Availability
Antennas
DX Engineering RT4500HD Heavy-Duty Rotators
DX Engineering RT4500HD Heavy-Duty Rotator – The ultimate azimuth positioning rotator, purpose-built to work flawlessly for many years in a majority of tower mounted directional antenna systems. Every aspect of this rotator was designed for high-strength, ease of installation, serviceability and longevity. This rotator is extremely capable and worry-free for tower mast mounted directional antennas. The RT4500HD Heavy-Duty Rotator has capabilities that rival most rotators available on the Amateur Radio market. With an impressive list of features and benefits, it is noteworthy that this rotator does not have mechanical limit switches. Soft rotation limits are set in the optional controller to match the limits of the installed antenna cables. If the antenna or the mast ever slips, simply reset the controller to the new center of rotation and recalibrate the rotational range. Climbing or antenna mast repositioning is not immediately required. The part number DXE-RT4500HD is the stand-alone rotator unit only, which does not include a Top Mast Clamp. This allows for the selection of one of two different size Rotator Top HD Mast Clamps available, both also sold separately, that matches popular mast outside diameters (OD); DXE-RTMC-2 for 2-inch OD mast and DXE-RTMC-3 for 3-inch OD mast. Similar part numbers with added suffixes represent combinations that include the DX Engineering RT4500HD Heavy-Duty Rotator with either the 2-inch or the 3-inch Rotator Top HD Mast Clamp. Other part numbers include either the DXE-RT-21DXE Digital Rotator Controller or the microHAM ARCO Advanced Rotator Controller. Rotator control cables and cable assemblies are sold separately. Features and benefits of the extremely durable RT4500HD Heavy-Duty Rotator: • Superior Rotational Torque > 4,400 in. lbs. with high ratio worm gear drive powered by an extra heavy-duty 24VDC motor • Exceptional Braking Torque >18,500 in. lbs. by high ratio gear reduction that prevents rotation of the mast mounted antenna system due to wind • Very high Vertical Load Capacity — internal needle thrust bearing handles up to 2,000 lbs. • High-compression Heavy-Duty Top Mount Mast Clamps are available for 2-inch OD or 3-inch OD masts • Precision Movement — accuracy within +/-0.1 degrees with high resolution pulse counter • Easy Maintenance — access panel allows service of pulse counter switch without removing the rotator from the tower • Built for Longer Life — hardened steel gears welded onto shafts prevent slippage and shearing of key pins; larger main gear provides increased strength • Weather-Protected — sloped body sheds water; seals at the output shaft, the intermediate plate and the access panel keep moisture out; weep holes make sure it stays dry • Worry-Free Installation — standard four-bolt mount (same as Hy-Gain T2X/HAM); this triangular-shaped rotator fits inside ROHN 25G and Amerite 25 towers and on Accessory Shelves (rotor plates), including the DXE-AS25G and DXE-AS-455G. However, the RT4500HD easily handles antenna systems larger than the 25G will safely handle. Rohn 45G, 55G and up, Amerite 45 and 55, and many other high strength towers are recommended • Works with High-Quality Accessories — Optional DX Engineering DXE-RT-21DXE Digital Rotator Controller, or the microHAM ARCO Advanced Rotator Controller or other 24VDC Pulse Counting Programmable Controller. Install the rotator that provides the most accurate and dependable operations – the DX Engineering RT4500HD Heavy-Duty Rotator.
( 4 )
$2,469.99
—
$2,569.99
Ciro Mazzoni Automatic Magnetic Loop Antennas
Ciro Mazzoni Automatic Magnetic Loop Antennas are ideal stealth HOA and small-space loop antennas. They provide exciting new capabilities to limited space operations with unparalleled reliability and dramatically higher power handling compared to other transmitting loops. These are considered to be the best small transmitting loops available in the world! They are constructed with tough, attractive, aircraft grade aluminum. In spite of their compact size, these antennas automatically adjust to resonance throughout a wide band range: the MIDI Loop tunes 80 through 20 meters, the BABY tunes 40 through 10 meters... without any coverage gap! Now, THE STEALTH LOOP adds even more versatility for the Amateur who is shackled by antenna restrictions. Use it on the ground or on a table! Click on the STEALTH below for More Details! For each LOOP Antenna, MIDI, BABY and THE STEALTH LOOP, frequency information is directly transferred from your radio (ICOM, Elecraft, Kenwood, and Yaesu) to the included ATU 2.0 Controller, by RS-232 or Interface Cable. The Loop Antenna tunes automatically to the radio frequency or manual tuning is available with the ATU 2.0 USB Keypad, also included. If you need a very-high quality antenna that is concealable and operates at respectable power over a wide frequency range, then Ciro Mazzoni Automatic Magnetic Loop Antennas are a great choice!
