Filters
3 Results Found For "Stack"
DX Engineering PRO-STACK Broadband Antenna Phasing Switches
DX Engineering PRO-STACK Broadband Antenna Phasing Switches are newly designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced operation. There is no need for coaxial delay lines with the DX Engineering PRO-STACK switches. Just connect your antennas to the phasing switch controller with equal-length 50 ohm lines. PRO-STACK switch units are available with high-quality PTFE-silver plated SO-239 (UHF female) connectors. These relay units are 1-of-3 source voltage controlled at 12-15VDC over a four conductor cable. A matching Control Console is available separately or is included in the PRO-STACK System. These phasing switches can be used for any applications that require the following four basic antenna feed selections: both antenna ports in-phase, both antenna ports out-of-phase, antenna port 1 only, and antenna port 2 only. The default is both output ports in-phase. Impedance matching automatically changes when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically greater than 1/2-wavelength free space. Since the DX Engineering PRO-STACK Broadband Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of two, and then using a third DX Engineering control console to combine the first two sets. PRO-STACK switches can also be used to feed three quarter wave resonant vertical antennas for a high-gain 4-pattern array. In this arrangement, the center #2 passive element is directly grounded to a good ground radial system at all times, while the end elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in Documentation. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Switches include these great features: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High-impact RF shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12 VDC relay operation, even on battery or solar power * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly
( 1 )
$699.99
—
$740.00
QRO.cz Stack Match High Power Broadband Antenna Phasing Switches
QRO.cz Stack Match High Power Broadband Antenna Phasing Switches are high-performance broadband antenna combiner designed to impedance match two Yagi antennas to a single transceiver (TRX). Ideal for mono-band, tri-band, or multi-band antenna systems, they support both in-phase (BiP) and out-of-phase (BoP) configurations, enabling advanced stacking and phasing configurations. Whether you're optimizing a contest station or enhancing DX performance, these Stack Match 1-2 switches allow seamless switching between upper, lower, BiP, and BoP modes. Built with high-quality components and housed in a rugged aluminum enclosure makes them a reliable choice for demanding HF operations.
Not Yet Reviewed
$559.99
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams
InnovAntennas 10M or 11M LFA-Q Loop-Fed Quad Beams from G0KSC represents significant development of LFA Yagis with a substantial difference: LFA-Q (Loop Fed Array Quad) Beams use top and bottom booms with through-boom LFA Yagi-style loops arranged vertically for every element. This very rugged design achieves better gain for a given length of boom and much lower noise for better signal quality compared to conventional Yagi antennas. InnovAntenna LFA-Q quad structure provides high directivity, eliminating unwanted spurious radiation. They achieve great side and rear rejection while retaining excellent gain, front-to-back and SWR bandwidth across the band. These are amazingly compact, high gain directional antennas, constructed to withstand serious weather conditions! Antennas of this series can be built and tuned to operate on a 500 kHz section of the 10 meter 28 MHz Amateur Band or on the 11 meter 27 MHz Citizens Band. The desired band is easily selected by changing the length of the outer element sections during construction – exact dimensions are provided in the instructions. The driven loop element feedpoint impedance is 50 ohms which allows a direct feed at high transmitting power. Vertical stacking of two or more antennas can significantly increase directivity, gain and signal quality; an interesting alternative when available space prevents the installation of long boom beam antennas. Just like other HF quads, LFA-Q vertical loop-fed quads are inherently quieter than a Yagi of the same size, making them a perfect choice for use in any location with high ambient noise level, such as a city or densely populated neighborhood. There is a 10M or 11M LFA-Q Loop-Fed Quad Beam version that matches your space, support, and wallet: - The 2-element economy version has loop spacing booms of only 2.3 ft. (70 cm); - The 3-element compact version booms are 10.5 ft. (3.2m) in length: - The 4-element performance model boom lengths are 26.9 ft. (8.2 m). Each LFA-Q is very stable mechanically, with mast clamps on each boom, top and bottom! Thanks to the use of high-quality materials, extensive modeling and testing, the durability and reliable performance of InnovAntennas 10M or 11M Loop-Fed Quad Beams is undeniable.
Not Yet Reviewed
$519.99