Availability
24 Results Found For "in-line"
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$20.99
—
$49.99
Chelegance Guy Line Anchors
Chelegance Guy Line Anchor Rods are made from steel with a shaft diameter of 9mm, just under 3/8in. and they are 7.9 inches in length, with a built-in hook that makes tying off your guy ropes a breeze. Sold in packs of 4.
Not Yet Reviewed
$20.99
Chelegance Guy Line Rope
Chelegance Guy Line Rope provides the support necessary to keep your antenna standing tall! These guy line ropes are sold in 328ft. (100m) lengths and they are approximately 1/4 in. (6mm) in diameter. They are made from a polyester material with a breaking strength of 500lbs. (227kg).
Not Yet Reviewed
$39.99
DX Engineering Rotator Control Line Connectors
Available here, individually, are the "remarkable and elegant" 4-pin interlocking weather-sealed rotator control line connectors that have metal bodies to provide RF shielding, as supplied with the DXE-RT4500HD. These DX Engineering Rotator Control Line Connectors are top-of-the-line cable-mount solder connectors that are intended to be used outdoors, for a lifetime of reliable control line termination. Their positive latching, moisture-sealing, quick disconnect features make them ideal to build an extension, pigtail or test cable for your DXE-RT4500HD or controller. They are a perfect match for DX Engineering DXE-CW1812OR Heavy-Duty Spec Rotator Cable, with 5 conductors: 2 x 12 AWG and 2 x 18 AWG plus 1 x 18 AWG shield. Each gender are used to build your own rotator cable assembly extension. Just as with standard power extension cords, use female for the power source end and male for the mating end of the extension, so there is never an exposed pin with voltage present. In this case, use the DXE-LP-20-F female connector on any cable, controller pigtail or the rotator end of an extension that can have a voltage present. Use the DXE-LP-20-M male connector on the controller end of the mating extension cable. DXE-LP-20-F 4-pin female to make a controller pigtail or for the end of a cable assembly that mates with the male rotator pigtail. This connector is supplied with DXE-RT4500HD Heavy Duty Rotators DXE-LP-20-M 4-pin male as supplied on the permanently mounted DXE-RT4500HD Heavy Duty Rotator. Used for the controller end of an extension cable to mate with a controller pigtail. These are the best connectors, to make the best weather-sealed 4-conductor cable assembly, for the best rotator on the market, all from DX Engineering.
Not Yet Reviewed
$20.99
Mastrant Clamcleat® Guy Line Tensioning Reels
Mastrant Clamcleat® Guy Line Tensioning Reels are designed for quick and easy tensioning and releasing of guy lines on portable antennas and masts. These Tensioning Reels, featuring Clamcleat® technology are designed for 1/4 in. (6mm) diameter rope, and ensure your ropes are secure and stored.
Not Yet Reviewed
$29.99
DX Engineering Radial Wire Metal Anchor Pins
DX Engineering radial wire metal anchor pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your radials during lawn maintenance. They are manufactured from 11-gauge steel and are 6 in. long to help keep the cables buried properly.
( 39 )
$22.99
Hustler HF Mobile Antenna Masts
If you're serious about HF mobile operation, choose Hustler HF Mobile Antenna Masts. Hustler represents convenience and versatility for mobile HF operations. Hustler offers fixed and folding-style high-quality mobile masts made with heat treated double-wall aluminum, brass fitting with 3/8-24 stainless steel studs that fit your custom HF mobile antenna installation. Match Hustler masts with their expansive line of Standard or Super Resonators and components and you'll soon learn why Hustler is an industry leader in HF mobile antennas. Hustler's mid-top loading design for HF mobile antennas provides the highest efficiency and a stronger signal as compared to base loaded models, including "screwdriver" antennas. Hustler resonators are available for all Amateur bands from 80 through 10 meters, including WARC bands. MO-1 – 54 in. mast with fold-over at sedan roof line 15 in. above the base for hood, fender or trunk mount, natural finish MO-2 – 54 in. mast with fold-over at 27 in. above the base for bumper and hitch level mount, natural finish MO-3 – 54 in. mast with no fold-over, white vinyl covered, ideal for marine applications MO-4 – 22 in. short mast for truck top, white vinyl covered, including three longer stainless steel whips to allow each Hustler resonator used to properly tune. Hustler MO series masts are resonant on 50 MHz. Foldable models MO-1 and MO-2 have a shake-proof clutch sleeve. Add a resonator to make a "monoband" HF plus 6 meter antenna. Add a VP-1 Mobile Mast Multi-Band Adapter to create a mobile antenna with three HF bands… plus 6 meter! The choice of bands is yours and you can change bands by just changing resonators whenever you want, made especially easy with the QD-2 Quick Disconnect. NOTE: A Hustler SSM-2 Ball Mount or other heavy-duty 3/8-24 antenna mount is required. Add a RSS-2 Resonator Spring to protect it against low branches. These Hustler masts, resonators and accessories have been available since the 1960s. They were so well designed that they are still a great choice for HF mobile. Order Hustler HF Mobile Antenna Masts from DX Engineering and build the high-performance HF mobile antenna of your dreams!
