Availability
8 Results Found For "Choke"
The Radio Source TheMATCHBOX Broadband Matching Transformer
The Radio Source TheMATCHBOX Broadband Matching Transformer is a multi-tap transmission-line transformer designed to raise the inherently low feed-point impedance of electrically short end-fed antennas to a value suitable for direct connection to 50-ohm coaxial cable. Unlike conventional transformers that provide optimal performance primarily above 1 MHz, TheMATCHBOX delivers efficient operation down to 100 kHz using a manganese-zinc (MnZn) toroid core, minimizing loss while maintaining a low standing wave ratio. Because the feed-point impedance of electrically short end-fed antennas is influenced by antenna length, ground conductivity, and ground system quality, TheMATCHBOX is field-configurable with eight impedance transformation ratios. This flexibility allows it to match antennas with feed-point impedances ranging from 3 to 37 ohms to a standard 50-ohm coaxial feed line. Designed for permanent outdoor installation, TheMATCHBOX is housed in a rugged, weatherproof aluminum enclosure that mounts directly at the antenna feed point. Integrated top and bottom mounting flanges allow for secure attachment to a wide variety of support structures, providing a durable and reliable solution for LF and MF antenna systems
Not Yet Reviewed
$595.00
REZ Antenna Systems Scout XFORM Antenna Kits
REZ Antenna Systems Scout XFORM Antenna Kits are designed to get you up and running fast. Based on the Scout XF Base, these versatile kits contain the parts you need to set up portable antennas in the field for portable operations. Each kit provides the building blocks to set the XFORM antenna system up in a variety of ways. What type of antenna you can set up with each kit is varied but comes with the parts to set up at least a vertical and a delta loop. The REZ Antenna Systems SXF-41KIT1 includes: the REZ Ranger Pro backpack, the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ Ground Spike, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT2 includes: The REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT3 includes: the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit The heart of these REZ antenna kits is the Scout XF mounting base, which is designed to connect your coax to the rest of the XFORM system. Featuring a pair of 3/8x24 studs, a ring for hanging the Scout and coupling nuts, this versatile mounting base allows for your antenna to be oriented in multiple ways. Connection points along the base allow for easy attachment of radials. The REZ XFORM 4:1 UNUN mounts to the top of the Scout XF mounting base and adds a 4:1 transformer to the antenna system. This is useful when setting the antenna up as a delta loop or a Rybakov Vertical. Gaskets on the UNUN allow for sealing against inclement weather. The REZ Multi mounts allow for attaching the Scout XF base to the Ground Spike or a tripod. Providing three 3/8x24 threaded holes on the top, one horizontal, and two at 45-degree angles opposite each other as well as a 3/8x16 and a 1/4x20 for mounting on a REZ Ground Spike or the REZ [Z]Pod Tripod. Comes with a 3/8x24 stud for mounting to the Ground Spike or [Z]Pod Tripod. The REZ Delta Loop Antenna Wire Kits are a 25-foot-long wire that is designed to be paired with a pair of 17-foot stainless steel telescopic whips. Copper clips on each end of the [Z]Kore Kevlar antenna wire provide a solid connection to the telescoping whips, and the wire stores on a convenient wire winder to keep the wire neat and for easy deployment and storage. The REZ [Z]-17SS Stainless steel whips are 17-foot-long telescopic whips that collapse down to 24 5/8in. Weighing in at 14.4 oz, with a power rating of 1000W PEP, these 17-foot whips are resonant on 20-6 meters by themselves or up through 40 meters with the addition of an XFORM UNUN. The REZ CM7 Common Mode feedline chokes provide a reduction in common mode current that travels back down your coax and causes issues for radiating your signal. These quality feedline chokes help keep the RF radiating from the antenna where you want it and not the coax. The REZ Ranger Pro Backpacks provide a convenient way to carry your REZ antenna system and ancillary gear into the field. Depending on the size of your radio and battery, you may be able to carry your entire portable setup in this backpack. This quality pack makes it easy for organization of all of your portable gear with multiple pockets and Molle webbing for additional attachment points to hold your gear.
