Availability
HF Stealth and Portable Antennas
Spooltenna Parks-EFHW4010 End Fed Half Wave Portable Wire Antennas
Spooltenna Parks-EFHW4010 End Fed Half Wave Portable Wire Antennas are compact, lightweight antennas specifically designed for portable amateur radio operations like POTA SOTA, and Field Day. Its innovative spool form factor is intended to ensure rapid deployment and teardown, providing a frustration-free operating experience that doesn't compromise performance.
( 10 )
$149.00
Spooltenna ULTRA-4010 End Fed Half Wave Portable Wire Antennas
Spooltenna ULTRA-4010 End Fed Half Wave Portable Wire Antennas are a 40-10M end fed half wave antenna in an ultra-compact form that is small enough to fit right into your pocket. Optimized for size and weight without compromising performance, it is ideal for POTA, SOTA, backpacking, and travel. No antenna tuner is required.
( 4 )
$169.00
Alpha Antenna HOA Buster Antenna Matching Units
The Alpha Antenna HOA Buster Matching Unit is an innovative solution for operators seeking a stealthy, tuner-free antenna system in restrictive environments. Designed to transform existing gutters and downspouts into efficient radiators, the HOA Buster covers HF, VHF, UHF, GMRS, and CB frequencies, including 80–10 meters, 2 meters, 70cm, and 900MHz. (gutter and environment dependent). The HOA Buster features an SO-239 RF connector and is rated for up to 250 watts PEP SSB, 125 watts CW, and 25 watts for digital, AM, or FM modes. When connected to conductive metal gutters, downspouts, and a real ground via the included ground spike, the HOA Buster delivers full-band coverage from 80–10 meters. For deployments where gutters or ground connections are unavailable, an optional 60-foot end-fed HF element enables portable operation in locations such as beaches, mountains, or parks.
( 5 )
$249.00
Chameleon Antenna FSR Faraday Strip Radial System
The Chameleon Antenna FSR Faraday Strip Radial System gives field operators a compact, MPAS READY radial and counterpoise solution that boosts efficiency, improves safety, and packs easily into any portable setup. At only 3 pounds and stored as two 6x4-inch bundles, the FSR offers significant performance improvements over traditional wire radials without adding bulk or complexity. Each Faraday Strip is built from a multi layer composite structure that pairs a Copper–Nickel–Polyester conductive fabric core—woven in a multidirectional diamond pattern—with durable TAN 900D Oxford outer layers for UV, moisture, and abrasion resistance. Three brass grommets on every strip maintain strong mounting points and consistent electrical continuity across the system.
( 6 )
$130.00
Chameleon Antenna CHA-Blank Antenna Mount Adapters
Chameleon Antenna CHA-Blank Antenna Mount Adapters support the CHA-SS58, CHA-SS17, and CHA-SS25 whips, allowing users to select the best configuration for their needs. Whether you need a compact setup or an extended-range solution, these adapters provide flexibility for various HF band applications. The modular design lets operators customize their antenna system based on specific mission requirements and operational conditions.
