Availability
16 Results Found For "in-line"
4O3A RS3000 Reversible Switch Controllers
4O3A RS3000 Reversible Switch Controllers are designed to improve the safety and efficiency of the RS3000 2x2 Reversible Coaxial Crossover Switch system. They ensure switching between radios and antennas only occurs when neither connected radio is transmitting, preventing accidental switching if one user begins transmitting while the other is still on the air. This makes it ideal for SO2R (Single Operator, Two Radios), MS (Multi-Single), or M2 (Multi-Two) contest configurations. These switch controllers operate on 13–15VDC input. A 3-pin DC output (5.08 mm pin header) connects to the RS3000 Crossover Switch. Before use, connect the PTT lines from both radios to the controller's RCA jacks. The controller connects to the RS3000 switch via the +12V/GND terminals. If a user attempts to switch while the other is transmitting, the controller delays the switch until the PTT line is inactive. During this delay, the "Wait" LED is illuminated. This ensures safe switching regardless of transmission frequency.
Not Yet Reviewed
$149.99
DX Engineering CC-8A Deluxe Control Consoles
DX Engineering CC-8A Deluxe Control Consoles are flexible, 8-position controllers used to control the DX Engineering RR8 series Antenna Switches, 8 Circle Arrays, or any product that uses a 13.8V DC, 1-of-8 or BCD control format. They feature an attractive metal housing that is powder-coated and features an ON/OFF switch, ergonomic selector knob, and eight front-panel LEDs, with adjustable brightness, to indicate the switch position. Their rear-panel external plug allows the control cable to be easily unplugged during weather events or if the shack needs to be rearranged. We also suggest unplugging the control console leads when severe weather is expected. The use of a lightning protector on the control lines (DXE-IS-RCT) is prudent as well. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering CC-8A Deluxe Control Consoles are RoHS-compliant and the components, including the solder used, are all lead-free. Only use lead-free solder and lead-free soldering tools if internal servicing is required.
( 3 )
$309.99
DX Engineering RR8B-HP Remote Antenna Switches
DX Engineering RR8B-HP Remote Antenna Switches are RF switches designed to have excellent performance on HF through 6 meters. Using 16 custom, sealed, moisture-resistant relays, these Remote Switches provide the best port-to-port isolation available with reliable, long-term performance. RR8B-HP switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, thereby allowing their use in complex antenna phasing and stacking systems. DX Engineering RR8B-HP switches use a removable screw-terminal control cable plug that greatly simplifies installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting-bracket flange and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. O.D. Features of the RR8B-HP Remote Antenna Switches include: * Fully RF shielded with stainless steel mounting bracket and hardware * Best port-to-port isolation available: Over 70 dB isolation below 30 MHz, Over 55 dB isolation below 60 MHz * Loss: Less than 0.1 dB below 60 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Shorted or open selection of unused antenna ports * Sealed 20 ampere, RF-rated relays * Safe 12V DC relay operation * Lightning protection on control lines * External quick-connect plug for control lines * Reliable operation in extreme-weather conditions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For reliable operation of multiple antennas through the operation of remote switching, order DX Engineering RR8B-HP Remote Antenna Switches to do the job!
( 5 )
$549.99
DX Engineering RR8B-SD Remote Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches are the highest power handling antenna switches in the DX Engineering RR8 Series. Think of them as Super Duty. They are designed to switch up to 8 coaxial lines in high-power RF systems. RR8B-SD switches use enclosed RF-rated relays with exceptional RF voltage and current capability to provide reliable, long-term performance. DX Engineering RR8B-SD switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, allowing for use in complex antenna phasing and stacking systems. RR8B-SD switches use removable screw-terminal control cable plugs that greatly simplify installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting bracket flange, and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. outside diameter. RR8B-SD Remote Antenna Switches feature: * Fully shielded, high impact thermoplastic enclosure, stainless steel mounting bracket, and hardware * Excellent port isolation; greater than 60 dB at 30 MHz, worst case * Power Rating: Greater than 10 kW in normal amateur operation on all modes when using antennas with less than 2:1 SWR on 30 MHz and below. Greater than 5 kW above 30 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Lightning protection on control lines * Shorted or open selection of unused antenna ports * Custom sealed 30 ampere high-voltage RF relays * Solderless removable plug for easy installation of control line with no disassembly * Safe 12V DC relay operation * Reliable operation in all weather extremes Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For multi-band multi-antenna QRO operation, there is no better remote switch than DX Engineering RR8B-SD Remote Antenna Switches!
