Availability
HF Beam Antennas
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$539.99
—
$559.99
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 3 )
$525.99
—
$569.99
DX Engineering PRO-STACK Broadband Antenna Phasing Switches
DX Engineering PRO-STACK Broadband Antenna Phasing Switches are newly designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced operation. There is no need for coaxial delay lines with the DX Engineering PRO-STACK switches. Just connect your antennas to the phasing switch controller with equal-length 50 ohm lines. PRO-STACK switch units are available with high-quality PTFE-silver plated SO-239 (UHF female) connectors. These relay units are 1-of-3 source voltage controlled at 12-15VDC over a four conductor cable. A matching Control Console is available separately or is included in the PRO-STACK System. These phasing switches can be used for any applications that require the following four basic antenna feed selections: both antenna ports in-phase, both antenna ports out-of-phase, antenna port 1 only, and antenna port 2 only. The default is both output ports in-phase. Impedance matching automatically changes when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically greater than 1/2-wavelength free space. Since the DX Engineering PRO-STACK Broadband Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of two, and then using a third DX Engineering control console to combine the first two sets. PRO-STACK switches can also be used to feed three quarter wave resonant vertical antennas for a high-gain 4-pattern array. In this arrangement, the center #2 passive element is directly grounded to a good ground radial system at all times, while the end elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in Documentation. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Switches include these great features: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High-impact RF shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12 VDC relay operation, even on battery or solar power * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly
( 1 )
$699.99
—
$740.00
QRO.cz Stack Match High Power Broadband Antenna Phasing Switches
QRO.cz Stack Match High Power Broadband Antenna Phasing Switches are high-performance broadband antenna combiner designed to impedance match two Yagi antennas to a single transceiver (TRX). Ideal for mono-band, tri-band, or multi-band antenna systems, they support both in-phase (BiP) and out-of-phase (BoP) configurations, enabling advanced stacking and phasing configurations. Whether you're optimizing a contest station or enhancing DX performance, these Stack Match 1-2 switches allow seamless switching between upper, lower, BiP, and BoP modes. Built with high-quality components and housed in a rugged aluminum enclosure makes them a reliable choice for demanding HF operations.
Not Yet Reviewed
$559.99
InnovAntennas 10M and 6M Yagi Antennas
InnovAntennas 10M and 6M Yagi Antennas are a new series of gain-optimized two-band beams designed with the latest software. They feature a single coax feed system, ideal for modern transceivers with HF plus 6 meters. Different versions of these 28 and 50 MHz Yagi beams are available to suit every station and budget, depending upon boom length and element counts. Interlaced elements allow short and medium-length boom versions that are perfect for stations with limited space, simpler supports and smaller rotators, while the long boom versions satisfy the top enthusiasts. Dedicated to the bands where propagation changes quickly, InnovAntennas 10M and 6M Yagi Antennas offer excellent performance and rugged reliability, to take advantage of every opening.
( 1 )
$535.99
—
$699.99
EAntennas 11m LFA Yagi Antennas
EAntenna 11m LFA Yagi Antennas are 4 element loop fed Yagi Antennas. These directional antennas are compact and feature an impressive 21.3 dB of Front to Back Ratio and 9.1dBi of gain. The included balun allows this antenna to handle up to 3kW of power. The 1.57 x 1.57 in. square boom is 17.06 ft. in length and the antenna mounts to the mast at the center of the boom. Weighing 24.46 pounds, a small rotator can turn the antenna. The maximum windspeed that the antenna can withstand is 99.4 Mph.
Not Yet Reviewed
$695.99
Diex 5 Element 6-meter Monoband Full Size Yagi Antennas
Diex 5 Element 6-meter Monoband Full Size Yagi Antennas are full sized directional antennas for the 6-meter amateur band. Expertly engineered and crafted in Brazil from quality aluminum tubing and durable materials, these antennas are built to endure harsh environments while providing long-lasting, high-performance operation. With a power rating of up to 2000 Watts PEP, these antennas are ready for demanding applications. Offering 10.74 dBi of gain and greater than 500 kHz of bandwidth at less than 2:1 SWR, this monoband antenna will help your signal reach further – whether across the country or around the globe. Designed for efficiency, this 5 Element Monoband will get your signal further and let you chase far away DX.
