Availability
HF Beam Antennas
Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles
Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles provide coverage of one specific HF band. Built as a full-size resonant dipole, Diex aluminum tubing antennas provide excellent performance and are handled with a lighter tower and smaller rotator, offering a very economical alternative to the expense of a Yagi. Crafted with precision in Brazil using quality materials, they are designed to withstand tough environments assuring long-lasting service. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these single-band HF antennas provide very good directionality depending upon installed height above ground. They feature the flexibility of physical adjustments to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles power handling is 1,500W+ PEP, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 6 )
$115.99
—
$209.99
DX Engineering XB-5 Hexx Beam Spreader and Center Post Kit
The DX Engineering XB-5 Hexx Beam Spreader and Center Post Kit is a component of the XB-5 Hexx Beam that contains parts for the antenna assembly. The Spreaders and Center Post are manufactured from high quality fiberglass material and all the parts are used as-is and no cutting or drilling is required. This helps to reduce the risk of stray fibers becoming a problem during assembly. This DXE-XB-5-SCP kit includes: - Pre-assembled Spreader Support "Ice" Ropes terminated with thimbles - Stainless Steel Carabiners for easy assembly - Pre-cut Fiberglass Spreader Sections of the appropriate lengths and diameters - Pre-cut Fiberglass Center Post - Element Clamps to serve as stops for the spreader sections and Guy Ring - Vinyl Cap - Guy Rings - only the 1-1/4 in. ID is used on the Hexx Beam Center Post (four other sizes may be retained for use as desired) - Spreader End Padded P-clamps Refer to the DX Engineering XB-5 Hexx Beam HF Antenna manual for more information.
Not Yet Reviewed
$209.99
DX Engineering XB-5 Hexx Beam Hexx Hub
The patented* DX Engineering XB-5 Hexx Beam Hexx Hub provides a strong, solid base for the entire XB-5 Hexx Beam antenna. Made from cast aluminum and machined to perfection, the Hexx Hub is far superior to available base plate designs. The Hexx Hub has integral V-Saddles and with the included Stainless Steel V-Bolt hardware firmly attaches Hexx Beam fiberglass spreaders in proper alignment without drilling or crushing. The upper and lower mast mounts are integrally cast into the hub, eliminating the need to find separate mounting flanges, reducing assembly time, improving mast alignment and providing a far stronger heavy duty attachment for the mast. Kits include: * Cast aluminum Hexx Hub * Twelve 1 1/2 in. short stainless steel V-bolts * Twelve 1/4-20 in. stainless steel hardware kit for V-bolts * Six 1/4-20 in. stainless steel hex head bolts * Six 1/4-20 in. stainless steel hex nuts * Six 1/4-20 in. stainless steel flat washers * Six 1/4-20 in. stainless steel split washers Use DX Engineering XB-5 Hexx Beam Hexx Hubs as replacement parts, for upgrading other kits or for home brew projects. *US Patent # D 605,184
( 1 )
$102.99
DX Engineering XB-5 Hexx Beam 5-Band Rigid Feeder System
The patented* DX Engineering XB-5 Hexx Beam 5-Band Rigid Feeder System, DXE-XB-5-FF, is specifically designed for the DX Engineering XB-5 Hexx Beam. A professionally engineered Stainless Steel and PTFE flat balanced feedline system, the Rigid Feeder eliminates vulnerable coaxial cable sections - providing a weatherproof, low-loss, high power balanced connection to all five bands - 20, 17, 15 12 and 10 meters. Used with the DX Engineering Maxi-Core 1:1 Balun, this balanced feeder solves the pattern-skewing problems created by the unbalanced coaxial post feeders used by others, for the optimal antenna pattern and maximum XB-5 Hexx Beam performance. This revolutionary Rigid Feeder attaches directly to the outside of the full-size 1-1/4" fiberglass Center Post of the DX Engineering XB-5 Hexx Beam. There is no drilling for attachments that would weaken the Center Post. The integral wire element center insulators with the unique serpentine wire grip and strain relief assure long, reliable performance. Rated to handle more power than the legal limit, the DXE-XB-5-FF Rigid Feeder is pre-assembled and tested and is also ideal for retrofitting to other hex beams. Intended for use the DX Engineering XB-5 Hexx Beam Wire Element Kit, DXE-XB-5-EK. *US Patent No. 8, 669,911, US Patent No. D 624,060; British Patent Number GB248003B
