Selected Filters


Availability


5 Results Found For "75 ohm coax"

Part Groups

Results 1 - 5 of 5

Unified Microsystems BevFlex-4X and BevFlex-4X/Q Reversible Receive Antenna System

Unified Microsystems BevFlex-4X Reversible Receive Antenna System is a very versatile two-direction low band receiving antenna. This is the updated and improved version of the W8GNM revolutionary design that uses only low cost, low loss RG-6 for the elements and the feedline of a Reversible Beverage antenna or Reversible Beverage on Ground antenna. Plus, it uses specially designed transformer units that allow the feedpoint unit to be placed anywhere along the length of the Reversible Beverage or BOG, instead of only at one end or the other. Like for other Beverage antennas, the Elevated Beverage or a Beverage on Ground (BOG), the performance of the reversible BevFlex-4X system depends upon the length of the user supplied RG-6 coax for the antenna element. Also, the versatile BevFlex-4X components may be used to create a two-direction version of any one of these antennas, using a much shorter length of wire for the receiving element: * EWE * Flag * VE3DO Loop BevFlex-4X Systems consist of four components; one Feed Unit, two Terminator Units and one Control Switch Unit. The Feed and Terminal Units are house in NEMA rated enclosures and use stainless steel hardware for maximum weather protection. Do you need enhanced reception in four directions? The BevFlex-4X/Q combines two sets of Terminator and Feed Units with the RAS-4 remote antenna switch to let you hear better in all four quadrants. The BevFlex-4X antennas can be any mix of Beverage, BOG, Flag, EWE, or VE3DO. The included RAS-4 Remote Antenna Switch only requires a single coax and four wire control cable to the shack. NOTE: An in-shack four direction switch control box is not included. Choose a control console from DX Engineering, EA4TX and others, or build your own. Just add RG-6 coax and ground rods! Click "More Details" and the Brochure link at the Documentation tab to see pdf diagrams of all of these two and four-direction BevFlex receive antenna system connections. Depending upon the real estate you have available, the FAQ chart will help you choose the Unified Microsystems BevFlex-4X or BevFlex-4X/Q configuration that fits your property and your low band reception needs!

4.93 out of 5 stars ( 15 )

$649.95

InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas

InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are an exciting development for the fascinating hobby of long distance (DX) reception of free, over-the-air broadcast FM radio. The OP-DES Yagi directional antennas are specially designed for better gain, great front-to-back and patterns with fewer side lobes, to dramatically improve your reception experience by helping your tuner or receiver achieve a new level of performance. For FM DX enthusiasts who own great FM Tuners and Receivers, pulling in new distant stations at full quieting is thrilling. Capturing a weak station while rejecting an on-channel stronger station can be especially gratifying. Hearing distant fringe and local stations at full fidelity without noise is the ultimate goal for FM audiophiles as well as FM DXers. Even HD Radio enthusiasts can increase their channel count with full sound quality and fewer dropouts. One of the distinctive design features of the OP-DES Yagi Antennas is a low feedpoint impedance that allows either 50 ohm or 75 ohm coaxial cable to be connected directly to the driven element, eliminating the losses of a transformer balun. With several boom lengths available, for the FM enthusiast on a budget, for the casual listener with a treasured vintage receiver, and for the most discerning FM Tuner audiophile, best-ever reception is possible with an InnovAntenna FM Broadcast OP-DES Yagi. InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are available as: IVA-18484-0108 Compact and Space-Saving 8 element, 6.5 ft. boom, 9 to 10 dBi gain, typ. 24 dB f/b IVA-18484-0145 Cost-Effective Performance 11 element 12 ft. boom, 9.8 to 12.6 dBi gain, typ. 25 dB f/b IVA-18484-0110 High Performance 14 element, 18 ft. trussed boom, 10-13 dBi gain, 20 to 42 dB f/b IVA-18484-0112 Ultimate Performance 18-element, 24 ft. trussed boom, 11-14 dBi gain, 20 to 44 dB f/b Choose the InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antenna that is right for you. Immerse yourself in a world of music, news and entertainment and discover a clarity and fidelity that you never heard before on your FM Tuner or Stereo Receiver.