Not Yet Reviewed
$679.99
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of a single HF band that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique single-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes for the 20, 30 and 60M models, 1000W PEP for 80M and 1500W PEP for 40M, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 7 )
$679.99
InnovAntennas High HF Band Optimized Log Periodic Arrays
InnovAntennas High HF Band Optimized Log Periodic Arrays (BOLPA) are unique directional antennas that cover the high HF bands. Rather than sizing and distributing all elements to provide uniform performance everywhere, the BOLPA has been optimized to provide the highest performance within the Amateur Radio bands, resulting in exceptional performance across the entire covered bands. With a direct 50-ohm feed point, the overall front-to-back ratio and antenna gain is significantly improved compared to conventional 200-ohm LPDAs. Designer Justin Johnson, G0KSC, describes the BOLPA design in more detail in the "ARRL Antenna Book." If you want a high HF beam antenna that lasts and performs in all weather conditions, without SWR or bandwidth shifting, order one of the BOLPA listed here! BOLPA-4 The BOLPA-4 is brand new and offers the advantages of the BOLPA for those who have less space. The BOLPA-4 has a twin-boom length of 18 ft. (5.5 m) made of 1.25 in. square tubing, with only 4 elements, but fully covers the 15 meter band and the 24.8 – 30 MHz range, including the 12, 11 and 10 meters bands. Like all BOLPAs, the BOLPA-4 has a direct feed point impedance of 50 ohms and is a super heavy duty antenna that will survive wind speeds in excess of 100 mph (160km/h). SWR Sweep is 1.5:1 or under for the entire 9 MHz frequency range - No antenna tuner or matching is needed! BOLPA-3 The BOLPA-3 is manufactured on a much smaller boom and is therefore the logical choice for lightweight masts. The BOLPA-3 has an 11.5 ft. (3.5 m) twin-boom made of square 1.0 in, tubing and covers 24.8 MHz to 30 MHz without gaps, including the 12, 11 and 10 meters bands. So it is an excellent choice for those who want something for the upper HF bands for the current solar peak. SWR Sweep is well below 1.5:1 for the entire 6 MHz frequency range - No tuner or matching is needed! BOLPA-2 The BOLPA-2 is a very compact version of this antenna type with only a 7.9 ft. (2.4 m) boom and 2 elements. The BOLPA-2 covers the 11m and 10m band. Even on 12m the antenna can still be operated with a tuner and still has around 4.5 dBi on this band. If the space on the mast is limited, but 10m is a must, the BOLPA-2 is the right choice. SWR Sweep is 1.5:1 or under for the entire frequency range - No tuner or matching is needed!
Not Yet Reviewed
$665.99
Diex 3 Element Monoband Full Size Yagi Antennas
Diex 3 Element Monoband Full Size Dipole Antennas are full sized directional antennas covering the 20 through 6-meter amateur bands. Expertly engineered and crafted in Brazil from quality aluminum tubing and durable materials, these antennas are built to endure harsh environments while providing long-lasting, high-performance operation. With a power rating of up to 2000 Watts PEP, these antennas are ready for demanding applications. Offering at least 8 dBi of gain and greater than 500 kHz of bandwidth at less than 2:1 SWR, these monoband antennas will help your signal reach further – whether across the country or around the globe. Designed for efficiency, these 3 Element Monoband will get your signal further and let you chase far away DX.
( 3 )
$565.99
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams from G0KSC represents significant development of LFA Yagis with a substantial difference: LFA-Q (Loop Fed Array Quad) Beams use top and bottom booms with through-boom LFA Yagi-style loops arranged vertically for every element. This very rugged design achieves better gain for a given length of boom and much lower noise for better signal quality compared to conventional Yagi antennas. InnovAntenna LFA-Q quad structure provides high directivity, eliminating unwanted spurious radiation. They achieve great side and rear rejection while retaining excellent gain, front-to-back and SWR bandwidth across the band. These are amazingly compact, high gain directional antennas, constructed to withstand serious weather conditions! Antennas of this series can be built and tuned to operate on a 500 kHz section of the 10 meter 28 MHz Amateur Band or on the 11 meter 27 MHz Citizens Band. The desired band is easily selected by changing the length of the outer element sections during construction – exact dimensions are provided in the instructions. The driven loop element feedpoint impedance is 50 ohms which allows a direct feed at high transmitting power. Vertical stacking of two or more antennas can significantly increase directivity, gain and signal quality; an interesting alternative when available space prevents the installation of long boom beam antennas. Just like other HF quads, LFA-Q vertical loop-fed quads are inherently quieter than a Yagi of the same size, making them a perfect choice for use in any location with high ambient noise level, such as a city or densely populated neighborhood. There is a 10M or 11M LFA-Q Loop-Fed Quad Beam version that matches your space, support, and wallet: - The 2-element economy version has loop spacing booms of only 2.3 ft. (70 cm); - The 3-element compact version booms are 10.5 ft. (3.2m) in length: - The 4-element performance model boom lengths are 26.9 ft. (8.2 m). Each LFA-Q is very stable mechanically, with mast clamps on each boom, top and bottom! Thanks to the use of high-quality materials, extensive modeling and testing, the durability and reliable performance of InnovAntennas 10M or 11M Loop-Fed Quad Beams is undeniable.
