Availability
Antennas
Yaesu ATAS-120A Auto Active Tuning Antennas
Yaesu's patented ATAS™ Active Tuning Antenna System has been enhanced with the latest model: ATAS-120A. This is a unique mobile antenna that provides HF, VHF and UHF coverage with automatic motorized tuning. Designed for use exclusively with Yaesu transceivers that support ATAS, microprocessor controlled voltages are sent on the coaxial cable to adjust the antenna radiator length for best SWR. Yaesu ATAS-120A active tuning antennas cover the 7, 14, 21, 28, 50, 144 and 430 MHz Amateur bands and are compatible with the Yaesu FTX-1, FT891, FTDX-10, FT-710, FT-991A, FT-991, FT-857D, FT-897D, FT-100, FT-100D and the FT-450D. They are typically attached to a vehicle hatch or trunk lip UHF mount (not supplied), also available from DX Engineering. The ATAS-120A antennas were designed for mobile use, however they can be adapted for base, or portable operation with the appropriate mount and a substantial counterpoise radial wire system. Specifications of the Yaesu ATAS-120A Auto Active Tuning Antennas: * Operational Bands: 40, 20, 15, 10, 6 and 2 meters and 70 cm * Height, appx.: 4.59 to 5.25 ft. * Weight, appx.: 1.98 lbs. * Input Impedance: 50 ohms * Maximum Power: 120 Watts, SSB, CW, 50 percent duty cycle * Matched SWR: Less than 2.0:1 with proper grounding or counterpoise As with any HF, VHF and UHF mobile antenna, performance depends upon the grounding of the mount and bonding to the metal vehicle surfaces to create an optimal ground plane. Portable VHF and UHF operation is made possible with the addition of the optional Yaesu ATBK-100 Antenna Base Kit. This kit is not required, nor should it be used, for mobile operation. Operational convenience and performance is available for your Yaesu HF, VHF and UHF Mobile Transceiver. Order Yaesu ATAS-120A Active Tuning Antennas from DX Engineering.
( 50 )
$449.99
Yaesu G-450ADC Medium-Duty Rotator Systems
Yaesu G-450ADC Medium-Duty Rotator Systems are the entry-level rotator and controller that are perfect for small HF beams, a tri-bander or VHF and UHF antennas up to about 10 sq. ft. of tower-mounted wind load. A lesser wind load of about 5 sq. ft. can be handled when mounting the G-450ADC on top of a mast with the optional lower mast bracket, GC-038. Rotate Amateur and professional antennas with the Yaesu's handsome 120 Vac desktop remote control console, featuring a compass-style indicator at the station operating position. The G-450ADC rotator system provides 450 degrees of azimuth rotation in just over one minute. The rotator handles masts of 1.25 to 2.48 in. outside diameter and, when tower mounted, a total vertical mast load up to 200 lbs. In the Yaesu G-450ADC, the clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-450ADC Rotator motors and controllers operate with a 20 V DC control voltage, four-wire system, using the provided connectors to be installed at each end of the user supplied control cable, same as the previous models. For clarity, the new DC rotator motors are marked "G-450DC" at the connector. The rear panel of the controller is titled "G-450ADC" on the serial number label. WARNING: The legacy Yaesu G-450A Rotator motors and controllers used a 26 VAC control voltage, five-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-450ADC components, which only use pins 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use four-conductor, 20 gauge control cable (4 x 20 AWG). If the rotator cable needs to be longer than 125 ft., then use four-conductor 18 gauge cable (4 x 18 AWG). The input voltage for the G-450ADC controller is labeled "117 VAC" to indicate house current of 110 to 120 Vac. When you need a medium-duty rotator system, which is durable and attractive, order a new Yaesu G-450ADC Medium-Duty Rotator System from DX Engineering.
