Availability
2 Results Found For "Choke"
DX Engineering DXE-VE-60-2P 60-Meter Monoband Vertical Antennas
DX Engineering DXE-VE-60-2P 60-Meter Monoband Vertical Antennas are high performance, mono-band vertical antenna systems that are easy to assemble, install and adjust. An overall height of about 43 ft. allows these antennas provide full-band 60M coverage with one full quarter wavelength. Since the impedance at resonance of a properly installed quarter wave vertical is less than 50 ohms, the SWR may be optimized with the optional DXE-VMN-1 Matching Network Kit, rather than changing the length in an attempt to find better SWR. Parts included with DXE-VE-60-2P antenna kits are: * DXE-MBVE-5ABASE * DXE-MBVE-5ATOP * DXE-MBVE-5A60MCK (60 meter kit) * Maxi-Core® 20 1:1 Current Choke Balun * DXE-UN-BRKT-5A Balun mounting bracket These ground-mounted antennas will require user-supplied radials, radial plate, radial hardware and ground staples. Radials increase antenna current, sharpen the antenna Q and boost efficiency. Additionally, two DXE-SSVC-2P Saddle clamps are required for antenna mounting. In case you don't want to collect these parts piece meal, all of them are included in the larger DXE-VE-60-2P-RAD 60 Meter Monoband Vertical Antenna kits. The SAF-T-TILT Tiltâ„¢ Base, supplied with the DXE-VE-60-2P, allows you to walk the antenna up and down to make tuning changes easily. Designed with 6063 corrosion-resistant aluminum tubing and stainless steel hardware, these antennas are very durable and attractive. With excellent surface appearance, 6063 aluminum alloy is the best alloy for high strength, long-lasting antenna applications. 60 meters is used throughout much of the world as an emergency and search and rescue band. Carrier frequencies from 5.102 through 5.425 MHz are used, with Upper Sideband as the emission mode. Due to limited access and rugged terrain, heavier activity exists in Australia and the State of Alaska. Alaska's emergency channel is 5167.5 USB. Australia has a 60 meter health and welfare net to monitor its citizens traversing the treacherous Outback regions. Amateur Radio operations have also been authorized on 60 meters in many parts of the world. In the USA, five channels are available including 5330.5 kHz, 5346.5 kHz, 5357.0 kHz, 5371.5 kHz, and 5403.5 kHz. These are the frequencies that appear in your transceiver's tuning display when your transceiver is properly set in the USB mode. Note: For additional product information, please look at the files under the "Documentation" tab. CW and digital modes may also be used on 60 meters. That makes 60 meters a worldwide and versatile DX band! Get in on the 60 meter action with a robust quarter wave vertical antenna. Install DX Engineering 60 Meter Monoband Vertical Antennas and see who you can work on 5 MHz!
Not Yet Reviewed
$828.45
Grazioli Antennas MV7 HF/6M Multiband Vertical Ground Plane Antennas
The Grazioli Antennas MV7 is a base-fed 1/4-wave multiband vertical ground plane antenna designed to provide coverage of the 40, 20, 17, 15, 12, 10, and 6-meter amateur radio bands from a single antenna system. Standing 29.4 ft (8.97 m) tall, the MV7 expands upon the proven MV6 platform by adding 40-meter capability while maintaining a compact footprint and efficient multiband operation. The antenna features heavy-duty construction utilizing premium AW6063-T66 aluminum alloy tubing, precision CNC-machined components, and high-quality AISI 304 and AISI 316 stainless steel hardware for exceptional strength, durability, and long-term corrosion resistance. Rated for up to 1,500 watts SSB on 40 meters and 3 kW on all other bands, the MV7 is engineered for demanding amateur radio applications. Each antenna includes a detailed assembly manual and a unique serial number identifying the production batch and manufacturing data for quality traceability. Note: The MV7 includes a guying wheel for use with non-conductive guy ropes. Guying is recommended when the antenna is installed in areas subject to high wind conditions. Dual-Band 40/20 Meter Radiating System The MV7 is based on the established MV6 platform but incorporates a specially designed dual-band 40/20-meter central radiator. A loading coil combined with a capacitive top section allows the antenna to operate efficiently on both bands by isolating portions of the 20-meter radiator while providing the required inductive loading for 40-meter operation. The upper radiating section utilizes telescoping tubes that allow adjustment and calibration across the entire 40-meter band while presenting minimal wind resistance. DBFC Counterpoise System A key innovation of the MV7 is its DBFC (Dual Band Folded Counterpoise) system, a unique design developed to extend antenna performance to 40 meters without requiring long wire radials or loaded radial systems. The DBFC system uses a lightweight AISI 316 stainless steel stranded cable attached to one of the antenna's radials to create a dual-band electrical counterpoise. The combined length of the cable and aluminum radial forms an approximately quarter-wave counterweight on 40 meters while remaining compact through a folded arrangement. This design allows lower-frequency operation while preserving the performance characteristics of the higher amateur bands. FAIR-RITE RF Choke System The MV7 is supplied with an original FAIR-RITE FT240-43 ferrite toroid manufactured in the USA for construction of a high-performance RF choke. When installed directly below the antenna feed point, the completed choke significantly attenuates common-mode currents throughout the HF spectrum from 1.8 to 30 MHz, helping to improve antenna efficiency and reduce unwanted RF on the feed line. Proprietary High-Power UHF Connector Rather than utilizing a conventional commercial SO-239 connector, the MV7 employs a proprietary connector engineered and manufactured by Grazioli. The connector features a true 50-ohm characteristic impedance and is rated for operation up to 500 MHz. Its robust design supports 5 kW continuous RF power at 30 MHz and more than 3 kW at 50 MHz. The connector body is manufactured from nickel-plated CW614N brass, while the center pin is 24K gold-plated to prevent oxidation and maintain reliable electrical contact. A PTFE insulator provides excellent electrical and thermal performance, and a protective elastomer hood helps prevent water and moisture intrusion. Heavy-Duty Mounting System The mounting bracket is fabricated from 0.098 in (2.5 mm) thick AISI 304 stainless steel and secures to the antenna using a robust clamping system designed for long-term mechanical stability. Mast attachment is accomplished through an AISI 304 stainless steel M6 V-bolt and column-nut assembly, providing secure installation and dependable support in demanding outdoor environments.
Not Yet Reviewed
$929.99