Availability
DX Engineering Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches are the highest power handling antenna switches in the DX Engineering RR8 Series. Think of them as Super Duty. They are designed to switch up to 8 coaxial lines in high-power RF systems. RR8B-SD switches use enclosed RF-rated relays with exceptional RF voltage and current capability to provide reliable, long-term performance. DX Engineering RR8B-SD switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, allowing for use in complex antenna phasing and stacking systems. RR8B-SD switches use removable screw-terminal control cable plugs that greatly simplify installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting bracket flange, and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. outside diameter. RR8B-SD Remote Antenna Switches feature: * Fully shielded, high impact thermoplastic enclosure, stainless steel mounting bracket, and hardware * Excellent port isolation; greater than 60 dB at 30 MHz, worst case * Power Rating: Greater than 10 kW in normal amateur operation on all modes when using antennas with less than 2:1 SWR on 30 MHz and below. Greater than 5 kW above 30 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Lightning protection on control lines * Shorted or open selection of unused antenna ports * Custom sealed 30 ampere high-voltage RF relays * Solderless removable plug for easy installation of control line with no disassembly * Safe 12V DC relay operation * Reliable operation in all weather extremes Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For multi-band multi-antenna QRO operation, there is no better remote switch than DX Engineering RR8B-SD Remote Antenna Switches!
( 3 )
$599.99
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$739.98
—
$859.98
DX Engineering CC-8A Deluxe Control Consoles
DX Engineering CC-8A Deluxe Control Consoles are flexible, 8-position controllers used to control the DX Engineering RR8 series Antenna Switches, 8 Circle Arrays, or any product that uses a 13.8V DC, 1-of-8 or BCD control format. They feature an attractive metal housing that is powder-coated and features an ON/OFF switch, ergonomic selector knob, and eight front-panel LEDs, with adjustable brightness, to indicate the switch position. Their rear-panel external plug allows the control cable to be easily unplugged during weather events or if the shack needs to be rearranged. We also suggest unplugging the control console leads when severe weather is expected. The use of a lightning protector on the control lines (DXE-IS-RCT) is prudent as well. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering CC-8A Deluxe Control Consoles are RoHS-compliant and the components, including the solder used, are all lead-free. Only use lead-free solder and lead-free soldering tools if internal servicing is required.
( 3 )
$259.99
—
$309.99
DX Engineering RR8B-HP Remote Antenna Switches
DX Engineering RR8B-HP Remote Antenna Switches are RF switches designed to have excellent performance on HF through 6 meters. Using 16 custom, sealed, moisture-resistant relays, these Remote Switches provide the best port-to-port isolation available with reliable, long-term performance. RR8B-HP switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, thereby allowing their use in complex antenna phasing and stacking systems. DX Engineering RR8B-HP switches use a removable screw-terminal control cable plug that greatly simplifies installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting-bracket flange and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. O.D. Features of the RR8B-HP Remote Antenna Switches include: * Fully RF shielded with stainless steel mounting bracket and hardware * Best port-to-port isolation available: Over 70 dB isolation below 30 MHz, Over 55 dB isolation below 60 MHz * Loss: Less than 0.1 dB below 60 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Shorted or open selection of unused antenna ports * Sealed 20 ampere, RF-rated relays * Safe 12V DC relay operation * Lightning protection on control lines * External quick-connect plug for control lines * Reliable operation in extreme-weather conditions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For reliable operation of multiple antennas through the operation of remote switching, order DX Engineering RR8B-HP Remote Antenna Switches to do the job!