( 47 )
$429.99
Chelegance MC-750 Portable HF Vertical Antennas
Chelegance MC-750 Portable HF Vertical Antennas feature a quick, no tools required antenna system that is easy to set up and disassemble covers 40 through 6 meters and will handle up to 100 watts. The antenna base with a built-in ground spike has a female SO-239 connector and jacks for up to 4 preassembled, 11.48 ft. counterpoise radials. The MC-750 functions as a quarter-wave vertical ground plane antenna for the 14 - 50 MHz frequency range while using the included 17 ft. telescoping whip. Install the supplied loading coil for operating in the 7 MHz/40M band. This vertical antenna kit comes packed in a handy carrying bag to keep things organized. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: * Antenna Base with Ground Spike * 7 Mhz Loading Coil * 1.64 ft. Extension * 17 ft. Telescopic Whip * 4 – 11.48 ft. Wire Radials * Cable Winder * Carrying Bag
( 49 )
$327.99
Alpha Antenna HF/VHF/UHF MagLoop EmComm Antennas
Alpha Antenna HF/VHF/UHF MagLoop EmComm Antennas are designed in an oval shape to maximize signal transmission skyward. These versatile antennas include a low-loss BNC coaxial feedline connector and built-in, removable tripod legs, making it ideal for various deployments such as balconies, desktops, parks (POTA), summits (SOTA), and similar operating locations.
( 7 )
$399.00
Comet GP-9 Dual-Band VHF/UHF Base Vertical Antennas
Comet GP-9 Dual-Band VHF/UHF Base Vertical Antennas provide very high gain on the 2-meter and 70-centimeter bands. These superior-quality base station antennas feature a three-piece, heavy duty, UV-stabilized fiberglass radome for many years of reliable service. With the highest power rating in their class, these base station antennas are ready to handle long QSOs from your high-power VHF/UHF radios. Although light in weight, they incorporate strong, easy-to-use, extruded aluminum and stainless steel clamp-on mounting hardware. While the standard GP-9 features an SO-239 style connector base, the GP-9N version is available with an N-Type female connector for maximum signal transfer! When you need to reach out with absolute maximum gain from your omnidirectional VHF/UHF base station antennas, remember that Comet GP-9 Dual-Band VHF/UHF Base Vertical Antennas were designed just for you!
( 52 )
$324.95
Buckmaster OCF Dipole Antennas
Buckmaster OCF Dipole Antennas are made from the best quality materials with a completely potted waterproof balun and no external connectors. They are designed to give you years of trouble-free service! Buckmaster antennas are shipped fully assembled, ready to deploy with no tuning or trimming required. Choose a model with a 300 watt balun or a 3,000 watt balun. Each has a weather protected SO-239 connector. They are offered in three lengths to operate in these bands: - 270 ft. models cover 160, 80/75, 40, 20, 17, 12, 10, 6 meters - 135 ft. models cover 80/75, 40, 20, 17, 12, 10, 6 meters - 68 ft. models cover 40, 20, 10 and 6 meters Classic OCF (Off-Center Fed) antennas, like Buckmaster, typically have the feedpoint at the 2/3 and 1/3 point on the overall half-wave wire antenna. That means one leg is twice as long as the other. They are intended to be installed with the feedpoint at 35 ft. and the ends at about 15 to 25 ft. However, other installations such as a horizontal "flat top" can work very well. A tuner may be required for best SWR. Buckmaster OCF Dipole Antennas are a very simple way to get on the air and work multiple bands… quickly! They are a great choice as a first antenna or as a supplement to others. Order your Buckmaster OCF Dipole from DX Engineering.
( 67 )
$276.00
—
$429.00
Comet CHA-250HD HF/VHF Vertical Antennas
Comet CHA-250HD HF/VHF Vertical Antennas is an updated design of the popular CHA-250B vertical antennas. These antennas make the most of a tight situation! - Please CLICK on the title of the product(s) listed for the Overview, Specifications, a complete Description and Suggested Parts. Links to instruction manuals also appear in the Documentation section.
( 41 )
$499.95
REZ Antenna Systems Recon 40 Version 2 High Performance HF Antenna Coils
REZ Antenna Systems Recon 40 Version 2 High Performance HF Antenna Coils are engineered for reliable HF operation across the 40–10 meter bands when paired with the REZ-Z17 17-foot telescoping whip (sold separately). Built with 14-gauge enameled copper wire, the Recon 40 handles up to 500W SSB, 300W CW, and 200W digital (50% duty cycle). Switching bands is effortless with the integrated weatherproof coil bypass switch—just flip the switch and adjust the whip for higher frequency operation.
