Availability
Antennas
DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas
New Name...Same Antenna! DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas are designed for low-noise reception of signals within the frequency range of 100-kHz to 30-MHz. Their integral, extra-high dynamic range, low-noise preamplifier is designed for minimum intermodulation distortion in the presence of very high-level signals that would normally overload most preamplifiers. Read more about the exclusive Clifton Laboratories design of the loop's RF-30 preamplifier by clicking "More Details" below. RF-PRO-1B Active Magnetic Loop Antennas, formerly known as the "Pixel Loop" and recently as InLogis, are now manufactured and serviced by DX Engineering. For Amateur Radio operators, AM DXers and Short-Wave Listeners, these active loop antennas are a great way to extend your listening ability. Add DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas to your radios and start hearing more signals with less noise! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 26 )
$809.99
DX Engineering NCC-2 Receive Antenna Phasing Systems
Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!
( 19 )
$955.99
Yaesu G-1000DXA Heavy-Duty Rotator Systems
Yaesu G-1000DXA Heavy-Duty Rotator Systems are azimuth positioners designed to rotate large tower-mounted amateur and professional antenna arrays under remote control from the station's operating position. These systems feature attractive compass-dial position indication controllers, with a connector port for optional computer interface for automated directional antenna positioning control. Yaesu's G-1000DXA rotator design utilizes 98 heavy 3/8 in. dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear and practically eliminates the possibility of destructive water entry: There is no shaft hole in the top of the housing. Instead of the usual AC motor drive used in older rotator designs, the G-1000DXA use a variable-voltage DC motor, removing the need for a large starting capacitor with its potential for failure exposed to outside temperature variations. The factory-lubricated rotator unit is housed in melamine resin-coated die-cast aluminum, intended to provide maintenance-free operation under all climatic conditions. A mast alignment gauge on the rotator housing simplifies accurate mechanical alignment during installation. Tower mounted, this model handles over 23 sq. ft. of antenna wind load and over 400 lbs. of vertical mast load. Installation is required for included plug connectors on to the installer supplied 6-conductor control cable; 20 AWG for lengths less than 125 ft. and 18 AWG over 125 ft. Console power is 117 volts AC for units sold in the USA. The handsome desktop controller provides 360 degrees radial indication of actual antenna azimuth bearing. You can select rotation time over 360 degrees from 40 to 100 seconds on the G-1000DXA, and preset a desired heading for the rotator, to which it then turns automatically. The operator may select the stop heading, the compass bearing through which the rotator cannot be turned, which is most convenient for their station location and operation, allowing full rotation through north, south or both, if desired. In any case, 90 degrees overlapping rotation allows rotation through the selected stop heading for 450 degrees of total rotation. These rotators are intended for mounting to an accessory shelf inside a support tower (not supplied), at least 1-meter (40 in.) below the top of the tower. Yaesu rotators have a fine reputation within the Amateur Radio community. When installing a new tower, or replacing an old rotator, consider purchasing a Yaesu G-1000DXA Heavy-Duty Rotator System from DX Engineering.
( 14 )
$799.99
Yaesu G-5500DC Azimuth-Elevation Rotator Systems
Yaesu G-5500DC Azimuth-Elevation Rotator Systems are specially designed to accommodate horizontal cross-booms to mount pairs of VHF and UHF directional antennas for space communications. Providing simultaneous control of 450 degrees of azimuth rotation and 180 degrees of elevation rotation, they are perfect for EME (moon bounce) and satellite communications installations. The G-5500DC dual controller lets you adjust and keep track of both aspects of the antenna system's positioning. The 120 VAC controller includes an interface jack for computer control, supported by the optional GS-232A Computer Controller, as well as many aftermarket control programs and interfaces. These azimuth and elevation rotators are actually two separate motor units, now DC controlled. They may be mounted together on a mast with the included mast bracket, or independently with the azimuth rotator inside a tower and the elevation rotator mounted on the mast above the top of the tower. They handle a total of about 10 sq. ft. of antenna wind load and rotate each way in about one minute. The Yaesu G-5500 AZ-EL clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-5550DC azimuth and elevation motors operate with two independent 22 V DC control lines, each a five-wire system, using the same connectors at the end of the control cable as the previous models. Both of the new DC motors, azimuth, and elevation, are marked "G-5550DC" at the connector. Be sure to mark your connectors AZ or EL. The rear panel of the controller is titled "G-5500DC" on the serial number label. WARNING: The legacy Yaesu G-5500 Rotator motors and controller used a 26 VAC control voltage, six-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-5500DC components, which only use pins 1, 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use five-conductor, 20 gauge control cable (5 x 20 AWG). If the rotator cable needs to be longer than 125 ft. then use five-conductor 18 gauge cable (5 x 18 AWG). The input voltage for the G-5500DC controller is labeled "117 VAC" to indicate house current range of 110 to 120 Vac. When you are launching your EME or satellite communications adventure, an azimuth/elevation combination rotator is a vital tool for your antenna system. As durable as they are attractive, Yaesu G-5500DC Azimuth-Elevation Rotator Systems are available from DX Engineering.