Not Yet Reviewed
$549.95
—
$619.94
Chameleon Antenna MPAS 2.0 with Hybrid Mini Portable HF Antennas
Chameleon Antenna MPAS 2.0 with Hybrid Mini Portable HF Antennas (Modular Portable Antenna System) is a concept allowing the radio operator to configure and deploy the antenna system in a variety of configurations. This new 2.0 version is a complete backpack antenna system that includes the CHA MIL 2.0 whip and the CHA MIL EXT 2.0 and more wire to support a greater range of deployment configurations: Vertical, Horizontal, Sloper, Inverted Vee, Inverted L, NVIS, Balcony, Stationary Vehicle and Man-Pack. The CHA MPAS 2.0 is perfect for Emergency Preparedness and Survival Communication. It is also the antenna for hams that enjoy camping, hiking, biking, or other types of outdoor recreation which require communication gear to be both effective and highly portable. Specifications: Frequency: 160M - 6M (all configurations require a wide-range antenna tuner) Power: 500W SSB or 250W CW. Mounting Configuration: 3/8-24 Thread The antenna system consists of: 1 X CHA HYBRID-Mini Matching Unit 1 X 73' Antenna Wire 1 X 25' Counterpoise Wire 1 X CHA MIL 2.0 (113 in. Length) 1 X CHA MIL EXT 2.0 (105.5 in. Length) 1 X CHA SPIKE 1 X CHA 50' Coax with RFI Choke 1 X CHA MILITARY BACKPACK 2 X 3/8-24 SS Nuts Stainless Steel Hardware NOTE: IT'S IMPORTANT TO WATERPROOF THE CHA MIL EXT 2.0 BEFORE PERMANENT INSTALLATION Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 6 )
$625.00
InnovAntennas OP-DES 50 MHz Yagi Antennas
InnovAntennas OP-DES 50 MHz Yagi Antennas are a relatively new development from InnovAntennas. OP-DES stands for Opposing Phase Driven Element System, in which the ends of the dipole radiator of these antennas is angled backwards towards the reflector, parallel to the boom. This results in opposing phase relationships in the ends of the driven element, providing a very clean directional pattern with few side lobes. The OP-DES Yagi has optimized gain over a wide frequency range, while retaining a good front-to-back ratio. The driven element dipole of an OP-DES antenna has a low impedance of 50 ohms. This eliminates the need for matching elements or a transformer balun. For this reason, the antenna is offered without a balun, but an RF choke balun made of ferrites on coax should be used at the feedpoint terminal studs. With the coaxial cable directly connected to the driven element dipole, well over full legal limit power levels are possible. Like all InnovAntennas Yagis, the OP-DES 50MHz antennas are extremely robustly constructed; the larger model uses truss cables for the boom. All elements of the antenna use high quality aluminum, the clamps and screws are made of stainless steel. The supplied mast clamp is designed for masts up to 2 in. (50mm) diameter. Application Description Monoband Yagis are often used at contest stations, or when you want to use only one band for a certain time, for example to focus on a specific target during sunspot minimum. Another advantage of monoband antennas are the stacking possibilities, i.e. the arrangement of two or more identical antennas properly spaced from each other. InnovAntennas Yagis provide all the necessary technical specifications, so there is no guesswork about the stack spacing. The InnovAntennas OP-DES 50 MHz Yagis are designed through careful numerical optimizations to provide excellent gain with good bandwidth. As a result, a low SWR of 1.1:1 is achieved in the frequency range of 50.0 - 50.6 MHz (6-element) or 50.0 - 51.35 MHz (5-element). The experience of the developer Justin, G0KSC ensure superior operations with these antennas in practice, often supported by a lively exchange between users. TECHNICAL DATA InnovAntennas OP-DES 50 MHz Yagi (Monoband) Antenna Mast Mount: Center Antenna Type Directional Antenna Band 6m Power Handling: 5000 W Polarization: Horizontal Balun Included: No Mast Diameter Max.: 2.00 in. (50mm)
( 2 )
$529.99
CHAMELEON ANTENNA MPAS 2.0 Portable HF Antennas
