Availability
Antennas
DMV Rope Guying Earth Anchors
DMV Rope Guying Earth Anchors are designed for use on ropes to build a custom guying system for your vertical antenna. They are manufactured from high-quality steel and have a protective finish applied for long-lasting durability. DMV Rope Guying Earth Anchors feature a specially designed twisted base to allow for easy installation in the ground. Specifications: - Shaft Diameter: 0.5 in. - Loop Height: 2.24 in. (loop tip to outside top of the loop) - Anchor Length: 15.00 in. - Anchor Width: 3.0 in.
Not Yet Reviewed
$11.99
Synthetic Textile Industries Antenna Support Rope
Synthetic Textile Industries Antenna Support Rope is the premium double-braided Dacron/polyester rope that Amateurs and SWLs have been using for years! Available in several sizes and spool lengths, these superior antenna support ropes are not weakened by decay or mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the braided jacket also protects the cord from damage due to ultra-violet light. Order some Antenna Support Rope today, so you will have it on hand for your next antenna project! This rope is perfect for supporting your wire and vertical antennas, but support rope should NOT be used for tower guying. For your tower guying needs, check out our Tower Guy Lines in the Tower Department here at www.DXEngineering.com
( 95 )
$13.59
—
$18.49
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$13.99
—
$19.99
DX Engineering Ground Stakes
DX Engineering Ground Stakes are used to tie down light-duty ropes of wire antennas and vertical antenna rope guys. Of course, they can be used as tent pegs as well. Stakes are designed to be easily pushed or tapped into the earth and easily removed. They have special tabs for wrapping and securing the rope. NOTE: Color and composition of ground stakes is subject to change, so items shipped are not guaranteed to be identical to the image, but will serve the function of attaching rope to the ground for tents and antenna ropes.
( 1 )
$15.49
DX Engineering Rope Hardware Kits
DX Engineering Rope Hardware Kits are exactly what you need for all kinds of antenna projects that use support rope. Designed especially for use in conjunction with Mastrant Antenna Support Rope, these rope hardware kits provide just the right size pulleys, shackles, rope clips, duplex clips, carabiners, thimbles and quick links to facilitate fast and easy rigging, raising and lowering of wire antennas and guying of vertical antennas and antenna supports. They're great for experimenters, SWLs and Radio Amateurs who need to frequently adjust or "tinker" with their antennas. When used with new wire antenna installations, these products and Mastrant Antenna Support Rope allow for easy trimming or retuning of mono and multiband dipoles, end-feds, slopers and all types of wire antennas. Just lower, trim, and raise your antenna again until it's just right. For vertical antennas and support masts, use these kits for an installation that can be adjusted and disconnected easily, without having to constantly re-tie knots and deal with tangled excess rope. These kits feature stainless steel and metal-alloy parts for excellent durability and weather resistance. They will last a very long time. Are you raising a wire or vertical antenna or mast, or are using support rope on another project where strength and convenience are equally important? Consider using Rope Hardware Kits from DX Engineering for a professional looking project that really is stronger and is SO much easier to work on!
( 33 )
$10.44
—
$18.99
Mastrant MA2 Universal Mast Guying Clamps
Mastrant MA2 Universal Mast Guying Clamps accommodate a wide range of mast diameters and support both 3 and 4-directional guying configurations. A 4-direction kit can also be used for 3-direction configuration, providing maximum flexibility for installation. MA2 brackets are made from 3/32-inch thick 304 stainless steel and feature a drilled hole to insert a screw for securing the guying clamp to the mast. Another option is to utilize a rubber pad between the clamp and the mast made from weather and UV stabilized EPDM. It spreads the pressure on the larger surface of the mast, reducing slippage and moreover isolating the clamp from the mast. The guy line holes measure 1/8-inch diameter and are compatible with shackles, chain couplers, and carabiners sized from 5/32-inch (4mm). They also accommodate thimbles from 1/16-inch (2mm) up to 5/16-inch (8mm).