( 17 )
$969.99
RigSelect Pro Transceiver Switch and SO2R Controllers
RigSelect Pro Transceiver Switch and SO2R Controllers boast an extensive array of capabilities that make it possible to implement an award winning SO2R station where any two of up to four connected radios can be selected as the SO2R pair, and in any order. Switch one set of headphones, microphone, paddle/key, and PTT line among any of four radios. RigSelect uses quiet solid-state relays for all audio switching, which makes Switching extremely fast and telecom quality relays are used for all Mic, Key, and PTT circuits. Additionally, the RigSelect Pro features a crisp color TFT display for status and menu operations.
( 3 )
$859.99
EAntenna HEX6B Six Band Hexbeam Antenna
EAntenna HEX6B Six Band Hexbeam is a directional HF antenna for the six Amateur bands 20, 17, 15, 12, 10 and 6 meters. This design follows the ideas of G3TXQ Steve Hunt, the originator of the Broadband version of the Hex Beam antenna. However, this mechanical construction is a version refined by EAntenna with their long-standing antenna engineering experience. The result is an efficient, lightweight portable antenna for the high HF DX bands, which is ideal for use for DXpeditions and vacations. An installation at 20 ft. above the ground can work quite well, but a tower-mounted Hexbeam at a height of 35 to 60 ft. is known to perform as intended and produce excellent DX results. The HEX6B works as two element beam on each band. Ready-to-use wires and ropes are attached to the fiberglass struts and due to the mechanical tension of the struts, the beam is stretched to its fixed size all the time, so there is no sag on the wires. The radiator dipoles are connected to the vertical center support, with each band wire element attaching with screw clamps. The center support is designed as a coaxial transformer and balun, providing a particularly good match on each band, with one feedline for all six bands. The HEX6B forward gain is approximately 3dBD or better, the front/back ratio is between 13 and 22dB. SWR is 1.5:1 or better on all bands except 10m, where SWR is 2:1 or better. Each band can be used in full bandwidth without a tuner. The maximum allowed power is 5 kW. The fiberglass tubes are double coated against UV radiation. The setup of the HEX6B six band beam is simple and can be done by one person in about 30 minutes. All ropes and wires are ready, cut to length, so no tuning is required. Due to the low weight of only 18.7 lbs. (8.2 kg) this hex beam can be installed on a light aluminum push-up mast. Rotation is either done with a small rotator or by hand. The HEX6B mast clamp accommodates poles with a Diameter from 1.10 -2.05 in. (28-52mm).
( 6 )
$851.99
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches
Hamplus AS-603WL Automatic Remote HF and VHF Antenna Switches provide a new level of affordable convenience. This amazingly intelligent, three-transceiver interfaceable dual-relay smart control communicates wirelessly with and selects a six port remote antenna relay via the coaxial cable. The upgraded AS-603WL Smart Control Console with a black finish controls the AS-61WL weatherproof outdoor relay box with no control cable required. Select any one of three radios to connect or bypass the single amplifier I/O in the shack. Supporting one antenna connected to one radio at a time, manual or automatic selections of antenna and radio are confirmed with illuminated pushbuttons. Transceivers interfaced with optional cables provide frequency data for memorized automatic antenna selections. Interface cables are available for Elecraft, Icom, Kenwood and Yaesu transceivers which support frequency data for specific antenna selections by band segment. The AS-603AL also features an RS-232 serial port for PC controlled remote operation. The Hamplus AS-603WL Black system operates from 1.8 to 150 MHz and handles up to 3,000 watts PEP under 1.5:1 SWR. SO-239/UHF Female connectors on the back panel of the AS-603WL console include an In/Out pair to use one linear amplifier, wattmeter, or both, with all three radios! Click on HPY-AS-603WL-BK below to see more details! Finally, an intelligent remote antenna switch that knows what to do! Hamplus Automatic Remote Antenna Switch and Control Console Packages are ready for your multi-radio and multi-antenna station.
