – 63 ft. Tinned Copper KEVLAR PTFE (Teflon) wire. 1 - CHA LEFS – 67 ft. Tinned Copper KEVLAR PTFE (Teflon) wire) (-70°C to 150°C) 1 – 50 ft. MICRO 90 Paracord 1 – Wire Winder Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Lightweight 8010 End Fed Halfwave Sloper Additional Features and Specifications: -Frequency Range- 80M - 3.500 – 4.000 MHz 40M - 7.00 - 7.300 MHz 30M - 10.100 – 10.150 20M - 14.100 - 14.350 MHz 17M - 18.068 - 18.168 MHz 15M - 21.000 – 21.450 MHz 12M - 24.890 – 24.990 MHz 10M - 28.000 – 29.700 MHz * SWR: Typically, less than 2.0:1 (Frequency Ranges Listed Above) * Power: 500W SSB, 250W CW, 150W Digital * RF Connector: UHF SO-239 * Length: 63 ft / 130 ft with Extension * Operating Temperature -94° – 302° (-70°C to 150°C) * Weight: 1.5 lbs.
( 2 )
$225.00
Chameleon Antenna EMCOMM-III-B HF Base Antenna
Chameleon Antenna EMCOMM-III-B HF Base Antenna is an effective multi-band High Frequency (HF) antenna specially designed for short to long range base station HF communications. Due to configuration and installation flexibility and low-visibility design, it is ideal for home use even in developments with a Home Owners Association (HOA) and Covenants, Conditions, and Restrictions (CCRs). It is also highly suitable for military, government agencies, non-governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and shortwave listening. The EMCOMM III Base antenna is configurable to facilitate both long distance (DX) and Near-Vertical Incident Sky wave (NVIS) communication and using an automatic antenna tuner or coupler with memory settings will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. SWR: Subject to frequency and configuration, but typically less than 2.7:1. An antenna tuner or coupler may be required depending upon frequency and configuration. The EMCOMM III Base antenna can be installed by the operator in less than 30 minutes. It should be installed as high and straight as possible, but almost any available supports, such as an existing antenna tower, trees, a flag pole, the eaves of a house, or a non-conductive fence can be used with satisfactory results. The EMCOMM III Base antenna is comprised of a matching transformer and a 130 foot antenna wire on a line winder - making an effective HF base station antenna system for permanent installation as a primary or backup HF base station antenna. Specifications: * Frequency: 80M - 10M * Power: 200 watt SSB or 100W CW/Digital * Length: 130 ft. Copper Clad Kevlar® PTFE (-70 degrees C to 150 degrees C) wire * Weight: 2.2 Lb. The antenna system consists of: * 1 X CHA EMCOMM III matching box * 1 X 130 ft. Copper Clad Kevlar® Wire
( 14 )
$195.00
Chameleon Antenna TACYAGI-70 UHF Tactical Foldable Yagi Antennas
Chameleon Antenna TACYAGI-70 UHF Tactical Foldable Yagi Antennas are a compact, high-performance UHF foldable Yagi antenna designed for emergency communication, tactical operations, and portable field use. Ideal for portable operating scenarios like POTA, SOTA, camping, RVing, or operating from balconies in apartments or condos, it offers exceptional versatility and portability. With a frequency range of 400–470MHz, 7dBi of gain, and a front-to-back ratio greater than 15dB, it significantly extends the range of handheld UHF FM transceivers and supports horizontal polarization for CW, SSB, or digital modes with radios like the Yaesu FT-817/818, Yaesu FTX-1F, or Icom IC-705.
Not Yet Reviewed
$155.00
Chameleon Antenna Baluns UNUNs and Chokes
Chameleon Antenna Baluns UNUNs and Chokes are available in a variety of ratios that include 1:1, 4:1, 6:1 and 9:1 and they are compatible with an array of antennas and systems. These Baluns and UNUNs will enhance impedance transformation and signal efficiency while minimizing unwanted interference. The FT240-43 toroidal cores are precisely wound with PTFE-insulated, 14AWG enameled copper wire and assembled in a durable, weatherproof housing that's suitable for even the most adverse weather conditions. The top mounted stainless steel eyebolt provides a secure anchor point for base or portable operation.
( 9 )
$115.00
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions enhance the range and versatility of antennas like the CHA-BV and other MPAS configurations. They improve resonance and efficiency across various HF bands, making them ideal for portable and field use.