Not Yet Reviewed
$192.99
Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles
Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of two non-adjacent HF bands that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique two-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Two-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 7 )
$215.99
—
$239.99
DX Engineering XB-5 Hexx Beam Mast Mount Kit
The all-new DX Engineering XB-5 Hexx Beam Mast Mount Kit, DXE-XB-5-MMK, is a component of the DXE-XB-5 Hexx Beam, used in the initial assembly and final mounting of the antenna onto a user supplied mast of 1.25 to 2.00 in. OD. The DXE-XB-5-MMK Mast Mount includes: - One Center Post Aluminum Mounting Tube, 1.50 in. OD for the XB-5 Hexx Beam - One Element Clamp for use on the Center Post during assembly. - One Mast Mount Plate, Heavy-Duty, 1/4 inch formed aluminum 16 x 5.125 in. with inline clamp holes - Two DXE-SAD-150A U-Bolt Saddle Clamps for the Hexx Beam Mounting Tube - Two DXE-CAVS-2P V-Bolt Saddle Clamps for the user supplied 1.25 to 2.00 in. OD mast. Additional lower holes accommodate two optional DXE-SAD-300B U-Bolt Saddle Clamps for only a 3.00 in. OD mast, or two DXE-CAVS-3P for a 2.00 to 3.00 in. OD mast, or two DXE-SSVC-3P Clamps for a 2.375 to 3.000 in OD steel mast ++++++++++++++++++++++++++++++++++++++++++++++++++++++ This DXE-XB-5-MMK Mast Mount Kit may also be used with the supplied Saddle Clamps to create a short extension at the top of a 1.25 to 2 in. OD mast with an optional 1.50 in. OD only tubing to mount a small VHF or UHF beam or vertical. This kit cannot be added to the top of any Hexx Beam. +++++++++++++++++++++++++++++++++++++++++++++++++++++ This aluminum plate is available separately as DXE-MTMP, to mount a 1.25 in. OD short upper mast. The two upper holes on this plate accommodate Stainless Steel V-Bolt Saddle Clamps model DXE-SSVC-150P for an upper mast mounting a range of 1.00 to 1.50 in. OD steel. The lower inner holes will accommodate two DXE-SSVC-2P Stainless Steel V-Bolt Saddle Clamps for a 1.00 to 2.00 in. OD steel mast, or the lower outer holes accept two DXE-SSVC-3P Stainless Steel V-Bolt Saddle Clamps for a 2.375 to 3.000 in OD steel mast. All applicable Saddle Clamps are sold individually, only at DX Engineering. Off-brand clamps will not fit this plate.
Not Yet Reviewed
$119.99
DX Engineering PRO-STACK 2 Control Consoles
DX Engineering PRO-STACK 2 Control Consoles are designed for use with DX Engineering PS-2 and PS-2B switches. They require 12 Vdc well-filtered at 2 amps (fused) minimum.
( 1 )
$195.99
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of a single HF band that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique single-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes for the 20, 30 and 60M models, 1000W PEP for 80M and 1500W PEP for 40M, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 7 )
$215.99
—
$240.99
DX Engineering PRO-STACK 3 Control Consoles
DX Engineering PRO-STACK Three Antenna Control Consoles, model DXE-EC-PS3, are custom made twelve-position rotary switch controls for manual operation of PRO-STACK Broadband Three Antenna Phasing Relay Units, models DXE-PS-3B and DXE-PS-3BDIN. DXE-EC-PS3 Control Consoles offer the following features: * Stainless Steel Housing * Non-Skid feet * On-Off toggle switch * Green LED power on indicator * Filter capacitors on each control line * Internal automatic resettable fuse * Includes a 2.1mm power plug for +12 V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DXE-EC-PS3 Control Consoles connect to the PRO-STACK Relay Units with 9-conductor control cable, or with 8-conductor cable plus ground using the coaxial cable shield as the ground return. These consoles were designed for the PS-3B series, but may be used for other applications which require a special BCD controller. See the EC-PS3 manual linked in the "Documentation" tab for detail on connections and the BCD truth table.
Not Yet Reviewed
$205.99
Clearance
Open Box
Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles
Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 2 )
$295.99
$236.79