( 3 )
$349.00
DX Engineering Pre-Assembled Radial Wire Kits
DX Engineering Pre-Assembled Radial Wire Kits have 1/4 in. ring terminals that are CRIMPED and SOLDERED onto one end of high quality 14-gauge stranded copper wire with UV black soft PVC insulation. They make the installation of your ground radial system fast and easy. The stranded wire and soft insulation means that the wire will lay flat as you place it on the ground for a simple, no-tangle installation and convenient attachment to your DX Engineering Radial Plate, model DXE-RADP-3. These radial wire kits are designed for users of vertical antenna systems that have the need for a high quality radial system for optimum antenna performance. These kits feature: * 20 radial wires of the same length in each package * 20-packs are offered in three lengths; 20 ft. (-20RT), 32 ft. (-32RT) and 65 ft. (-65RT) * 10-packs of 120 ft. radials for 160 meter verticals also available (-120RT) * 14 AWG, stranded copper wire * UV resistant black soft PVC insulation * 1/4 in. ring terminals are machine crimped and hand soldered onto each radial wire Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. An effective and efficient system of many radials dramatically improves vertical antenna performance. Give your vertical a boost with DX Engineering Pre-Assembled Radial Wire Kits!
( 29 )
$345.99
—
$425.99
Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages
Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages are trapped-vertical antennas that provide an omni-directional pattern. 6BTVs were designed as self-supporting verticals to provide efficient operation in the 10, 15, 20, 30, 40, and 75 or 80 meter bands. These antennas perform well in restricted space areas. For peak performance, a field of radial wires should be used. Hustler 6-BTVs provide for automatic selection of bands through the use of optimum-Q traps which are individually and precisely tuned and internally sealed at the factory. These traps are parallel-tuned circuits, which provide very effective isolation between the vertical sections, permitting precise multi-band operation. Broadband operation, with low SWR over the entire ham band, (limited on 80 and 75 meters), is possible in a proper installation. These antennas were designed to provide optimum performance from both an electrical and mechanical standpoint. Mechanically, these antennas boast a heavy-duty base and heavy-duty aluminum tubing throughout. The mechanical assembly is accomplished with all stainless steel hardware. Performance provided by the Hustler 6BTVs is better than any other antenna of this type. Broad-banding is such that one measurement and setting permits both phone and CW operation. The antenna provides nominal 52-ohm base impedance when installed and tuned according to the instructions. The radiation efficiency is equal to, or greater than, other trap verticals. An optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance. Want a multi-band vertical antenna with a proven track record? Order Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages from DX Engineering!
( 44 )
$499.98
Yaesu Rotator Units
Yaesu Rotator Units are available as replacements or as stand-alone azimuth positioners for use with a third party controller. They include only the top mast bracket and hardware. Lower mast brackets are sold separately.
( 19 )
$329.99
—
$389.99
DX Engineering RPA-2 Modular Receive Preamplifiers
DX Engineering RPA-2 Modular Receive Preamplifiers are newly designed versions of the RPA-1 with internal slots for accessory modules. They accommodate the addition of the one optional plug-in module, such as the 75 to 50 ohm Impedance Transformer Module, or the Receiver Guard 5000HD Plug-In Module, or the DX Engineering Clifton Laboratories Z10020 AM Band Filter Module. DXE-RPA-2 preamps have very low internal noise and are optimized for the 300 kHz to 35 MHz range. They help you hear the weakest signals without artificially raising the noise. Meticulous craftsmanship and durable, robust components allow these preamplifiers to withstand high signal levels while providing superior dynamic range and third-order intercept performance that equals or exceeds most receiver and transceiver front-ends. RPA-2 Receive Preamplifiers have key features added, as requested by our tech-oriented customers and enthusiasts: - Internal slot accommodates the optional 75 to 50 ohm Impedance Transformer Module to accomplish typical receive antenna feedline to equipment transitions without losses -Also allows direct connection to 50 ohm receive antenna feedline BNC connectors with no transformer required - Internal slot for DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module – Front-end protection for the RPA-2 - Secure BNC female connectors and receive-system friendly F female connectors remain; both prevent accidental connection to transmitting devices with UHF connectors - A green LED indicates when DC power is present and the preamplifier circuit is engaged. - An ingenious positive-capture threaded-sleeve 2.1 mm power connector that ensures the DC power cannot be accidentally disconnected from the RPA-2. - Alternatively, a simple internal jumper change allows the RPA-2 to be powered by DC on the feedline While many other common preamplifiers suffer from harmonic distortion, RPA-2 Modular Receive Preamplifiers include our exclusive, advanced push-pull design that eliminates harmonic distortion. Their high quiescent current increases their ability to handle strong signals without distortion or overload. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 Vdc input. Please do not use a cheap wall transformer or noisy switching wall-wart to power these top-of-the-line preamplifiers. Indoor installation at the back of the radio is recommended for RPA-2. For those who want to place them in an enclosure at a receive antenna system, a handy internal jumper allows these new units to be powered on the coaxial cable. RPA-2 Receive Preamplifier Specifications: -Input and Output Connectors, female: BNC and F -Frequency Range: 300 kHz to 35 MHz -Gain: 16 dB, +/- 1.5 dB (over entire frequency range) -Output Third Order Intercept: 43 dBm -Noise Figure: 3.5 dB -One dB Compression Point: +26 dBm (400 mW output) -Dynamic Range, IM3: 110 dB or greater (500 Hz bandwidth) -Power Requirement: 12-18 Vdc, 140 mA max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering RPA-2 Modular Receive Preamplifiers offer superior receiving results on crowded medium wave and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the advanced operational performance of DX Engineering Receive Preamplifiers. You will be able to pull in the weakest signals and snag that rare one, under the most difficult conditions, when you need it the most. Order your DX Engineering RPA-2 today!
( 14 )
$269.99
DX Engineering RTR-2 Modular Receive-Transmit Interfaces
DX Engineering RTR-2 Modular Receive-Transmit Interfaces provide the easiest and safest method for connecting a dedicated receive antenna to an HF transceiver that does not have a separate receive antenna input. Placed inline with the transceiver's antenna connector, the RTR-2 does the job of a 200 watt T/R relay using the amplifier keying line for failsafe protection, so your transmitted energy cannot go to the receive antenna. Three internal Plug-in Module option slots provide added features and protection: * DXE-RPA-2-PM Receive Preamplifier Plug-in Module * DXE-TRI-PM Transmit Receive Interrupter Plug-In Module * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-in Module DX Engineering RTR-2 Modular Receive-Transmit Interfaces allow the standard transceiver owner to enjoy the advantages of separate receive antennas. For the unswitched receive antenna (RX ANT) port on expensive transceivers, the RTR-2 interface also adds inexpensive failsafe protection. The receive antenna line can be opened or grounded with the optional DXE-TRI-PM Interrupter plug-in module. The RTR-2 is a very useful device for many applications, including: * Connection of external receiving antennas to transceivers lacking external antenna ports * T-R antenna switch for older equipment using separate transmitters and receivers * Interfacing antennas to older phasing or noise cancelling systems * Addition of a switchable receive preamplifier to any transceiver or transmitter and receiver combination * Excellent failsafe receiver protection for close-spaced transmit and receive antennas, without performance degradation of diode circuits of other devices. RTR-2 units feature a unique, failsafe connection method that prevents the hot switching and timing errors that are common on other transmit/receive relays. RTR-2 interfaces switch fast enough for partial break-in CW operation. There are many simple applications for the new RTR-2 and now internal modules can add dramatically improved reception of those really weak signals on the crowded HF bands! DX Engineering RTR-2 Modular Receive-Transmit Interfaces enable operators to enjoy improved reception with any low noise receiving antenna system. This shielded enclosure relay system provides a safe method of connecting a receive antenna, such as a Beverage, Active Receive system, or other receiving accessories to your radio. Major features that make the DX Engineering RTR-2 Receive Antenna Interfaces your best choice for a receive T/R system device: * New Status Indicating Color-changing LEDs * Three internal slots for new DX Engineering modules * New Key Line Out connector for Amplifier * New internal jumper for placing DC on the Receive Antenna feedline for Active or Loop receive antennas * Attractive and heavy stainless steel enclosure * 200 watts RF switching capability * Supports CW partial break-in * Main transmit antenna connector is SO-239 (UHF female) * Radio RF connector is SO-239 (UHF female) * Receive antenna input is 75 ohm F connector * Receive outputs are standard 75 ohm Type F connectors * Inputs are 50 ohm BNC or 75 ohm F (Optional transformer module available) * Safe switching--transmit antenna is always connected to transceiver on power-off * Hot switching lockout--disables receive antenna during transmit mode (Optional DXE-TRI-PM can be set to short the RX ANT line) * Versatile--allows inclusion of Optional RF preamplifiers and other plug-in modules * Simple 13.8 Vdc input for all operations An indispensable accessory for the DX enthusiast and useful for any Amateur's shack, DX Engineering RTR-2 Modular Receive-Transmit Interfaces can help you expand and improve your station's antenna connections and the protection of your equipment.