( 1 )
$116.00
CHAMELEON ANTENNA CHA MIL EXT 2.0 Portable Whip Antenna Extensions
The CHAMELEON ANTENNA CHA MIL EXT 2.0 Portable Whip Antenna Extension has been designed to offer maximum portability and extended frequency range performance for use with the CHA MIL 2.0 whip for a portable or backpack antenna system. This collapsible antenna extension must be used with the CHA MIL 2.0 in order to create a 18 ft. 2 in. long portable antenna. When combined with any HYBRID series antenna bases (like the CHA HYBRID-MICRO from the CHA MPAS 2.0) the CHA MIL EXT 2.0 will operate at all frequencies from 1.8-54 MHz. These four 28 in. sections of 0.75 in. diameter of aluminum alloy tubing are designed for portable HF communication where rapid deployment and simplicity of operation is essential but compactness is primordial. The CHA MIL EXT 2.0 whip is an EXCELLENT add-on for the CHA MIL 2.0, which has aluminum tubing walls that are thicker and stiffer than the version 1.0. Also, the joint inserts and the main tubing are made of a single piece thus reducing losses. CHA MIL EXT 2.0 Specifications: * Frequency: Adds 160 to 12 Meter coverage when used w/CHA-MIL 2.0 Whip Antenna * Power handling: 1,500W SSB * Extension connection: 3/8-in.-24 threads stud/socket * Length Collapsed: 28.1 in. * Length Extended: 105.5 in. * Requires external wide-range antenna tuner BEFORE PERMANENT INSTALLATION IT IS IMPORTANT TO WATERPROOF THE UNIT. The use of anti-oxidant compound on all whip joints will also improve the efficiency of aluminum conductor connections.
( 9 )
$185.00
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper is a four-band HF antenna for use on the 40-10 meter Amateur Radio bands without the need for a tuner and 30, 17, and 12 meters is possible with the help of a tuner. Near-Vertical Incident Skywave (NVIS) communication is possible, but dependent on the configuration of the antenna when installed. The CHA-LEFS-4010 is designed for the trail and its minimalistic design and lightweight components make this antenna ideal for backpackers, hikers, bikers, campers, and survival communication. The built-in line winder with its integral high-efficiency 49:1 impedance matching transformer and ultra-thin 20 AWG PTFE antenna wire enables extremely portable four-band operation without the extra bulk of an antenna tuner. With the addition of user supplied antenna wires that have been cut to length for the desired band of operation, two insulators and support rope, this CHA-LEFS-4010 antenna can be converted to a standard or inverted V dipole antenna. Elevate your portable operations with the exceptional performance and convenience of the CHA-LEFS-4010. This antenna system is available in 2 configurations consisting of the following components: CHA-LEFS-4010 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch CHA-LEFS4010-316 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch - 1 X 25ft. RG-316 Coaxial Cable with RFI Choke
( 3 )
$175.00
—
$250.00
CHAMELEON ANTENNA Portable HF Antennas
CHAMELEON ANTENNA Portable HF Antennas are made with the finest materials available. They can be used for multiple purposes such as Base Station, Portable, Mobile, Marine, EMCOMM, MARS/CAP, ARES, SATERN, RACES, First Responders, Emergency Preparedness, SKYWARN, Military and Government communications and much more. CHAMELEON ANTENNA Portable HF Antennas are very effective antennas for deed-restricted lots and for rapid-deployment communication systems. Built to last, they survive very harsh conditions where other antennas fail. The wide bandwidth-capability of Chameleon Antennas provides reliable and efficient communications. Unlike other multiband antennas, they require no changing of switches, jumpers or coils. Their simple design and integrated impedance matching transformer doesn't require special assembly tools. Be sure to click the "More Detail…" link on our page for additional information on each antenna. Do you need a rapid-deployment HF antenna that's stealthy, economical, light weight and manageable by a single person? If so, give CHAMELEON ANTENNA Portable HF Antennas a look… then order yours from DX Engineering!