CHAMELEON ANTENNA CHA MPAS 2.0 Portable HF Antennas (Modular Portable Antenna System) is a concept allowing the radio operator to configure and deploy the antenna system in a variety of configurations. This new 2.0 version is a complete backpack antenna system that includes the CHA MIL 2.0 whip and the CHA MIL EXT 2.0 and more wire to support a greater range of deployment configurations: Vertical, Horizontal, Sloper, Inverted Vee, Inverted L, NVIS, Balcony, Stationary Vehicle and Man-Pack. The CHA MPAS 2.0 is perfect for Emergency Preparedness and Survival Communication. It is also the antenna for hams that enjoy camping, hiking, biking or other types of outdoor recreation which require communication gear to be both effective and highly portable. Specifications: Frequency: 160M - 6M (all configurations require a wide range antenna tuner) Power: 100W SSB or 50W CW. Mounting Configuration: 3/8-24 Thread The antenna system consists of: 1 X CHA HYBRID-MICRO 1 X 73' Wire 1 X 25' Wire 1 X CHA MIL 2.0 (113 in. Length) 1 X CHA MIL EXT 2.0 (105.5 in. Length) 1 X CHA SPIKE 1 X CHA 50' Coax with RFI Choke 1 X CHA MILITARY BACKPACK 2 X 3/8-24 SS Nuts Stainless Steel Hardware NOTE: IT'S IMPORTANT TO WATERPROOF THE CHA MIL EXT 2.0 BEFORE PERMANENT INSTALLATION
( 44 )
$600.00
Chameleon Antenna Portable Resonant Vertical Antennas 2.0
Chameleon Antenna Portable Resonant Vertical Antennas 2.0 is a lightweight rugged antenna designed for quick deployment and recovery in the field. As this antenna is modular it can be combined with components of the popular Chameleon MPAS antenna system. The Chameleon PRV 2.0 system comes with a 58-inch telescoping stainless steel whip, a single extension 27-inch aluminum mast, a puck hub for attaching the included four 12.5 foot long radial wires that are on wire winders, tent stakes, a blank adapter (for connecting the coax to the antenna) a 12 foot long coax cable made of RG-58 with an integrated RF choke, a set of band keys (to help with a starting point for tuning the antenna when setup. Several mounting options are available: a Ground Spike mount, jaw mount, carbon fiber mini tripod or no mount at all. If you use a camera tripod adaptor, you can use a heavy-duty camera tripod, monopod or a trekking pole as a support for this antenna. The MCC-PRV covers the 40 through 6-meter bands with the components included in the MCC-PRV in the following configurations: base loaded vertical, center loaded vertical and a vertical dipole for 6 meters. Once the antenna is set up, the included band keys help to get the coil set in an area that is close to the resonance point for the band you're set up for. As a resonant antenna, no tuner is required. A single operator can set up and tune the MCC-PRV-2 in about 10 minutes. The whole package, including the tactical storage bag, weighs a modest 3 pounds, 11 ounces. The storage bag has compartments for all the components of the MCC-PRV-2 and works to keep things organized. The modular approach to the MCC-PRV-2 allows for multiple antenna configurations depending on antenna height, efficiency and footprint available where necessary. By combining the MCC-PRV with the MPAS system, the range and abilities of the antenna system can be extended extend the range and ability of the MCC-PRV. NOTE: The base of this antenna system is sold separately. Additional Feature and Specifications: Frequency Range: Base Loaded Vertical: Approximately 5.8 – 38 Mhz (40- 10 meters) Center Loaded Vertical: Approximately 5.7 – 30 MHz (40 - 10 meters) Vertical Off-Center Fed Dipole: 50.0 – 54.0 MHz (6 meters) Power Handling: 500W intermittent Duty Cycle (SSB), 300W CW, 200W all other modes. Height: SS58 Base Loaded configuration: Approximately 70 in. assembled. (excluding base and mount). SS58 Center Loaded configuration: Approximately 97 in. assembled. (excluding base and mount). 6m Vertical Off-Center Fed Dipole: Approximately 78 in. assembled. (excluding base and mount). SWR: Less than 2:1 at resonance when properly tuned. 2:1 Bandwidth: Typically covers entire Amateur Radio Service band on 30 – 6 meters. (Worst case measured: 132 KHz at 7.1 MHz) Weight: 3 lbs. 11 oz.