( 13 )
$132.00
Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper
Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper is an eight-band HF antenna for use on the 80 - 10 meter Amateur Radio bands without the need for a tuner and 60 meters is possible with the help of an antenna tuner. Near-Vertical Incident Skywave (NVIS) communication is possible, but dependent on the configuration of the antenna when installed. The CHA LEFS 8010 is designed for the trail and its minimalistic design and lightweight components make this antenna ideal for backpackers, hikers, bikers, campers, and survival communication. The sturdy line winder with integral high-efficiency impedance matching transformer, ultra-thin 20 gauge PTFE Kevlar antenna wire and lightweight Micro 90 paracord enables extremely portable eight-band operation without the extra bulk of an antenna tuner. Leave the antenna tuner at home, just bring a radio and a pair of boots! Order a Chameleon Antenna Lightweight 8010 End Fed Halfwave Sloper for your next expedition from DX Engineering today! -Includes- 1 - CHA LEFS – 63 ft. Tinned Copper KEVLAR PTFE (Teflon) wire. 1 - CHA LEFS – 67 ft. Tinned Copper KEVLAR PTFE (Teflon) wire) (-70°C to 150°C) 1 – 50 ft. MICRO 90 Paracord 1 – Wire Winder Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Lightweight 8010 End Fed Halfwave Sloper Additional Features and Specifications: -Frequency Range- 80M - 3.500 – 4.000 MHz 40M - 7.00 - 7.300 MHz 30M - 10.100 – 10.150 20M - 14.100 - 14.350 MHz 17M - 18.068 - 18.168 MHz 15M - 21.000 – 21.450 MHz 12M - 24.890 – 24.990 MHz 10M - 28.000 – 29.700 MHz * SWR: Typically, less than 2.0:1 (Frequency Ranges Listed Above) * Power: 500W SSB, 250W CW, 150W Digital * RF Connector: UHF SO-239 * Length: 63 ft / 130 ft with Extension * Operating Temperature -94° – 302° (-70°C to 150°C) * Weight: 1.5 lbs.
( 2 )
$225.00
Chelegance JPC-12 Portable HF Vertical Antenna
Chelegance JPC-12 Portable HF Vertical Antenna features a very handy set of parts that assemble quickly, to cover 40 through 6 meters. This set includes a special antenna base with SO-239, ground stake, counterpoise wire set, a manual tuning multi-band coil, heavy-duty aluminum tubes with threaded studs, and a stainless telescopic whip. This vertical kit comes packed into the provided 14.5 x 9.0 in. carry bag but extends up to over 13 ft. overall. With a manually tuned center-mount coil and whip adjustments, this antenna offers very good performance from 7 MHz and up. It handles up to 100 watts and is quickly assembled to connect with a user supplied coax, for temporary portable use, on the go! Chelegance JPC-12 Portable HF Vertical Antenna parts list: * 1 x Antenna base with SO-239 * 1 x Ground rod stake * 4 x Aluminum tubes, 0.75 x 12.6 in. (19 x 320 mm) * 1 x Multi-band coil * 1 x Telescopic whips 98.4 in. (2.5 m) (M10 x 1.5mm Thread) * 1 x Counterpoise radial wire set * 1 x Antenna bag 14.5 x 9.0 in. (37 x 23 cm) * 1 x User manual
( 17 )
$241.99
Chameleon Antenna EMCOMM-III-B HF Base Antenna
Chameleon Antenna EMCOMM-III-B HF Base Antenna is an effective multi-band High Frequency (HF) antenna specially designed for short to long range base station HF communications. Due to configuration and installation flexibility and low-visibility design, it is ideal for home use even in developments with a Home Owners Association (HOA) and Covenants, Conditions, and Restrictions (CCRs). It is also highly suitable for military, government agencies, non-governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and shortwave listening. The EMCOMM III Base antenna is configurable to facilitate both long distance (DX) and Near-Vertical Incident Sky wave (NVIS) communication and using an automatic antenna tuner or coupler with memory settings will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. SWR: Subject to frequency and configuration, but typically less than 2.7:1. An antenna tuner or coupler may be required depending upon frequency and configuration. The EMCOMM III Base antenna can be installed by the operator in less than 30 minutes. It should be installed as high and straight as possible, but almost any available supports, such as an existing antenna tower, trees, a flag pole, the eaves of a house, or a non-conductive fence can be used with satisfactory results. The EMCOMM III Base antenna is comprised of a matching transformer and a 130 foot antenna wire on a line winder - making an effective HF base station antenna system for permanent installation as a primary or backup HF base station antenna. Specifications: * Frequency: 80M - 10M * Power: 200 watt SSB or 100W CW/Digital * Length: 130 ft. Copper Clad Kevlar® PTFE (-70 degrees C to 150 degrees C) wire * Weight: 2.2 Lb. The antenna system consists of: * 1 X CHA EMCOMM III matching box * 1 X 130 ft. Copper Clad Kevlar® Wire
( 14 )
$195.00
Moonraker Multi-Band End-Fed Long Wire Antennas
Moonraker Multi-Band End-Fed Long Wire Antennas come complete with a 9:1 Unun, and they are available in 3 different versions. Models ranging from 32.8 ft. to 137.8 ft. in length covering frequencies ranging from 1.8 to 50 MHz. Typically, a perfect match can be obtained when these antennas used with an external tuner. Additionally, a ground lug and wire terminal is included for an earth ground on all 3 models.