( 53 )
$160.00
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna is specially designed for short to long range portable and man-pack HF communications. The EMCOMM III Portable antenna is ideal for hiking, backpacking, and both tent and Recreational Vehicle (RV) camping. It is also highly suitable for military, government agencies, non- governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and amateur radio operators (hams) involved in field communication and disaster preparedness. The EMCOMM III Portable antenna is configurable to facilitate Near-Vertical Incident Sky wave (NVIS) communication and will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. An antenna tuner or coupler may be required for in some instances. The EMCOMM III Portable antenna can be deployed by the operator in the field in less than 15 minutes, using almost any available support, with no masts or guying required. The EMCOMM III-P Portable antenna is comprised of a matching transformer, a 73 foot antenna wire on a line winder, and a 25 foot counterpoise - making a highly portable and effective HF antenna system. CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna Specifications: - Frequency: 160M - 6M (dependent upon tuner) - Power: 100W SSB or 50W CW - Length: 73' + 25" Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire - Weight: 1.5 Lb. The EMCOMM-III-P Portable HF Antenna system consists of: 1 X CHA EMCOMM III matching box 1 X 73' Copper Clad KEVLAR Wire (Radiator) 1 X 25' Copper Clad KEVLAR Wire (Counterpoise)
( 12 )
$190.00
Chameleon Antenna Hybrid Mini BNC Portable Antenna Bases
Chameleon Antenna Hybrid Mini BNC Portable Antenna Bases feature a built-in 1:5 broadband matching transformer and a maximum power rating of 500W SSB, 100W CW, and 40W for high duty cycle digital modes. A 3/8-24in. threaded connector is included for mounting various antenna radiators, and a BNC female connector on the side for coaxial connection. The Hybrid Mini base also has a 3/8-24 in. stainless steel threaded bolt on the bottom.
Not Yet Reviewed
$250.00
CHAMELEON ANTENNA CHA HUB KIT
CHAMELEON ANTENNA CHA HUB KIT consists of the CHA HUB and wire used with the CHA TDL. The antenna system consists of: 1 X 25 ft. Copper Clad KEVLAR PTFE wire (-70°C to 150°C) 1 X TDL HUB
( 3 )
$122.00
Chameleon Antenna CHA Basic Limited Edition HF Antennas
Chameleon Antenna CHA Basic Limited Edition HF Antennas are high-quality entry-level antennas that are perfect for anyone looking to get into the amateur radio hobby without spending too much on their first antenna. The Basic Limited Edition antenna series represents the latest evolution in end-fed wire antennas, combining the best features of the renowned CHA EMCOMM II V2 and CHA EMCOMM III base/portable antenna models to provide unmatched performance for both DX and NVIS communication. The BASIC LIMITED EDITION antennas are designed for superior performance in a compact and versatile form factor. These antennas are perfect for Amateur Radio enthusiasts who demand high efficiency and reliability for emergency communications, portable operations, and everyday use.
( 7 )
$125.00
—
$135.00
Chameleon Antenna Hybrid Micro Matching Unit Bases
Chameleon Antenna Hybrid Micro Matching Unit Bases support a wide range of portable and semi permanent antenna configurations. They work seamlessly with numerous wires, whips, and compatible accessories, offering both a stable mounting platform and dependable impedance matching for many types of antenna systems. Each unit features an SO 239 connector on the side, a 3/8 24in. female antenna connection on the top, and a 3/8 24in. male counterpoise connection on the bottom. An integrated antenna shackle assembly, including a split ring, bolt, and nut, provides additional attachment flexibility for various deployment scenarios. When paired with the appropriate accessories, these bases support configurations such as horizontal NVIS, sloping wire, inverted L, manpack vertical, portable vertical, and portable dipole configurations. They also perform exceptionally well with the CHA MIL Whip, telescopic whips, mounts, and masts. Engineered for field reliability, the Hybrid-Micro bases carry a power rating of 100W SSB/CW and 25W for all other modes, making them ideal for operators seeking adaptable, durable solutions for portable HF operations.
Not Yet Reviewed
$225.00
Chameleon Antenna URT1 Mounting Brackets
Chameleon Antenna URT1 Mounting Brackets provide a mounting solution for the Chameleon Antenna URT1 Remote Antenna when used portable with any of the MPAS Ready Antenna System Components. The kit contains a mounting bracket for the URT1, a stainless steel insulated mounting head, and a stainless steel mounting rod as well as stainless steel hardware. Electrical connection to the antenna is accomplished in one of two ways: direct feeding using the insulated mounting head or by coax feeding one of the feed coils such as the CHA-Blank-adapter or the Hybrid Mini. This mount makes the Chameleon Antenna URT1 a versatile addition to your portable antenna lineup. Note: The URT1 is sold separately.