Not Yet Reviewed
$650.00
Grazioli Antennas MV6 HF/6M Multiband Vertical Ground Plane Antennas
The Grazioli Antennas MV6 is a high-performance, base-fed 1/4-wave multiband vertical ground plane antenna designed to provide coverage of the amateur 20, 17, 15, 12, 10, and 6-meter bands from a single compact installation. With an overall height of 22.1 ft (6.75 m) and a continuous power handling capability of up to 3 kW in all operating modes, the MV6 delivers full-size antenna performance while maintaining a practical footprint for demanding HF and VHF installations. The antenna features heavy-duty construction utilizing premium AW6063-T66 aluminum alloy tubing, precision CNC-machined components, and high-quality AISI 304 and AISI 316 stainless steel hardware for exceptional mechanical strength, durability, and long-term corrosion resistance. Each antenna includes a detailed assembly manual and a unique serial number for complete production traceability. Multiband Radiating System The MV6 employs an innovative multiband design consisting of a central radiator dedicated to the 20-meter band and four resonant radial elements that provide operation on the 17, 15, 12, 10, and 6-meter amateur bands. Unlike trapped multiband designs, the radial elements are true quarter-wave resonators and do not utilize traps that can introduce additional losses and reduce efficiency. The antenna is fed directly without impedance transformers or matching devices that could limit power handling or negatively affect overall efficiency. A high-impedance inductance incorporated into the feed system creates a DC-grounded path that helps dissipate electrostatic charges and atmospheric disturbances. Band tuning is accomplished through adjustment of the telescoping sections of the central radiator and radial elements, allowing each operating band to be independently calibrated. The only interaction occurs between the 17-meter and 6-meter sections, where adjustment of the 17-meter resonator also influences 6-meter resonance. Grazioli recommends the use of a graphical antenna analyzer such as RigExpert or NanoVNA to simplify the tuning process. Common-Mode Current Suppression The MV6 is supplied with an original FAIR-RITE FT240-43 ferrite toroid manufactured in the USA for the construction of a high-performance RF choke. When properly assembled, the choke significantly attenuates common-mode currents across the HF spectrum from 1.8 to 30 MHz, helping to improve antenna performance and reduce unwanted RF current on the feed line. Grazioli recommends installing the completed choke directly below the antenna feed point to minimize the possibility of RF feedback on the coaxial cable. Proprietary High-Power UHF Connector The MV6 utilizes a proprietary connector designed and manufactured by Grazioli rather than a conventional commercial SO-239. The connector features a true 50-ohm characteristic impedance, is rated for operation up to 500 MHz, and can handle 5 kW continuous RF power at 30 MHz and more than 3 kW at 50 MHz. The connector body is manufactured from nickel-plated CW614N brass, while the center pin is 24K gold-plated to prevent oxidation and maintain excellent electrical contact. A PTFE insulator provides outstanding electrical and thermal performance over an operating temperature range of-148°F to 500°F (-100°C to +260°C), and the assembly is protected by a dedicated elastomer weather hood to prevent moisture intrusion. Heavy-Duty Mounting System The MV6 mounting bracket is fabricated from 0.098 in. (2.5 mm) thick AISI 304 stainless steel and attaches to the antenna through a clamping system that creates an extremely robust mechanical connection. Mast attachment is accomplished using an AISI 304 stainless steel M6 V-bolt and column nuts, providing secure installation and reliable long-term support in demanding operating environments.
Not Yet Reviewed
$679.99
InnovAntennas VertiGO HF Vertical Antennas
InnovAntennas VertiGO HF Vertical Antennas cover multiple bands when fed as a non-resonant radiator using a remote antenna tuner mounted at the base. They can also be fed directly as a monoband vertical and are typically and most easily installed as a ground-mounted vertical, depending on the location and the support. To achieve the matching required by modern transceivers and amplifiers, other shortened vertical radiators use traps or coils but, those components contribute to losses; power lost as heat. InnovAntennas VertiGO Antennas radiate on all bands along their entire length. Radials are required for efficient operation of any HF vertical; 16 or more ground radials are better, where their length isn't critical. A remote tuner installed at the base of the antenna provides maximum efficiency and the best performance on the bands indicated. Higher frequencies will tune but higher angle patterns will limit performance. A ferrite bead choke should be used at the remote tuner on the coaxial cable from the station to prevent it from radiating and collecting RF noise. VertiGO Vertical Antennas from InnovAntennas are available in three different height versions, each with rugged aluminum tubing sections, swaged and slit at the top for the element clamps. Brackets and clamps are included for mounting to a user supplied support pipe.
( 1 )
$619.99