Not Yet Reviewed
$837.99
QuietRadio Aziloop DF-72 Multi-Directional Receive Antenna System
The QuietRadio Aziloop DF-72 Multi-Directional Receive Antenna System is an innovative, low-noise solution for VLF to HF reception. This dual-mode, electronically rotatable HF receive antenna system features a primary frequency range of 20 kHz to 10 MHz, with coverage to 30 MHz at reduced directivity and sensitivity (determined by antenna size). Additionally, it can be fed with a single coaxial cable, eliminating the need for bulky antennas and rotators.
( 1 )
$779.99
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 6BTV Package provides 80, 40, 30, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 6BTV 6-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 4 )
$889.68
Yaesu Rotator Units
Yaesu Rotator Units are available as replacements or as stand-alone azimuth positioners for use with a third party controller. They include only the top mast bracket and hardware. Lower mast brackets are sold separately.
( 19 )
$769.99
DX Commander Signature 12.4 HF Multi-Band Vertical Antennas
DX Commander Signature 12.4 HF Multi-Band Vertical Antennas are an excellent choice for DX performance and general operations. Efficiently resonant on every HF band of operation, featuring wide SWR bandwidth and low take-off angle, the Signature 12.4 covers the Amateur bands 80 to 6 meters. DX Commander vertical antennas are based on the same principles as a fan dipole, with several vertical wire elements of various resonant lengths connected to a common feedpoint. The wire elements and support ropes are arranged with spacer plates around the non-conductive fiberglass mast. When installed with an appropriate radial system, the Signature 12.4 achieves efficient quarter-wave vertical performance with natural resonance and low SWR on every band, without the need for traps, coils or antenna tuners. Band-hopping DXing and simultaneous multi-band multiplexed operations are supported. The Signature 12.4 antenna is rated at 1500W SSB/CW, 400W FT8 and other digital modes.
( 7 )
$792.79
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are 43 ft. tall, high performance, 160 through 10 meter vertical antennas - designed from the ground up to offer ease of use, reliability and performance! New design and materials technology are used throughout. The patented* and massive SAF-T-TILT™ 3/8 in. thick rugged aluminum base allows easy, safe tilt action without the unsafe removal of mounting hardware -- as with some competitors' antennas! Now - using our ground-mounted vertical, you'll work DX as you never could with a low horizontal-dipole antenna! DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas require a special DX Engineering DXE-UN-43 UNUN with 150 ft. of RG-213 coax feed and your wide-range tuner - OR a automatic tuner at the base of the antenna without the UNUN.. These MBVE-5A verticals feature: * High strength Delrin® thermoplastic insulator that won't crack, splinter, peel or fail from exposure * Rugged structural grade type 6063-T832 drawn aluminum tubing radiator - the best alloy for high-strength, long-lasting antenna applications * New, massive, patented* SAF-T-TILT™ base allows safe raising and lowering of antenna without removal of fastening hardware * The fast taper antenna element provides the lowest wind resistance * Free-standing to 92 mph wind speeds * All Stainless Steel hardware - very durable and attractive MBVE-5A verticals include the antenna element, mounting plate with insulator, exclusive Patent Pending SAF-T-TILT™ Base, stainless steel hardware and clamps. Like any HF vertical, MBVE-5A verticals require a good ground radial system. 32 radials, 65 feet long are recommended. Fewer or shorter radials will work, but with some diminished results. For proper installation, additional materials are needed, but not supplied. You will need: * Mounting pipe--steel pipe that has 2.0 in. O.D. with 0.25 in. wall thickness, 4 ft. long -- standard 1-1/2 in. galvanized water pipe (with its 1.9 in. OD) is fine * Quick-Set or other concrete for mounting pipe installation * Radial wire and wire lugs--must use 14-gauge, stranded copper wire with PVC insulation. A minimum of 20 radials, each 32 feet long, should be used. * Penetrox A -- to ensure good connection between aluminum hardware and in-between aluminum tubing sections * Anti-seize compound, which should be used on the threads of all the stainless steel hardware to prevent galling Consider these new, cost-effective DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas and packages now available for your application: -- DXE-MBVE-5A 43 Ft. Antenna only -- DXE-MBVE-5A-4P Antenna Package with Radial Plate -- DXE-MBVE-5A-4UP Antenna Package with UN-43 UNUN -- DXE-MBVE-5A-4UPR Antenna Package with Radial Plate and UNUN Packages with Radial Plates include two extra hardware kits for a total of 60 possible radial wire connections. Packages that include the UNUN also include the UNUN mounting bracket. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *US Patents D654,063 and D654,064 DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are high-performance verticals and antenna packages that allow you to access all HF bands with only one antenna solution. Order one of these premium-quality all-band HF verticals from DX Engineering and roam HF… freely!