Not Yet Reviewed
$18.00
Comet Dual-Band HT Antennas
Comet Dual-Band HT Antennas encompass a wide range of features and specifications to enhance your handheld transceiver or scanner operations. Whether you need a replacement antenna or just want to improve your HT's radiating efficiency and range, each Comet dual-band antenna offers a high-quality solution to your 2 meter and 70 centimeter needs. These handheld transceiver antennas offer a variety of features, such as super-flex whips and BNC, SMA, and SMA female connector schemes, in sizes to suit your needs with gain figures respective to antenna size. You will find that many of these antennas have excellent extended-receive coverage! The size of these antennas may vary, but one thing is very certain--you will get the same high-quality Comet construction with each of these Comet Dual-Band HT Antennas. Order yours today!
( 49 )
$18.49
Unified Microsystems High-Side Driver Modules
Unified Microsystems High-Side Driver Modules, (HSD-9), are the easy way to adapt a BCD-10, BCD-14, or other low-side band switching decoder to a high-side antenna or filter switch. They provide nine channels of high-side relay control when used with low-side drivers. Antenna switches are always either high-side or low-side switched. There are advantages to each, but it's a pain if your decoder and switch are different types. These HSD-9s are a convenient way to convert the BCD series or other decoders to high-side switching. Simply place an HSD-9 between the BCD-10 and your switch. Specifications: * Nine channels of control when used with BCD-10 selector modules * Board dimensions: 2.4 in. by 1.9 in. * Maximum voltage: 24V DC * Maximum current: 1A Note: Use of an HSD-9 REQUIRES a companion BCD-10 or BCD-14 Band Decoder/Antenna Selector Module or other low-side band-switching decoder. These high-side driver modules are an important component if you are you building your own automatic antenna switching system and employing switches requiring high-side drive. Use one of these Unified Microsystems High-Side Driver Modules, now available from DX Engineering, to convert your relay driver!
( 1 )
$14.99
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits
DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits consist of two tinned copper braid straps for a connection between a DX Engineering 4:1 high power UNUN and the ground radial systems and feedpoint of a vertical antenna. These straps are the correct length to allow for short, low inductance connections, and flexible to allow for the use of a tilt base with the antenna. Included with the UN-43-R, both straps measure 10 in. long, 9 in. from center to center of the preformed 1/4 in. holes, 1 in. wide, and 0.045 in. thick. The width and thickness may vary slightly as the flexible braid is stretched or compressed. DX Engineering UNUN to Vertical Antenna Feedpoint Connection Kits are the perfect choice when adding an UNUN to your antenna system.
( 2 )
$11.99
Comet Mobile Antenna Mount Adapters
Comet Mobile Antenna Mount Adapters offer flexibility when adapting between various antennas and mounts. Choose the adapter to meet your specific installation requirements from the following available adapters.
( 5 )
$19.49
DX Engineering Receive Filter Adapter Boards
DX Engineering Receive Filter Adapter Boards accept DX Engineering Receive Filters which were originally designed to plug into the DXE-NCC-1. These boards adapt all DXE-RXFL Series filters to become a plug-in module that fits into DX Engineering models DXE-NCC-2, DXE-DMC-2, DXE-RTR-2 DXE-RPA-2. Filter adapter boards are available individually. Depending upon the user's application one or two are needed. For the DXE-NCC-2 owner who wants to use two of the same filter, one in each receive channel of the unit, they will need two of these adapters and two filters. A DXE-DMC-2 user can create a special wide band pass filter with two adapters, one low pass filter and one high pass filter. DXE-RTR-2 and DXE-RPA-2 users will choose one adapter and one filter. DX Engineering Receive Filters are numbered for the key Amateur Bands on which they function. The Band Pass filter models pass RF only on the numbered band, the High Pass models on that band and all device frequencies above, and the Low Pass models work on that band and all device frequencies below. Response plots for Receive Filters are conveniently listed on a single page in this product's detail web page tab labeled "Charts and Guides".
( 1 )
$17.49
SOTAbeams Guying Hardware Packs
SOTAbeams Guying Hardware Packs include guy rings and top insulators made from acrylic to serve the needs of the portable operator. Different size rings are provided for top and middle guy rope attachment levels. Each has multiple holes for complete versatility in guy rope attachments.