( 6 )
$142.99
—
$190.99
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions
Chameleon Antenna CHA SINGLE-EXT Antenna Extensions enhance the range and versatility of antennas like the CHA-BV and other MPAS configurations. They improve resonance and efficiency across various HF bands, making them ideal for portable and field use.
( 1 )
$116.00
CHAMELEON ANTENNA CHA MIL EXT 2.0 Portable Whip Antenna Extensions
The CHAMELEON ANTENNA CHA MIL EXT 2.0 Portable Whip Antenna Extension has been designed to offer maximum portability and extended frequency range performance for use with the CHA MIL 2.0 whip for a portable or backpack antenna system. This collapsible antenna extension must be used with the CHA MIL 2.0 in order to create a 18 ft. 2 in. long portable antenna. When combined with any HYBRID series antenna bases (like the CHA HYBRID-MICRO from the CHA MPAS 2.0) the CHA MIL EXT 2.0 will operate at all frequencies from 1.8-54 MHz. These four 28 in. sections of 0.75 in. diameter of aluminum alloy tubing are designed for portable HF communication where rapid deployment and simplicity of operation is essential but compactness is primordial. The CHA MIL EXT 2.0 whip is an EXCELLENT add-on for the CHA MIL 2.0, which has aluminum tubing walls that are thicker and stiffer than the version 1.0. Also, the joint inserts and the main tubing are made of a single piece thus reducing losses. CHA MIL EXT 2.0 Specifications: * Frequency: Adds 160 to 12 Meter coverage when used w/CHA-MIL 2.0 Whip Antenna * Power handling: 1,500W SSB * Extension connection: 3/8-in.-24 threads stud/socket * Length Collapsed: 28.1 in. * Length Extended: 105.5 in. * Requires external wide-range antenna tuner BEFORE PERMANENT INSTALLATION IT IS IMPORTANT TO WATERPROOF THE UNIT. The use of anti-oxidant compound on all whip joints will also improve the efficiency of aluminum conductor connections.
( 9 )
$185.00
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper is a four-band HF antenna for use on the 40-10 meter Amateur Radio bands without the need for a tuner and 30, 17, and 12 meters is possible with the help of a tuner. Near-Vertical Incident Skywave (NVIS) communication is possible, but dependent on the configuration of the antenna when installed. The CHA-LEFS-4010 is designed for the trail and its minimalistic design and lightweight components make this antenna ideal for backpackers, hikers, bikers, campers, and survival communication. The built-in line winder with its integral high-efficiency 49:1 impedance matching transformer and ultra-thin 20 AWG PTFE antenna wire enables extremely portable four-band operation without the extra bulk of an antenna tuner. With the addition of user supplied antenna wires that have been cut to length for the desired band of operation, two insulators and support rope, this CHA-LEFS-4010 antenna can be converted to a standard or inverted V dipole antenna. Elevate your portable operations with the exceptional performance and convenience of the CHA-LEFS-4010. This antenna system is available in 2 configurations consisting of the following components: CHA-LEFS-4010 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch CHA-LEFS4010-316 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch - 1 X 25ft. RG-316 Coaxial Cable with RFI Choke
( 3 )
$175.00
—
$250.00
CHAMELEON ANTENNA Portable HF Antennas
CHAMELEON ANTENNA Portable HF Antennas are made with the finest materials available. They can be used for multiple purposes such as Base Station, Portable, Mobile, Marine, EMCOMM, MARS/CAP, ARES, SATERN, RACES, First Responders, Emergency Preparedness, SKYWARN, Military and Government communications and much more. CHAMELEON ANTENNA Portable HF Antennas are very effective antennas for deed-restricted lots and for rapid-deployment communication systems. Built to last, they survive very harsh conditions where other antennas fail. The wide bandwidth-capability of Chameleon Antennas provides reliable and efficient communications. Unlike other multiband antennas, they require no changing of switches, jumpers or coils. Their simple design and integrated impedance matching transformer doesn't require special assembly tools. Be sure to click the "More Detail…" link on our page for additional information on each antenna. Do you need a rapid-deployment HF antenna that's stealthy, economical, light weight and manageable by a single person? If so, give CHAMELEON ANTENNA Portable HF Antennas a look… then order yours from DX Engineering!
