Availability
Wire Antennas and Parts
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$54.99
—
$97.99
Synthetic Textile Industries Antenna Support Rope
Synthetic Textile Industries Antenna Support Rope is the premium double-braided Dacron/polyester rope that Amateurs and SWLs have been using for years! Available in several sizes and spool lengths, these superior antenna support ropes are not weakened by decay or mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the braided jacket also protects the cord from damage due to ultra-violet light. Order some Antenna Support Rope today, so you will have it on hand for your next antenna project! This rope is perfect for supporting your wire and vertical antennas, but support rope should NOT be used for tower guying. For your tower guying needs, check out our Tower Guy Lines in the Tower Department here at www.DXEngineering.com
( 95 )
$61.99
—
$85.99
Moonraker G5RV Wire Antennas
Moonraker G5RV Wire Antennas have gained popularity as one of the most widely used multi-band antennas worldwide and deliver good overall performance on most HF ham bands when paired with an external tuner. These G5RV antennas feature a high-quality SO-239 molded socket at the end of the ladder line. This design offers a significant advantage by allowing the use of coaxial cable as the entry feedline to your radio equipment. However, it's important to note that some internal tuners may not have the range required to properly tune this antenna.
( 7 )
$71.99
—
$86.99
Alpha Delta Single Band Full Size Dipole Antennas
Alpha Delta Single-Band Full Size Dipole Antennas are pre-assembled half-wave monoband dipole antennas. They are pre-tuned for the lowest indicated frequency and come with the correct amount of mounting rope. These antennas may be tuned for any frequency by shortening the wire lengths according to the supplied instructions. Cut their DX-80 for 60 meters, their DX-40 for 30 meters, and their DX-20 for 17, 15, 12 or 10 meters. They are constructed with a Delta-C Center Insulator with built-in SEP static electricity protectors and are fully assembled using stainless steel hardware, 12-gauge PVC-insulated high-strength solid copper wire, and DELTA-CIN End Insulators. Their center insulators feature SO-239 (UHF female) connectors to accept the PL-259 on your coaxial cables. These antennas will easily handle full legal power. For quality monoband dipoles you can depend on, order Alpha Delta Single-Band Full Size Dipole Antennas from DX Engineering!
( 40 )
$90.99
—
$99.99
DX Engineering Multi-Band Dipole Antennas
DX Engineering Multi-Band Dipole Antennas are designs that are rugged, yet lightweight. Using a tuner, they are usable to 30 MHz and come complete with the wire elements, ladder feedline, center T support, and end mount brackets. These antennas are built using the highest quality components. They use 14 AWG stranded-copper, PVC jacketed elements for flexibility and strength and 100 ft. of 18 AWG 300-ohm 0.88 Velocity Factor ladder lines that are UV-resistant. Stainless steel hardware is included. Often, a 4:1 balun is suggested for multi-band dipoles; however, the best balun to use for this application is a 1:1 ratio. The 1:1 baluns provide better balance, have lower loss, and are more tolerant to load impedance and balance variations than other baluns. A tuner balun is not included in the dipole antenna kits and is available separately. The dipole center T support has pre-drilled holes for the attachment of the wire elements, feedline, and support or messenger lines. The center support top hole is used for the attachment of a "messenger line" that can be strung above the antenna wire and is used to provide support for the antenna wire and feedline. The use of the messenger line, which is strongly recommended but not included, will reduce the stress on the element wires and keep the antenna from stretching over time, which will change its resonant frequency. This line can be thin Synthetic Textile rope available from DX Engineering, which has a high breaking strength. Ideally, it should attach to the same structure used for the dipole, only above it, forming at least a 30 degree angle between the dipole and the messenger line. For further information and to decide the amount of rope you will need, please read the included instructions and check your wire antenna area of construction. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you lack the room for more than one antenna or need a multiband antenna for band agility, consider one of these DX Engineering Multi-Band Dipole Antennas as an elegant and economical solution!
