Availability
Hustler Antenna Antennas
Hustler 6BTV 6-Band HF Vertical Antenna and DXE Installation Guide Packages
Hustler 6BTV 6-Band HF Vertical Antenna and DXE Installation Guide Packages are trapped-vertical antennas that provide an omni-directional pattern. 6BTVs were designed as self-supporting verticals to provide efficient operation in the 10, 15, 20, 30, 40, and 75 or 80 meter bands. These antennas perform well in restricted space areas. For peak performance, a field of radial wires should be used. Hustler 6-BTVs provide for automatic selection of bands through the use of optimum-Q traps which are individually and precisely tuned and internally sealed at the factory. These traps are parallel-tuned circuits, which provide very effective isolation between the vertical sections, permitting precise multi-band operation. Broadband operation, with low SWR over the entire ham band, (limited on 80 and 75 meters), is possible in a proper installation. These antennas were designed to provide optimum performance from both an electrical and mechanical standpoint. Mechanically, these antennas boast a heavy-duty base and heavy-duty aluminum tubing throughout. The mechanical assembly is accomplished with all stainless steel hardware. Performance provided by the Hustler 6BTVs is better than any other antenna of this type. Broad-banding is such that one measurement and setting permits both phone and CW operation. The antenna provides nominal 52-ohm base impedance when installed and tuned according to the instructions. The radiation efficiency is equal to, or greater than, other trap verticals. An optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance. Want a multi-band vertical antenna with a proven track record? Order Hustler 6BTV 6-Band HF Vertical Antenna and DXE Installation Guide Packages from DX Engineering!
( 44 )
$499.98
Hustler Base Model G6-270R Vertical Antennas
Hustler Base Model G6-270R Vertical Antennas are dual-band collinear designs using phased 5/8 wave elements on both bands. Two 5/8 wave elements are used on 2 meter bands, and four 5/8 wave elements are utilized on the UHF band. They offer a solid gain of 6dB on both bands for outstanding fringe-area performance. Featuring a one-piece tapered fiberglass radome, they eliminate the inter-modulation and mechanical problems associated with 2 and 3-piece UHF radome designs. Hustler G6-270R vertical antennas are shunt-fed and DC-grounded for lightning protection and static discharge and will survive winds of up to 100 mph. Hustler antennas have a long-standing reputation for high quality and exceptional craftsmanship. Order Hustler Base Model G6-270R Vertical Antennas from DX Engineering for your 2 meter and 70cm operations!
( 12 )
$494.99
Hustler 4BTV 4-Band HF Vertical Antenna and DXE Installation Guide Packages
Hustler 4BTV 4-band HF vertical antenna and DXE installation guide packages are 4-band, trap vertical antennas that provide an omni-directional pattern. The 4BTVs are designed as self-supporting verticals to give optimum operation in the 10, 15, 20, and 40 meter bands. They can also be upgraded to operate on 75 or 80 meters. These antennas perform well in restricted space areas. For optimal performance, radial wires should be used. The Hustler 4-BTVs provide an electrical selection of bands through the use of optimum Q traps, which are individually and precisely tuned and internally sealed at the factory. The traps are parallel-tuned circuits, which provide efficient isolation between the vertical sections, permitting multi-band operation. Broadband operation, with low SWR over the entire ham band, is possible in a proper installation. The antennas are designed to provide for optimum performance from both an electrical and a mechanical standpoint. Mechanically, these antennas boast a heavy duty base and heavy duty aluminum tubing. The mechanical assembly is accomplished with all stainless steel hardware. The performance provided by the Hustler 4BTVs is better than that of any other antenna of this type. The broadbanding is such that one measurement and setting permit both phone and CW operation. The antennas provide a nominal 52 ohm base impedance when installed and tuned. The radiation efficiency is equivalent to, or greater than, other trap verticals. The optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance.
( 21 )
$369.98
Hustler Stainless Steel Springs with Coupling Stud
Hustler stainless steel springs with coupling stud are designed to fit the bottom position on vertical masts. They feature protective spring caps, an exclusive hex nut tightening system, and a copper braided center conductor to prevent detuning.