( 53 )
$160.00
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna is specially designed for short to long range portable and man-pack HF communications. The EMCOMM III Portable antenna is ideal for hiking, backpacking, and both tent and Recreational Vehicle (RV) camping. It is also highly suitable for military, government agencies, non- governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and amateur radio operators (hams) involved in field communication and disaster preparedness. The EMCOMM III Portable antenna is configurable to facilitate Near-Vertical Incident Sky wave (NVIS) communication and will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. An antenna tuner or coupler may be required for in some instances. The EMCOMM III Portable antenna can be deployed by the operator in the field in less than 15 minutes, using almost any available support, with no masts or guying required. The EMCOMM III-P Portable antenna is comprised of a matching transformer, a 73 foot antenna wire on a line winder, and a 25 foot counterpoise - making a highly portable and effective HF antenna system. CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna Specifications: - Frequency: 160M - 6M (dependent upon tuner) - Power: 100W SSB or 50W CW - Length: 73' + 25" Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire - Weight: 1.5 Lb. The EMCOMM-III-P Portable HF Antenna system consists of: 1 X CHA EMCOMM III matching box 1 X 73' Copper Clad KEVLAR Wire (Radiator) 1 X 25' Copper Clad KEVLAR Wire (Counterpoise)
( 12 )
$190.00
Chameleon Antenna Hybrid Mini BNC Portable Antenna Bases
Chameleon Antenna Hybrid Mini BNC Portable Antenna Bases feature a built-in 1:5 broadband matching transformer and a maximum power rating of 500W SSB, 100W CW, and 40W for high duty cycle digital modes. A 3/8-24in. threaded connector is included for mounting various antenna radiators, and a BNC female connector on the side for coaxial connection. The Hybrid Mini base also has a 3/8-24 in. stainless steel threaded bolt on the bottom.
Not Yet Reviewed
$250.00
CHAMELEON ANTENNA CHA HUB KIT
CHAMELEON ANTENNA CHA HUB KIT consists of the CHA HUB and wire used with the CHA TDL. The antenna system consists of: 1 X 25 ft. Copper Clad KEVLAR PTFE wire (-70°C to 150°C) 1 X TDL HUB
( 3 )
$122.00
Chameleon Antenna CHA Basic Limited Edition HF Antennas
Chameleon Antenna CHA Basic Limited Edition HF Antennas are high-quality entry-level antennas that are perfect for anyone looking to get into the amateur radio hobby without spending too much on their first antenna. The Basic Limited Edition antenna series represents the latest evolution in end-fed wire antennas, combining the best features of the renowned CHA EMCOMM II V2 and CHA EMCOMM III base/portable antenna models to provide unmatched performance for both DX and NVIS communication. The BASIC LIMITED EDITION antennas are designed for superior performance in a compact and versatile form factor. These antennas are perfect for Amateur Radio enthusiasts who demand high efficiency and reliability for emergency communications, portable operations, and everyday use.