( 30 )
$93.99
Par EndFedz® Antennas
Par EndFedz® Antennas are End Fed Half Wave (EFHW) antennas with the match box coax connection at the end of the wire, for convenient and quick stealth portable operations. These single-band and multi-band antennas can be mounted horizontally, vertically, or as a sloper. No ground plane or counterpoise is needed so portable operation could not be easier. Simply hang the far end from a tree limb or send the wire out a hotel room window or balcony. You can use a telescoping fiberglass mast to get the antenna really high in the air and the supplied end insulators the installation easy. Stealth operation in CC&R and HOA antenna restricted locations is simplified. Their all-black construction makes them difficult to see. Each Par EndFedz® features a UV-resistant black ABS plastic housing with a support rope attachment hole that encloses a matching network to allow the antenna to be fed with standard 50 ohm coaxial cable with a PL-259 (UHF male). All hardware is stainless steel and the SO-239 (UHF female) connector is silver plated and has a PTFE dielectric. The antenna wires are either 18 or 26 AWG stranded Copperweld® with 200 pound breaking strength and a tough, 100% UV stable black polyethylene jacket. One end of the antenna wire has a #10 solder lug making attachment to the matching network feedpoint simple and easily replaceable, if necessary. Standard single and multi-band versions handle 100 or 200 watts and higher power versions handle 300 watts. Lightweight QRP PolyStealth models handle 25 watts and are ideal for portable operation because they are lightweight; the MKII model weighs only 8 ounces and the Trail Friendly model weighs only 3.5 oz. Par EndFedz® Antennas require no counterpoise or extra conductors. The EF-ALLBAND-KW model, about 133 ft. in length, covers eight bands, 80 through 10 meters. The ALLBANDKWJR is 74 ft. in length and operates on five bands, 80-10 meters. The 64 ft. EF-40-10-KW operates on four bands. All three models handle up to 1000 watts SSB/CW and 250 watts AM/Digital Modes. The need for an external tuner may vary based on the antenna model selected and the desired operating band. The manufacturer refers to these antennas as "End-Fed Dipoles" based upon the assertion that a "half-wave radiator is a dipole." This is a variant of the classic definition of a dipole which is a center-fed antenna with two radiating legs running in opposite directions from the feed point. Additional claims about the EFHW state that end feeding a half-wave "can energize the radiator 'nearly' as well as a center-fed." Recent anecdotal measurements indicate that the EFHW radiates about 70% as well as a traditional center-fed dipole. More information is available at each Par EndFedz® model listed below. Order yours from DX Engineering.
( 232 )
$54.99
—
$99.99
Mastrant PWS2P24 Two Point Wire Antenna Support Kits
Mastrant PWS2P24 Two Point Wire Antenna Support Kits are designed for easy and efficient installation of a wire antenna stretched between two points, such as masts, trees, or buildings. These comprehensive kits include everything you need to ensure a safe and reliable antenna installation.
( 1 )
$66.99
DX Engineering TWIG End Fed Half Wave QRP Antenna Kits
DX Engineering TWIG End Fed Half Wave QRP Antenna Kits include the essential components needed to build a lightweight, low-power (QRP) end-fed half-wave antenna for portable and field operations. Ideal for activities such as POTA® and SOTA™, these kits are designed for quick deployment, efficient operation, and minimal equipment requirements. When properly assembled and tuned, TWIG End Fed Half Wave QRP antennas deliver an SWR of less than 2:1 without the need for an antenna tuner and are rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. At the heart of these kits is a 49:1 transformer that matches the high feedpoint impedance of the half-wave radiator to a standard 50-ohm coaxial feedline. The integrated BNC female connector is compatible with recommended coaxial cables and most QRP transceivers. Once the included antenna wire is properly tuned for the desired operating band, an external tuner is typically unnecessary, reducing pack weight and simplifying field operation. No separate counterpoise wire is required, as the coaxial feedline serves this function when installed correctly. To simplify assembly and deployment, the kits feature a built-in quick-connect wire terminal designed for use with the included 24 AWG antenna wire. Two end insulators and attachment clips are also included to provide secure strain relief and convenient field installation. A DX Engineering wire winder and reusable Bongo ties help keep the antenna organized and compact when stored or transported. A typical installation uses a sloper configuration, with the feedpoint positioned approximately 6 to 7 feet above ground level and the antenna wire extending upward to a height of 25 to 30 feet. For optimum performance, a 25- to 35-foot coaxial feedline with BNC connectors is recommended. An optional DXE-LPFC-BNC Feedline Choke installed at the transceiver end of the coax is also recommended to help minimize common-mode current. While the antenna can be deployed in a variety of configurations, final wire lengths may vary depending on the installation method and operating requirements. User assembly is required. Recommended tools and materials include wire cutters, a tape measure, 3/16-inch diameter rope to hang the antenna, electrical tape, a suitable throwing weight for antenna installation, and an antenna analyzer for trimming and tuning the antenna element to the desired operating band.
