Availability
I0JXX Antennas
I0JXX 23cm Yagi Antennas
I0JXX 23cm Yagi Antennas are highly regarded by amateur radio operators worldwide for their innovative design, premium materials, and exceptional craftsmanship. These antennas are optimized for maximum forward gain in the 1296 MHz band. Available in models with 16, 36, or 52 elements, each antenna is capable of handling up to 250 watts PEP. At the feedpoint, a low-loss Type-N female coaxial connector is used, and a balun is included for optimal performance. Assembly is straightforward thanks to clearly arranged, richly illustrated, and multilingual instructions (English, German, French, and Italian), significantly reducing setup time. If you're seeking a high-performance, precision-engineered 23cm beam antenna, look no further than the I0JXX 23cm Yagi series.
( 2 )
$239.99
—
$315.99
I0JXX Parabolic Antenna Feedpoint Elements
I0JXX Parabolic Antenna Feedpoint Elements capture the signals reflected from the parabolic dish and shield them from extraneous radiation from other sources. These signals are then passed on to the antenna and amplifier electronics. I0JXX Parabolic Antenna Feedpoint Elements are made of high quality aluminum and come equipped with an SMA female connector. Additionally, a 1.57 in. (40 mm) feedpoint mounting adapter is included. Additional Features and Specifications: JXX-18470-F24 -I0JXX Part ID: FEED24JXX -24 GHz -Power Handling: 30W -SMA Female Connector -Focal Length-to-Diameter Ratio: 0.6 – 0.7 -Return Loss: ≥24dB -Weight: 1.23 oz. (35g) -Dimensions: 3.35 x 1.02 in. (85 x 26mm) -Feed Clamp: 1.57 in. (40mm) JXX-18470-F3-1F -I0JXX Part ID: FEED3 1F -Galvanic Treatment: Yellow 1200 -10 GHz -Power Handling: 100W -SMA Female Connector -Focal Length-to-Diameter Ratio: 0.3 – 0.45 -Return Loss: ≥24dB -Weight: 5.82 oz. (165g) -Dimensions: 4.92 x 2.28 in. (125 x 58mm) -Feed Clamp: 0.92 in. (23.4mm) or 1.18 in. (30mm) JXX-18470-F3-OFF -I0JXX Part ID: FEED3 OFF -Galvanic Treatment: Chromated -10 GHz -Power Handling: 100W -SMA Female Connector -Focal Length-to-Diameter Ratio: 0.6 – 0.7 -Return Loss: ≥24dB -Weight: 5.82 oz. (165g) -Dimensions: 4.92 x 2.28 in. (125 x 58mm) -Feed Clamp: 0.92 in. (23.4mm) or 1.18 in. (30mm)
( 1 )
$189.99
—
$219.99
I0JXX 70cm Yagi Antennas
I0JXX 70cm Yagi Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. They are optimized for maximum forward gain in the band, with a frequency range from 420 MHz to 450 MHz. Depending on the model, these 70cm Yagi-style antennas have 16 to 39 elements and all models handle up to 1,000 watts PEP. At the antenna feedpoint, a low-loss Type-N female coaxial connector is utilized with the T-match and incorporated RG-142 coaxial cable balun. Certain models include additional guying material to stabilize the boom. The assembly instructions are clearly arranged, abundantly illustrated and multilingual (English, German, French, Italian), greatly reducing assembly and installation time. If you are looking for a high-quality, great performing 70cm beam, look no further than I0JXX 70cm Yagi Antennas
( 2 )
$289.99
—
$549.99
I0JXX Dual Band 6M/2M Yagi Antennas
I0JXX Dual Band 6M/2M Yagi Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. They are optimized for maximum forward gain in the 6 meter and 2 meter bands, with a frequency range from 50 MHz to 54 MHz and 144MHz to 146MHz. On 6 meters, this antenna will handle up to 2,000 watts PEP and on 2M, it will handle up to 1,000 watts PEP. These dual band Yagi-style antennas have 11 (8+3) elements and the 5-piece boom sections are easy to break down and transport. Two coaxial connectors are supplied at the antenna feedpoint, one low-loss Type-N female coaxial connector is utilized for 2 meters and one UHF SO-239 connector for 6 meters. The assembly instructions are clearly arranged, abundantly illustrated and multilingual (English, German, French, Italian), greatly reducing assembly and installation time. If you're searching for a high-quality, high-performance antenna that works seamlessly on both the 6m 'magic' band and the 2m band, look no further than I0JXX Dual Band 6M/2M Yagi Antennas
Not Yet Reviewed
$469.99
I0JXX 2M Yagi Antennas
I0JXX 2M Yagi Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. They are optimized for maximum forward gain in the band, with low SWR from 144 MHz to 146 MHz, built for Horizontal Polarization, intended specifically for DX use in the SSB, CW and Digital section of the band. Cross-polarized models may be used for satellite operations. Depending on the model, these 2-meter Yagi-style antennas have 4 to 32 elements and all models handle up to 1,000 watts PEP. Models with 4 or 8 elements are also available with a boom back-end mast mount, identified at the end of the part number with a letter "B" and the word "back" in their description. At the antenna feedpoint, a low-loss Type-N female coaxial connector is utilized with the T-match and incorporated RG-142 coaxial cable balun. Certain models include additional guying material to stabilize the boom. The assembly instructions are clearly arranged, abundantly illustrated and multilingual (English, German, French, Italian), greatly reducing assembly and installation time. If you are looking for a high-quality, great performing 2-meter beam, look no further than I0JXX 2M Yagi Antennas