( 9 )
$846.95
—
$989.61
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 2 )
$765.99
Diex 3 Element Monoband Full Size Yagi Antennas
Diex 3 Element Monoband Full Size Dipole Antennas are full sized directional antennas covering the 20 through 6-meter amateur bands. Expertly engineered and crafted in Brazil from quality aluminum tubing and durable materials, these antennas are built to endure harsh environments while providing long-lasting, high-performance operation. With a power rating of up to 2000 Watts PEP, these antennas are ready for demanding applications. Offering at least 8 dBi of gain and greater than 500 kHz of bandwidth at less than 2:1 SWR, these monoband antennas will help your signal reach further – whether across the country or around the globe. Designed for efficiency, these 3 Element Monoband will get your signal further and let you chase far away DX.
( 3 )
$849.99
—
$995.99
REZ Antenna Systems Scout XFORM Antenna Kits
REZ Antenna Systems Scout XFORM Antenna Kits are designed to get you up and running fast. Based on the Scout XF Base, these versatile kits contain the parts you need to set up portable antennas in the field for portable operations. Each kit provides the building blocks to set the XFORM antenna system up in a variety of ways. What type of antenna you can set up with each kit is varied but comes with the parts to set up at least a vertical and a delta loop. The REZ Antenna Systems SXF-41KIT1 includes: the REZ Ranger Pro backpack, the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ Ground Spike, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT2 includes: The REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT3 includes: the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit The heart of these REZ antenna kits is the Scout XF mounting base, which is designed to connect your coax to the rest of the XFORM system. Featuring a pair of 3/8x24 studs, a ring for hanging the Scout and coupling nuts, this versatile mounting base allows for your antenna to be oriented in multiple ways. Connection points along the base allow for easy attachment of radials. The REZ XFORM 4:1 UNUN mounts to the top of the Scout XF mounting base and adds a 4:1 transformer to the antenna system. This is useful when setting the antenna up as a delta loop or a Rybakov Vertical. Gaskets on the UNUN allow for sealing against inclement weather. The REZ Multi mounts allow for attaching the Scout XF base to the Ground Spike or a tripod. Providing three 3/8x24 threaded holes on the top, one horizontal, and two at 45-degree angles opposite each other as well as a 3/8x16 and a 1/4x20 for mounting on a REZ Ground Spike or the REZ [Z]Pod Tripod. Comes with a 3/8x24 stud for mounting to the Ground Spike or [Z]Pod Tripod. The REZ Delta Loop Antenna Wire Kits are a 25-foot-long wire that is designed to be paired with a pair of 17-foot stainless steel telescopic whips. Copper clips on each end of the [Z]Kore Kevlar antenna wire provide a solid connection to the telescoping whips, and the wire stores on a convenient wire winder to keep the wire neat and for easy deployment and storage. The REZ [Z]-17SS Stainless steel whips are 17-foot-long telescopic whips that collapse down to 24 5/8in. Weighing in at 14.4 oz, with a power rating of 1000W PEP, these 17-foot whips are resonant on 20-6 meters by themselves or up through 40 meters with the addition of an XFORM UNUN. The REZ CM7 Common Mode feedline chokes provide a reduction in common mode current that travels back down your coax and causes issues for radiating your signal. These quality feedline chokes help keep the RF radiating from the antenna where you want it and not the coax. The REZ Ranger Pro Backpacks provide a convenient way to carry your REZ antenna system and ancillary gear into the field. Depending on the size of your radio and battery, you may be able to carry your entire portable setup in this backpack. This quality pack makes it easy for organization of all of your portable gear with multiple pockets and Molle webbing for additional attachment points to hold your gear.