( 5 )
$549.99
DX Engineering CC-4 Four Position Control Consoles
The DXE-CC-4 Four Position Control Console is used for remote switching of relay control devices requiring 1 of 3 positive voltage control lines with a ground return. This control console is compatible with the WIMO Remote Polarization Switches WMO-18080/18081/18082 and 18083 and the Unified Microsystems UMS-RAS-4 Receive Antenna Switch. The DXE-CC-4 is an essential component for manual control of the UMS BevFlex-4X-Q Four-Direction Reversible Beverage Antenna System. The DXE-CC-4 can be used in other applications using this control scheme. The DXE-CC-4 Four Position Control Console features: • Large Rotary Knob • Stainless Steel Housing • Non-Skid feet • On-Off toggle switch • Four green LEDs indicate position chosen • Erasable position label fields • Filter capacitors on each line • Internal automatic resettable fuse • Includes a 2.1 mm power plug for +13.8 VDC power connection
( 1 )
$161.99
DX Engineering Dual Input Remote Antenna Switches
DX Engineering Dual Input Remote Antenna Switches are two-radio 8-antenna switches (2x8) designed to switch coaxial lines in medium to high power RF antenna systems. With excellent performance on HF and 6 meters, they are typically used in single operator two-radio (SO2R) or multi-two contesting stations. They offer high levels of port-to-port isolation and reliability, the same as the famous DX Engineering RR8 series single input 8-port remote antenna switches. Manual dual-control operation of the DXE-RR2X8B is possible with two separate 1-of-8 control consoles that send +13.8VDC to the selected port, such as the DXE-EC-8. In this instance, the main transceiver has precedence over the secondary when attempting to use the same antenna port, so manual switching care must be exercised. An alternative first come, first served switching approach is available with the optional DXE-MX2X8 Interface Unit. It accepts BCD signals from two DXE-CC-8A Deluxe Control Consoles, and it locks out the selected port from the other radio, rather than main port precedence. DX Engineering RR2X8B Dual Input Switches may be interfaced with a customer-supplied logical switching unit. A third-party antenna controller with dual 1-of-8 switching may be used directly with the DXE-RR2X8B Switch or with BCD to the DXE-MX2X8 Interface Unit. If the DXE-MM2X8 Interface Unit is not used, the third party unit must provide protection against hot switching and prevent the main or secondary radio ports from attempting to select the same antenna port at any time. DX Engineering Dual Input Remote Antenna Switches feature a custom-made stainless steel chassis and a special RF shielded high impact thermoplastic cover. They have a custom conductive gasket to complete the seal between the cover and stainless steel housing base. Disassembly is not required for control wiring access. DX Engineering RR2X8B switches use removable screw terminals for the control cable plugs. These removable plugs greatly simplify installation by eliminating the need for soldering or opening the enclosure. The internal, covered relays are moisture-resistant, providing many years of exceptional performance. The circuitry of the DXE-RR2X8B switches allows the simultaneous selection of multiple antenna port with the required control signals. They can be used in complex antenna systems including stacked and phased arrays. Also, conventional one-of-eight antenna switching for two separate stations is possible using separate 1-of-8 switching arrangements. For example, the main radio Input "M" may select and be connected to any of the 8 ports while the secondary Radio Input "S" can simultaneously select any of the ports that the main isn't using. The main controller always has precedence over any selection made by the secondary controller, unless the DXE-MX2X8 is employed. Features of DX Engineering Dual Input Remote Antenna Switches include: * Rugged, attractive, fully shielded weatherproof housing * DX Engineering stainless steel V-clamp included for easy mounting to tower legs or masts from 1-2 in. diameter * Multi-conductor external cable plugs for easy removal, connection and maintenance * Excellent port-to-port Isolation; greater than 70 dB at 30 MHz, worst case; greater than 60 dB up to 60 MHz * High RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12V DC relay operation * 16 MOVs for surge protection on control lines * 16 RF bypass capacitors Note: Whenever the DX Engineering "Documentation" is available, please look at the associated files for additional product information. Make your SO2R or other multi-radio multi-antenna operations easy with a DX Engineering Dual Input Remote Antenna Switch.
( 3 )
$669.99
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System, model DXE-RRMX2X8, is a packaged combination of one DXE-RR2X8B Two-Radio, Eight Port Remote Switch, one DXE-MX2X8 Interface Unit and two DXE-CC-8A Control Consoles. Each control console (A and B) can select one of 7 or 8 positions available. When one console has one particular position selected, the other console is locked out of that position - first come, first served. Providing manual SO2R functionality for two-radio selection of eight antenna systems from 100 kHz through 54 MHz, the DXE-RRMX2X8 Smart System offers virtually no loss across HF and excellent low-loss performance on six meters (less than 0.16 dB of loss at 50 MHz). The RR2X8 dual star-pattern arrangement of 24 internal relays achieves vastly improved port-to-port isolation, very low SWR and excellent power handling over conventional remote coax switches, providing connection of eight SO-239 antenna output