Filters
3 Results Found For "noise"
InnovAntennas 50MHz 8-Element LFA-2 Low Noise High Performance Yagi
InnovAntennas 50MHz 8-Element LFA-2 Low Noise High Performance Yagi offers amazing pattern and performance for its price, for the critical 50.0 – 50.5 MHz weak signal section of the 6m band.. This Loop Fed Array needs extra space, with its very long 38.3 ft. boom, but it rewards the owner with stunning performance with amazingly low-noise, great forward gain and best front-to-back of all long boom 6M beams. The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna, providing an ultra-low noise "front-end" for any advanced 50 MHz radio. This rugged 8 element second generation LFA beam is hard to beat with a direct-feed 50-ohm feedpoint, no matching losses and excellent rejection of unwanted signals and noise. It's very well suppressed side lobes in both H and E planes make this model ideal for very noisy city locations. For the 6-meter enthusiast who wants to beat the noise, enjoy great gain, maximum front-to-back performance, all for a great price, THIS is the 50MHz Yagi for you: InnovAntennas 50MHz 8-Element LFA-2 Low Noise High Performance Yagi.
( 1 )
$865.99
InnovAntennas LFA-WOS 6 Meter 7 Element Yagi
InnovAntennas LFA-WOS 6 Meter 7 Element Yagi has a particularly long boom that is designed for excellent front-to-back ratio. The maximum transmit power is 5 kW with SWR less than 1.1:1 in the range 50-50.45 MHz with average gain of 12.9 dBi. This antenna was specially designed for G3WOS, who was looking for a perfect antenna for 6m for his free standing mast. The relatively long boom provides good gain with excellent front/rear ratio, so this antenna is great for EME and "weak signal" DX. This antenna has very highly suppressed lobes in both azimuth and elevation plots and therefore is ideal for very noisy city locations. If you want to beat the noise in a mid-sized 6m antenna, this is the one for you! The G0KSC LFA Yagi is a major step forward in the development of the Yagi Antenna; it provides a low-noise front-end for your radio so you hear more weak signals. This 7 element 50 MHz LFA2 is another exciting slant on the LFA design with both the last third of both the reflector and first director elements being bent towards the driver loop in order to enhance performance. Incredible levels of F/B have been achieved providing the ultimate in rear-end suppression. This antenna is made with tapered elements 16mm center and 13mm outer sections. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which accommodate 2 inch (50mm) masts. Boom is 2 inch (50mm) aluminum in the center, tapering to 40mm with a 45mm section, all with 2mm booms. A boom guy system is provided with this antenna. Marine grade Stainless Steel Fittings Original Stauff Insulation clamps Mill finished boom and elements for highest levels of accuracy Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the components of our antennas have least effect on performance and pattern degradation. InnovAntennas LFA-WOS 6 Meter 7 Element Yagi Specifications: Avg. Gain: 12.90dBi @ 50.150MHz Avg. Front/Back: 30.74dB @ 50.150MHz Peak Gain: 12.96dBi Peak F/B: 33.75dB Power Rating: 5kw SWR: Below 1.1:1 from 50.00MHz to 50.450MHz Stacking Distance: 5.5 -7.5m (6.8m recommended) 2 Stacked Gain @ 6.8m spacing: 15.75dBi 2 Stacked F/B: 37.83dB 2 Stacked Gain @ 6.8m Spacing 10m above ground: 20.72dBi Boom Length: 9.5m Weight: 15Kg / 33LB Turning Radius: 4.974m / 16.3ft Wind Loading: 0.36 Square Meters / 3.93 Square feet Wind Survival: 176KPH / 110MPH
Not Yet Reviewed
$939.99
EAntenna VHF and UHF Directional Antennas
EAntenna VHF and UHF Directional Antennas include exciting new offerings for the 50, 144 and 430 MHz bands. Weak-signal enthusiasts will enjoy using these high quality beams with superior specs for SSB, CW, digital and satellite. Here are the original low-noise Loop Fed Array mono-band beams or Optimized Wideband Arrays for VHF and UHF. Plus there are super specialized 2 meter or 70 cm Cross Polarized Yagis and the compact EAntenna 6 meter Moxon antenna that has only a 3 ft. boom! NOTE: The dual-band beams for 2 meters and 70 cm designed by DK7ZB cover 144 to 146 MHz and 420 to 440 MHz, which is the entire band in Europe. In the USA they are suitable for use on SSB, CW, digital and satellite as a horizontally polarized antenna. They will NOT function for the American FM Simplex and Repeater band sections of 146 - 148 MHz and 440 -450 MHz. DX Engineering recommends antennas manufactured by EAntenna because their attention to detail is meticulous! These Yagi, log periodic and rotatable dipole antennas are built with only the highest quality stainless steel hardware and aircraft grade aluminum. As you look through their selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce EAntenna premier HF beams and state-of-the-art VHF and UHF antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 MPH wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus we can ship internationally! When you are making plans for a new antenna at your station, plan to look right here for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version. IMPORTANT: EAntenna VHF and UHF Loop Fed Antennas are intended to be mounted horizontally for SSB and CW operation which is at the lower frequency end of the bands, NOT on FM. For example, the 2 meter LFA should be mounted horizontally and is tuned for use on 144-146 MHz and is not intended for FM use on 146-148 MHz. Additionally, the DK7ZB design EAntenna dual-band beams for 2 meters and 70 cm cover only 144-146 MHz and 420-440 MHz, the same European frequency range, and so they are not suitable for FM use in North America. EAntenna Cross Polarized LFA beams have both horizontal and vertical elements with only 144.0 - 144.5 MHz coverage designed specifically for EME or satellite enthusiasts.
( 61 )
$799.99
—
$877.98