( 4 )
$599.99
DX Engineering CC-4 Four Position Control Consoles
The DXE-CC-4 Four Position Control Console is used for remote switching of relay control devices requiring 1 of 3 positive voltage control lines with a ground return. This control console is directly compatible with: SSB Electronic Four-Port Mast-Mount Antenna Switches: AS-304 N (ESB-5050) AS-304 UHF (ESB-5053) WIMO Remote Polarization Switches: WMO-18080 WMO-18081 WMO-18082 WMO-18083 Unified Microsystems Receive Antenna Switch: UMS-RAS-4 (The DXE-CC-4 is an essential component for manual control of the UMS BevFlex-4X-Q Four-Direction Reversible Beverage Antenna System.) The DXE-CC-4 can be used in other applications using this control scheme: Control SWITCH Control Console Output Terminal 1 Terminal 2 Terminal 3 Position 1 - LED1 - ON 0 0 0 Position 2 - LED2 - ON +13.8 VDC 0 0 Position 3 - LED3 - ON 0 +13.8 VDC 0 Position 4 - LED4 - ON 0 0 +13.8 VDC The DXE-CC-4 Four Position Control Console features: • Large Rotary Knob • Stainless Steel Housing • Non-Skid feet • On-Off toggle switch • Four green LEDs indicate position chosen • Erasable position label fields • Filter capacitors on each line • Internal automatic resettable fuse • Includes a 2.1 mm power plug for +13.8 VDC power connection
( 1 )
$161.99
Alpha Delta Coaxial Switch Replacement Arc-Plugs®
Alpha Delta Coaxial Switch Replacement Arc-Plugs® are designed to reduce the hazards of lightning-induced or other high-voltage induced surges. When hit with a surge, they will short to ground, protecting your equipment, and will remain shorted and must be removed or replaced in order to continue operation. As with all lightning protection; these surge plugs will not prevent fire or damage caused by a direct lightning strike to an antenna, power lines, or other structure. Alpha Delta D4 Coaxial Switch Replacement Arc-Plugs® are direct replacements for Alpha Delta Coaxial Switch model Delta-2 and Delta-4 series switches. As when used in Alpha Delta Coaxial Switches, D4 Replacement Arc-Plugs® are rated at 1,500 watts CW and SSB PEP, ICAS, at an SWR under 2:1. Lightning surges do lots of damage annually. Don't let your sensitive Amateur Radio gear go unprotected. Order Alpha Delta Coaxial Switch Replacement Arc-Plugs® from DX Engineering!
( 13 )
$14.00
SSB Electronic AS-3000 Two-Port Wideband Mast Mount Antenna Switch
SSB Electronic AS-3000 Two-Port Wideband Mast Mount Antenna Switch covers the entire range from DC to 3 GHz, featuring a low-loss SPDT coaxial relay. This model (ESB-5059) can switch two antennas to one feedline, or it can be used to switch between horizontal and vertical polarization on a cross-polarized Yagi or X-quad. Featuring high power handling, very low in-line attenuation and SWR, and simple 13.8 VDC operation, the AS-3000 is an excellent addition to any VHF, UHF or SHF station. The solid aluminum chassis incorporates a mounting bracket for a 1.5 to 2.3 in. mast clamp, with three downward facing Type-N female connectors, for the default normally closed (NC) port, a normally open (NO) port and the common port. A 4-pin DIN with mating connector is used for direct DC control of the relay, and a user supplied shielded control cable is recommended to prevent RF induced false keying. The AS-3000 supports the use of short lengths of coaxial cable for mast mounted equipment to dramatically reduce losses. Coaxial lines used with this switch and antennas should be calculated and tailored so that they do not cause an impedance transformation. Specifications of the AS-3000 Mast Mount Antenna System Switch (ESB-5059): Frequency range: DC – 3000 MHz Switch positions: 2 Insertion loss, typ.: 0.01 dB / 150 MHz 0.02 dB / 500 MHz 0.025 dB / 1000 MHz 0.03 dB / 2000 MHz < 0.1 dB / 3000 MHz Isolation: >60 dB / 2,5 GHz VSWR: <1.2 : 1 RF Power Handling, by band: 1000 W/2m; 800 W/70cm; 500 W/23cm; 250 W/13cm RF Connectors: Type-N female Direct DC Control Input: 4-pin DIN (mating connector provided) Switching Voltage: 13.8 VDC @ 250mA, max.