( 20 )
$44.99
Synthetic Textile Industries Antenna Support Rope
Synthetic Textile Industries Antenna Support Rope is the premium double-braided Dacron/polyester rope that Amateurs and SWLs have been using for years! Available in several sizes and spool lengths, these superior antenna support ropes are not weakened by decay or mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the braided jacket also protects the cord from damage due to ultra-violet light. Order some Antenna Support Rope today, so you will have it on hand for your next antenna project! This rope is perfect for supporting your wire and vertical antennas, but support rope should NOT be used for tower guying. For your tower guying needs, check out our Tower Guy Lines in the Tower Department here at www.DXEngineering.com
( 95 )
$22.99
—
$31.99
Mastrant MA1 Universal Heavy Duty Mast Guying Clamps
Mastrant MA1 Universal Heavy-Duty Mast Guying Clamps accommodate a wide range of mast diameters and support both 3 and 4-directional guying configurations. A 4-direction kit can also be used for 3-direction configuration, providing maximum flexibility for installation. MA1 brackets are made from 5/32-inch thick 304 stainless steel and feature a drilled hole to insert a screw for securing the guying clamp to the mast. Another option is to utilize a rubber pad between the clamp and the mast made from weather and UV stabilized EPDM. It spreads the pressure on the larger surface of the mast, reducing slippage and moreover isolating the clamp from the mast. The guy line holes measure 5/8-inch (16mm) diameter and are compatible with shackles, chain couplers, and carabiners sized from 5/32-inch (4mm). They also accommodate thimbles from 1/8-inch (3mm) up to 3/8-inch (10mm).
( 1 )
$23.00
—
$33.00
Diamond Antenna Duplexers
Diamond Antenna Duplexers are just what you need when splitting HF, VHF, or UHF signals. These duplexers may be used for combining two transceivers into one coax feed line. They are ideal for connecting HF/VHF radios, such ICOM IC-706 and IC-7000 series, and Yaesu FT-857 series, with two antenna ports, to a single feedline multi-band antenna, like the Diamond V7A. Diamond Antenna Duplexers eliminate the need to use an antenna switch and are made with a high-quality aluminum case with a black finish.
( 24 )
$49.99
Mastrant MA2 Universal Mast Guying Clamps
Mastrant MA2 Universal Mast Guying Clamps accommodate a wide range of mast diameters and support both 3 and 4-directional guying configurations. A 4-direction kit can also be used for 3-direction configuration, providing maximum flexibility for installation. MA2 brackets are made from 3/32-inch thick 304 stainless steel and feature a drilled hole to insert a screw for securing the guying clamp to the mast. Another option is to utilize a rubber pad between the clamp and the mast made from weather and UV stabilized EPDM. It spreads the pressure on the larger surface of the mast, reducing slippage and moreover isolating the clamp from the mast. The guy line holes measure 1/8-inch diameter and are compatible with shackles, chain couplers, and carabiners sized from 5/32-inch (4mm). They also accommodate thimbles from 1/16-inch (2mm) up to 5/16-inch (8mm).