( 12 )
$375.99
DX Engineering MBVE-5A/AE Series SAF-T-TILT™ Vertical Antenna Components
DX Engineering MBVE-5A and MBVE-5AE Vertical Antenna Components are the specialized parts for these SAF-T-TILT™ antenna systems. Top tubing sets include hardware are used on both standard and extended base versions. Standard and extended base tubing and insulators use separate hardware sets included in antenna packages or sold separately. These components are original parts, which are also available here as replacements. These are genuine DX Engineering SAF-T-TILT™ Vertical Antenna Components.
( 7 )
$499.99
Diamond Antenna Mobile Screwdriver Antennas
One word about the Diamond Antenna Mobile Screwdriver Antennas…Wow! If you are looking for a "covers it all" mobile HF antenna, Diamond Antenna has a solution for you! Imagine covering all HF bands, ALL OF THEM, 80 through 10 meters, with only one mobile antenna! These adjustable mobile antennas use a simple 12-volt system to change the electrical and physical length of the antenna while you sit inside the car. They come with a cigarette-lighter plug to supply power to the screwdriver system and a small switch panel to provide control. Simply press a button and let the 'screwdriver' mechanism do the work! There is no multitude of changeable coils to mess with and no hardware or tool headaches. You can remotely move from band to band and be sure of a low SWR in the process. As with many HF mobile antennas, Diamond Antenna Mobile Screwdriver Antennas are over 73 inches tall when fully extended and weigh over two pounds. Please take this into consideration when choosing a mobile antenna mount. We certainly wouldn't want your shiny new antenna bouncing down the highway because the antenna mount was too weak! Diamond Antenna provides their screwdriver antennas in either a UHF or 3/8-24 stud mounting. Whichever mounting scheme you choose, you may be certain that Diamond Antenna Mobile Screwdriver Antennas will allow you to change bands easily - without fetching another screwdriver from your toolbox! Plus, you will enjoy the enhanced performance that a continuously tunable antenna will bring to your HF mobile operations. Order Diamond Antenna Mobile Screwdriver Antennas and Mobile Antenna Mounts from DX Engineering!
( 14 )
$399.99
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$355.99
—
$499.99
VA6AM Engineering HF Multiplexers
VA6AM Engineering HF Multiplexers are transmit and receive capable Diplexers and Triplexers that are sophisticated RF filtering splitter/combiners. Always used along with monoband HF Band-Pass Filters, they allow multi-transceiver stations to share a single multi-band antenna, simplifying multi-op antenna systems. Supplied with standard UHF Female/SO-239 connectors, HF transmit multiplexers are great for Field Day, contesting and multi-op DXing. Use them anytime you need to operate multiple rigs on one multi-band antenna! Insertion loss is negligible; typically, less than 0.2dB in band! VA6AM Engineering Diplexers and Triplexers provide good levels of isolation between band ports. The multiplexer's main purpose is to provide 50-ohm SO-239 connections for multiple transceivers and balance the impedances for a single 50-ohm feedline to a multi-band antenna. Alternatively, VA6AM Engineering Diplexers and Triplexers can be used to combine multiple low-SWR resonant antennas into a switchless multiband system for a single transceiver.