( 50 )
$2,231.99
—
$2,479.99
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages conveniently combine DX Engineering's RT4500HD Rotator with a DXE-RTMC-2A Rotator Top HD Mast Clamp and your choice of either a DXE-RT-21DXE Digital Rotator Controller or microHAM ARCO Advanced Rotator Controller. * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$3,534.97
—
$4,209.97
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas, model DXE-7580FS-VA-3, are specifically designed for the 75/80 meter band. These DX Engineering 68 ft. vertical antennas are serious, FULL SIZE, full performance vertical antennas that will easily slip into any Amateur Radio station's arsenal, while delivering specs that would satisfy most commercial and military users. They are ultra-rugged, quarter-wave verticals that allow you to achieve the strongest possible presence at your power level and be competitive. Every design detail of the DXE-7580FS-VA-3 Heavy Duty Plus Verticals provide for a very stout 80 meter antenna that can stay up with no guying necessary and no worry. A massive 4 in. O.D. thick-wall 6061 aluminum tubing base and an extra-large insulating channel are combined with a patented* heavy duty stainless steel pivoting fixture that is second to none. Engineered for ease of assembly and adjustments, with corrosion-resistant aluminum tubing, stainless steel mounting brackets, and stainless steel hardware, these are very durable and attractive self-supporting antennas. If an extreme wind storm is predicted, one operator can easily lower and raise these antennas safely, due to the simplicity of the included Heavy Duty Pivoting Fixture and optional DXE-VRW-1 Manual Winch. DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas offer full band coverage, with a 2:1 SWR bandwidth of up to 593 kHz, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer. DX Engineering 80 Meter Full Size Quarter Wave Heavy Duty Plus Vertical Antennas feature: -- Self-supporting – will withstand steady-state winds in excess of 112 MPH without guying (guying required under extreme wind speed conditions) -- 5 kW SSB and CW rated—unparalleled reliability -- Ultra-rugged construction starts with 4 in. O.D. aircraft-grade heavy wall tubing -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings--high strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented stainless steel Pivoting Fixture, *U.S. Patent Number 8,130,168 -- High power handling and high strength, UV protected EXTREN® insulators -- No rust--100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. Note: For additional information, please look at the files under the "Documentation" tab. Designed to the highest of standards, DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas are simply the best 80 meter vertical antenna available today.
( 3 )
$2,959.97
OptiBeam HF Directional Antennas
OptiBeam antenna technology has achieved directional antennas with extraordinary electrical properties, including the highest efficiency, optimum band coverage, nearly constant gain and unchanging radiation pattern across the band, and low SWR. These antennas maintain consistent electrical characteristics under all weather-conditions and include a high power balun with UHF female connector for your 50 Ohm coaxial cable. OptiBeam Antennas are distinguished by their advanced mechanical qualities. Specially configured, stable and properly shaped element holders, robust square and round booms with effective and very solidly-built element transitions are OptiBeam exclusives. They provide advanced physical properties, including proper balance and the highest stability of the entire system. Elements are perfectly aligned and secured against torsion with minimal sag for a visually pleasing appearance. OptiBeam antennas are made for those who understand the true value of investing in proven electrical performance and unequalled mechanical quality for the ultimate in reliability. They are built to withstand the harshest conditions using the very best materials, including high quality aluminum alloys, UV stable synthetic parts and stainless steel hardware. OptiBeam antennas are designed to be easier to build than others, arriving in subassemblies with every part carefully sorted, clearly labeled, and extremely well packed for worry-free shipment and straightforward installation. In 2025, the OptiBeam brand of products was exclusively acquired by WiMo Antennen und Elektronik GmbH. The OptiBeam portfolio is now produced by WiMo and integrated into its product offering. With this acquisition, WiMo will integrate the technical expertise and know-how gained from OptiBeam's many years of experience in antenna technology and will provide new impetus with its extensive service and sales network. The primary goal is to successfully continue OptiBeam's antennas, ensure long-term customer service and spare parts availability, and leverage development potential. For enthusiastic operators of all pursuits, OptiBeam provides the advantage of pure performance. Proven in the field and confirmed by the most demanding hams around the world – choose OptiBeam for your station.