( 6 )
$10.99
On Sale
WiMo Portable Mast Guy Rings
WiMo Portable Mast Guy Rings are sized for WiMo metric telescoping masts. They're made of fiberglass reinforced plastic, each with three guying thimbles for secure rope attachment without binding or cutting. These guying rings anchor themselves at the mast clamp while allowing the mast to rotate even when anchored with guy ropes. Order the size needed for your application.
( 1 )
$25.99
$19.49
Chelegance JFA Tactical Folding Dual Band HT Antennas
Chelegance JFA Tactical Folding Dual Band HT Antennas give operators a durable, and portable upgrade option for VHF/UHF handheld transceivers. Engineered for extended range dual band operation across on the 2M/70cm bands (136–174 / 400–470MHz), these tactical style foldable whips provide enhanced signal gain, and rugged field reliability. Available in six lengths ranging from 13 inches to 49 inches, they offer flexible options for everything from everyday Amateur Radio use to emergency response and tactical operations. Designed with both SMA Female and SMA Male connector configurations, these JFA antennas integrate easily with popular handhelds such as the Baofeng UV 5R, UV 82, and a wide range of compatible HT transceivers. JFA antennas improve reception for clearer, more reliable communication in demanding environments, and their foldable design allows compact storage without sacrificing deployed performance. Built for rugged reliability and effortless operation, the Chelegance JFA Tactical Folding Dual Band HT Antennas are an ideal upgrade for operators, emergency kits, and professional communication teams. Includes: * 1- JFA Tactical Folding Antenna * 1 - Rubber O-Ring Adapter: Optional spacer ring for better fit on certain handheld radios * 1 -Hook & Loop Fastening Strap: Used to secure the antenna when folded for easy transport
Not Yet Reviewed
$10.99
—
$14.99
SOTAbeams Pico Trap Kits
SOTAbeams Pico Trap Kits are a pair of miniature antenna traps that you can build to create a super lightweight portable multiband HF wire antenna. Designed for QRP portable operations at 10 watts or less, Pico Traps allow the hobbyist to make their own two or three band dipole or end-fed halfwave. Pico Traps are: - The smallest, lightest traps on the market - Easy to adjust in series or parallel modes - Super for multi-band stealth antennas - Streamlined shape to reduce snagging on vegetation - Attachment points for antenna wire. Work great with Stealth Wire - Easily waterproofed with Liquid Electrical Tape for extended use - Can be mounted inside of 1 inch PVC conduit - Weigh less than 0.2 oz. Perfect for use with IC-705, FT-817, FT-818, KX3, KX1, HB1B and other similar radios. Instructions are linked in the Documents tab on the "More Detail" page. What do you get with a Pico Trap kit? 2 x High quality Pico Trap PCBs 2 x T50-6 toroids 2 x nylon mounting kits for toroids 2 x SMD 100pF AVX RF Capacitors, 0805 High Q, Ultra-Low ESR 22 AWG (0.6mm) wire for toroids Pico Trap Kit Specifications: Size: 1.4 x 0.6 in. (36 x 15 mm) Weight: less than 0.18 oz. (5 g) Low loss: typically less than 0.35 dB. Less than 0.75 dB worst-case. Inductor Q: > 240 @ 14 MHz [Source - MicroMetals] Capacitor Q: >> 1000 @ 14 MHz Rp: > 24,000 Ohms @ 12 MHz Suggested resonant frequency range: 10 - 25 MHz Power rating: 10 Watts Higher power SOTAbeams Trap Kits are available from DX Engineering: 100W: SBM-HFAT-101 20W: SBM-HFAT-102
( 2 )
$19.99
Chelegance JMount-336 Triple Magnet Mobile Antenna Mounts
Chelegance JMount-336 Triple Magnet Mobile Antenna Mounts feature a spring-loaded tri-magnet base with three powerful 3.5-inch magnets, ensuring a secure grip on your vehicle—even on curved surfaces, while the spring-loaded tri-magnet base absorbs shock for stable antenna performance. Designed with smooth, rounded edges, the JMount-336 ensures comfortable, abrasion-free installation. Its premium finish not only enhances corrosion resistance but also delivers a sleek, professional appearance that complements any setup. When paired with the optional Chelegance NCE-CH0020012 3/8-24in. to M10 threaded antenna adapter (sold separately), this mount supports a wide range of antenna whips and telescopic antennas, including the MC-750. Additionally, the JMount-336 is compatible with a variety of other mobile antenna mounts, making it a versatile choice for diverse installation needs.