Not Yet Reviewed
$24.00
DX Engineering Portable VHF/UHF Antenna Mounts
Designed for rapid deployment in portable operations, the DXE-MOBILEPORT-U is the ideal solution for mounting VHF/UHF or GMRS vertical antennas in the field. Whether you're camping, participating in Field Day, supporting EmComm activities, or setting up a temporary station, this mounting plate simplifies antenna setup in challenging environments. The center hole is sized to fit over collapsible masts like the DXE Nomad fiberglass mast, providing a stable and secure base. Four outer holes serve dual purposes: they can anchor guy lines for mast stabilization and support soldered wires to create a ground plane—if your antenna requires one. However, for best performance and simplicity, a no-ground-plane-required antenna is recommended. Compact, lightweight, and versatile, the DX Engineering MOBILEPORT-U Portable VHF/UHF Antenna Mounts are a must-have for any portable antenna deployment kit. Important Note: This mounting plate is intended for use with fiberglass masts only. Carbon fiber masts are not recommended, as they may interfere with RF signals and cause SWR issues due to their conductive properties.
Not Yet Reviewed
$29.99
LDG Electronics RU-9:1 Unun
LDG Electronics RU-9:1 Unun was designed to allow easy interface of random length vertical and end fed antennas to the LDG line of Automatic Antenna Tuners. This 200 watt Unun also operates as a standalone, meaning that it does not necessarily require a tuner for use on a certain antenna. It may be used with many of your antenna projects where a 4:1 Unun is typically recommended. This model is small and easy to weatherproof for use in the elements. LDG RU-9:1 Unun specs: * Ratio: 9:1 * Frequency coverage: 1.8 to 30 MHz. * Power range: Up to 200 watts PEP * Enclosure dimensions (WHD): 2.5 x 5 x 1.25 in. * Weight: 6 oz.
( 99 )
$39.99
LDG Electronics 1:1 Current Baluns
LDG Electronics 1:1 Current Baluns were designed to allow for the easy interface of ladder line antennas and long wires with the LDG line of automatic antenna tuners. * Configuration: 1:1 Current Balun * Frequency Coverage: 1.8 to 30 MHz. * Power Range: 100W continuous or 200 watts PEP * Easy to weatherproof * Enclosure size: 5 x 2.5 x 1.25 in. * Weight: 6 oz. (including enclosure) These baluns operate "stand alone"; thus, they do not require an LDG tuner. They may be used with any of your longwire, random wire, or ladder line antenna projects. For low power operation it's hard to beat the value in LDG Electronics 1:1 Current Baluns from DX Engineering!
( 28 )
$39.99
DX Engineering TWIG Broadcast Interference Filter
Improve the performance of your QRP POTA or SOTA station with the DX Engineering DXE TWIG BCFIL Broadcast Interference (BCI) Filter. Engineered specifically for low power amateur radio applications, this compact module effectively attenuates strong AM broadcast band signals below the 80 meter amateur band. By suppressing these out of band signals, the filter helps lower your receiver's noise floor, resulting in cleaner, more reliable reception of weak amateur radio signals. The DXE TWIG BCFIL is equipped with BNC female connectors for quick, in line installation in the field. Ideal for portable, field, and low power fixed station use, it provides an effortless way to reduce unwanted broadcast interference without adding complexity to your station setup. Features: • Blocks strong AM broadcast band and 1.8 MHz signals below the 80 meter amateur band • Improves receiver noise floor and enhances reception of desired signals • Designed for low power transceivers • Compact in line module with BNC female connectors for easy installation • Ideal for portable POTA and SOTA, mobile, and fixed low power stations Power Rating: For QRP use only — maximum 20 watts PEP. Not suitable for high power transceivers.
Not Yet Reviewed
$49.99
LDG Electronics 4:1 Voltage Baluns
LDG Electronics 4:1 voltage baluns were designed to allow for the easy interface of ladder line antennas and long wires with the LDG line of automatic antenna tuners. * Configuration: 4:1 Voltage Balun * Frequency Coverage: 1.8 to 30 MHz * Power Range: 100 W continuous or 200 watts PEP * Easy to weatherproof * Enclosure size: 5 x 2.5 x 1.25 in. * Weight: 6 oz. (enclosure weight included) These baluns operate "stand alone"; thus, they do not require an LDG tuner. They may be used with any of your long, random, or ladder line or other antenna projects.