5.0 out of 5 stars ( 2 )

$549.99

—

$735.99

COMTEK ACB-4 Hybrid Four-Square Systems

COMTEK ACB-4 Hybrid Four-Square Systems are phased array Relay Units and Control Consoles that are affordable, simple to install, and easy to use. A four-square phased array consists of four mono-band resonant elements fed in phase relationships and power ratios that produce a directional cardioid pattern. Four-square arrays offer up to 5 dB of forward gain and fantastic front-to-back rejection over 25 dB! COMTEK ACB-4 Hybrid Four-Square Systems are designed for use with four quarter-wave ground mounted verticals, spaced one-quarter free space wavelength on the side of the square, with complete ground radial systems. Properly installed with quarter-wave 75-ohm phasing feedlines, the Four Square provides an excellent cardioid pattern that is steerable to the four directions of the corners of the four square array. Ground-mounted vertical arrays are easier to build and less costly to maintain than towers and beam antennas. Four-Square arrays are a practical solution for building a high performance directional HF antenna system, especially for Low Band DXing and contesting. Click the "More Details" link for more information on COMTEK ACB-4 Hybrid Four-Square Systems. COMTEK ACB-4 Hybrid Four-Square Relay Units are single-band phasing and relay devices. They are typically in stock for every major HF contesting Amateur band, and for 30 meters. The 60 meter band is available by special order. Four-Square arrays are single band specific, due to antenna spacing and phasing feedline lengths, for proper phasing and patterns. DX Engineering offers a full line of 75 ohm Phasing and 50 ohm feedline coaxial cables, control cables, antennas and accessories for your phased-array installation. The COMTEK ACB Series Hybrid Units also require a good 50 ohm, non-inductive dummy load. The electronically and mechanically improved COMTEK ACB-4 Hybrid Four-Square Systems now include the new COMTEK ACB-4A Four-Square Control Console. Specially designed to be useful as replacements for existing COMTEK ACB Hybrid four-square antenna systems, ACB-4A control consoles now feature a 13.8 VDC input to be easily integrated into all stations, including those that can be run on 12V DC emergency power. Their front panels have four-position rotary switches and four label pads and LEDs to indicate the array directional positions. The COMTEK ACB-4A Four-Square Control Console is ready to control your COMTEK Hybrid Array with low-cost three conductor control cable. COMTEK ACB-4 Hybrid Four-Square Systems include the Hybrid Relay Units with these features: * 2 kW rating for Amateur SSB and CW * 15 amp gold plated contact relays with dust covers * PTFE silver stranded wire over fiberglass tape-wound toroids * Balanced temperature, frequency, and voltage stable capacitors * Double-sided printed circuit board * MOVs for lightning surge protection with RF bypass caps * Brushed aluminum Z-chassis and cover with riveted seams * Mounting clamp included Regardless of the band you choose, COMTEK ACB-4 Hybrid Four-Square Systems from DX Engineering will help you rack up the contacts!

5.0 out of 5 stars ( 2 )