Not Yet Reviewed
$77.99
DX Engineering Low Power Portable Dipole and Winder Kits
DX Engineering Low Power Portable Dipole and Winder Kits supply the parts for a fun DIY build of a lightweight resonant HF antenna. They are designed for fast portable operations on 40 meters or higher frequency bands. Making your own Single Band or Dual Band Linked Dipole is easy and fun, especially because once they are built, they are designed to repeatedly and quickly unwind, install, make contacts on the air, wind up and go! Typically set up as an Inverted Vee, DXE-LPB1-DWHF series portable dipoles are a perfect match for DX Engineering Nomad Portable Telescopic Masts (sold separately). Great for POTA, SOTA and JOTA, here are some of the best, low-cost DIY antenna kits available for 'on-the-go' amateur radio. Here's what comes in the lightweight DX Engineering Low Power Portable Dipole and Winder Kits: • Center Insulator with a 1:1 Low Power Balun, 50-ohm (max. RF power 250 watts PEP SSB, 100 watts CW or Digital); BNC female right-angle connector pre-installed. • 24 Gauge Stranded Hi-Visibility Yellow Insulated Wire; 80 feet, Two 40 ft. sections. • 4 Link Insulators support the wire and may be used to "break up" the dipole into multiband sections. • 4 Alligator Clips are used two per link, one link per side makes a two band dipole. • 4 Clip Hooks for user supplied rope. • 1 Snap Hook to support the Center Insulator Balun on a Nomad Portable Mast • 3 easy to hold DX Engineering Red Winders for the portable dipole wires and user supplied coaxial cable; Winders have notches and holes for a variety of uses. • One bag of Bongo Ties (available in variety of colors) to secure wires onto Winders. Resonant, low-SWR operation is accommodated on two bands by adding a pair of Band Links. Changing bands is done easily by linking or unlinking pairs of clips on opposite sides of the dipole. With the center of the antenna at 15 to 20 ft. high, and the ends of the dipole a few feet above the ground, the links are easy to reach. Additional band link kits (DXE-LINK-KIT) are available separately to create multiband linked dipole antennas. Each optional Link Kit has the parts for one additional band and contains 2 insulators, 4 'gator clips and 4 clip covers. The Center Insulator 1:1 Balun feedpoint BNC is easily connected with super thin DXE-174VDB or special adapter DXE-8XVDXB DX Engineering Hi-Visibility Orange Coaxial Cables, available in various lengths. Set up at a park or other portable operating site quickly! Get DX Engineering Low Power Portable Dipole and Winder Kits and build up a new pastime!
( 1 )
$84.99
DX Engineering EZ-BUILD® UWA8X Center-T and End Insulator Kits
DX Engineering EZ-BUILD® UWA8X Center-T and End Insulator Kits are designed for building coax fed wire antennas that will be used in medium to low-power operations. These new universal wire antenna building kits include a completely unique coaxial cable connector and feedline strain relief system. All EZ-BUILD® kits also include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments! The DX Engineering EZ-BUILD® Center-T includes a centered, top, 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope. Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals, stainless steel hardware, and a pre-assembled coax pigtail with connector and adapter that accepts your feedline PL-259 (UHF male) connector. The feedline is secured with the exclusive DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the connectors to the strain of the coaxial cable's weight or movement. DX Engineering EZ-BUILD® UWA8X Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V-beam, or loop antennas. This UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels. The UWA213-KIT is the model to use for the construction of a coax fed wire antenna that will be operated at moderate power and high duty cycle modes of operation, such as AM, RTTY, or FM. Use the EZ-BUILD® UWA-KIT for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line. DX Engineering EZ-BUILD® UWA8X Center-T and End Insulator Kits include: -- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes -- Two end insulators featuring the no-loop, no-solder, serpentine grip design -- Two stainless steel wire connection bolts, nuts, and washers -- Four crimp ring terminals for antenna and ladder line wire connections -- One pre-soldered, weather-sealed and tested coaxial connector and adapter assembly -- One aluminum cable strain relief bracket and mounting hardware -- Two strain relief P-clamps with neoprene cushions sized to grip RG-8X without crushing the coaxial cable -- Additional stainless steel hardware for mounting DX Engineering baluns Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are sold separately.
( 8 )
$83.99
REZ Antenna Systems 4-Band Scout Linked Dipole Kits
REZ Antenna Systems 4-Band Scout Linked Dipole Kits are designed for use with the REZ Antennas Scout Base, these DIY kits enable you to create a 4-band linked inverted V dipole antenna, perfect for portable operations like POTA, SOTA, and Field Day. Whether you're a seasoned operator or a newcomer to DIY antennas, these kits provide everything you need to build and fine-tune your own reliable, high-performance antenna.