( 5 )
$65.99
Hustler 5BTV 5-Band HF Vertical Antenna and DXE Installation Guide Packages
Hustler 5BTV 5-Band HF Vertical Antenna and DXE Installation Guide Packages are trapped-vertical antennas that provide an omni-directional pattern. 5BTVs were designed as self-supporting verticals to provide efficient operation in the 10, 15, 20, 40, and 75 or 80 meter bands. These antennas perform well in restricted space areas. For peak performance, a field of radial wires should be used. Hustler 5-BTVs provide for automatic selection of bands through the use of optimum-Q traps which are individually and precisely tuned and internally sealed at the factory. These traps are parallel-tuned circuits, which provide very effective isolation between the vertical sections, permitting precise multi-band operation. Broadband operation, with low SWR over the entire ham band, (limited on 80 and 75 meters), is possible in a proper installation. These antennas were designed to provide optimum performance from both an electrical and mechanical standpoint. Mechanically, these antennas boast a heavy-duty base and heavy-duty aluminum tubing throughout. The mechanical assembly is accomplished with all stainless steel hardware. Performance provided by the Hustler 5BTVs is better than any other antenna of this type. Broad-banding is such that one measurement and setting permits both phone and CW operation. The antenna provides nominal 52-ohm base impedance when installed and tuned according to the instructions. The radiation efficiency is equal to, or greater than, other trap verticals. An optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance. Want a vertical antenna with a proven track record? Order Hustler 5BTV 5-Band HF Vertical Antenna and DXE Installation Guide Packages from DX Engineering!
( 22 )
$459.98
Hustler Base Model G6-144B Vertical Antennas
Hustler Base Model G6-144B Vertical Antennas utilize a 5/8 wave lower and a phase matched 5/8 wave upper collinear radiator that have been spaced for the optimum lowest angle of radiation. These Hustler Master Gainer™ antennas are FCC accepted for commercial repeater applications at 6-dBd gain (based on EIA Standard RS-329: gain compared to 1/2 wave dipole). Their total useable bandwidth is more than 2MHz at under 1.5:1 SWR without any degradation of gain. This characteristic makes these antennas ideal for duplex operation. G6-144B antennas are totally self-supporting and are easily assembled. Although just less than 10 ft. in height, when disassembled their longest part is approximately 4 ft., making them very easy to handle and move about. Consider one for EMCOMM, repeater service or your QTH! Hustler antennas are known for their quality and robustness. Order Hustler Base Model G6-144B Vertical Antennas for your application from DX Engineering!
( 10 )
$339.99
Hustler Base Model G7-144 Vertical Antennas
Hustler Base Model G7-144 Vertical Antennas feature a 7 dBd maximum effective omni-directional gain; providing a consistent pattern, even in marginal areas. Extremely low-angle stacked 5/8 wave radiators deliver superior gain. Due to robust manufacture, harsh environments do not affect their mechanical or signal integrity. They are constructed from high-strength aluminum and employ a fiberglass radome for all-weather durability. Hustler G7-144 antennas are totally self-supporting and are easily assembled. When they are disassembled, their longest section is approximately 4 ft., which makes them easy to handle and move. They are great for EMCOMM and Field Day, or use one for your QTH or repeater service. When it comes to your signal, a good antenna is a must! Order Hustler Base Model G7-144 Vertical Antennas and give your signal a good boost!
( 12 )
$519.99
Hustler Stainless Steel Ball Mounts
Hustler Stainless Steel Ball Mounts offer exceptional performance and quality with their 180 degree adjustable reinforced ball. These mounts feature a professional-quality Cycolac base for great mechanical stability. And Hustler's exclusive "C" backup plate allows for an external installation. These mounts are compatible with all Hustler and other 3/8-24 in. threaded-base antennas. Mounting hardware and a cork pad are included. NOTE: These mounts require drilling the vehicle. These mounts are tough and strong! They are ideal for long stainless steel whips or MO-2 masts with multiple resonators. Order your Hustler Stainless Steel Ball Mounts from DX Engineering!