$569.98

—

$709.98

DX Engineering Reversible Beverage Antenna System Combos

DX Engineering Reversible Beverage Antenna System Combos allow two Beverage antennas to be switched to receive in opposite directions while sharing the same physical space. These exciting new reversible Beverage combos include DX Engineering's superb receive preamp! Dramatically improved weak signal results can be achieved on MW, BCB, 160, 80 and 40 meter bands and shortwave bands with receive-only Beverage wire antennas that are typically 350 to 800 feet long, depending upon the lowest band of interest. DX Engineering Reversible Beverage System Combos are immune to the strong signal overload and core saturation common in multi-transmitter contesting environments. Reversible Beverages have two antenna F connectors; one "Away" port for the default end-fire receiving pattern off the end of the wire, and one "Toward" port for the opposite direction. Applying a negative 10 to 18 V DC to the feedline switches the system between the two antenna ports for reception in opposite directions. You can build a 4-direction receive antenna system with two reversible Beverage systems and one DX Engineering RLS-2 Two-Port Receiving Switch that also requires only one feedline! The optional DX Engineering Feedline Voltage Coupler, model DXE-FVC-1 is highly recommended to provide all of the required feedline voltage injection. Plus, the optional DXE-EC-4 BCD Control Console completes the system for four-direction switching right in the shack. These RBS systems will work with any 300-600 ohm 2-wire line. For best low-loss low-noise results, use DX Engineering flooded or quad-shielded 75-ohm coax; with our F-type compression connectors to ensure a weatherproof installation. DX Engineering RPA-1 Receive Preamplifiers use RCA-type phono jacks and CATV Type-F female connectors for the input and output connections to prevent accidental connection to transmitting devices. RPA-1 Receive Preamplifiers feature a built-in relay that automatically bypasses the preamplifier circuit when DC power is removed. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 V DC input. Details for DX Engineering Reversible Beverage Antenna System Combos: Receive preamp: * Gain: 16 dB, +/- 1.5 dB, from 300 kHz through 35 MHz * Dynamic range (IM3) at 500 Hz BW: 110 dB or greater * Output Third Order Intercept: +43 dBm * Noise figure: 3.5 dB * Compression: 1 dB at +26 dBm (nominally 0.4 W output) * Power requirement: 12-18 V DC at 140 mA maximum * Power Input: 2.1 mm DC coaxial power connector Reversible Beverage transformer features: * Broad operating range, 0.2 to 30 MHz * Fully isolated grounds prevent common-made noise and unwanted signals * 75 ohm design enables the use of high quality, low cost cable and connectors * RF shielded housing used for isolation and improved life * Directional Switching Voltage: nominal 12 V AC or negative 12 V DC, feedline injected * Directional Switching Current: less than 80 mA * Antenna impedance: 300-600 ohm (450 ohm recommended) * Feedline impedance: 50-75 ohm (75 ohm recommended) * RBSA-1FP Feed Point unit dimensions: 5.5 in. width x 3.5 in. depth x 1.5 in. height * RBS-1RT Reflection Transformer unit dimensions: 2.125 in. width x 2.125 in. depth x 1.125 in. height Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Reversible Beverage Antenna System Combos offer package convenience and superior receiving results on today's crowded medium and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the exceptional performance of DX Engineering products. Order one of these DX Engineering Reversible Beverage Antenna System Combos to make the best of your MW/HF reception!

Not Yet Reviewed

$605.97

DX Engineering DVA Dual Vertical Array Systems

DX Engineering DVA Dual Vertical Array Systems are advanced phasing systems that have set a new standard for array performance with two ground-mounted verticals. Dual Vertical Array Systems include a compact DVA Phasing Relay Unit made specifically for an individual HF band and an EC-DVA Directional Control Console. DX Engineering Dual Vertical Arrays produce two opposite enhanced End-Fire Cardioid patterns and one Broadside-Omni pattern. Heavy-duty components handle over 2 kW continuous RF power for enhanced performance at low SWR over a wide bandwidth. The Dual Vertical Array end-fire directional patterns achieve a real front-to-back over 20 dB with typical array forward gain up to 3 dB over a single vertical. The greatest advantage of a Dual Vertical Array is that a tower and rotator are not required, as with a Yagi antenna. Especially for 160, 80, and 40, and even on the other HF bands, a Dual Vertical Array is mechanically simpler and safer. Here is a financially practical directional antenna that is much easier to install! These are great directional antenna systems for temporary and Field Day operation, as well as for permanent builds, because they ARE so much easier to install than a beam! If you are dissatisfied with your present system, are ready for an upgrade, or just need to get out of the tower game, the DX Engineering DVA is your answer! Refurbish an existing antenna system, equip your temporary array, or build a new phased array with a DVA. It's all on the ground, safe and simple: DX Engineering Dual Vertical Arrays offer a better way to enjoy a high-performance mono-band directional antenna. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.

5.0 out of 5 stars ( 4 )

$575.98

—

$685.98

  • 1
  • Page 1 of 1