( 5 )
$2,429.99
—
$3,575.99
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas are in Bushcomm's flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional and commercial users. BBA-1KD 80 through 10 meter dipoles are significantly more compact than their 160 meter counterparts. Bushcomm BBA Series antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KD specifications: * Frequency Range 3.5 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 * Gain (height dependent) 5dBi (typical) -4dBi at 3.5MHz (height dependent) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * 1kW digital ready * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Antenna Weight: approximately 11.0 lbs. * Antenna Length: 85.58 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 95 ft. horizontal tower spacing; 65.6 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For a broadband 80-10 meter dipole, remember these Bushcomm BBA-1KD Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
( 1 )
$2,089.99
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas are in their flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KDE specifications: * Frequency Range 1.6 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 (with 30m RG-213) * Gain (height dependent) 5dBi (typical) -5dBi at 1.8MHz (typical, 130 ft. height) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping 57 x 15.7 x 8.7 in., approximately 35 lbs. * Antenna Length 177 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 183 ft. horizontal tower spacing; 131 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For an ultimate broadband dipole, remember these Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
Not Yet Reviewed
$2,610.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 4 )
$2,097.99
DX Engineering RT4500HD Rotator and Rotator Top HD Mast Clamp Packages
The DX Engineering RT4500HD Rotator and Rotator Top HD Mast Clamp Packages conveniently combine DX Engineering's RT4500HD Rotator, plus a DXE-RTMC-2 or DXE-RTMC-3 Rotator Top HD Mast Clamp. -DXE-RTMC-2 is a 2 inch OD HD Mast Clamp and is also a heavy-duty replacement for M2 Antennas OR2800 Positioners and Yaesu G2800-DXA, G1000-DXA, and G800-DXA Rotators. -DXE-RTMC-3 is the 3 inch OD HD Mast Clamp version that fits only the DXE-RT4500HD and M2 OR2800. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$2,819.98
—
$2,909.98
DX Engineering Skyhawk Tri-Band Yagi Antennas
DX Engineering Skyhawk™ Tri-Band Yagi Antennas are the choice of experienced DXers, especially if your interest is HF contesting. DX Engineering Skyhawk™ antennas provide the highest payback in performance and operating pleasure compared to any other single component in your station. The only better antenna choice is to combine one of our DX Engineering Skylark™ Dual-Band Yagi Antennas with the Skyhawk™! These well-designed, single-tower systems offer outstanding performance without the headaches of maintaining more substantial antenna farms. DX Engineering Skyhawk™ antennas reflect the latest computer-optimized design for maximum gain and bandwidth. They are built from the finest materials utilizing heavy-duty aluminum and all stainless steel hardware. Skyhawk™ operates from a single feed line and has a 90 mph wind survival rating! Have you ever had to replace a rotor in February? Skyhawk™ antennas offer minimal wind-loading for their size and are torque-balanced to reduce wear and tear on your rotor. Assembly is easy, as tower top adjustments have been eliminated and the elements are truly locked in place. DX Engineering Skyhawk™ features include: * 90 MPH wind survival rating * EZ-mount system for attaching antenna to mast * All parts de-burred * Stainless steel pop-riveted element locking * No user adjustment - just assemble it and put it up Additional specifications include: 20 meters: * Three elements * Effective boom length: 23 ft. * VSWR: less than 1.4:1 between 14.0 and 14.35 MHz, measured at feed-point * Front to back: >20 dB across the entire band * F/B peaks at 14.150 MHz at 21 dB * Gain: better than 7 dBi across band * 7.4 dBi gain at 14.350 MHz * Front lobe beam width (-3dB points) 63 degrees 15 meters: * Three elements * Effective boom length: 15 ft., 6 in. * VSWR: less than 1.5:1 between 21.0 and 21.45 MHz, measured at feed-point * Front to back: >16 dB across the entire band * F/B peaks at 21.350 at 24.5 dB * Gain: better than 7 dBi across band * 7.6 dBi gain at 21.45 MHz * Front lobe beam width (-3dB points) 56 degrees 10 meters: * Four elements * Effective boom length: 16 ft., 9 in. * VSWR: less than 1.5:1 between 28.0 and 28.9 MHz, measured at feed-point * Front to back: >14 dB across the entire band * F/B peaks at 28.5 at 21 dB * Gain: better than 7.7 dBi across band * 9.2 dBi gain at 28.9 MHz * Front lobe beam width (-3dB points) 47 degrees Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. So, what are you waiting for? Get a DX Engineering Skyhawk™ Tri-Band Yagi atop your tower, hook up your coax, and start working some serious DX! You've always heard about DX Engineering quality. DX Engineering Skyhawk™ Tri-Band Yagi Antennas are available now. Order yours today and enjoy great DXing with quality and value!