( 7 )
$125.00
—
$135.00
Alpha Antenna SS34+ Telescopic Whip Antennas
Alpha Antenna SS34+ Telescopic Whip Antennas are a premium 304 stainless-steel telescopic antenna element engineered for durability and performance across the 40–2 meter bands. Extending to an impressive 34.5 feet, this whip is laser-engraved with the Alpha Antenna logo—ensuring authenticity and quality, not rebranded imports. When collapsed, the 17-section element measures just 29 inches for convenient transport and storage. Built to withstand winds up to 30 MPH, the SS34+ features a precision-milled male 3/8-24in. mounting stud for secure attachment, eliminating the weaknesses of crimped designs. Each unit includes a Guy Ring Adapter for added stability during deployment. The SS34 Telescopic Whip Antenna is ideal for creating 1/4, 1/2, and 5/8 wave antenna variations, and offers gain improvements up to 3dB over standard configurations. For optimal performance, deploy with proper guying and counterpoise, and adjust the telescopic length to achieve resonance across your desired frequency range.
Not Yet Reviewed
$149.00
REZ Antenna Systems Z-17 Carbon 17-foot HF Telescopic Whips
REZ Antenna Systems Z 17 Carbon 17 foot HF Telescopic Whips are an ultra-lightweight 17-foot carbon fiber telescoping whip engineered for portable HF operation where strength, weight, and packability matter most. Weighing just 7.55 ounces, its high-rigidity carbon fiber construction minimizes mast loading and whip deflection while delivering excellent radiating performance in vertical and dipole configurations. Collapsing to just 25.4 inches, the Z-17 Carbon packs easily into portable field kits while deploying in seconds to its full 17-foot operating length. Naturally resonant on 20 meters, it pairs seamlessly with REZ loading coils for expanded band coverage. When combined with the XFORM 4:1 matching unit, it becomes a highly effective multi-band vertical supporting 30 through 10 meters in a compact, efficient deployment footprint. Unlike traditional stainless telescoping whips, the Z-17 Carbon is designed to be operated fully extended. Multi-band coverage is achieved using matching units or loading coils rather than adjusting whip length. The Z-17 Carbon integrates directly with REZ Antenna ecosystem and includes a precision adapter for compatibility with standard 3/8-24in. antenna mounting systems, making it ideal for POTA activations, portable stations, and emergency communications.
Not Yet Reviewed
$160.00
Ciro Mazzoni STEALTH Cap
Ciro Mazzoni STEALTH Cap - A strong and stylish cover for the STEALTH Loop capacitor, for those installations that may be out in the rain. Although the STEALTH is intended to be a portable operation loop, many users are choosing the artful appearance and low visual impact of the STEALTH Loop for temporary and permanent installations. For those users, the STEALTH Cap was invented, to reduce the affect of rain or ice on the STEALTH Loop tuning and operation. A great gift idea for the STEALTH Loop owner!