Not Yet Reviewed
$759.94
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$789.98
—
$859.98
DX Engineering 5BTV 5-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 5BTV 5-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 5BTV Package provides 80, 40, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 5BTV 5-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 1 )
$849.68
DX Engineering 4BTV 4-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 4BTV 4-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 4BTV Package provides 40, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 4BTV 4-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 3 )
$759.68
DX Engineering TFS4 Series B Transmit Four Square Systems
DX Engineering TFS4 Series B Transmit Four-Square Systems bring together the highest level of engineering excellence with the practical realities of operator convenience and ease of installation. These four-square hybrid systems are available in versions for the 160, 80, and 40 meter bands. They can be easily dropped into your quarter-wave spaced vertical 4-antenna array to provide optimum directional control. They allow the operator to receive or transmit with 5.5 dB gain in any one of four directions with a 20+ dB front-to-back ratio for interference reduction from unwanted directions. You can also switch to a single Omni-directional pattern with a push of a single button. This combination permits you to listen "all-around," unhindered by pattern nulls, and then select the best direction for signal reception and noise rejection. TFS4 Series B Transmit Four Square Systems are designed for use with four monoband vertical antennas placed at the corners of a square that is one-quarter wavelength on a side. The vertical element must be ungrounded and resonant in the desired band, and should be directly base-fed by the coaxial cable phasing lines from the centrally located controller (shunt-fed towers or radiating elements cannot be used). DX Engineering has several vertical antennas that are well suited for this application. Above all, a properly designed and installed radial system is necessary for top antenna performance, whether it's a single vertical or a full array. DX Engineering strongly recommends our optional Q75- series quarter wavelength cables constructed from our own high quality DXE-11U coax. It features a waterproof PE jacket, foam dielectric and has a velocity factor of 82 percent. These cables are electronically pruned to a precise electrical length derived from your choice of center operating frequency, terminated with hand-soldered silver-PTFE PL-259 connectors and weather-sealed with shrinkable tubing. Finally, each cable is tested for high voltage breakdown for maximum reliability and power handling. Since the transmit power is divided by the controller, the coaxial cable can handle QRO power with ease. If you already have a four-square array with a hybrid controller and would like to upgrade to improved performance and the Omni feature, the DX Engineering TFS4 Series B Transmit Four Square Systems are a direct transplant. BCD logic switching allows for the use of a 4-wire control cable to perform the necessary switching functions when powered by the included control console. Features: * Classic hybrid design is easy to install * Four directions plus Omni for versatile operation * 5 kW CW power rating for high reliability * Hot switching lock-out to disable amplifier while switching * Drop-in replacement for COMTEK systems * Proven DX Engineering RF relays for high performance * RF Shielded, high impact thermoplastic cover offers unique protection * Relays cycle during Power-On to ensure clean contacts Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Four-square systems work great! DX Engineering TFS4 Series B Transmit Four-Square Systems provide the heart of a modern phased array.
Not Yet Reviewed
$807.98
—
$831.98
SSB Electronic Mast-Mount Preamplifiers
SSB Electronic Mast-Mount Preamplifiers are low-noise, band-specific, weatherproof preamplifiers designed for installation near VHF and UHF antennas. Available for the 6 meter, 4 meter (Europe), 2 meter and 70 cm Amateur bands, these preamplifiers are installed in-line, at the antenna. They improve receive performance by amplifying weak signals before feedline loss can reduce them. Powering and Sequencing Most models can be powered remotely through the coaxial cable, and many modern transceivers include a built-in bias-tee for mast-mounted preamplifiers. If the transceiver or transverter system does not provide power, an external bias-tee or remote-feed unit is required. • The DCW-15 and DCW 2004B provide sequencing support. • The DCC-12 does not provide sequencing. • SP series preamplifiers include a built-in RF VOX circuit for safe operations up to 100 watts; for transmit power above 100 watts, PTT control with a sequencer is required, some required direct DC connection (UHF female). • -S series preamplifiers feature lower current signal relays with slightly higher insertion loss. • MHP and MHP-S series preamplifiers versions require sequencer control (see below). Signal Filtering and Switching Built-in helix filters effectively reject out-of-band signals, helping maintain clean receive performance. Real coaxial relays handle transmit/receive switching, resulting in very low insertion loss (except for SP-S series). And each amplifier is carefully calibrated at multiple test stations before packaging. Dual-Band Models Dual-band models include built-in diplexers, so they require only one connection for the multiband antenna and one connection for the station coaxial cable. MHP Series for Demanding Stations The MHP series is designed for demanding operating environments and provides higher gain for weak-signal modes such as Tropo-DX and EME. With maximum transmit power handling of 1500 watts on 6m and 2000 watts on 2m and 70cm, these preamplifiers are well suited for contesting, DX, and EME operation. Important Note for MHP Models Bias-tee power is not supported, as MHP Preamplifiers must be powered directly using the appropriate cable size for the required distance, and they may only be operated with a correctly wired sequencer, such as the DCW 2004 B Sequence Controller. Transmitting high power without a directly wired sequencer is likely to damage the MHP preamplifier. Housing and Hardware All SSB Electronic Mast-Mount Preamplifiers are supplied in UV-resistant, weatherproof housings with Type N female connectors. Hot-dip galvanized clamps and stainless steel mounting hardware are included. See individual models for band coverage and detailed specifications.