( 7 )
$64.99
Hustler G-3754 37-54 MHz Monoband Vertical Antennas
Hustler G-3754 37-54 MHz Monoband Vertical Antennas are full size 5/8 wave, 6 meter vertical antennas from Hustler. They were developed in the early 1970s and have been available ever since. Designed for commercial VHF and government VHF-Low Band use, they are extremely durable. They also provide gain of 6.4 dBi! A full size radiator with a lower radiation angle concentrates power closer to the horizon, where you want it. The elements are easily adjusted to any frequency from 37 through 54 MHz, so these antennas vary in height depending on the frequency to which they are tuned. For 6 meters, they are about 8.3 ft. tall. Tuned radials at the base of the vertical enhance electrical performance and help provide a 6 meter bandwidth of over 4.0 MHz with 2:1 SWR or less. An integral shunt-fed matching system also provides a DC path to ground to drain off static, resulting in extremely low-noise antennas. Hustler G-3754 antennas are a value-packed option for 6 meters and handle 300 watts CW/FM/AM. VHF verticals are usually mobile/repeater FM antennas but, due to their wideband coverage, you may want to use one of these in the SSB portion of the band. Purchase your Hustler G-3754 37-54 MHz Monoband Vertical Antennas from DX Engineering and start having more fun on 6 meters!
( 6 )
$398.99
Hustler Standard Resonators
Hustler Standard Resonators are available for 80, 75, 60, 40, 30, 20, 17, 15, 12, and 10 meters. These resonators can handle up to 400 watts PEP; that's enough power for almost any mobile installation!. Using the included Allen wrench, whip position is firmly set in the resonator whip tube with two 3/32 Allen set screws. Resonator whip adjustment allows for the fine tuning of these efficient mono-band mobile antennas to the lowest SWR for your operating frequency. These resonators complement Hustler mounts, mobile masts, and other accessories to custom-build your mobile HF antenna systems. Order Hustler Standard Resonators from DX Engineering for exciting HF mobile operations!
( 44 )
$41.99
—
$71.99
Hustler Mobile Mast Quick Disconnect Couplers
Hustler Mobile Mast Quick Disconnect Couplers allow the user to quickly disconnect their antenna from the base with a convenient press-and-twist antenna release. These couplers are for 3/8-24 mounts and are machined to close internal tolerances to prevent antenna loss by vibration. The couplers are manufactured from 100 percent stainless steel and are specially designed to prevent dirt or ice freeze-up. Hustler QD-2 quick disconnects are compatible with Hustler mobile masts and other 3/8-24 antennas and accessories. Want to grab your antenna and go? Order Hustler Mobile Mast Quick Disconnect Couplers from DX Engineering!
( 6 )
$55.99
Hustler Super Magnetic Mounts
Hustler Super Magnetic Mounts exert an impressive 95 lbs. of pull strength! These powerful magnetic bases have a 5 in. diameter magnet complete with over 16 ft. of quality RG-58 coax terminated with a PL-259 (UHF male) connector. Hustler recommends these bases for tall antennas with standard 3/8-24 threaded bases. These mounts are recommended for antennas up to 55 in. long and less than 1.5 in. diameter. Commonly used HF wire-wound fiberglass whips are perfect for use with these magnet mounts. They are also good for Hustler mobile masts and standard resonators. Due to their very-strong magnetic grip, watch your fingers when attaching these mounts to the car body! When you need your antenna to stick, use Hustler Super Magnetic Mounts from DX Engineering!
