Availability
Hustler Antenna VHF/UHF Base Antennas
Hustler G-3754 37-54 MHz Monoband Vertical Antennas
Hustler G-3754 37-54 MHz Monoband Vertical Antennas are full size 5/8 wave, 6 meter vertical antennas from Hustler. They were developed in the early 1970s and have been available ever since. Designed for commercial VHF and government VHF-Low Band use, they are extremely durable. They also provide gain of 6.4 dBi! A full size radiator with a lower radiation angle concentrates power closer to the horizon, where you want it. The elements are easily adjusted to any frequency from 37 through 54 MHz, so these antennas vary in height depending on the frequency to which they are tuned. For 6 meters, they are about 8.3 ft. tall. Tuned radials at the base of the vertical enhance electrical performance and help provide a 6 meter bandwidth of over 4.0 MHz with 2:1 SWR or less. An integral shunt-fed matching system also provides a DC path to ground to drain off static, resulting in extremely low-noise antennas. Hustler G-3754 antennas are a value-packed option for 6 meters and handle 300 watts CW/FM/AM. VHF verticals are usually mobile/repeater FM antennas but, due to their wideband coverage, you may want to use one of these in the SSB portion of the band. Purchase your Hustler G-3754 37-54 MHz Monoband Vertical Antennas from DX Engineering and start having more fun on 6 meters!
( 6 )
$398.99
Hustler Base Model G7-144 Vertical Antennas
Hustler Base Model G7-144 Vertical Antennas feature a 7 dBd maximum effective omni-directional gain; providing a consistent pattern, even in marginal areas. Extremely low-angle stacked 5/8 wave radiators deliver superior gain. Due to robust manufacture, harsh environments do not affect their mechanical or signal integrity. They are constructed from high-strength aluminum and employ a fiberglass radome for all-weather durability. Hustler G7-144 antennas are totally self-supporting and are easily assembled. When they are disassembled, their longest section is approximately 4 ft., which makes them easy to handle and move. They are great for EMCOMM and Field Day, or use one for your QTH or repeater service. When it comes to your signal, a good antenna is a must! Order Hustler Base Model G7-144 Vertical Antennas and give your signal a good boost!
( 12 )
$519.99
Hustler Base Model G6-270R Vertical Antennas
Hustler Base Model G6-270R Vertical Antennas are dual-band collinear designs using phased 5/8 wave elements on both bands. Two 5/8 wave elements are used on 2 meter bands, and four 5/8 wave elements are utilized on the UHF band. They offer a solid gain of 6dB on both bands for outstanding fringe-area performance. Featuring a one-piece tapered fiberglass radome, they eliminate the inter-modulation and mechanical problems associated with 2 and 3-piece UHF radome designs. Hustler G6-270R vertical antennas are shunt-fed and DC-grounded for lightning protection and static discharge and will survive winds of up to 100 mph. Hustler antennas have a long-standing reputation for high quality and exceptional craftsmanship. Order Hustler Base Model G6-270R Vertical Antennas from DX Engineering for your 2 meter and 70cm operations!
( 12 )
$494.99
Hustler Base Model G6-144B Vertical Antennas
Hustler Base Model G6-144B Vertical Antennas utilize a 5/8 wave lower and a phase matched 5/8 wave upper collinear radiator that have been spaced for the optimum lowest angle of radiation. These Hustler Master Gainer™ antennas are FCC accepted for commercial repeater applications at 6-dBd gain (based on EIA Standard RS-329: gain compared to 1/2 wave dipole). Their total useable bandwidth is more than 2MHz at under 1.5:1 SWR without any degradation of gain. This characteristic makes these antennas ideal for duplex operation. G6-144B antennas are totally self-supporting and are easily assembled. Although just less than 10 ft. in height, when disassembled their longest part is approximately 4 ft., making them very easy to handle and move about. Consider one for EMCOMM, repeater service or your QTH! Hustler antennas are known for their quality and robustness. Order Hustler Base Model G6-144B Vertical Antennas for your application from DX Engineering!