( 17 )
$39.99
DX Engineering Direct Coax Feed Add-On Kits
DX Engineering Direct Coax Feed Add-On Kits are designed for the Hustler BTV Series of antennas. They allow for a direct connection with a coaxial cable PL-259 (UHF male) connector. Manufactured from heavy-duty stainless steel, these add-on kits allow for a convenient connection from your coaxial cable feed line directly to the base of the Hustler BTV series vertical antennas by adding a mounted SO-239 (UHF female). They may be positioned in any one of three different directions to accommodate a straight-in or sideways connection from your feed line. If you are looking for a professional and reliable installation, then order a low power or high power (low loss) coaxial jumper cable for connecting your radial plate with a bulkhead connector. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Direct Coax Feed Add-On Kits include a laser-cut stainless steel bracket, high quality SO-239 with PTFE insulation, and stainless steel hardware. Order one for your BTV vertical!
( 79 )
$42.99
Alpha Delta Antenna Hardware Kits
Alpha Delta Antenna Hardware Kits contain one DELTA-C Center Insulator, antenna connection hardware, one model SEP arc-plug static electricity protector that is installed on the back of the DELTA-C, and two model DELTA-CIN End Insulators. These kits are a great way to build wire antennas! The antenna hardware is constructed using Alpha Delta's exclusive Model Delta-C Center Insulators and model CIN End Insulators. They're molded from Deltalloy, an extremely tough and durable plastic specifically blended to withstand sunlight and extreme weather conditions. An SO-239 connector is provided for a direct connection to the PL-259 on your coaxial cable. Or, a ladder-line balanced feedline may be connected directly to the dipole wire ends. If a balanced feedline is used with an antenna tuner in non-resonant applications, the SEP arc-plug must be removed to prevent the "false triggering" of the gas tube. The ALP-SEP arc-plug static electricity protector is a special gas tube component designed to bleed off slow-rising static electricity buildup generated by thunderstorms, high-wind driven snow, sand, or even a harmless looking cloudy day. These static charges have been measured to several thousand volts and can damage or destroy sensitive components in receivers' or transceivers' front-end circuitry. Note: When the "Documentation" tab is available, please look at the associated files for additional product information. For wire antenna kits with a little something extra, order Alpha Delta Antenna Hardware Kits from DX Engineering!
( 44 )
$42.99
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits are designed for building wire antennas for high-power operations. This model will mount to any DX Engineering Balun for a balanced and isolated wire antenna, or this insulator kit may be used directly with DX Engineering 300 Ohm Ladder Line for a non-resonant multi-band dipole. All EZ-BUILD® kits include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments! The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope. Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals and stainless steel hardware. For a wire antenna, built with a DX Engineering Balun at the feed-point, the coax feedline may be secured with the optional DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the balun connector to the strain of the coaxial cable's weight or movement. DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V-beam, or loop antennas. EZ-BUILD® UWA Center-T may be used as a strain relief for our 300-ohm ladder line at the ground end or house end of the run, or as the strain relief on the feed end of a vertical wire or long wire antenna. Since soldering is not necessary when building an antenna with this kit, it is perfect for Field Day use, portable operations, or even for the weekend experimenter. However, it is certainly the best choice for your permanent wire antenna system. This UWA-KIT is for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line. Use the EZ-BUILD® UWA213-KIT for the construction of an RG-213 or RG-8U coax fed wire antenna without a balun, that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels. DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits include: -- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes -- Two end insulators featuring the no-loop, no-solder, serpentine grip design -- Two stainless steel wire connection bolts, nuts, and washers. -- Six crimp ring terminals for antenna and ladder line wire connections -- Additional stainless steel hardware for mounting DX Engineering baluns DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are sold separately. Only your imagination is the limit to the practical applications for which this useful insulator system may be used. It is made from a very strong UV resistant poly-resin plastic that can handle the weight of huge wire antennas, and a DX Engineering balun as well as the attached coaxial cables. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. So, keeping an inexpensive EZ-BUILD® DXE-UWA-KIT on hand for your next wire antenna project is a great idea!