Not Yet Reviewed
$770.99
—
$965.99
ACOM eBox Ethernet Remote Control Devices
ACOM eBox Ethernet Remote Control Devices directly integrate ACOM power amplifiers to Ethernet networks for Internet Remote operations. ACOM eBox is specifically designed for use only on ACOM power amplifiers. DX Engineering sells the two versions available, sold with different interface cables: * AOM-EBOX-SS for ACOM 600S, ACOM 700S and ACOM 1200S * AOM-EBOX-2000 for ACOM 2000A with RCU The eBox receives the amplifier's specific commands via Ethernet interface and forwards them to the ACOM amplifier. EASY to OPERATE There is no software to install! The administration of the eBox is done via Web-based programming interface specially developed for ACOM amplifiers. You can use any personal computer running any operating system. You just need to run web browser as Chrome, Opera, Firefox, MS Edge, Safari, etc. ALWAYS UP-TO-DATE Your eBox is always up-to-date due to its integrated function for firmware update. The newest firmware versions are available (usually as *.bin files) at www.acom-bg.com. With just a few clicks you can upload a new firmware to the eBox. ACOM eBox SPECIFICATIONS: * Remote control capabilities via Ethernet * Suitable for use with ACOM 600S, 700S, 1200S and 2000A Power Amplifiers * Web browser-based user-friendly interface NOTE: Included universal 100-240 VAC wall mount power supply with European plug is adapted to North American plug with DMV-EURO-US-PLUG, included in eBox combination models ending in -P.
( 7 )
$757.98
DX Engineering 6BTV Six-Band High Performance HF Vertical Antenna and Original Tilt Base Systems
DX Engineering 6BTV Six-Band High Performance HF Vertical Antenna and Original Tilt Base Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system. DX Engineering Hustler 6BTV Packages provide 80, 40, 30, 20, 15, and 10 meter band operation with: --Dramatically improved transmit and receive signals --Best possible signal pattern and performance boost with organized radial wire attachment system --Simplified and long-lasting RF connections with proper connectors and cable --Safe and easy tuning using our patented original Tilt Base so one person can walk the antenna up or down --Professional grade stainless steel clamps and mounting hardware Included with these antenna packages is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more about the best way to install your vertical antenna system, the reasons for installing a radial system, and find out how to "Install Radial Wires Without Digging". Click the "Documentation" link to The Guide. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential.
Not Yet Reviewed
$842.69
4O3A Rotator Genius Smart Rotator Controllers
4O3A Rotator Genius Smart Rotator Controllers are a high-precision, network-enabled rotator controllers that use a magnetic sensor to read azimuth. They support control via Windows and Android apps and integrate with the 4O3A Genius ecosystem. Typically mounted at the base of a tower in a waterproof housing or installed in the shack, they are compatible with most rotators and control is provided via LAN, USB, or Wi-Fi. A built-in web interface allows multi-user access and full remote operation. Rotator Genius supports independent control of two rotators, making them suitable for stacked arrays or complex installations.
Not Yet Reviewed
$869.99
403A Antenna Genius 8X1 Smart Antenna Switches
403A Antenna Genius 8X1 Smart Antenna Switches are designed to connect up to eight antennas to a single radio with seamless control and automation. Engineered for reliability and flexibility, they integrate effortlessly into both local and remote station installations. Whether you're a contester, DXer, or casual operator, the Antenna Genius 8x1 offers robust switching capabilities, intuitive software control, and future-proof expandability through regular firmware updates and third-party software support.
( 1 )
$839.99