( 3 )
$2,378.97
InnovAntennas DXC-240 2 Element Compact 40 Meter Yagi
InnovAntennas DXC-240 2-Element Compact 40 Meter Yagi features very good efficiency, a relatively small footprint and exceptional bandwidth. There are several methods to shorten a dipole or the elements of a beam, including loading coils and capacity hats. However, coils reduce efficiency if they are mounted too close to the middle of the Yagi and capacity hats can reduce the length by only a few percent. Through careful calculation and robust construction, InnovAntennas designer Justin Johnson, G0KSC, has managed to craft this two-element beam for 40 the meter band with a boom that is just under 23 ft. (7m) in length. The elements have a maximum length of 37.73 ft. (11.5m) and this beam achieves a 2:1 SWR bandwidth of 120 kHz without the use of an antenna tuner. The DXC-240 is a rugged, seriously heavy-duty 40 meter Yagi featuring a 2.362 in. (60mm) square boom with a wall thickness of 0.079 (2mm), making it very stable, even without truss ropes. The elements use 1.97 in. (50mm) diameter aluminum tubes in the middle, which quickly taper to 0.98 in (25mm) at the ends. The DXC-240 has a wind area of 13.5 sq. ft. (1.25 sq. m), weighs 110 lbs. (50 kg) and has a turning radius of 22.1 ft. (6.73 m). Solidly constructed, efficient loading coils are at the middle of each half element, exactly where they belong to minimize losses and maximize bandwidth! Additional efficient reduction of length is achieved with capacity hats at the ends of the elements. The result is a compact 2-Element Yagi for 40 m that can achieve gain of about 10.53 dBi at 65.6 ft. (20 m) above ground with a spec of 6.29 dBi free space gain and a typical front to back of 15 dB. Impedance matching with an adjustable hairpin that provides a 50 ohm feedpoint that does not negatively affect the usable bandwidth. Order the InnovAntennas DXC-240 2-Element Compact 40 Meter Yagi from DX Engineering. Enjoy an efficient and heavy-duty 40 meter 2-element beam that is so compact, it can be installed at many radio amateur's stations.
( 1 )
$2,160.00
DX Engineering RT4500HD Rotator/3 Inch HD Mast Clamp and Controller Packages
DX Engineering RT4500HD Rotator/3 Inch HD Mast Clamp and Controller Packages conveniently combine DX Engineering's RT4500HD Rotator with a DXE-RTMC-3A Rotator Top HD Mast Clamp and your choice of either a DXE-RT-21DXE Digital Rotator Controller or microHAM ARCO Advanced Rotator Controller. * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$3,624.97
—
$4,299.97
InnovAntennas 13 Element HF Log Periodic Dipole Arrays
InnovAntennas 13 Element HF Log Periodic Dipole Arrays provide super wideband, high performance from 10 to 54 MHz. InnovAntennas LPDA's are designed using the very latest computer optimization techniques such as Dense Element Log Periodic Dipole Array (DELPA). This type of antenna was designed with specifications for a broadcasting center. Example photos display the DELPA-13 installed at the broadcast center. If you are looking for the best of the best from both a performance and mechanical construction perspective, then look no further than InnovAntennas LPDA! You have come to the right place! The DELPA-13 has 13 elements placed above the 37.73 ft. (11.5 m) by 3 in. (76mm) square boom, from which all elements are insulated. The feed point is 200 ohm and includes a 20 kW 4:1 balun. Feed line between the elements is silver plated hard-drawn copper wire spaced to produce a 300 ohm balanced-line feed. The DELPA-13 provides excellent, consistent results for the frequency range it covers with a relatively limited number of elements. Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Silver plated balanced line feed * Mill finished for highest levels of accuracy and performance Performance specifications of InnovAntennas 13 Element HF Log Periodic Dipole Array DELPA-13: * Typical forward gain: 6dBi * Typical F/B: 15dB * Gain at 33 ft. (10 m) above ground: 10dBi * Power rating: 15 kw+ (further limited by feedline and connectors) * Feed impedance: 50 Ohm * Boom length: 37.73 ft. (11.5 m) * Weight: 165.35 lbs. (75 kg) * Turning radius: 20.67 ft. (6.3 m) * Wind loading: Upon application * Wind survival: 100 mph (160 kph)