( 25 )
$30.49
Hi-Z® Antennas DL-3A Delay Cables
Hi-Z® Antennas DL-3A Delay Cables are an essential component of the Hi-Z Three Element V2 Triangular Array, required for installation of the a HIZ-PC-3A Phasing Combiner. Order one HIZ-DL-3AL Long Delay Cable for 40 ft. element spacing of the Hi-Z Three Element V2 Triangular Array. For arrays larger than 40 ft. element spacing, add one HIZ-DL-3AS Delay Cable Set, which includes three 3 ft. extension cables to provide adjustment capability for array size. Use all three for an array with 50 ft. element spacing. The 23 ft. DL-3AL is combined in-line with a single or multiple 3 ft. extensions from the DL-3AS. They connect in series to the PC-3A V2 Phasing Controller Delay Line ports. Signal delay with added cable segments allows the user to accommodate different size arrays, 40 through 50 ft. element spacing, or to manipulate the patterns to achieve changes in Receive Directivity Factor (RDF). See the Hi-Z Three Element V2 Triangular Array Phasing Combiner listing for additional information.
Not Yet Reviewed
$29.99
—
$35.99
United Microsystems BT-75/BOG Beverage-On-Ground Antenna Transformers
The United Microsystems BT-75/BOG Beverage-on-Ground (BOG) Antenna Transformers are specifically designed for Beverage-on-Ground receive antennas and is based on the proven BT-75 transformer used with elevated Beverage antennas. Because BOG antennas are installed directly on or just above the ground, they require no supports and can be significantly shorter than traditional Beverage antennas, making them a practical option where space is limited. BOG antennas typically exhibit lower impedance than elevated Beverage antennas. The BT-75/BOG is optimized to provide proper impedance matching between the antenna and 75-ohm RG-6 coaxial cable, improving performance compared to standard Beverage transformers. For correct operation, the far end of the antenna must be terminated with a 250 to 300-ohm resistive load. The United Microsystems RXT-270 termination resistor is recommended. Properly installed Beverage antennas are low-noise, receive-only antennas that provide excellent rejection of signals and noise from the undesired direction. Due to the lower velocity factor of radio waves near the ground, a BOG antenna can often deliver a radiation pattern similar to an elevated Beverage antenna of roughly twice the length, though with reduced signal strength. A BOG antenna as short as 150 to 200 feet can provide effective receive performance, although a preamplifier may be beneficial in some installations. The BT-75/BOG is designed for use with 75-ohm RG-6 coaxial cable. Originally developed for television applications, RG-6 offers low loss at VHF and UHF frequencies, resulting in extremely low loss on the 160, 80, and 40-meter bands. Its availability and low cost make it a popular choice for low-band receive antenna feed lines. The transformer is housed in a NEMA-rated enclosure with stainless steel hardware for long-term outdoor durability. A built-in gas discharge tube across the antenna terminals helps protect the transformer from nearby lightning-induced surges, although it will not provide protection against direct or very close lightning strikes.
Not Yet Reviewed
$37.95
DX Engineering RF PRO Loop Replacement Components
Since DX Engineering manufactures the RF-PRO-1B® Active Magnetic Loop Receive Antenna, we can offer these RF PRO Loop Replacement Components. Available for refurbishing Pixel, InLogis or DX Engineering Active Magnetic Loops, choose one or more of these individual "Original Equipment" components, component set or handy accessory pack that fills your needs. 1. DXE-RFPRO1B-PA Receive Preamplifier has this new part number for the preamp unit only. This is the weatherproof, metal-encased replacement RF PRO 1B Receive Preamplifier that mounts directly onto the loop bracket. Mounting hardware is not included with this replacement low-noise preamp, but it is available in the… 2. DXE-RFPRO1B-OAP Outdoor Accessory Pack. This package contains the insulated shoulder washers, flat washers and nuts to properly mount the preamp. Also included in this outdoor package for the loop installation are the mast mounting V-Bolts and Saddles and the short RG-6 F connector jumper to connect the loop to the preamp, and weather sealer. User supplied RG-6 coaxial cable is used for the long feedline that is run inside to the… 3. DXE-RFPRO1B-PI Power Inserter. This is the indoor unit that puts a well filtered and regulated 20 Vdc power onto the feedline for the preamp. It carries the loop RF to the receiver via the F connector. This unit also disables the power to the preamp when it is keyed by the transceiver amplifier keying line. The Power Inserter is run on 24 Vac from the… 4. DXE-PSW-24A-6AU AC Adapter. This clean power supply is a linear transformer that converts 120 Vac to the 24 Vac at 600 mA required by the Power Inserter. It is has the attached 2.1mm power connector. 5. DXE-RFPRO1B-IAP Indoor Accessory Pack contains the cables and adapter to connect the transceiver RF and keying lines to the Power Inserter. The F connector coaxial cable connects RF from the Inserter to the radio. A supplied F female to PL-259 adapter facilitates that connection, should you radio need it. An RCA phono patch cable is supplied for keying the Power Inserter and a RCA phono y-adapter provides the additional keying line connection for a power amplifier. 6. DXE-RF-30B Complete Component Package is for a system replacement where only an existing RF PRO 1B Loop is available. All of the above individual components, cables and hardware items listed above, items 1 through 5, but not the loop, are included in this DXE-RF-30B package. 7. DXE-PRO-LOOP is the Replacement RF PRO 1B Loop that is ordered by customers who have all other components of their system working. When your damaged or defective loop needs to be replaced, this is the loop only part to order. RF-PRO-1B® Loops may occasionally need a replacement component or hardware package. DX Engineering RF PRO Loop Replacement Components are available right here, at DX Engineering!