( 11 )
$359.99
—
$389.99
DX Commander Expedition Portable HF Multi-Band Vertical Antennas
DX Commander Expedition Portable HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the Expedition covers the Amateur bands 40 to 6 meters. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Expedition achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The Expedition antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 8 )
$434.13
DX Commander CLASSIC 2 HF Multi-Band Vertical Antennas
DX Commander CLASSIC 2 HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the CLASSIC 2 covers the Amateur bands 40 to 2 meters*. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the CLASSIC 2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The CLASSIC 2 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 6 )
$441.97
ICOM AH-710 Folded Dipole Antennas
ICOM AH-710 Folded Dipole Antennas get you on the air--fast! You can cover all amateur bands and operate with up to 150 watts with these ICOM pre-assembled, multi-band folded dipole antennas. Designed to work with any ICOM amateur HF transceivers, including their marine transceivers, the AH-710 antennas can be installed in flat top or inverted V configurations. The specs for ICOM AH-710 folded dipole antennas are: * Frequency range: 1.9 to 30 MHz * Power rating: 150 W * Input impedance: 50-ohm connection * VSWR: Less than 2:1 (1.9 to 18 MHz) Less than 2.5:1 (18 to 30 MHz) * Length: 24.5 m (80.4 ft.) * Coaxial feed line: 30 m (98.4 ft.) with PL-259s * Support Rope: 10 m (32.8 ft.) white Nylon * Auto-bonding Tape: 30 cm ( 1 ft.)
( 13 )
$429.99
DX Commander Rapide2-PLUS HF Multi-Band Vertical Antenna Packages
DX Commander Rapide2-PLUS HF Multi-Band Vertical Antenna Packages include a DXC-RAPIDE-GP2 Ground Mounted Fiberglass Post designed for ground mounting the RAPIDE2 antenna system. These Ground Mounted Fiberglass Posts are extremely strong and flexible tubing that's constructed with a high glass, no carbon content fiberglass via a pultrusion process making them perfect for vertical antenna projects. These 3mm, or about 1/8in. wall fiberglass posts are 45.276 (115cm) long and features a corrosion barrier built into the surface for longer life. DX Commander Rapide2 HF Multi-Band Vertical Antennas feature a newly designed and upgraded all-metal end cap for the telescoping mast and upgraded ground plate assembly. These resonant multi-band vertical antenna systems are designed to operate on the 30 through 10 meter Amateur Radio bands (with the 6m band handled by the 30m element as a 1.25 wavelength element). Operation on the 40 meter band is possible with the addition of a user made coil (see the user guide for details). DX Commander Rapide2 vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. Spacer Plates keep the wire elements and support ropes neatly arranged around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Rapide2 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, with no traps, coils or antenna tuners. Band-hopping, DXing and simultaneous multi-band operations are supported. The Rapide2 antenna is rated at 1500W SSB/CW, 375W FT8 and other digital modes.
( 2 )
$444.90
DX Engineering XB-5 Hexx Beam 5-Band Wire Element Kit
DX Engineering XB-5 Hexx Beam 5-Band Wire Element Kit is a component of parts and assemblies that are used to construct the directional XB-5 HF Antenna. It features innovation and convenience for the assembler of this high performance antenna. Here are the items included in this kit: - Wire Elements made from high quality AWG 14 stranded copper with a relaxed black PVC insulation for longevity - Band specific Driven Elements and Reflectors are pre-cut and pre-assembled with color coded and printed shrink tubing near one end for easy identification - Floating Element Wire Guides – studded element and P-clamps with nylon guide tubes that secure the elements to the Hexx Beam fiberglass spreaders while allowing independent movement to reduce strain - Innovative Element Spacers, five pairs of band specific lengths made of Acetal rods that are cut and drilled for specific band spacing. Closely spaced holes secure driven and reflector wire element ends with a simple serpentine routing. This allows easy adjustments of element lengths if tuning is necessary. Refer to the DX Engineering XB-5 Hexx Beam HF Antenna manual for more information.