Not Yet Reviewed
$4,100.00
ICOM AH-740 Mobile HF Auto-Tune Antennas
ICOM AH-740 Mobile HF Auto-Tune Antennas provide near-instantaneous tuning across a 2.5 to 30 megahertz range. Their self-contained multiband antenna tuner creates a unified wide-range mobile antenna of exceptional capability. Designed to facilitate mobile HF communications for commercial and military users around the world; they are both rugged and reliable. AH-740s can handle up to 125 watts PEP/Data and support 45 memories for tuning times of approximately 150ms. Non-memory tuning takes only 2 to 3 seconds. Tuning requires a minimum of 5 watts to a maximum of 15 watts. Their included whip antenna is 5 ft. (1.54m) tall. Due to the size of their base, (5.7 x 6.3 in.), these antennas require special mounting considerations, such as a user-supplied receiver-hitch mount or a Gibbet mount or SUV-style spare tire antenna mount. A mounting base for the AH-740 installation must be locally prepared. Total height with the supplied whip and spring is 75.16 in. (6.26 ft.). AH-740 Auto-Tune Antenna features: * Electronic automatic tuning antenna (NOT a screwdriver) * Lightweight (7.7 lbs.) * 150ms typical high-speed tuning while memory tuning * Low power consumption (0.4A typical) * Operating temperature: minus 40 degrees F to plus 158 degrees F * Supplied accessories: Control cable and coaxial cable; 19.7 ft. each The following items are required for installation, but are NOT supplied with the AH-740. * Antenna mount * Mounting base * Rubber sealing tape (DX Engineering part no. DXE-3M2155) * Electrical tape (DX Engineering part no. TRM-6143) An optional fiberglass Near Vertical Incidence Skywave (NVIS) antenna kit is available, providing an element length of 4.5m (14.8 ft). When band conditions permit, their NVIS kit facilitates short-range Skywave propagation up to about 500 km (300 mi.). You go the extra mile to have the best mobile HF communications possible. Purchase one of these ICOM AH-740 Mobile HF Auto-Tune Antennas from DX Engineering and ensure that your multiband mobile HF antenna is the absolute best!
Not Yet Reviewed
$2,399.99
Alpha Antenna Digital Mode MiniLoop Antennas
Alpha Antenna Digital Mode MiniLoop Antennas are wideband magnetic loop antennas that can be deployed in two different physical arrangements to optimize efficiency. They provide coverage ranging from 0 to 1,500 miles (2,500 km) within the frequency range of 10 to 54 MHz, exhibiting the following functional characteristics: * RX with low noise characteristics from 1.8MHz through 1GHz and higher frequencies. * TX support without a tuner for Digital Modes from 10 to 54MHz.
Not Yet Reviewed
$2,300.00
Momobeam TRI10 Multiband HF Yagi Antennas
Momobeam TRI10 Multiband HF Yagi Antennas are a widely favored, medium sized triband Yagi antenna system that delivers impressive performance at an attractive price point. Covering the 20, 15, and 10 meter bands through a single coaxial feed line, these antennas offer a fully optimized element configuration for each band. On 20 and 15 meters, they feature three full size elements—reflector, driver, and director—while the 10 meter band incorporates four elements arranged as a reflector, driver, and two directors for enhanced gain and directivity. Engineered for convenience, TRI10 Yagi antennas require no calibration or band specific adjustments; during assembly, there is no need to choose between CW and SSB segments. They provide flat SWR below 1.5:1 across all operating bands, making them perfectly suited for modern transceivers and high power linear amplifiers. Each TRI10 is supplied with an assembly tool and spare parts, including bolts and aluminum tubing, ensuring operators have everything needed for smooth installation. The high quality 3kW RF choke balun—often an extra cost option with other manufacturers—is included as standard to ensure efficient, trouble free operation. Built on a robust square boom, these antennas offer long term stability, precise element alignment, and a clean, professional appearance. All hardware ships in clearly labeled bags, and every aluminum tube is individually marked, making assembly simple, intuitive, and fast.