( 8 )
$55.99
Hustler HF Mobile Antenna Masts
If you're serious about HF mobile operation, choose Hustler HF Mobile Antenna Masts. Hustler represents convenience and versatility for mobile HF operations. Hustler offers fixed and folding-style high-quality mobile masts made with heat treated double-wall aluminum, brass fitting with 3/8-24 stainless steel studs that fit your custom HF mobile antenna installation. Match Hustler masts with their expansive line of Standard or Super Resonators and components and you'll soon learn why Hustler is an industry leader in HF mobile antennas. Hustler's mid-top loading design for HF mobile antennas provides the highest efficiency and a stronger signal as compared to base loaded models, including "screwdriver" antennas. Hustler resonators are available for all Amateur bands from 80 through 10 meters, including WARC bands. MO-1 – 54 in. mast with fold-over at sedan roof line 15 in. above the base for hood, fender or trunk mount, natural finish MO-2 – 54 in. mast with fold-over at 27 in. above the base for bumper and hitch level mount, natural finish MO-3 – 54 in. mast with no fold-over, white vinyl covered, ideal for marine applications MO-4 – 22 in. short mast for truck top, white vinyl covered, including three longer stainless steel whips to allow each Hustler resonator used to properly tune. Hustler MO series masts are resonant on 50 MHz. Foldable models MO-1 and MO-2 have a shake-proof clutch sleeve. Add a resonator to make a "monoband" HF plus 6 meter antenna. Add a VP-1 Mobile Mast Multi-Band Adapter to create a mobile antenna with three HF bands… plus 6 meter! The choice of bands is yours and you can change bands by just changing resonators whenever you want, made especially easy with the QD-2 Quick Disconnect. NOTE: A Hustler SSM-2 Ball Mount or other heavy-duty 3/8-24 antenna mount is required. Add a RSS-2 Resonator Spring to protect it against low branches. These Hustler masts, resonators and accessories have been available since the 1960s. They were so well designed that they are still a great choice for HF mobile. Order Hustler HF Mobile Antenna Masts from DX Engineering and build the high-performance HF mobile antenna of your dreams!
( 20 )
$44.99
—
$73.99
Hustler Super Resonators
Hustler Super Resonators are available for 80, 75, 40, 20, 15, and 10 meters. Hustler Super Resonators can handle up to 1 kW PEP and have slightly more bandwidth than Standard Resonators, especially on 40, 75, and 80 meters. Resonator whip adjustment allows for the fine tuning these efficient, mono-band, mobile antennas to the lowest SWR. Using the included Allen key, whip position is firmly set in the resonator whip tube with two 3/32 Allen set screws. These resonators complement Hustler mounts, mobile masts, and other accessories to custom-build your mobile HF antenna. Hustler resonators and super resonators have been on the market since the 1960s. The really good stuff usually stays around! Order Hustler Super Resonators from DX Engineering and go HF mobile... big time!
( 31 )
$78.99
—
$128.99
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$7.99
—
$98.99
Hustler MX-2 Monoband 2 Meter Mobile Antennas
Hustler MX-2 Monoband 2 Meter Mobile Antennas provide 3.4 dB gain and can handle up to 200 watts. The height of the MX_2 antenna is 4.49 ft. and is adjustable for the best SWR. The Hustler MX-2 mobile antenna features an NMO style, 10 oz. magnetic base and 17 ft. of RG-58/U coax with a PL-259 connector installed. For the best 2-meter mobile antenna performance, order a Hustler MX-2 Monoband 2 Meter Mobile Antenna from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$79.99
—
$94.99
Hustler MX-270 Dual Band 2 Meter/70cm Mobile Antennas
Hustler MX-270 Dual Band 2 Meter/70cm Mobile Antennas are designed to perform in the toughest environments and feature an ultrasonically welded coil to ensure mechanical integrity and durability. The Hustler MX-270 provides 2.4 dB gain on 2M and 4.0 dB on 70cm and can handle up to 100 watts. The height of the MX-270 antenna is 3.28 ft. and is adjustable for the best SWR and comes equipped with an NMO style magnetic base and 17 ft. of RG-58/U coax with a PL-259 connector installed. For the best 2M/70CM mobile antenna performance, order an MX-270 Dual Band 2 Meter/70cm Mobile Antenna from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 2 )
$114.99
Hustler 30 Meter Add-On Kits
Hustler 30 meter add-on kits modify your Hustler 4-BTV or 5-BTV antenna for 30 meter operation. These add-on kits replace the original 56 in. 40 meter tube with a 30 meter trap and 2 shorter tubes. The 3 and 6-element spider assemblies are also eliminated from your antenna. Complete instructions are included to ease installation.