( 10 )
$339.99
Hustler Base Model G6-440 Vertical Antennas
Hustler Base Model G6-440 Vertical Antennas feature sleek, one-piece, tapered fiberglass radomes that eliminate the intermodulation products and mechanical problems associated with 2 and 3-piece UHF radome designs. These high gain verticals offer solid 6-dB gain for outstanding fringe area performance. Hustler Antenna G6-440 verticals are factory-tuned for a quick and easy installation. Get your 70cm signal out there! Order Hustler Base Model G6-440 Vertical Antennas from DX Engineering!
( 5 )
$459.99
Hustler DCL-B Discone Base Station Scanner Antennas
Hustler DCL-B Discone Base Station Scanner Antennas are ideal for scanning Amateur Radio, public-service, aircraft, mobile, and public-safety frequencies. DCL-B Discones include 50 ft. of RG-58/U coaxial cable with a PL-259 on one end and a BNC-type connector on the other end. Historically, base and handheld scanners have used BNC connectors. These antennas offer a wide frequency-coverage range from 40-950 MHz and are vertically polarized. No adjustments are required to move from band to band. Hustler DCL-B Discone antennas have a reliable, high-strength design incorporates solid aluminum rods and hardware and includes a robust mounting assembly. DCL-B Discones use 55 in. long cone elements and can be mounted on a flat surface or vertical pipe with an outside diameter up to 1.250 in. Want wideband receive? 40 to 950 MHz with unity gain qualifies! Order Hustler DCL-B Discone Base Station Scanner Antennas from DX Engineering for your VHF and UHF monitoring!
( 5 )
$108.99
Hustler Base Model G7-220 Vertical Antennas
Hustler Base Model G7-220 Vertical Antennas are specially designed to achieve the lowest possible radiation angle and maximum efficiency on 1-1/4 meters. G7-220 antennas utilize a 5/8 wave lower, 5/8 wave middle, and a 5/8 wave upper collinear radiator that have all been spaced for optimum low-angle radiation. These antennas also feature shunt-fed matching and DC grounding for static surge protection. Hustler Antenna base model G7-220 vertical antennas are totally self-supporting and are easily assembled. When they are disassembled, the longest part is approximately 4 ft., which makes them easy to handle and move. Made of the highest-quality materials for maximum durability and weather resistance, they have a wind survival rating of up to 100 mph. Since they are a sufficiently broadband antenna, when set to the dimensions shown in the instruction sheet these antennas should require no further adjustments. Their total useable bandwidth is more than 6-MHz. with SWR under 1.5:1 without any degradation of gain. That makes these antennas ideal for duplex operation. Get your signal "out there" on 1.25 meters! Order Hustler Base Model G7-220 Vertical Antennas from DX Engineering!
( 6 )
$519.99
Hustler Replacement Upper Phasing Coils
Hustler Replacement Upper Phasing Coils are original replacements for specific Hustler VHF verticals in the G6 and G7 model series.
Not Yet Reviewed
$65.99
Hustler Base Model G3-144 Vertical Antennas
Hustler Base Model G3-144 Vertical Antennas are designed with the cost-conscious amateur in mind. Their aluminum construction with fiberglass radome and stainless hardware lets them stand up to the weather. These are small, inexpensive 2 meter antennas that deliver more gain (3-dBd) and are tougher than other antennas in their price range. At less than 8 ft. in height, Hustler Antenna G3-144 vertical antennas are ideal for your QTH, Field Day or emergency command post. Get some vertical bang for your buck! Order Hustler Base Model G3-144 Vertical Antennas from DX Engineering!
( 1 )
$158.99
Hustler Base Model G6-450-1 Commercial Vertical Antennas
Hustler Base Model G6-450-1 Commercial Vertical Antennas feature sleek, one-piece, tapered fiberglass radomes that eliminate the intermodulation products and mechanical problems associated with 2 and 3-piece UHF radome designs. These high-gain verticals offer solid 6-dBd gain (8.15 dBi) for outstanding fringe area performance. Designed for commercial/government use in the UHF commercial frequencies, from 450 to 458 MHz, they are well suited for fire, police, local government and commercial applications. Hustler Antenna G6-450-1 verticals are factory-tuned for a quick and easy installation. Give your UHF signal the boost a good gain antenna can supply! Order Hustler Base Model G6-450-1 Commercial Vertical Antennas from DX Engineering!
