Availability
Antenna Switches
Diamond Antenna CX-210A Heavy Duty Wideband Coaxial Switches
Diamond Antenna CX-210A Heavy Duty Wideband Coaxial Switches are two-position coaxial switches providing very low loss and high isolation. They are rated DC to 1,000 MHz and can handle up to 1,500 watts CW at HF frequencies. These switches utilize UHF female/SO-239 jacks for input and output. Please see the details below for complete power-handling characteristics. Diamond Antenna CX-210A Heavy Duty Wideband Coaxial Switches will usually satisfy your antenna switching requirements. * Frequency: 0-1,000 MHz * Power 0-30 MHz: 1,500 watts CW * Power 30-150 MHz: 1,000 watts CW * Power 150-500 MHz: 500 watts CW * Power 500-1,000 MHz: 250 watts CW * Insertion loss 0- 500 MHz: 0.05 dB * Insertion loss 500-1,000 MHz: 0.1 dB * Isolation 0- 200 MHz: 70 dB * Isolation 200-1,000 MHz: 60 dB * Impedance: 50 ohms * Connector: SO-239 for input and outputs * Size: 2.8 x 1.8 x 3.7 in. * Weight: 15.2 oz.
( 43 )
$59.99
Diamond Antenna CX-310A Heavy Duty Wideband Coaxial Switches
Diamond Antenna CX-310A Heavy Duty Wideband Coaxial Switches are three-position coaxial switches providing very low loss and high isolation. They are rated DC to 800 MHz and can handle up to 1,500 watts at HF frequencies. These switches utilize UHF female/SO-239 jacks for input and output. Please see the details below for complete power-handling characteristics. Diamond Antenna CX-310A Heavy Duty Wideband Coaxial Switches will usually satisfy your antenna switching requirements. * Frequency: 0-800 MHz * Power 0-30 MHz: 1,500 watts * Power 30-150 MHz: 1,000 watts * Power 150-800 MHz: 500 watts * Insertion loss 0- 500 MHz: 0.10 dB * Insertion loss 500-1,000 MHz: 0.15 dB * Impedance: 50 ohms * Connector: SO-239 for input and outputs * Size: 3.3 x 1.5 x 3.75 in. * Weight: 20 oz.
( 35 )
$94.99
Daiwa CS-201GII Coax Switches
Use Daiwa CS-201GII coax switches to switch between one antenna and two radios or two antennas and one radio. These 2-position coaxial switches can handle the power and offer auto grounding of the unused terminal for protection and excellent port isolation. Specs on the Daiwa CS-201GII coax switches are: * Frequency range: (up to) 2 GHz * Power ratings: 1.5 kW CW (up to 30 MHz), 250 W CW (up to 1 GHz), and 150 W CW (up to 2 GHz) * VSWR: below 1.3:1 at 1.3 GHz * Insertion loss: less than 1.2 dB at 1.2 GHz * Isolation: 50 dB 1 GHz * Connector: gold-plated N-type
( 6 )
$71.95
Diamond Antenna CX-210N Heavy Duty Wideband Coaxial Switches
Diamond Antenna CX-210N Heavy Duty Wideband Coaxial Switches are two-position coaxial switches providing very low loss and high isolation. They are rated DC to 3,000 MHz and can handle up to 1,500 watts CW at HF frequencies. These switches utilize Type N connectors for input and output. Please see the details below for complete power-handling characteristics. Diamond Antenna CX-210N Heavy Duty Wideband Coaxial Switches will usually satisfy your antenna switching requirements. * Frequency: 0-3,000 MHz * Power 0- 30 MHz: 1,500 watts CW * Power 30- 150 MHz: 1,000 watts CW * Power 150- 500 MHz: 500 watts CW * Power 500-1,000 MHz: 250 watts CW * Power 1,000-3,000 MHz: 150 watts CW * Insertion loss 0- 500 MHz: 0.05 dB * Insertion loss 500-1,000 MHz: 0.1 dB * Insertion loss 1,000-2,000 MHz: 0.15 dB * Insertion loss 2,000-3,000 MHz: 0.2 dB * Isolation 0- 200 MHz: 70 dB * Isolation 200-1,000 MHz: 60 dB * Isolation 1,000-2,000 MHz: 55 dB * Isolation 2,000-3,000 MHz: 50 dB * Impedance: 50 ohms * Connector: N for input and outputs * Size: 2.8 x 1.8 x 3.7 in. * Weight: 15.2 oz.
( 3 )
$82.99
4O3A S8 Antenna Genius Manual Controllers
4O3A S8 Antenna Genius Manual Controllers are designed to be used with the Antenna Genius, Antenna Switch 8x2, and Power Splitter PS3000RX when no band data or control signal is available from the transceiver or PC, requiring manual switching. It enables manual antenna selection for Antenna Genius, is required for operating the 8x2 switch without a computer or band decoder, and supports manual control of the PS3000RX splitter. For PS3000RX use, the S8 can be modified with a diode matrix to allow selection of single antennas or phased combinations. The controller connects via a 15-pin cable. When used with Antenna Genius, it is powered through pins 9–10. For third-party devices, a 13–15VDC power supply is required (not included).
Not Yet Reviewed
$59.99
Moonraker AV-SW2M Coax Switches
Moonraker AV-SW2M Coax Switches are a 2-position manual switch with low loss characteristics. These heavy-duty switches are used to connect two antennas to one radio, or two radios to one antenna and feature three female SO-239 connectors. The included rubber feet help to minimize movement when placed on a flat surface; and the two self-tapping screws allow the switch to be mounted to most surfaces for a semi-permanent installation. Additional features and specifications: * Three SO-239 connectors * Frequency Range: DC-1000MHz * Insertion Loss: DC-500MHz 0.05dB / 500-1GHz 0.10dB * Isolation DC-500 MHz <= 70 dB / 500-1,00 MHz <= 60 dB * Power Handling: DC-30 MHz - 2,000 W 30-200 MHz - 1,000 W 200-500 MHz - 500 W 500-1000 MHz - 250 W
Not Yet Reviewed
$69.99
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$52.99
—
$99.99
Chelegance JSW-AS02 2-way Coax Switches
Chelegance JSW-AS02 2-way Coax Switches are perfect for connecting two antennas to one radio or two radios to one antenna. Covering a frequency range of DC to 600MHz, this switch covers HF. VHF, and UHF with a power rating up to 1kW. In the center position the common side is attached to ground and a lug is provided for that purpose. With an insertion loss of less than 0.2dB, the radio won't even notice this switch in its path. Mounting lugs mean that this switch can be mounted on a wall or desk and that it will stay where it is placed. Perfect for a base station or a go box with multiple radios. Additional Feature and Specifications: • Frequency Range: DC-600 MHz • Power Rating: 1000 W Max (CW) • Insertion Loss: < 0.2 dB • VSWR: < 1.5:1 (Typical < 1.2:1 from 1.5 – 490 MHz) • Connector type: UHF (SO-239) • Impedance: 50 Ohm
Not Yet Reviewed
$62.99