Not Yet Reviewed
$15.99
DX Engineering ATBB-3 Boom Brackets
DX Engineering ATBB-3 Boom Brackets are high strength aluminum boom brackets, with a stainless steel bolt and nylon insert lock nut, designed for 3 in. booms. These boom brackets are designed to attach near the ends of a 3 in. boom. They allow for the attachment of truss support cables from these brackets to the truss bracket, to support a long boom Yagi beam antenna.
Not Yet Reviewed
$12.99
Firestik Antenna Company SS-124A Stainless Steel Flat Mounts
Firestik Antenna Company SS-124A Stainless Steel Flat Mounts are 1" wide, 4" long and 0.125 mm thick. These solid mounts come with a 1" stainless steel bolt, washer and nut to secure the mount to any flat surface. This mount includes an SO-239 to 3/8-24 stud mount allowing for direct connection of your coax to your mount as soon as you get it in place. It is recommended that antennas shorter than 4' be used with this specific mount.
Not Yet Reviewed
$16.49
DX Engineering ATBB-2 Boom Brackets
DX Engineering ATBB-2 Boom Brackets are high strength aluminum boom brackets, with a stainless steel bolt and nylon insert lock nut, designed for 2 in. booms. These boom brackets are designed to attach near the ends of a 2 in. boom. They allow for the attachment of truss support cables from these brackets to the truss bracket, to support a long boom Yagi beam antenna.
( 4 )
$14.99
Firestik Antenna Company SS-3M Mounting Springs
Firestik Antenna Company Mounting Springs help to protect your antenna, mount and vehicle from low hanging obstructions. Manufactured from long lasting, electro-polished stainless steel, and the upper and lower inserts are made of chrome plated brass and have standard 3/8-24 threads to fit all Firestik antennas, mounts and accessories. The medium duty model works well with antennas that are two to three feet in length. This spring will only add 3 additional inches of length to the antenna.
Not Yet Reviewed
$14.99
DX Engineering Secure Mount Bolt Kits
DX Engineering Secure Mount Bolt Kits are special stainless steel hex bolts with a coating on the threads that keeps them in place! Available in either 1/4-20 or 5/16-18, these bolt kits are provided to fit to popular HAM series and Tailtwister rotators, used by hams around the world. Perfect for use on new installations and as replacements, these "patch bolts" stay where they are placed and will not back out under vibration, which can be a problem with standard bolts. Depending upon model, Secure Mount Bolt Kits include five or six sets stainless steel bolts, flat washers and split washers. Secure your rotator with DX Engineering Secure Mount Bolt Kits.
Not Yet Reviewed
$11.99
—
$15.99
DX Engineering Replacement Tilt Base Hardware Kits
DX Engineering Replacement Tilt Base Hardware Kits are genuine replacement hardware kits for the tilt base antennas. They consist of all of the nuts, bolts, fender nuts, and flat and lockwashers needed to replace missing or damaged pieces. They do not include hardware for saddle clamps.
( 2 )
$13.49
—
$15.49
COMTEK Vertical Feedpoint Connection Kits
If you are planning to build your own aluminum vertical four-square or 2-element phased arrays, COMTEK Vertical Feedpoint Connection Kits are what you have been looking for. These feedpoint assemblies ease the task of attaching a coaxial cable to your aluminum tubing. Silver SO-239s and stainless steel hardware ensure long life and reliability. Available individually or as a set of four, COMTEK Vertical Feedpoint Connection Kits from DX Engineering give you a great start to your project.
( 1 )
$19.99
West Mountain Radio TARGETuner Controller Mobile Mounting Brackets
West Mountain Radio TARGETuner Controller Mobile Mounting Brackets provide a convenient method of mounting the TARGETuner controller to many surfaces. They use existing TARGETuner case screws for mounting to their associated controller. Surface mounting will require four screws, not included. Recommended size is Number 6 Screw, 3/8 in. long. Order your West Mountain Radio TARGETuner Metal Mounting Brackets from DX Engineering to permanently mount your TARGETuner controller.
Not Yet Reviewed
$12.95