Not Yet Reviewed
$519.99
InnovAntennas OP-DES Opposing Phase Driven Element System HF Yagis
InnovAntennas OP-DES Opposing Phase Driven Element System HF Yagis are a relatively new development by InnovAntennas. The ends of the driven element of these antennas are angled backwards, parallel to the boom. The opposing phase relationships in them achieves a very clean directional pattern with few side lobes. The resulting performance includes very good gain over a wide frequency range, along with a very good front-to-back ratio. These monoband beams antennas are available in a variety of boom lengths and element counts, to fit in with each operator's needs and their budget. Feature and Benefits of the InnovAntennas Monoband OP-DES Yagis: • Have bent driven elements to dramatically reduce side lobes and to help provide with constant performance characteristics • Super Wide Bandwidth - the broadest SWR, gain and f/b bandwidth of all our antennas, the OP-DES is best suited to HF applications where performance and a wide frequency range of low-SWR are needed in a single package. • High F/B ratio as with the LFA and OWL, the OP-DES Yagi has an exceptional Front to Back ratio for a direct-feed, 50Ω Yagi, which suppresses unwanted signals from behind your antenna! • Constant Impedance & 'All-Weather' Stability – Similar to the LFA and OWL, the OP-DES Yagi is able to maintain impedance in wet weather and therefore will not de-tune like other antennas can • 50-ohm Direct Feed - No Matching Loss - The OP-DES Yagi has been computer optimized with the 'bent' driven element in place to ensure a 50 ohm feed-point with no matching loss and minimal resistive loss • Class-Leading Direct Feed Yagi Performance - For a given boom length, the OP-DES Yagi provides superior all-round performance as compared to any other HF direct feed Yagi • Simple SWR Fine-Tuning Feature - No two locations for an antenna are the same. With this in mind the requirements of the perfectionist as well as the everyday user in our sights, the driven element of the OP-DES has adjustable end sections to allow for very simple SWR fine-tuning The most important part of your receiver - the antenna - has to be the best part. The antenna is considered the most important part of your station. After spending thousands on radio equipment, don't short-change the station by choosing anything less than the InnovAntennas OP-DES HF Yagi.
Not Yet Reviewed
$569.99
InnovAntennas Moxon Directional Antennas
InnovAntennas Moxon Directional Antennas are mono-band, two element directional antennas with the ends bent toward each other. The gap between the elements is bridged by a non-conductive rod to give the antenna stability. The result is a directional antenna that is compact and of a relatively simple design, providing directionality and a very good front-to-back ratio. Available in versions for 10/11 Meters, 12 Meters, 15 Meters, 17 Meters, and 20 Meters, these compact antennas are a solution when you require directionality and don't have a lot of room. The InnovAntennas Moxon antennas are rated for up to 7,000 Watts and range from eleven pounds to twenty-two pounds in weight, meaning a small tower or mast will be sufficient to hold the antenna and not much in the way of a rotator will be needed. The InnovAntennas Moxon Directional Antennas require no balun and present a balanced 50-ohm load to the radio, connection of the coax to the antenna is carried out by way of screw terminals on the antenna. The Antenna is rated to survive in 99 Mph winds.
Not Yet Reviewed
$649.99
—
$682.99
Momobeam DUO7 6/10 Dual Band HF Yagi Antennas
Momobeam DUO7 6/10 Dual Band HF Yagi Antennas are compact dual-band HF Yagi antennas designed for the10-Meter (28MHz) and 6-Meter (50MHz) amateur bands. With a lightweight build of just 17.6lbs. and a compact length of only 6.88ft., it's ideal for portable operations and installations in limited spaces. The DUO7 6/10 offers a hassle-free setup with no calibration required and delivers excellent performance, maintaining SWR below 1.5:1 across both bands—making it an ideal match for modern transceivers and linear amplifiers. This antenna features a no-compromise design with 4 elements on 50MHz and 3 elements on 28MHz, all fed through a single feed point using just one coaxial cable. Assembly is simple and intuitive thanks to its round boom construction, clearly labeled aluminum tubes, and hardware packaged in separate, labeled bags.
Not Yet Reviewed
$605.99