Availability
Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches are the highest power handling antenna switches in the DX Engineering RR8 Series. Think of them as Super Duty. They are designed to switch up to 8 coaxial lines in high-power RF systems. RR8B-SD switches use enclosed RF-rated relays with exceptional RF voltage and current capability to provide reliable, long-term performance. DX Engineering RR8B-SD switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, allowing for use in complex antenna phasing and stacking systems. RR8B-SD switches use removable screw-terminal control cable plugs that greatly simplify installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting bracket flange, and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. outside diameter. RR8B-SD Remote Antenna Switches feature: * Fully shielded, high impact thermoplastic enclosure, stainless steel mounting bracket, and hardware * Excellent port isolation; greater than 60 dB at 30 MHz, worst case * Power Rating: Greater than 10 kW in normal amateur operation on all modes when using antennas with less than 2:1 SWR on 30 MHz and below. Greater than 5 kW above 30 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Lightning protection on control lines * Shorted or open selection of unused antenna ports * Custom sealed 30 ampere high-voltage RF relays * Solderless removable plug for easy installation of control line with no disassembly * Safe 12V DC relay operation * Reliable operation in all weather extremes Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For multi-band multi-antenna QRO operation, there is no better remote switch than DX Engineering RR8B-SD Remote Antenna Switches!
( 3 )
$599.99
VE2DX Electronics SO2R 2X6 Remote Antenna Switches
VE2DX Electronics SO2R 2X6 Remote Antenna Switches provide selection of any six antennas for connection to two radios, covering the frequency range of 1.8 to 60 MHz. All control signals are RFI filtered as are all VE2DX Electronics printed circuit boards (PCB) with shielding on both sides. Each SO-239 (UHF female) antenna port features five relays to achieve a design with over 80db port isolation and full legal limit power handling. The simplicity of this 2X6 design allows the use of only 2 coax cables from the station to the tower. Both radio ports have access to any of the unselected 6 antenna ports. The VE2DX Electronics SO2R 2X6 Remote Antenna Switches is available in both 12VDC and 24VDC versions; the 24VDC version is for installation that requires a longer control line to the Remote Antenna Switch . Each provides a terminal for a 12VDC line inside the weatherproof unit for remote accessories. VE2DX Electronics SO2R 2X6 Remote Antenna Switches may be controlled by third party switch consoles, station controllers and computer automation that supports two sets of 1 of 6 selection. A weatherproof chassis protects the electronics; units should be installed outdoors with connectors facing downward.
Not Yet Reviewed
$624.99
DX Engineering RR8B-HP Remote Antenna Switches
DX Engineering RR8B-HP Remote Antenna Switches are RF switches designed to have excellent performance on HF through 6 meters. Using 16 custom, sealed, moisture-resistant relays, these Remote Switches provide the best port-to-port isolation available with reliable, long-term performance. RR8B-HP switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, thereby allowing their use in complex antenna phasing and stacking systems. DX Engineering RR8B-HP switches use a removable screw-terminal control cable plug that greatly simplifies installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting-bracket flange and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. O.D. Features of the RR8B-HP Remote Antenna Switches include: * Fully RF shielded with stainless steel mounting bracket and hardware * Best port-to-port isolation available: Over 70 dB isolation below 30 MHz, Over 55 dB isolation below 60 MHz * Loss: Less than 0.1 dB below 60 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Shorted or open selection of unused antenna ports * Sealed 20 ampere, RF-rated relays * Safe 12V DC relay operation * Lightning protection on control lines * External quick-connect plug for control lines * Reliable operation in extreme-weather conditions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For reliable operation of multiple antennas through the operation of remote switching, order DX Engineering RR8B-HP Remote Antenna Switches to do the job!
( 5 )
$549.99
DX Engineering Dual Input Remote Antenna Switches
DX Engineering Dual Input Remote Antenna Switches are two-radio 8-antenna switches (2x8) designed to switch coaxial lines in medium to high power RF antenna systems. With excellent performance on HF and 6 meters, they are typically used in single operator two-radio (SO2R) or multi-two contesting stations. They offer high levels of port-to-port isolation and reliability, the same as the famous DX Engineering RR8 series single input 8-port remote antenna switches. Manual dual-control operation of the DXE-RR2X8B is possible with two separate 1-of-8 control consoles that send +13.8VDC to the selected port, such as the DXE-EC-8. In this instance, the main transceiver has precedence over the secondary when attempting to use the same antenna port, so manual switching care must be exercised. An alternative first come, first served switching approach is available with the optional DXE-MX2X8 Interface Unit. It accepts BCD signals from two DXE-CC-8A Deluxe Control Consoles, and it locks out the selected port from the other radio, rather than main port precedence. DX Engineering RR2X8B Dual Input Switches may be interfaced with a customer-supplied logical switching unit. A third-party antenna controller with dual 1-of-8 switching may be used directly with the DXE-RR2X8B Switch or with BCD to the DXE-MX2X8 Interface Unit. If the DXE-MM2X8 Interface Unit is not used, the third party unit must provide protection against hot switching and prevent the main or secondary radio ports from attempting to select the same antenna port at any time. DX Engineering Dual Input Remote Antenna Switches feature a custom-made stainless steel chassis and a special RF shielded high impact thermoplastic cover. They have a custom conductive gasket to complete the seal between the cover and stainless steel housing base. Disassembly is not required for control wiring access. DX Engineering RR2X8B switches use removable screw terminals for the control cable plugs. These removable plugs greatly simplify installation by eliminating the need for soldering or opening the enclosure. The internal, covered relays are moisture-resistant, providing many years of exceptional performance. The circuitry of the DXE-RR2X8B switches allows the simultaneous selection of multiple antenna port with the required control signals. They can be used in complex antenna systems including stacked and phased arrays. Also, conventional one-of-eight antenna switching for two separate stations is possible using separate 1-of-8 switching arrangements. For example, the main radio Input "M" may select and be connected to any of the 8 ports while the secondary Radio Input "S" can simultaneously select any of the ports that the main isn't using. The main controller always has precedence over any selection made by the secondary controller, unless the DXE-MX2X8 is employed. Features of DX Engineering Dual Input Remote Antenna Switches include: * Rugged, attractive, fully shielded weatherproof housing * DX Engineering stainless steel V-clamp included for easy mounting to tower legs or masts from 1-2 in. diameter * Multi-conductor external cable plugs for easy removal, connection and maintenance * Excellent port-to-port Isolation; greater than 70 dB at 30 MHz, worst case; greater than 60 dB up to 60 MHz * High RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12V DC relay operation * 16 MOVs for surge protection on control lines * 16 RF bypass capacitors Note: Whenever the DX Engineering "Documentation" is available, please look at the associated files for additional product information. Make your SO2R or other multi-radio multi-antenna operations easy with a DX Engineering Dual Input Remote Antenna Switch.