Not Yet Reviewed
$2,230.99
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$2,215.99
Momobeam Mono4-20 Monoband Yagi Antennas
Momobeam Mono4-20 Monoband Yagi Antennas are full size, four element Yagi antennas designed to deliver excellent SWR bandwidth, optimal gain, and impressive front to back performance. These antennas remain lightweight for effortless handling while offering the strength needed to withstand harsh weather conditions. MONO4 20 excels in multi stacked array configurations. Stacks can be optimized for maximum forward gain or arranged to broaden directional coverage across multiple regions—making them an excellent choice for contest stations and serious DX operators. Built on a square boom, they are supplied with an assembly tool, spare hardware components, and clearly labeled bolts and aluminum tubes to ensure fast and intuitive assembly. All hardware is packaged in separate, clearly marked bags for added convenience. Mono4-20 can be mounted on a mast or side mounted on towers and require a medium duty rotator. A 3kW RF choke balun is included as standard equipment—an essential component that many manufacturers offer only as an optional upgrade. Momobeam RF Chokes are built using high quality, low loss, double shielded coaxial cable with a Teflon dielectric, combined with carefully selected ferrite material sleeved over the cable. Together, these elements create a high impedance path for RF, providing excellent isolation between the antenna and the coaxial feedline.
Not Yet Reviewed
$2,230.99
Momobeam Mono5-15 Monoband Yagi Antennas
Momobeam Mono5-15 Monoband Yagi Antennas are five element OWA (Optimized Wideband Antenna) designs that provide traditional, reliable performance for 15 meter operation. They easily cover the entire band with a flat SWR curve below 1.5:1, delivering excellent front to back ratio and strong gain across the operating range. Built on a robust square boom, these antennas include an assembly tool along with spare bolts and aluminum tubing, with all hardware supplied in clearly labeled bags and every aluminum tube individually marked to ensure fast and trouble free assembly. MONO5 15 antennas can be mast mounted or side mounted on towers and require a medium duty rotator for optimal directional control. A 3kW RF choke balun is included as standard equipment—an essential component that many manufacturers offer only as an optional upgrade. Momobeam RF Chokes are built using high quality, low loss, double shielded coaxial cable with a Teflon dielectric, combined with carefully selected ferrite material sleeved over the cable. Together, these elements create a high impedance path for RF, providing excellent isolation between the antenna and the coaxial feedline.
Not Yet Reviewed
$2,280.99
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$2,195.99
—
$3,617.99
Momobeam TRI12-SF Separate Feed 20/15/10 Meter Yagi Antennas
Momobeam TRI12 SF Separate Feed 20/15/10 Meter Yagi Antennas are outstanding medium sized triband Yagi antennas designed for operators who demand strong performance without the compromises of traps or mechanical tuning systems. These antennas cover the 20, 15, and 10 meter bands with exceptionally low SWR, and because all elements are full size, they deliver performance that clearly surpasses older generation designs. No calibration or adjustments are required—simply enjoy reliable operation, even in the most challenging pileups. Thanks to their separate feedlines, TRI12 SF antennas allow three different transceivers to operate simultaneously, effectively functioning as three independent monoband antennas when used with proper band pass filters to protect station equipment. This configuration makes them an excellent choice for multi operator, multi band operation, whether for contesting or chasing DX. Assembly is engineered to be simple and intuitive. The TRI12 20/15/10 SF antennas use a square boom structure, and all components arrive well organized for a smooth installation experience. Every hardware piece is packaged in its own labeled bag, and all aluminum tubes are clearly marked, ensuring fast and error free assembly. These antennas require three coaxial feedlines, and a medium load rotator for proper operation. Three high quality 3kW RF choke baluns are included as standard—an important advantage, as many manufacturers offer them only as optional upgrades. With their combination of high performance, mechanical strength, and advanced separate feed capability, the TRI12 SF Separate Feed Yagi Antennas become indispensable partners for serious Amateur Radio operators seeking powerful and flexible triband performance.
