HF Beam Antennas Antennas - in-line KEYWORD - Free Shipping on Most Orders Over $99 at DX Engineering

Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles

Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles provide coverage of one specific HF band. Built as a full-size resonant dipole, Diex aluminum tubing antennas provide excellent performance and are handled with a lighter tower and smaller rotator, offering a very economical alternative to the expense of a Yagi. Crafted with precision in Brazil using quality materials, they are designed to withstand tough environments assuring long-lasting service. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these single-band HF antennas provide very good directionality depending upon installed height above ground. They feature the flexibility of physical adjustments to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles power handling is 1,500W+ PEP, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.

5.0 out of 5 stars ( 6 )

$115.99

—

$209.99

Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles

Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of two non-adjacent HF bands that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique two-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Two-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.

4.43 out of 5 stars ( 7 )

$215.99

—

$239.99

Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles

Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of a single HF band that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique single-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes for the 20, 30 and 60M models, 1000W PEP for 80M and 1500W PEP for 40M, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.

4.57 out of 5 stars ( 7 )

$215.99

—

$240.99

DX Engineering PRO-STACK 3 Control Consoles

DX Engineering PRO-STACK Three Antenna Control Consoles, model DXE-EC-PS3, are custom made twelve-position rotary switch controls for manual operation of PRO-STACK Broadband Three Antenna Phasing Relay Units, models DXE-PS-3B and DXE-PS-3BDIN. DXE-EC-PS3 Control Consoles offer the following features: * Stainless Steel Housing * Non-Skid feet * On-Off toggle switch * Green LED power on indicator * Filter capacitors on each control line * Internal automatic resettable fuse * Includes a 2.1mm power plug for +12 V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DXE-EC-PS3 Control Consoles connect to the PRO-STACK Relay Units with 9-conductor control cable, or with 8-conductor cable plus ground using the coaxial cable shield as the ground return. These consoles were designed for the PS-3B series, but may be used for other applications which require a special BCD controller. See the EC-PS3 manual linked in the "Documentation" tab for detail on connections and the BCD truth table.

Not Yet Reviewed

$205.99

Clearance

Open Box

Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles

Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.

4.0 out of 5 stars ( 2 )

$295.99

$236.79

DX Engineering XB-5 Hexx Beam Mast Mount Kit

The all-new DX Engineering XB-5 Hexx Beam Mast Mount Kit, DXE-XB-5-MMK, is a component of the DXE-XB-5 Hexx Beam, used in the initial assembly and final mounting of the antenna onto a user supplied mast of 1.25 to 2.00 in. OD. The DXE-XB-5-MMK Mast Mount includes: - One Center Post Aluminum Mounting Tube, 1.50 in. OD for the XB-5 Hexx Beam - One Element Clamp for use on the Center Post during assembly. - One Mast Mount Plate, Heavy-Duty, 1/4 inch formed aluminum 16 x 5.125 in. with inline clamp holes - Two DXE-SAD-150A U-Bolt Saddle Clamps for the Hexx Beam Mounting Tube - Two DXE-CAVS-2P V-Bolt Saddle Clamps for the user supplied 1.25 to 2.00 in. OD mast. Additional lower holes accommodate two optional DXE-SAD-300B U-Bolt Saddle Clamps for only a 3.00 in. OD mast, or two DXE-CAVS-3P for a 2.00 to 3.00 in. OD mast, or two DXE-SSVC-3P Clamps for a 2.375 to 3.000 in OD steel mast ++++++++++++++++++++++++++++++++++++++++++++++++++++++ This DXE-XB-5-MMK Mast Mount Kit may also be used with the supplied Saddle Clamps to create a short extension at the top of a 1.25 to 2 in. OD mast with an optional 1.50 in. OD only tubing to mount a small VHF or UHF beam or vertical. This kit cannot be added to the top of any Hexx Beam. +++++++++++++++++++++++++++++++++++++++++++++++++++++ This aluminum plate is available separately as DXE-MTMP, to mount a 1.25 in. OD short upper mast. The two upper holes on this plate accommodate Stainless Steel V-Bolt Saddle Clamps model DXE-SSVC-150P for an upper mast mounting a range of 1.00 to 1.50 in. OD steel. The lower inner holes will accommodate two DXE-SSVC-2P Stainless Steel V-Bolt Saddle Clamps for a 1.00 to 2.00 in. OD steel mast, or the lower outer holes accept two DXE-SSVC-3P Stainless Steel V-Bolt Saddle Clamps for a 2.375 to 3.000 in OD steel mast. All applicable Saddle Clamps are sold individually, only at DX Engineering. Off-brand clamps will not fit this plate.