Availability
Rotator Controllers
Green Heron RT-21-CDE Universal Digital Rotor Controllers
Green Heron RT-21-CDE Universal Digital Rotor Controllers are completely new, extremely advanced and adaptable controllers for your directional antenna rotation systems. Offering the ultimate in operational capabilities, Green Heron RT-21-CDE Universal Digital Rotor Controllers are the best controllers available for your new rotor unit or as a replacement in existing systems. You can add these great features to your existing rotator unit, without even climbing the tower! * Pre-programmed for Hy-Gain and CDE rotator systems * High-visibility LCD display with adjustable backlight brightness * Fully versatile controls for point-and-shoot or manual push button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully supports side mounted antennas, soft limits prevent running into tower * Allows over-travel up to 720 degrees total * Offset control allows center of rotation at any heading, allows N & S center on same mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller! Green Heron RT-21-CDE Universal Digital Rotor Controllers from DX Engineering are pre-programmed specifically for Hy-Gain/CDE HAM-series and T2X (Tailtwister) rotators. However, they are easy to setup for all other rotator units because they are field programmable with convenient, internal, solderless jumpers. Get yours today!
( 6 )
$649.00
DX Engineering Digital Rotator Controllers
DX Engineering Digital Rotator Controllers are completely new, extremely advanced and adaptable controllers for your directional antenna rotation systems. Offering the ultimate in operational capabilities, the RT-21DXE Digital Rotor Controllers are the best controllers available for your new rotor unit or as a replacement in existing systems. The RT-21DXE comes preset for 24 VDC for operation with the DXE-RT4500HD Heavy Duty Rotator, but they are easily adaptable for use with other directional antenna rotation systems because they are field programmable with convenient, internal, solderless jumpers. Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller. Order your DXE-RT-21DXE Digital Rotor Controller from DX Engineering today! DXE-RT-21DXE Additional Features and Specifications: You can add these great features to your existing rotator unit, without even climbing the tower! * Preset for 24 VDC for operation with the DXE-RT4500HD Heavy Duty Rotator * High-visibility LCD display with adjustable backlight brightness * Fully versatile controls for point-and-shoot or manual push-button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully supports side-mounted antennas, soft limits prevent running into the tower * Allows over-travel up to 720 degrees total * Offset control allows the center of rotation at any heading, allows N & S center on the mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$714.99
Yaesu AAA67X021 Replacement Rotator Controllers
Yaesu AAA67X021 Replacement Rotator Controllers keep your antenna turning after controller failure. These controllers are direct replacements for the G-2800DXA, G-1000DXA or G-800DXA rotator systems. These replacement desktop controllers feature a 360 degree radial indication of the actual antenna bearing azimuth. These modern DC controllers support the selection of rotating speeds from 40 to 100 seconds per rotation (360 degrees) for either the G-800DXA or G-1000DXA, or 50 to 120 seconds per rotation (360 degrees) for the G-2800DXA, and can preset a desired heading for the rotator, to which it then turns automatically. With the G-2800DXA, when a fast rotating speed is selected, special "auto slow-start" and "auto slow-stop" features avoid sharp jolts to the antenna array and tower. Activating the rotator causes it to begin turning at slow, but increasing, speed. As the antenna approaches the desired heading, the rotation automatically slows down, before bringing the antenna to a gentle stop. The operator may select the end-of-rotation heading (the compass bearing through which the rotator cannot be turned) most convenient for his location and operation, allowing full rotation through north, south, or both, if desired. In any case, 90 degrees of overlapping rotation allows rotation through the selected stopper heading (450 degrees total rotation). Need a replacement controller for your Yaesu rotator? Order a Yaesu AAA67X021 Replacement Rotator Controller from DX Engineering!
Not Yet Reviewed
$659.99
AALogic DTC-100 Version 6 Rotator Controllers
AALogic DTC-100 Version 6 Rotator Controllers are compatible with digital pulsed feedback rotators such as the Orion 2800, the Alfa SPID, The HyGain DCU-3 compatible rotators, and the DX Engineering RT4500HD. Not only will the DTC-100-V6 work with rotators that have digital pulsed feedback, it will also work with rotators that utilize resistive sensors to determine the orientation of the rotator, Rotators that utilize resistive sensors include Yaesu's G450/G800/G1000/G2800 Series rotators as well as all HyGain Rotators. The DTC-100-V6 also allows the user to set soft rotational limits for both Yaesu and HyGain rotators that incorporate mechanical limits to help keep the rotator from travelling to the mechanical stop. A full color 5-inch touch screen display fills the front panel of the DTC-100-V6. The DTC-100-V6 supports extensive calibration options when it comes to rotators that don't have 'hard limit' switches and even those that do, the user can set soft limits for stopping the rotator before the hard limit switches are set. Once the rotator type has been selected in the calibration screen, the user can set rotation limits for both clockwise and counterclockwise rotation. The configuration of the DTC-100-V6 allows the user to adjust the backlight, the start and stop brake function (needed on HyGain rotators), coast settings, and ramp up and down speeds. These settings allow for control of the rotator as it gets close to the end of its safe rotation, allowing for the rotator to coast to a stop and not jerk to a halt where you want the antenna pointing. Six memories allow the user to set frequently accessed headings to expedite a starting point of the turning the antenna. Memories can also be programmed on an ad hoc basis and not saved to work DX or for some operating event that is outside of the users' normal scope of operation. This allows for flexibility in how the controller is used. The Main operating screen of the DTC-100-V6 provides a graphical representation of where the antenna is facing, saved memories, quick access to the system configuration screen, and controls to manually turn the antenna clockwise and counterclockwise as well as stopping the rotation. The display also shows if the rotator has spun into the overlap zone, and if there is remote control of the DTC-100. The rear panel of the DTC-100-V6 includes an 8-pin terminal block, a 3.5mm TRS jack for an optional RS232TTL adapter, standard IEC-320 connector block, with fuse and power switch. A 6 foot long, 110VAC power cord is included. Also included is the mating connector for the terminal block. If you already have the line to your rotator terminated for the controller that came with your rotator, there are optional cables available for both Yaesu and HyGain rotators that allow the use of cables that are already terminated with the connectors for the vendor supplied rotator controllers and you don't wish to remove the termination to use the DTC-100-V6. Additional Feature and Specifications: • Computer interface for logging programs • Computerized motor control • Auto brake release/engage • Speed ramp up/down for smooth start/stop • Variable coast control • Pinpoint accuracy • Automated calibration for simple installation • Supports pulsed feedback sensors • User ability to set soft limits
Not Yet Reviewed
$750.00
Green Heron RT-21-M2 Universal Digital Rotor Controllers
Green Heron RT-21-M2 Universal Digital Rotor Controllers are completely new, extremely advanced and adaptable controllers for your directional antenna rotation systems. Offering the ultimate in operational capabilities, Green Heron RT-21-M2 Universal Digital Rotor Controllers are the best controllers available for your new rotor unit or as a replacement in existing systems. You can add these great features to your existing rotator unit, without even climbing the tower! * Pre-programmed for M2 Antennas rotator systems * High-visibility LCD display with adjustable backlight brightness * Fully versatile controls for point-and-shoot or manual push button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully supports side mounted antennas, soft limits prevent running into tower * Allows over-travel up to 720 degrees total * Offset control allows center of rotation at any heading, allows N and S center on same mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller! Green Heron RT-21-M2 Universal Digital Rotor Controllers from DX Engineering are pre-programmed specifically for M2 Antennas rotators. However, they are easy to setup for all other rotator units because they are field programmable with convenient, internal, solderless jumpers. Get yours today!
( 6 )
$649.00