Not Yet Reviewed
$459.99
Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas
Whoa… check out these Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas! These antennas will handle 600 watts of continuous power with a 1.5:1 or better SWR across all 4 MHz! With 6-dBd gain- that's 8.1-dBi gain- you're going to have TERRIFIC ERP! Top that with 140 mph wind survival; 19.5 foot one-piece heavy fiberglass radome, up to 3.25 inch mast mounting, brass radiators with internal feed lines of copper, and direct DC grounding for lightning protection and you've got yourself some super durable antennas! These are most typically installed as a radio club repeater antennas; true mountain toppers. But for the discerning ham who wants the ultimate 2-Meter Base Vertical, one so ruggedly built that it will last a very, very long time, grab one of these Hustler HX6-14448 Extreme Duty 2-Meter Base Antennas from DX Engineering!
( 1 )
$2,599.99
Hustler Antenna G7-150-2 Commercial Base Vertical Antennas
Hustler Antenna G7-150-2 Commercial Base Vertical Antennas feature a 9.15 dBi maximum effective gain from 148 to 155 MHz. This high gain, the result of stacked 5/8 wave radiators, provides a more consistent coverage pattern, even in marginal areas. Constructed from high-strength aluminum and fiberglass, harsh environments do not affect their mechanical or electrical integrity and provide all-weather durability. Hustler G7-150-2 vertical antennas are totally self-supporting and easily assembled. Their longest individual part is approximately 4 ft. This reduced disassembled size makes them easy to handle, assemble, and move. Hustler Antenna G7-150-2 Commercial Base Vertical Electrical Characteristics: * Frequency coverage: 154-161 MHz * Maximum power input: 600 watts FM * Gain: 9.15 dBi (7 dBd) * Bandwidth: 3 MHz. under 1.5:1 * Bandwidth: 6 MHz for 2:1 or less * Impedance: 50 ohms nominal * Lightning protection: Shunt fed direct ground * Termination: Type N female Hustler Antenna G7-150-2 Commercial Base Vertical Mechanical Characteristics: * Length: 15 ft., 4 in. * Weight: 10 lbs. * Wind Survival: 100 mph * Equivalent flat plate area: 1.16 sq. ft. * Lateral thrust: 46 lbs. at 100 mph * Mounting: Up to 2.0 in. O.D. pipe When your communications requirements fall within the VHF Public-Safety or commercial spectrum, one of these Hustler G7-150-2 Commercial Base Vertical Antennas from DX Engineering will support those needs.
Not Yet Reviewed
$519.99
Hustler Antenna G7-150-3 Commercial Base Vertical Antennas
Hustler Antenna G7-150-3 Commercial Base Vertical Antennas feature a 7 dBd maximum effective gain from 161 to 167 MHz. This high gain, the result of stacked 5/8 wave radiators, provides a more consistent coverage pattern, even in marginal areas. Harsh environments do not affect their mechanical or electrical integrity. They are constructed from high-strength aluminum and fiberglass for all-weather durability. Hustler G7-150-3 vertical antennas are totally self-supporting and are easily assembled. Their longest individual part is approximately 4 ft. This reduced disassembled size makes them easy to handle, assemble, and move. Electrical characteristics: * Frequency coverage: 161-167 MHz * Maximum power input: 600 watts FM * Gain: 7 dBd (9.15 dBi) * Bandwidth: 3 MHz. under 1.5:1 * Bandwidth: 6 MHz for 2:1 or less * Impedance: 50 ohms nominal * Lightning protection: Shunt fed direct ground * Termination: Type N female Mechanical characteristics: * Length: 15 ft., 4 in. * Weight: 10 lbs. * Wind Survival: 100 mph * Equivalent flat plate area: 1.16 sq. ft. * Lateral thrust: 46 lbs. at 100 mph * Mounting: Up to 2.0 in. OD pipe When your communications requirements fall within the VHF Public-Safety or commercial spectrum, one of these Hustler G7-150-3 Commercial Base Vertical Antennas from DX Engineering, will support those needs.