( 3 )
$669.99
Hamplus Desktop Antenna Switches
Hamplus Desktop Antenna Switches offer fast and convenient selection of up to six antenna coaxial cables and three radio coaxial cables. All of these switches are relay controlled and handle up to 2 kW, so you can connect these switch radio ports to separate amplifier and radio sets, or wire in one amplifier for all three radios with the AS-603AL. The AS-603 is a manually controlled rotary/relay switch and the AS-603A and AS-603AL are automatic and manual illuminated indicator push button switches with independent band memory and band data interface capabilities for up to three different radios. These intelligent band decoder models are compatible with Elecraft, Kenwood, Icom and Yaesu transceivers. Click on the model of interest for additional information at the "More Details" links below.
( 16 )
$501.99
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$521.99
—
$674.99
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$739.98
Hamplus AS-603ALS Desktop Automatic Switch for Six Antennas and Three Radios
Hamplus AS-603ALS is a high-performance desktop automatic switch designed to connect up to six antennas to three transceivers, offering seamless integration for complex amateur radio setups. It features two independent internal relays—one for antenna selection and one for radio selection—allowing flexible and intelligent switching. Key Features: -- Manual and Automatic Operation: Illuminated pushbuttons allow manual selection of antennas and radios. Automatic switching is enabled via band/frequency data from compatible transceivers. --Transceiver Compatibility: Elecraft, Icom (CI-V), Kenwood, Yaesu, and FlexRadio transceivers using optional interface cables. --Amplifier Integration: Two rear-panel SO-239 RF connectors route the selected radio's output through a shared linear amplifier. Amplifier keying is managed via three RCA inputs and a single relay output. --Memory Function: Automatically recalls the last antenna used for each band or frequency when the transceiver changes bands. --Remote Control: RS-232 serial communication with PC and downloadable software. Specifications: - Dimensions (WHD): 13.00 × 3.15 × 5.91 in (330 × 80 × 150 mm) - Power Requirement: 13.8 V DC, 140 mA - Maximum Power Handling: Up to 3000 Watts SSB PEP (with antenna SWR < 1.5:1) - Frequency Range: 1.8 to 148 MHz - Insertion Loss: < 0.2 dB - RF Port Isolation: 72 dB @ 30 MHz; 58 dB @ 50 MHz
Not Yet Reviewed
$678.58
QRO.cz MK2 Classic 6-to-2 Antenna Switches
QRO.cz MK2 Classic 6-to-2 Antenna Switches are engineered to optimize SO2R (Single Operator Two Radios) setups by offering flexible switching configurations. Operators can use the switch to connect two transceivers to up to six antennas, six transceivers to two antennas, or even configure it as a Band Pass Filter (BPF) switch for two transceivers. The MK2 version introduces several enhancements, including improved isolation and a newly integrated Hazard Protection Board for added safety and reliability. This model also incorporates First-Win logic, which ensures that only the first valid control signal is accepted, preventing conflicts. Control is made versatile with BCD (Binary-Coded Decimal) inputs that feature optocoupler isolation and high-voltage protection. The BCD interface is compatible with TTL logic and supports voltages up to 15VDC. Additionally, BCD signals exceeding 13VDC can directly power the internal relays. For added protection, when DC power is not present, all unused antenna ports are automatically grounded.
Not Yet Reviewed
$699.99
Clearance
Scratch & Dent
4O3A 8xAB Antenna Switches
4O3A 8xAB Antenna Switches integrate eight independent A/B switches into a single compact unit, enabling seamless switching between multiple antennas and radios. When paired with two 403A Antenna Genius switches (O3A-40-AG8X2 or O3A-40-AG8X2-N), it forms a powerful 8×4 antenna matrix, allowing up to eight antennas to be routed to four radios with exceptional isolation. Built with the needs of high-power stations in mind, the 8xAB Switch delivers robust performance, intuitive operation, and a clean, maintainable installation. The primary motivation behind the 8xAB switch is the integration of two Antenna Genius smart switches into an 8×4 Super Switch.
Not Yet Reviewed
$775.99
$698.39