Not Yet Reviewed
$65.00
DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits
DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits are designed for building coax fed wire antennas that will be used in high power operations. These new universal wire antenna kits include a completely unique coaxial cable connector and feedline strain relief system. All EZ-BUILD® kits also include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments of antenna wire length without soldering! The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope. Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals, stainless steel hardware, and a pre-assembled coax pigtail with connector and adapter that accepts your feedline PL-259 (UHF male) connector. The feedline is secured with the exclusive DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the connectors to the strain of the coaxial cable's weight or movement. DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V Beam, or loop antennas. This UWA213-KIT is the model to use for the construction of an RG-213 or RG-8U coax fed wire antenna that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels. Use the EZ-BUILD® UWA-KIT for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line. DX Engineering EZ-BUILD™ UWA213 Center-T and End Insulator Kits include: -- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes -- Two end insulators featuring the no-loop, no-solder, serpentine grip design -- Two stainless steel wire connection bolts, nuts, and washers. -- Four crimp ring terminals for antenna and ladder line wire connections -- One pre-soldered, weather-sealed and tested coaxial connector and adapter assembly -- One aluminum cable strain relief bracket and mounting hardware -- Two strain relief P-clamps with neoprene cushions sized to grip RG-213 or RG-8U without crushing the coaxial cable -- Additional stainless steel hardware for mounting DX Engineering baluns Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are all sold separately.
( 2 )
$85.99
SOTAbeams Bandspringer Midi HF Portable Antennas
The SOTAbeams Bandspringer Midi HF Portable Wire Antenna is a pre-assembled random length wire antenna with counterpoise. The Bandspringer is designed for the lightweight portable specialist, it is designed to allow you to transmit and receive anywhere you go. General features: * Lightweight * Rated to 125W * Compatible with tapered-pole system or free-strung mounting * Two wire winders included (color may vary) * Two aluminum pegs (tent stakes) included What do you get? The Bandspringer is also supplied with: * Nylon carry bag * Three insulators that can be used to attach the antenna to a pole and to our own pegs (supplied attached) * Two cable ties - to give more attachment options * One 4mm to BNC Adapter * Printed web link to full instructions The Bandspringer Midi consists of two wire elements; both are made of high quality stranded wire, insulated with yellow PVC. This wire type has proved a good compromise between flexibility and performance. The yellow insulating jacket makes it easy to spot on most surfaces which makes handling much easier. The elements for the Bandspringer Midi are 42 ft. (14m). One element is the radiator the other acts as a counterpoise. The wire elements are supplied wound on a Wirewinder for easy deployment and recovery in the field. Each element is terminated in a good quality 4mm "banana plug". The radiating element has a braided nylon cord extension to make it easy to use. The extension is firmly attached to the wire at one end and has a loop at the other end. Enjoy the HF bands anywhere you go with SOTAbeams Bandspringer Midi HF Portable Wire Antennas from DX Engineering!
( 4 )
$52.99
Bushcomm PTS Pigtail Strain Relief Cable Supports
Bushcomm PTS Pigtail Strain Relief Cable Supports are a rugged and practical solution designed for Bushcomm multiwire and single-wire HF antennas. Engineered to suit larger coaxial cables such as RG-213, PTS attaches securely to the balun and provides a coiled "pig tail" channel to wrap the cable, preventing stress on the connector and maintaining a reliable RF connection. Ideal for permanent installations or field setups, the PTS ensures that heavy coax cables remain supported and protected, reducing wear and tear on your antenna system while enhancing long-term performance.
Not Yet Reviewed
$89.99
DX Engineering Single-Band Low Power Dipole Kits
DX Engineering Single-Band Low Power Dipole Kits offer a quick and hassle-free project for Amateur Radio operators, making them an excellent choice for both individual and club activities. The DXE-DWK Dipole Kits are designed for low power operation and come with all the essentials to build a dipole antenna: a center insulator, two end insulators and a right angle BNC connector.
( 5 )
$99.99
DX Engineering TWIG QRP Off Center Fed Dipole Kits
DX Engineering TWIG QRP Off Center Fed Dipole Kits provide everything needed to build lightweight, low-power (QRP) Off Center Fed Dipole (OCF) antennas around the DXE-TWIG-4-1C QRP Current Balun. Designed for portable operating, these kits make it easy to assemble efficient multiband antennas for outdoor activities such as POTA® and SOTA®, as well as other field and portable operations on the 40 through 10-meter amateur bands. When properly constructed, these antennas are rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. At the heart of these kits is the included DXE-TWIG-4-1C balun, which features a 4:1 transformer that converts the approximately 200-ohm impedance of an OCF antenna to the desired 50-ohm impedance required by standard coaxial feedlines. A BNC female connector provides compatibility with recommended coaxial cables and most QRP transceivers. When installed correctly and tuned to the desired operating bands, the included 24 AWG PVC-insulated, stranded copper, high-visibility yellow antenna wire typically eliminates the need for an external antenna tuner. This reduces the amount of gear operators need to carry into the field while allowing for quick band changes and improved operating efficiency. For best performance, a coaxial feedline with BNC connectors (sold separately) measuring approximately 25 to 35 feet is recommended. These antennas can be deployed in a variety of configurations, with final wire lengths varying based on the installation method and operating requirements.
Not Yet Reviewed
$77.99