Not Yet Reviewed
$115.00
Chameleon Antenna CHA Square SO-239 Blank Adapters
Chameleon Antenna CHA Square SO-239 Blank Adapters are a compact, heavy duty inline adapter featuring dual SO 239 (UHF female) connectors and a 3/8-24in. bottom male stud. This design allows seamless connection between SO 239 equipped antennas or accessories while mounting directly to any 3/8-24in. female antenna support, such as tripods, masts, magnetic mounts, or vehicle brackets. Precision machined from high grade materials, the adapter delivers excellent RF conductivity, rugged mechanical strength, and long term reliability across HF, VHF, and UHF bands. Ideal for portable, mobile, base, and test configurations requiring fast, modular equipment integration.
Not Yet Reviewed
$132.00
CHAMELEON ANTENNA Counterpoise Kits
Chameleon Antenna Counterpoise Kits are made for portable antenna deployments, ideal for operations like POTA, SOTA and Field Day. These counterpoise wire kits work with many portable vertical antennas to create the required ground plane radials for improved transmitted and received signals. Each wire is terminated with a 3/8 in. ring terminal that attaches to the base of the Chameleon Hybrid MICRO, Hybrid MINI, Chameleon Jaw Mount, or other vertical antenna bases with a 3/8 in. screw terminals for radials. Two kits work better than one. Spread radial wires out evenly, using as many as practical, for best results. These counterpoise kits contain the following: 4 - 25 ft. Tinned copper wire with KEVLAR PTFE (Teflon) jacket 4 - Isolating O-rings. 4 – Plastic Wire Winders 4 - Steel Tent Stakes An effective counterpoise is an important part of any vertical antenna system. Be sure to order your CHAMELEON ANTENNA Counterpoise Kits from DX Engineering!
( 10 )
$106.00
Chameleon Antenna Broadband Base Dipoles
Chameleon Antenna Broadband Base Dipoles are proven broadband antennas that cover from 3.5 MHz to 54.0 MHz or 1.8 MHz to 54 MHz depending on the length of the antenna. Three models are available to offer a solution that will fit your lot: 60 ft., 120 ft., and 146 ft. Each antenna comes with a broadband matching transformer that can handle 100W SSB, 50W CW, and 25W on all other modes. The Broadband Dipoles can be raised either in an Inverted V configuration, or if you have the room for it, a horizontal dipole. This allows for limited space installations and slightly different radiation patterns. Utilizing 16-guage Tinned Copper Kevlar reinforced, PTFE wire, these antennas are as rugged as they are practical. Simply connect one leg of the wire to the antenna terminal on the matching network, connect the other wire to the ground terminal, hoist the matching network, stretch out the legs and attach them to supports and you have an antenna that will cover the HF spectrum. To obtain matches across all bands that an antenna covers, an antenna tuner is required. The Chameleon Antenna B3D-60 is a 60-foot dipole covering 3.5 to 54 MHz. Featuring two 30-foot legs, it is an excellent choice for portable operations, Field Day events, and installations where space is limited. Its compact size allows multi-band HF operation while fitting comfortably on smaller properties. The Chameleon Antenna B3D-120 is a 120-foot dipole covering 1.8 to 54 MHz. With two 60-foot legs, it is designed for operators who have more available space and want improved low-band performance while still working within moderate space constraints. It offers excellent coverage from 160 meters through 6 meters. The Chameleon Antenna B3D-146 is a full-size 146-foot dipole covering 1.8 to 54 MHz. Featuring two 73-foot legs, it is optimized for installations with sufficient space to accommodate a full-length dipole. This configuration delivers outstanding low-band performance and maximum operating flexibility across the HF spectrum and 6 meters.
Not Yet Reviewed
$136.00
—
$192.00
Chameleon Antenna CHA TD Lite 2.0 Tactical Dipole Antennas
Chameleon Antenna CHA TD Lite 2.0 Tactical Dipole Antennas are multi-band HF dipole antennas capable of operating from 1.8 – 54 MHz without modification when used with an external antenna tuner. The CHA TD Lite 2.0 offers the convenience of a single, easy to erect antenna that is easily installed in a number of configurations such as a Standard Dipole, Inverted V, Inverted L, End Fed, NVIS and Sloper configurations. Flexible support options include trees, masts, towers, or any other field expedient support structures making the CHA TD Lite 2.0 quick and easy to deploy in the field.