( 1 )
$375.99
WiMo X-Quad Antennas
WiMo X-Quad Antennas, with separate monoband models for 144-146 MHz or 430-440 MHz, represent a refinement of VHF and UHF cross-polarized Yagis. They are well-known in Europe as "multi-element quads"—an antenna with aluminum elements, not a wire and fiberglass antenna—which offer excellent gain with a relatively short boom length. X-Quads are a great solution due to their short length and lightweight construction, especially for VHF/UHF satellite systems which require rotation in all compass directions and elevations. Two X-Quad Antennas, one for 144-146 MHz and one for 430-440 MHz, may be mounted at opposite ends of an azimuth-elevation rotator cross-boom for high-performance full duplex Satellite operations. For either or both bands, X-Quad Antennas may instead be used in a stationary mount, as pictured, for all-mode terrestrial operations. In either application, multiple X-Quad Antennas may be stacked vertically and horizontally for additional gain and tighter patterns. The WiMo X-Quad special features, developed specifically for Satellite Amateur Radio include: * Switchable Polarization Plane; horizontal/vertical/right hand circular/left hand circular (remote switching requires optional equipment) * High gain compared to other antenna forms due to the "stacking effect" * Short boom length and compact design * Back-end boom or mid-boom centered mounting to the mast is possible The radiator element is a "stacked quad" multi-element beam, for which linear polarization can be compared to a crossed slotted radiator. However, the advantage of the X-Quad is that it can be optimally used for the desired polarization by simply changing the feed. Compared to a typical cross-polarized Yagi, all directors and reflectors are active in the X-Quad, which enables the compact design. As with cross-polarized Yagis, switching is accomplished on the mono-band X-Quad either by a coaxial relay or with a band specific WiMo Remote Polarization Switch (sold separately). If the remote switch is mounted at the antenna, then only one coax cable and a 4-conductor control cable are required, sold separately. If the Switch is used at the station, then two coaxial cables from the antenna to the station are needed. The WiMo X-Quad Antenna can also be permanently set for circular operation by using an optional, band-specific Phase Line. The secondary elements are arranged diagonally in relation to the square-shaped driven element, which corresponds to the voltage distribution on the radiating element, for the most favorable results. In comparison to Yagi antennas, the X-Quad pattern and tuning are affected less by the influence of external fields, making them ideal for installation under a roof, in an attic space. All elements are electrically conductively connected with boom and cable outer sheath, thus eliminating interference from atmospheric noise. Two Type-N female coaxial connectors, one for each polarization, are mounted in a housing that is waterproof. Boom and elements are made of aluminum, all hardware is stainless steel. Construction and design of the antennas are protected by law (DBGM). The antennas are designed for boom-end mounting; however, alternatively the mast clamp can be mounted in the middle of a non-metallic boom. These antennas have a split boom, so their transport length is only 29.53 in. (75cm) for the 2m antenna and 25.59 in. (65cm) for the 70cm X-Quad. For portable operations they can be stowed away comfortably in the trunk of car and their shipping costs are comparatively low.
( 5 )
$349.99
M2 Antennas 2M7 2 Meter Yagi Antennas
M2 Antennas 2M7 2 Meter Yagi Antennas are top quality, capable beams for the operator who wants the convenience of a short, 9 ft. boom, in an antenna that can handle full power and deliver true performance over the long term. The 2M7's are computer optimized Yagis that will outperform longer old design antennas. They cover the whole band with only slight performance degradation at the band edges. Their side lobes are very low and are perfect for stacking two or more for increased gain. Their light weight and durability make them great for portable hill topping and rover operations. M2 Antennas 2M7 are built for long term electrical and mechanical integrity. Their CNC machined "T" Match Block features O-ring sealed connectors and is internally sealed with a space-age silicone gel with nearly four times the dielectric strength of air. Full power operation is no problem for these antennas. Their elements are 6061-T6 3/16 in. aluminum rod, mounted through the boom on UV stabilized button insulators. All hardware is stainless steel except U-bolts. Other key electrical and mechanical parts are CNC machined for accuracy and durability. M2 Antennas 2M7 2 Meter Yagi Antennas can take your FM, SSB, CW or digital mode 2 meter operations to a new level. Get yours from DX Engineering!
( 12 )
$258.99