Not Yet Reviewed
$3,609.99
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas are the perfect choice for operators who appreciate the unique characteristics of the WARC bands. These antennas offer medium overall dimensions while maintaining full size elements across all three bands, ensuring optimal efficiency and strong on air results. The design features four elements on 24 MHz, three elements on 18 MHz, and two elements on 10 MHz, delivering excellent gain, bandwidth, and pattern control on each band. Engineered for consistent, high quality performance, TRI9 30/17/12 antennas provide a flat SWR curve with values under 1.5:1 across all three WARC bands without requiring additional tuning. Their electrical performance allows operators to break through demanding pileups with confidence, giving the station a significant advantage during DX openings and rare entity activations. Each TRI9 30/17/12 antenna includes an assembly tool and spare parts such as bolts and an aluminum tube, offering convenience and long term serviceability. A high quality 3kW RF choke balun is supplied as standard—a premium component that many manufacturers offer only as an extra-cost option. This balun helps maintain clean RF behavior, reducing unwanted feed line currents and improving overall system performance. Assembly is designed to be simple, fast, and intuitive. The antennas use a square boom structure, and all hardware arrives in individually labeled bags. Every aluminum tube is clearly marked to ensure accurate placement, making the installation process smooth and error free even for first time builders. Requiring a medium to heavy duty rotator, the TRI9 30/17/12 Meter Yagi Antennas combine mechanical strength, refined electrical engineering, and user friendly assembly. They deliver outstanding performance for WARC enthusiasts who want powerful, dependable antennas without excessive footprint or complexity.
Not Yet Reviewed
$3,609.99
Momobeam TRI16-BT 20/15/10 Meter Yagi Antennas
Momobeam TRI16 BT 20/15/10 Meter Yagi Antennas are high performance tri band antenna systems engineered specifically for installation on large towers and demanding station environments. Designed for operators who require exceptional gain, pattern control, and mechanical durability, these antennas deliver powerful, consistent results across the 20, 15, and 10 meter bands. TRI16 BT antennas are truly unique. The generous spacing between the elements around the boom to mast plate allows installation on towers with sides up to 70 inches per side. Built on a 38 foot boom, each antenna features a total of sixteen elements: four elements on 20 meters (reflector, driver, and two directors), five elements on 15 meters (reflector, driver, and three directors), and seven elements on 10 meters (reflector, driver, and five directors). This aggressive element configuration delivers outstanding forward gain and strong rejection performance across all bands. Each TRI16 BT antenna includes an assembly tool and spare hardware such as bolts and an aluminum replacement tube. A high quality 3kW RF choke balun is also included as standard—an important advantage, as many manufacturers offer similar components only as optional extras. This premium balun ensures proper feed line isolation and cleaner RF behavior for high power operation. Assembly is designed to be straightforward and intuitive. The antennas use a square boom structure for strength and reliability, and all hardware is packaged in individually labeled bags. Each aluminum tube is clearly marked for quick identification, ensuring a smooth, error free installation process even on complex large tower projects. TRI16 BT antennas require only a single coaxial cable and a medium to heavy duty rotator to support their robust mechanical build. With their combination of advanced engineering, substantial element count, and tower friendly design, these antennas provide exceptional performance for serious Amateur Radio operators who demand the very best from their tri band Yagi systems.
Not Yet Reviewed
$4,572.99
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas are a single, separately fed dual-band full size antenna designed for the 14MHz (20m) and 21MHz (15m) amateur bands. With independent SO-239 feed lines connectors for each band, it enables simultaneous operation by two transceivers—without the need for expensive diplexers. Perfect for multi-operator contesting, the DUO8 15/20 SF eliminates the need for additional towers. Simply pair it with high-quality bandpass filters and you're ready to go. Enjoy true monoband performance from a single dual-band antenna. Assembly is simple and intuitive. The DUO8 15/20 SF uses a square boom, and all hardware is packaged in clearly labeled bags. Each aluminum tube is also labeled to ensure a quick and hassle-free setup.
Not Yet Reviewed
$3,245.99