Not Yet Reviewed
$220.00
CHAMELEON ANTENNA Extended Antenna Wires
CHAMELEON ANTENNA Extra Wire Kits afford you the opportunity to use longer wire for their HYBRID, EMCOMM II or homebrew portable stealth antennas. With the option of either 30 ft., 60 ft., 73 ft., 130 ft. or 250 ft., these antenna wires may improve your overall efficiency. Due to the different antenna-wire connector on the EMCOMM II and HYBRID models, they have four antenna wire configurations. The 250 ft. model is simply copper clad PTFE wire on a winder: * 1 X 30 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-30FTEMCOMMII for the EMCOMM II or CHA-30FT30HYBRID for the HYBRID model. Both offer a replacement 30 ft. radiator for their respective models OR * 1 X 60 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-60FT-EMCOMM for the EMCOMM II or CHA-60FT-HYBRID for the HYBRID model. Both offer a replacement 60 ft. radiator for their respective models. OR * 1 X 73 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * X Winder * 1 X Stainless Steel Carabiner Use part number CHA-73FTEMCOMMII for the EMCOMM II or CHA-73FT-HYBRID for the HYBRID model. Both offer a replacement 73 ft. radiator for their respective models OR * 1 X 130 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * 1 X Winder * 1 X Stainless Steel Carabiner Use part number CHA-130FT-EMCOMM for the EMCOMM II or CHA-130FT-HYBRID for the HYBRID model. Both offer a replacement 130 ft. radiator for their respective models. OR * 1 X 250 ft. Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire * 1 X Winder These antenna wires are not just ordinary wire! These wires are comprised of a proprietary combination of Kevlar®, Teflon® (PTFE) and soft copper. Even at temperatures as extreme as -90 to plus 300 degrees Fahrenheit, these antenna wires are up to the job with supple and non-brittle stretch-free operation. Upgrade your EMMCOMM II or HYBRID antennas or build your own stealth wire antenna. Order CHAMELEON ANTENNA Extra Wire Kits from DX Engineering! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$116.00
—
$189.00
Chameleon Antenna 33-Foot Counterpoise Kits
Chameleon Antenna 33 Foot Counterpoise Kits are purpose built for portable antenna deployments, making them ideal for POTA, SOTA, Field Day, and other field operations. These counterpoise wires enhance the performance of many portable vertical antennas by providing the essential ground plane radials needed for stronger transmitted and received signals. Each 33 foot wire is terminated with a 3/8 inch ring terminal, allowing quick and secure attachment to the base of the Chameleon MPAS, Basic Vertical (BV), Hybrid MICRO, Hybrid MINI, Chameleon Jaw Mount, or any other vertical antenna system that uses 3/8 inch radial screw terminals. For best performance, using two kits is recommended—spreading the radial wires evenly and deploying as many as practical will yield the most effective results. These counterpoise kits contain the following: 4 - 33ft. Tinned copper wire with KEVLAR PTFE (Teflon) jacket 4 - Isolating O-rings. 4 – Plastic Wire Winders 4 - Steel Tent Stakes An efficient counterpoise is a critical part of any vertical antenna setup. Elevate your portable operations and ensure peak performance by choosing Chameleon Antenna 33 Foot Counterpoise Kits—available now from DX Engineering.
Not Yet Reviewed
$130.00
Chameleon Antenna SOTA Activation Zone Model 1 Portable HF Antennas
Chameleon Antenna SOTA Activation Zone Model 1 Portable HF Antennas were designed specifically for the demanding conditions and constraints encountered during Summits on the Air (SOTA) activations or other extreme outdoor radio sports. The CHA-SOTA-AZ-1 will operate from 60 - 10 meters with an antenna tuner. When packed, it is small and lightweight. It can be used on summits that do not have trees using a user supplied telescopic mast, or other suitable antenna support such as a fishing or kite pole. Note: The transceiver shown in the user manual and other documentation is NOT included.
( 3 )
$146.99
Chameleon Antenna SOTA Activation Zone Model 2 Portable HF Antennas
Chameleon Antenna SOTA Activation Zone Model 2 Portable HF Antennas were designed specifically for the demanding conditions and constraints encountered during Summits on the Air (SOTA) activations or other extreme outdoor radio sports. The CHA SOTA AZ-1 will operate on 40, 30, and 20 meters and does not require an antenna tuner. When packed, it is small and light weight, and it can be used on summits that do not have trees using an operator supplied 10-15ft. telescopic mast or other suitable support. Both Near Vertical Incident Skywave (NVIS) propagation and DX communication are supported by this antenna. The CHA SOTA AZ-2 by Chameleon Antenna comes pre-assembled, ready-to go, and sets a new standard for radio sport antennas. With its versatile design and high-quality components, operators can confidently deploy the CHA SOTA AZ-2 in a variety of environments and operational conditions, ensuring reliable and efficient communication.
( 1 )
$208.99