Not Yet Reviewed
$519.99
Hustler Heavy-Duty HD9 Series Base Vertical Antennas
Hustler Heavy-Duty HD9 Series Base Vertical Antennas are ideal for applications that call for extraordinary reliability and are suitable for the most difficult environments, remote locations, or tall tower installations. A 1.9 in. diameter, white, extruded fiberglass, weatherproof enclosure combined with a heavy wall (0.225 in.) aluminum base that provides vertical rigidity in winds up 130 mph. The weatherproof sealed Type N female connector includes removable drain plugs and O-rings to allow proper drainage of internal condensation in the upright or inverted position. The Hustler HD9 offset radiator design features phased 1/2 wave radiators which yield precise radiation angle control and very wide bandwidth, made of copper to minimize the possibility of intermodulation. The heavy-duty radiating elements and feed system allow a maximum power of 400 watts. Built-in lightning protection connected to a 0.2 in. diameter copper tube runs the length of the antenna for grounding to the support structure. It includes high-quality, rigid, galvanized steel mounting clamps to prevent ratcheting or twisting of the antenna in high winds. The mounting clamps will accept masts from 1.5 in. to 3.25 in. diameter, or angle members up to 2.5 in. per side. Hustler Heavy-Duty HD9 Series Base Vertical Antennas specifications: * Frequency range: 430 to 450 MHz * Gain: 9 dBd (11.15 dBi) * Bandwidth: 20 MHz * V.S.W.R.: 1.5:1 * Polarization: Vertical * Power rating: 400 watts maximum * Termination: Type N Female * Vertical aperture (3 dB from maximum): 7 degrees * Weight: 13.70 lb. * Wind load (lateral thrust at 100 mph): 92 lbs. * Wind area (flat plate equivalent): 1.3 sq. ft. (0.12 sq. m.) * Maximum wind speed: 130 mph * Feed lines: Copper * Radiators: Copper * Fiberglass enclosure color: White * Mounting: Top or side mount * Galvanized steel mounting clamps accept support pipes up to 3.25 in. O.D. * Lightning protection: Direct ground
Not Yet Reviewed
$1,994.99
Hustler Antenna G7-150-1 Commercial Base Vertical Antennas
Hustler Antenna G7-150-1 Commercial Base Vertical Antennas feature a 9.15 dBi maximum effective gain from 148 to 155 MHz. This high gain, the result of stacked 5/8 wave radiators, provides a more consistent coverage pattern, even in marginal areas. Constructed from high-strength aluminum and fiberglass, harsh environments do not affect their mechanical or electrical integrity and provide all-weather durability. Hustler G7-150-1 vertical antennas are totally self-supporting and easily assembled. Their longest individual part is approximately 4 ft. This reduced disassembled size makes them easy to handle, assemble, and move. Hustler Antenna G7-150-1 Commercial Base Vertical Electrical Characteristics: * Frequency coverage: 148-155 MHz * Maximum power input: 600 watts FM * Gain: 9.15 dBi (7 dBd) * Bandwidth: 3 MHz. under 1.5:1 * Bandwidth: 6 MHz for 2:1 or less * Impedance: 50 ohms nominal * Lightning protection: Shunt fed direct ground * Termination: Type N female Hustler Antenna G7-150-1 Commercial Base Vertical Mechanical Characteristics: * Length: 15 ft., 4 in. * Weight: 10 lbs. * Wind Survival: 100 mph * Equivalent flat plate area: 1.16 sq. ft. * Lateral thrust: 46 lbs. at 100 mph * Mounting: Up to 2.0 in. O.D. pipe When your communications requirements fall within the VHF Public-Safety or commercial spectrum, one of these Hustler G7-150-1 Commercial Base Vertical Antennas from DX Engineering will support those needs.
Not Yet Reviewed
$519.99