( 28 )
$94.99
Hustler Mobile Mast Multi-Band Adapters
Hustler Mobile Mast Multi-Band Adapters are designed to adapt any 3/8-24 Hustler vertical mast to accept three HF Resonators for tri-band operation. They easily and quickly provide automatic band switching using any three Hustler HF mobile resonators. The adapters require no additional mast or antenna tubing for setup.
( 6 )
$17.99
Hustler Antenna SF-2 Mobile Antennas
Hustler Antenna SF-2 Mobile Antennas will make your 2-meter mobile rig a real performer! These 5/8 wave antennas are bang-for-the-buck bargains with good gain, durability, and a standard threaded base. SF-2 antenna features: * 3.4 dB gain * 5/8 wave, stainless steel construction * 100 watt rating * Fits standard 3/8 in. x 24 thread (mount not included) * 51 in. long Like many Hustler Antenna products, SF-2 mobile antennas have a long history. When Hustler finds something that works... they keep it! Do your mobile rig a favor. Order one of these Hustler Antenna SF-2 Mobile Antennas from DX Engineering and enjoy your 2-meter QSOs!
( 9 )
$43.99
Hustler Stainless Steel Resonator Impact Springs
Hustler stainless steel resonator impact springs are designed for use between the resonators and mast. They are manufactured from high quality, durable stainless steel for maximum durability. The impact springs absorb shock when the antenna strikes overhanging objects and they feature a copper braided center conductor to prevent detuning. The Hustler stainless steel resonator impact springs have female threads on one end and male threads on the other. They are not intended for use as mast shock absorbers, only to prevent damage to resonators.
( 2 )
$40.99
Hustler MKR-2 VHF Radial and Mounting Kits
Hustler MKR-2 VHF Radial and Mounting Kits include a heavy duty zinc plated mast mounting bracket, hardware and three decoupling radials. This MKR-2 kit is designed to convert the specified Hustler antennas for fixed base station use with the added benefit of the performance being comparable to higher priced base station antennas. Accepts VHF antennas with a standard 3/8 – 24 threaded stud. Fits these Hustler VHF antenna models: RX-2, SF-2, RX-220, SF-220, CG-144, CG-220, CGT-144 and CGT-220
Not Yet Reviewed
$48.99
Hustler Base Model G6-440 Vertical Antennas
Hustler Base Model G6-440 Vertical Antennas feature sleek, one-piece, tapered fiberglass radomes that eliminate the intermodulation products and mechanical problems associated with 2 and 3-piece UHF radome designs. These high gain verticals offer solid 6-dB gain for outstanding fringe area performance. Hustler Antenna G6-440 verticals are factory-tuned for a quick and easy installation. Get your 70cm signal out there! Order Hustler Base Model G6-440 Vertical Antennas from DX Engineering!
( 5 )
$459.99
Hustler Base Model G7-220 Vertical Antennas
Hustler Base Model G7-220 Vertical Antennas are specially designed to achieve the lowest possible radiation angle and maximum efficiency on 1-1/4 meters. G7-220 antennas utilize a 5/8 wave lower, 5/8 wave middle, and a 5/8 wave upper collinear radiator that have all been spaced for optimum low-angle radiation. These antennas also feature shunt-fed matching and DC grounding for static surge protection. Hustler Antenna base model G7-220 vertical antennas are totally self-supporting and are easily assembled. When they are disassembled, the longest part is approximately 4 ft., which makes them easy to handle and move. Made of the highest-quality materials for maximum durability and weather resistance, they have a wind survival rating of up to 100 mph. Since they are a sufficiently broadband antenna, when set to the dimensions shown in the instruction sheet these antennas should require no further adjustments. Their total useable bandwidth is more than 6-MHz. with SWR under 1.5:1 without any degradation of gain. That makes these antennas ideal for duplex operation. Get your signal "out there" on 1.25 meters! Order Hustler Base Model G7-220 Vertical Antennas from DX Engineering!
( 6 )
$519.99