ports to either the A (master) or B (slave) SO-239 input ports. The DXE-RRMX2X8 system also uses removable screw terminal plugs for the control cables. The removable plugs greatly simplify installation by eliminating the need for soldering. Disassembly is not required for control wiring access. The DXE-RRMX2X8B also offers the following features: * RF Shielded Weatherproof Housings - unique protection * Excellent Port-to-Port Isolation; typically greater than 70 dB at 30 MHz * Ports not selected are grounded * High-RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12 volt DC relay operation * MOVs for surge protection on control lines * RF bypass capacitors * Includes two DXE-SSVC-2P Stainless Steel V-Clamps for mounting * The DXE-MX2X8 interface unit interfaces between the DXE-RR2X8 and the two DXE-CC-8A control consoles for seamless operation Each of the two DXE-CC-8A Control Consoles require 12V DC nominal input, have LED port selection indicators and provide the BCD outputs to the DXE-MX2X8 interface unit. Specifications of the DXE-RRMX2X8 2 x 8 Remote Antenna Smart Two Radio Switch System: * Frequency Coverage: 100 kHz to 54 MHz * Power Rating: 6 kW ICAS all modes, 4 kW CCS all modes, under 2:1 SWR * Control Voltage: 10-14V DC at 100 mA per port * Port-to-Port Isolation: >70 dB below 30 MHz, >60 dB below 60 MHz * Ports Not Selected: Are Grounded * Loss: <0.3 dBm below at 52 MHz * Impedance: 50 ohms * Control Cable Requirement: Two ten conductor cables (DXE-CW9S) * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 1 )
$1,534.96
DX Engineering EC-8 Control Consoles
DX Engineering EC-8 Control Consoles are designed to control antenna switches or any other product that uses a 12 to 24V DC control voltage and 1-of-8 control format. They feature a stainless steel housing that has a powder coated finish and uses an ergonomic selector knob with scratchpad areas to mark the switch position function. Additional features include: * On/off toggle switch * Green LED indicates power * Filter capacitors on each control line * Internal automatic resettable fuse * Includes 2.1mm power plug for DC power connection * Non-skid feet Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 1 )
$189.99
DX Engineering MX2X8 Interface Unit
The DX Engineering MX2X8 Interface Unit is a specialized relay device used only for the interconnections between the DXE-RR2X8 Two-Radio Eight Port Remote Antennas Switch and two DXE-CC-8A Control Consoles. This Interface Unit allows failsafe selection and operation with two radios, each to one of eight antennas, preventing selection of the same antenna. This unit is a component of the packaged 2 x 8 Remote Antenna Smart Two Radio Switch System. It does not serve any other purpose and should not be ordered separately.
Not Yet Reviewed
$344.99
DX Engineering Remote Antenna Switch Replacement Parts
DX Engineering Remote Antenna Switch Replacement Parts are available in the unfortunate or inevitable circumstance where you require repair parts. DX Engineering offers everything from relays to connector plugs to keep your remote antenna switch operating at its highest level. Note: When looking at parts, whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 2 )
$12.99
—
$24.99
DX Engineering EC-4 BCD Control Consoles
DX Engineering EC-4 BCD Control Consoles are used to control the DX Engineering Receive Four Square Series or any other products using a 4-position (3-wire plus ground) BCD control format. They feature an attractive powder-coated housing; have an on/off switch, green LEDs with scratchpad areas to mark the switch position function, and an ergonomic selector knob. Power input of 12V DC keeps you on the air in any situation. Additional features of EC-4 BCD Control Consoles include: * Stainless steel chassis * Non-skid feet * 4-position rotary switch * Four green LEDs indicate position chosen * Filter capacitors on each line * Control wire feed-through * Power connection * Internal automatic resettable fuse * Includes a 2.1mm power plug for 12V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Have you some switching to do? DX Engineering EC-4 BCD Control Consoles can make the switch!
( 2 )
$171.99
DX Engineering CC4-CON Control Console and Switch Relay Unit Connectors
DX Engineering CC4-CON Control Console and Relay Unit Connectors are green 5-pin female connectors for the ends of control lines, that mate to the male connectors on these DX Engineering products: TFS4 series Transmit Four Square relay units CC-4SQR Transmit Four Square Control Consoles RFS-2 Receive Four Square relay units RFS-3 Receive Four Square relay units DVA series Dual Vertical Array relay units FVC-1 Feedline Voltage Controllers PS-2B PRO-STACK Two Antenna Phasing System CC8 Deluxe Switch Control Consoles CC8A Deluxe Switch Control Consoles They feature the convenience of a removable connector with compression screw terminals for easy connection the control wires.
Not Yet Reviewed
$20.99
DX Engineering Control Console Red LED Packages
DX Engineering Control Console Red LED Packages are a set of 8 replacement LEDs for any of the DX Engineering Control Consoles. Available in green or red, they may be used to repair a DX Engineering switch control console or to update virtually any older console for a new look.
Not Yet Reviewed
$13.99
DX Engineering Control Console Green LED Packages
DX Engineering Control Console Green LED Packages are a set of 8 replacement LEDs for any of the DX Engineering Control Consoles. Available in green or red, they may be used to repair a DX Engineering switch control console or to update virtually any older console for a new look.
Not Yet Reviewed
$13.99