Availability
VHF/UHF Preamplifiers
I0JXX Mast Mount Low Noise Preamplifiers
I0JXX Mast Mount Low Noise Preamplifiers offer high gain amplification with excellent noise figures in VHF and UHF amateur band optimized devices for casual operation or contest-grade directional antenna systems. Built for long-term tower top use, two high-power SPDT coaxial relays are used to protect the internal, band-specific I0JXX LNA using low-loss and high-isolation interconnections. These exceptional components are housed in a specialized weather and UV resistant polyamide black case with a drip edge surrounding two downward facing Type N female connectors mounted on a rugged, 12 gauge (2mm) aluminum panel. A separate female BNC is for DC power and control voltage, intended to be sent from the required sequencer via an inexpensive coaxial cable. Extraordinary receive-transmit-receive changeover performance is achieved by these compact 12VDC mast mounted units. Their internal LNA (low noise amplifiers) offer preamplification using ultra-low noise components as good or better than a typical receiver front end, which preserves the capabilities of a low-noise antenna or stacked array and the transceive system. The internal relays are connected to bypass the internal preamplifier when power is removed. An I0JXX SEQJXXBOX Sequencer can be used to control the I0JXX Mast Mount Low Noise Preamplifiers for two-way VHF or UHF communications. I0JXX Mast Mount Low Noise Preamplifiers are built with high quality components for many years of service. View the band unit specific specifications on each part detail page.
Not Yet Reviewed
$700.99
SSB Electronic LNA Series Low-Noise Preamplifiers
SSB Electronic LNA Series Low-Noise Preamplifiers are newly developed low-noise receiving amplifiers for the 6m, 2m and 70cm bands, featuring super low noise with high gain, making them ideal for use in EME (moon bounce), MS (meteor scatter), Aurora and tropo-DX operations. High performance is reflected in exceptional IP3 test figures (35dBm, typical), to provide strong signal immunity. Very good rejection of strong signals near and far guarantees interference-free operation, even in the vicinity of other radio transmissions from commercial and broadcast stations as well as mobile carriers. The input circuit of the amplifier is built with high quality components in a chamber construction, optimized for the best noise characteristics. The bandpass at the output of the amplifier ensures very good in-band selection with signals outside the pass band effectively suppressed. The LNA Series Preamplifiers do not have RX/TX relays and are intended for receiving applications. LNA Series Preamplifiers are built in a sturdy tinplate housing, suitable exclusively for indoor applications (Ip41 to DIN EN 60529). Choose between models that have two Type-N female connectors, Type-N Male and Female, and SMA female. These amplifiers can be powered via an external cable or via a coaxial bias tee (remote power supply). The -MA weatherproof variant of the receive-only LNA series is characterized by a robust, IP44-protected housing, allowing the high-quality preamplifier to be mast-mounted close to the antenna using Type-N connectors only. Power is supplied exclusively over the coax. If your receiver does not output 12-15 VDC receive preamplifier power onto the antenna feedline, use the SSB Electronic DCC-5000PRO Bias Tee (remote power inserter).
Not Yet Reviewed
$502.99
SSB Electronic Mast-Mount Preamplifiers
SSB Electronic Mast-Mount Preamplifiers are low-noise, band-specific, weatherproof preamplifiers designed for installation near VHF and UHF antennas. Available for the 6 meter, 4 meter (Europe), 2 meter and 70 cm Amateur bands, these preamplifiers are installed in-line, at the antenna. They improve receive performance by amplifying weak signals before feedline loss can reduce them. Powering and Sequencing Most models can be powered remotely through the coaxial cable, and many modern transceivers include a built-in bias-tee for mast-mounted preamplifiers. If the transceiver or transverter system does not provide power, an external bias-tee or remote-feed unit is required. • The DCW-15 and DCW 2004B provide sequencing support. • The DCC-12 does not provide sequencing. • SP series preamplifiers include a built-in RF VOX circuit for safe operations up to 100 watts; for transmit power above 100 watts, PTT control with a sequencer is required. Some models require a direct DC connection (UHF female). • -S series preamplifiers feature lower current signal relays with slightly higher insertion loss. • MHP and MHP-S series preamplifiers versions require sequencer control (see below). Signal Filtering and Switching Built-in helix filters effectively reject out-of-band signals, helping maintain clean receive performance. Real coaxial relays handle transmit/receive switching, resulting in very low insertion loss (except for SP-S series). And each amplifier is carefully calibrated at multiple test stations before packaging. Dual-Band Models Dual-band models include built-in diplexers, so they require only one connection for the multiband antenna and one connection for the station coaxial cable. MHP Series for Demanding Stations The MHP series is designed for demanding operating environments and provides higher gain for weak-signal modes such as Tropo-DX and EME. With maximum transmit power handling of 1500 watts on 6m and 2000 watts on 2m and 70cm, these preamplifiers are well suited for contesting, DX, and EME operation. Important Note for MHP Models Bias-tee power (on the RF coax) is not supported in most MHP Preamplifiers. They must be powered directly using the appropriate cable size for the required distance, and they may only be operated with a correctly wired sequencer, such as the DCW 2004 B Sequence Controller. Transmitting high power without a directly wired sequencer is likely to damage the MHP preamplifier. Housing and Hardware All SSB Electronic Mast-Mount Preamplifiers are supplied in UV-resistant, weatherproof housings with Type N female connectors. Hot-dip galvanized clamps and stainless steel mounting hardware are included. See individual models for band coverage and detailed specifications.
Not Yet Reviewed
$534.99
—
$711.99