( 9 )
$21.99
—
$44.99
YCCC Receive Feedline Choke Kits
Closeout- Other YCCC array components are no longer available YCCC Receive Feedline Choke Kits prevent common-mode noise or unwanted signal intrusion on the feed lines of YCCC Receive Vertical Array Kits. These choke kits are the same as provided in the array kit packages and may be used as replacements or in other applications. Component-level assembly of these kits is required. A choke enclosure is user supplied. Their function is to provide isolation between the input and output coaxial shield connections, while passing desired receive or control signals. Their isolation impedance blocks common-mode noise or unwanted signals. YCCC Receive Feedline Choke Kits are supplied with standard "F" female connectors to prevent connection to transmitting equipment. All inquiries and technical support for the discontinued YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net
Not Yet Reviewed
$22.00
DX Engineering Receive Filter Plug-In Modules
DX Engineering Receive Filter Plug-In Modules provide frequency-specific receiving system enhancements, which fit into special DX Engineering devices listed below. These advanced plug-in filter modules are available separately to allow any user to create a specific or customized filter with low-pass, band-pass and high-pass frequency ranges. Filter cut-off and center frequencies correspond to the major Amateur bands, 160, 80, 40, 20, 15 and 10 meters, with filter module insertion loss of only about 1dB. By reducing or excluding frequency-specific interfering noise and signals, the noise floor can be lowered for the desired passband for dramatically improved reception DX Engineering Receive Filter Plug-In Modules may be installed in these devices: DXE-DMC-2 Dual Module Chassis accepts one or two filter modules to create a stand-alone passive inline filter unit of any configuration. One high pass and one low pas can be combined to create a multi-band bandpass filter of any HF range. DXE-RPA-2-PM Modular Receive Preamplifier accepts one Receive Filter Plug-In Module to customize the preamplifier passband. DXE-NCC-2 Receive Phasing Controller can accept one or two Receive Filter Plug-In Modules, one into each, Channel A and Channel B. The DX Engineering NCC-2 is highly regarded by many owners and engineers to be the best receive phasing and noise canceling unit available and is used extensively by enthusiasts in Amateur Radio DXing, Contesting, AM DXing, and Short-Wave Listening (SWL), and is also used in commercial AM and HF broadcast applications. DX Engineering Receive Filter Plug-In Modules add an extra dimension of functionality to the NCC-2, for advanced directional noise and signal nulling performance, enhanced with a specific frequency range operations. By default, NCC-2 internal option slots have bypass boards to pass all signals. Receive Filters placed into these slots dedicate the unit to filtered operation. Typically, one pair of band-pass or high-pass or low-pass filters, depending on desired filtering, is installed in the NCC-2 to suit the specific signal rejection needs of the discerning operator. As an example, an 80 meter DX enthusiast may elect to install two 80 meter band pass Receive Filter Plug-In Modules, part number DXE-R-BP80-PM, into their NCC-2 Channel A and Channel B middle slots. This dedicates their NCC-2 to 80 meter-only operations. This dramatically reduces noise and signals from outside the 80 meter band, very effectively excluding interference from nearby AM Broadcast, 160 and 40 meter stations. A much lower noise floor across 80 meters can help achieve reception of weak 80 meter DX signals. An additional pair of filters can be swapped out for a different band when desired. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. All Receive Filter Plug-In Modules displayed here are also conveniently listed on a single page linked in Documentation.
Not Yet Reviewed
$49.99