( 2 )
$151.99
—
$619.99
I0JXX Power Dividers
I0JXX Power Dividers serve as RF combiners and splitters for 50 ohm VHF/UHF and EHF antennas and feedlines. They are hand-tuned with advanced test equipment to achieve the specified frequency range. I0JXX Power Dividers are made with Type N and 7-16DIN female common connectors and precision Type N antenna port connectors for extremely low loss and constant impedance. They are constructed with aluminum tubing and solid metal center conductors to make air dielectric coaxial lines with nearly immeasurable insertion loss. Power Dividers are used in VHF and UHF multi-Yagi stacked arrays to impedance match two, three, four, six or eight horizontal Loop or Yagi antennas. Standard low-loss 50 ohm coaxial cable Type N male assemblies, each the exact same length are required from each antenna feedpoint to its respective power divider port. But phased wavelength cables are not required. All Yagis or horizonal loops are fed together in phase, separated by the proper stacking spacing, and pointed in the same direction. As compared to a single antenna, stacked Yagis can yield 3 dB gain for two antennas and practically 6 dB gain for four antennas, with only minor losses deducted for the feedlines, connectors and the power divider. Each pair of stacked antennas nearly doubles the effective radiated power of the station. Available now at DX Engineering, I0JXX Power Dividers offer a superior way of combining and splitting RF in stacked Loop or Yagi arrays.
Not Yet Reviewed
$127.99
—
$331.99
I0JXX 6M Yagi Antennas
I0JXX 6M Yagi Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. They are optimized for maximum forward gain in the band, with a frequency range from 50 MHz to 54 MHz and all models will handle up to 1,000 watts PEP. Depending on the model, these 6m Yagi-style antennas have 5 to 7 elements and the individual boom sections are shorter than 5ft, making them easy to break down and transport. At the antenna feedpoint, a low-loss Type-N female coaxial connector is utilized along with a hairpin matching system and balun. Certain models include additional guying material to stabilize the boom. The assembly instructions are clearly arranged, abundantly illustrated and multilingual (English, German, French, Italian), greatly reducing assembly and installation time. If you are looking for a high-quality, great performing 6M beam, look no further than I0JXX 6M Yagi Antennas
Not Yet Reviewed
$349.99
—
$509.99
I0JXX Mast Mount Low Noise Preamplifiers
I0JXX Mast Mount Low Noise Preamplifiers offer high gain amplification with excellent noise figures in VHF and UHF amateur band optimized devices for casual operation or contest-grade directional antenna systems. Built for long-term tower top use, two high-power SPDT coaxial relays are used to protect the internal, band-specific I0JXX LNA using low-loss and high-isolation interconnections. These exceptional components are housed in a specialized weather and UV resistant polyamide black case with a drip edge surrounding two downward facing Type N female connectors mounted on a rugged, 12 gauge (2mm) aluminum panel. A separate female BNC is for DC power and control voltage, intended to be sent from the required sequencer via an inexpensive coaxial cable. Extraordinary receive-transmit-receive changeover performance is achieved by these compact 12VDC mast mounted units. Their internal LNA (low noise amplifiers) offer preamplification using ultra-low noise components as good or better than a typical receiver front end, which preserves the capabilities of a low-noise antenna or stacked array and the transceive system. The internal relays are connected to bypass the internal preamplifier when power is removed. An I0JXX SEQJXXBOX Sequencer can be used to control the I0JXX Mast Mount Low Noise Preamplifiers for two-way VHF or UHF communications. I0JXX Mast Mount Low Noise Preamplifiers are built with high quality components for many years of service. View the band unit specific specifications on each part detail page.
Not Yet Reviewed
$700.99
—
$827.99
I0JXX Multi-Band VHF/UHF Log-Periodic Antennas
I0JXX Multi-Band VHF/UHF Log-Periodic Antennas are versatile multiband directional antennas that provide excellent performance over a wide frequency range. Constructed with a series of half-wave dipole driven elements positioned along a support boom, these antennas are available with 20 elements covering 100MHz to 1296MHz and 24 elements for 50MHz to 1296MHz. The larger, 24 element version includes guying material to support the boom. Both models are optimized for maximum forward gain and feature a low-loss Type-N female coaxial connector and will handle up to 200 watts PEP. The assembly instructions are clearly arranged, abundantly illustrated and multilingual (English, German, French, Italian), greatly reducing assembly and installation time. I0JXX Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. If you are looking for a high-quality, great performing beam, look no further than I0JXX Multi-Band VHF/UHF Log-Periodic Antennas.