( 1 )
$189.99
DX Engineering HF Portable TW Antennas and Accessories
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer and seller of TW Antennas! DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this line formerly known as Transworld. DX Engineering HF Portable TW Antennas and Accessories feature complete portable antenna packages and all of the individual components to build a custom stealthy system. Will you use these compact HF antennas as portables, fixed antennas, or both? Choose your own path to stealthy operations and to join in the fun of portable HF! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black finish that is excellent on fixed antennas in HOAs or where "CC & R" antenna restrictions preclude the installation of towers and easily visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the optional 41 in. long permanent mounting post, DXE-TW-PMP, and operate! Note: Although a permanently-installed mounting pier (DXE-TW-PMP) is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. For portable use, the lightweight foldable Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Quadrastand's gray fiberglass legs will give decades of rugged, dependable service. And since they're fiberglass, there's no chance of corrosion from contact with earth or sand. Think about equipping for your special operating event plans like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air) for backpacking and general camping with HF! A great Carry Case, DXE-TW-DXBAG, is available to make traveling with these antennas in your car or RV a snap. DX Engineering HF Portable TW Antennas and Accessories are available as mono-band or multi-band systems. Covering all five bands from 20 through 10 meters, DXE-TW-2010 Multi-Band Remote Switching Center Sections include a control console and cable and can be band-switched remotely in the shack and automatically by some transceivers. DXE-TW-2010L Multi-Band antennas can be band-switched manually. Plus, it's easy to change to the 80, 40 and 30 meter operations with DXE-TW-8080, DXE-TW-4040 or the DXE-TW-3030. Swap out each Band Box Center Post to change to operations on these different bands in a very simple manner. Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antennas available. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering HF Portable TW Antennas and Accessories are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 20 )
$169.99
—
$189.99
Comet HFJ-350 Series Portable Telescopic Antennas
Comet Antenna HFJ-350 Series are Multi-Band Portable Telescopic Antennas that bring new flexibility to portable operations. The combination of the base coil with five taps and a plug wire along with the 10-section telescopic whip top section provides a lightweight antenna that is easy to use. Make a quick manual change of the plug tap connection and whip length to tune any HF band. The antenna UHF base includes a side terminal for your counterpoise connection. A base coil section provides the additional band capability. Use on your UHF mount or adapter with a counterpoise wire and tuner for best results. Comet Antenna HFJ-350M specs: Frequency: 3.5 – 50 MHz (9 bands) Max. Power: 75 W PEP SSB on 3.5 MHz; 100 W SSB PEP 7.0 – 50 MHz Length: Min. 14.57 in. (370 mm), Max. 63.39 in. (1610 mm) Weight: Approx. 0.55 lbs. (245 g) Antenna Base Mount Type: UHF (PL-259 style) HFJ-350MTOYBX "Toy Box" Portable, 10 band telescoping HF Antenna 160/80/40/30/20/17/15/12/10/6M bands Max. Power: 75 W PEP SSB on 1.8 and 3.5 MHz; 100 W SSB PEP 7.0 – 50 MHz Min Length: 14.25 in. approx Max Length: 75. in. approx Weight: 0.89 lbs. Antenna Base Mount Type: UHF (PL-259 style) IMPORTANT NOTES: * These Antennas Should Not Be Used for Mobile Operation. * These Antennas Are Not Waterproof, Do Not Use in Wet Environments.
( 21 )
$149.95
Chameleon Antenna Hybrid Micro Matching Unit Bases
Chameleon Antenna Hybrid Micro Matching Unit Bases support a wide range of portable and semi permanent antenna configurations. They work seamlessly with numerous wires, whips, and compatible accessories, offering both a stable mounting platform and dependable impedance matching for many types of antenna systems. Each unit features an SO 239 connector on the side, a 3/8 24in. female antenna connection on the top, and a 3/8 24in. male counterpoise connection on the bottom. An integrated antenna shackle assembly, including a split ring, bolt, and nut, provides additional attachment flexibility for various deployment scenarios. When paired with the appropriate accessories, these bases support configurations such as horizontal NVIS, sloping wire, inverted L, manpack vertical, portable vertical, and portable dipole configurations. They also perform exceptionally well with the CHA MIL Whip, telescopic whips, mounts, and masts. Engineered for field reliability, the Hybrid-Micro bases carry a power rating of 100W SSB/CW and 25W for all other modes, making them ideal for operators seeking adaptable, durable solutions for portable HF operations.
Not Yet Reviewed
$225.00
Alpha Antennas HexTenna Antenna Replacement Hubs
Alpha Antennas HexTenna Antenna Replacement Hubs allow you to replace a damaged or worn out center hub of your HexTenna system. The HexTenna hub provides a 3/8x24 stud on the bottom for mounting, an SO-239 for coax connection, a lug for a counterpoise, and three locations for whip elements. This replacement will ensure that your HexTenna is ready to preform when you are.
Not Yet Reviewed
$199.00