Not Yet Reviewed
$459.99
—
$579.99
I0JXX 1090MHz ADS-B Receive Antennas
I0JXX 1090MHz ADS-B Receive Antennas are highly regarded and known worldwide for their innovative design, dedication to the use of high-quality materials and exceptional workmanship. They are optimized for the reception of aircraft ADS-B signals on 1090MHz and provide excellent directivity while rejecting interference outside of the desired receiving direction. These rugged 1090MHz Yagi-style antennas have 16 elements on a 4.76ft. long boom, with a foremast mounting configuration that will fit masts with diameters ranging from 1.38-2.36 inches. A low-loss Type-N female coaxial connector is utilized at the loop dipole. If you are looking for a high-quality antenna to receive ADS-B signals from aircraft , look no further than I0JXX 1090MHz ADS-B Receive Antennas.
Not Yet Reviewed
$189.99
I0JXX LNA Receive Preamplifiers
I0JXX LNA Receive Preamplifiers offer high gain amplification with very low internal noise for VHF and UHF amateur band optimized devices used world-wide by experimenters and contest enthusiasts. Excellent receive-only performance at low current is achieved by these compact 12VDC units, available in two connector configurations: SMA female input and output, or Type N male input and female output. LNA (low noise amplifiers) offer preamplification using ultra-low noise components as good or better than most receiver front ends, to preserve the capabilities of a low-noise antenna system. Typically, they do not have relays in the signal path that might introduce noise or loss. These devices can be used directly in most receive applications and may be used to build a sequencer-controlled Receive-Transmit relay system for two-way VHF or UHF communications. I0JXX LNA Receive Preamplifiers are built with high quality components including low-loss FR4 copper clad PCBs and environmentally safe tri-chrome high-conductivity passivated aluminum chassis. View the specific device specifications on each part detail page.
Not Yet Reviewed
$191.99
—
$223.99
I0JXX 2320MHz Antennas
I0JXX 2320MHz Antennas are highly regarded and known worldwide for their innovative design, dedication to the use of high-quality materials and exceptional workmanship. They are optimized for maximum forward gain in the band and feature 18 elements on a sturdy 2.62ft. boom and will handle up to 100W PEP. These rugged 2320MHz Yagi-style antennas are equipped with a low-loss Type-N female coaxial connector at the feedpoint and include a mast clamp to fit masts with diameters ranging from 1.18-2.36 inches. If you are looking for a high-quality beam antenna, look no further than I0JXX 2320MHz Antennas
( 1 )
$99.99
I0JXX 4-Way Rope Attachment Guy Belt for 12 Meter Fiberglass Pole
I0JXX 4-Way Rope Attachment Guy Belt for 12 Meter Fiberglass Pole with 4 large wings, it is much more than a guy ring. This JXX-SPID-GUYB-12 provides an ideal method for quickly attaching 3 or 4 guy ropes to the 12 meter (39 .4 ft.) fiberglass mast at the 7 meter (23 ft.) level. The belt is very flexible and lightweight and transfers the forces into the mast over a very large area, thus preventing damage. Simply slide the belt over the mast. Installation appears in the images.
Not Yet Reviewed
$27.99
I0JXX 2400 MHz Yagi Antennas
I0JXX 2400 MHz Yagi Antennas are optimized for satellite operation in the required 2400-2400.50 MHz frequency range for uplink to the AMSAT QO-100 geostationary Amateur Radio Transponder. QO-100 is the amateur radio payload on the Es'hail-2 telecommunications satellite from Qatar. A separate antenna is required to receive the 10 GHz downlink signal. I0JXX 2400 MHz Yagi Antennas feature 18 elements on a sturdy 2.62ft. boom and can handle up to 100W PEP. I0JXX Antennas are highly regarded by Amateur Radio operators, known worldwide for their innovative designs and dedication to the use of high-quality materials and exceptional workmanship. If you are looking for a high-quality, great performing 2400MHz beam, look no further than I0JXX 2400 MHz Yagi Antennas.
Not Yet Reviewed
$101.99
I0JXX BOX00JXX Mast Mount Project Boxes
I0JXX BOX00JXX Mast Mount Project Boxes are very useful for the VHF, UHF and SHF enthusiast or experimenter. These weather and UV resistant black polyamide thermoplastic enclosures feature a drip edge around a rugged, downward facing 12 ga. aluminum panel (thickness of 2mm) that is approximately 3.75 x 2.75 in.. This blank plate allows for customization of connector placement by drilling or punching holes only as needed. Used by I0JXX for their high quality mast-mounted preamplifiers, the 5.71 in tall enclosure secures with four stainless screws to the panel, which also features an integral bracket and included stainless steel hardware and mounting clamps for masts up to 2.32 in. (60 mm). Building your own specialized mast-mounted device such as a preamplifier and Receive-Transmit relay into a weather protected enclosure is simplified with economical I0JXX BOX00JXX Mast Mount Project Boxes – ready to keep the weather away from your ingenious tower-top device. See the product details for specifications.
Not Yet Reviewed
$38.99