Not Yet Reviewed
$684.99
DX Engineering Dual Input Remote Antenna Switches
DX Engineering Dual Input Remote Antenna Switches are two-radio 8-antenna switches (2x8) designed to switch coaxial lines in medium to high power RF antenna systems. With excellent performance on HF and 6 meters, they are typically used in single operator two-radio (SO2R) or multi-two contesting stations. They offer high levels of port-to-port isolation and reliability, the same as the famous DX Engineering RR8 series single input 8-port remote antenna switches. Manual dual-control operation of the DXE-RR2X8B is possible with two separate 1-of-8 control consoles that send +13.8VDC to the selected port, such as the DXE-EC-8. In this instance, the main transceiver has precedence over the secondary when attempting to use the same antenna port, so manual switching care must be exercised. An alternative first come, first served switching approach is available with the optional DXE-MX2X8 Interface Unit. It accepts BCD signals from two DXE-CC-8A Deluxe Control Consoles, and it locks out the selected port from the other radio, rather than main port precedence. DX Engineering RR2X8B Dual Input Switches may be interfaced with a customer-supplied logical switching unit. A third-party antenna controller with dual 1-of-8 switching may be used directly with the DXE-RR2X8B Switch or with BCD to the DXE-MX2X8 Interface Unit. If the DXE-MM2X8 Interface Unit is not used, the third party unit must provide protection against hot switching and prevent the main or secondary radio ports from attempting to select the same antenna port at any time. DX Engineering Dual Input Remote Antenna Switches feature a custom-made stainless steel chassis and a special RF shielded high impact thermoplastic cover. They have a custom conductive gasket to complete the seal between the cover and stainless steel housing base. Disassembly is not required for control wiring access. DX Engineering RR2X8B switches use removable screw terminals for the control cable plugs. These removable plugs greatly simplify installation by eliminating the need for soldering or opening the enclosure. The internal, covered relays are moisture-resistant, providing many years of exceptional performance. The circuitry of the DXE-RR2X8B switches allows the simultaneous selection of multiple antenna port with the required control signals. They can be used in complex antenna systems including stacked and phased arrays. Also, conventional one-of-eight antenna switching for two separate stations is possible using separate 1-of-8 switching arrangements. For example, the main radio Input "M" may select and be connected to any of the 8 ports while the secondary Radio Input "S" can simultaneously select any of the ports that the main isn't using. The main controller always has precedence over any selection made by the secondary controller, unless the DXE-MX2X8 is employed. Features of DX Engineering Dual Input Remote Antenna Switches include: * Rugged, attractive, fully shielded weatherproof housing * DX Engineering stainless steel V-clamp included for easy mounting to tower legs or masts from 1-2 in. diameter * Multi-conductor external cable plugs for easy removal, connection and maintenance * Excellent port-to-port Isolation; greater than 70 dB at 30 MHz, worst case; greater than 60 dB up to 60 MHz * High RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12V DC relay operation * 16 MOVs for surge protection on control lines * 16 RF bypass capacitors Note: Whenever the DX Engineering "Documentation" is available, please look at the associated files for additional product information. Make your SO2R or other multi-radio multi-antenna operations easy with a DX Engineering Dual Input Remote Antenna Switch.
( 3 )
$669.99
VE2DX Electronics SO2R 2X6 Remote Antenna Switches
VE2DX Electronics SO2R 2X6 Remote Antenna Switches provide selection of any six antennas for connection to two radios, covering the frequency range of 1.8 to 60 MHz. All control signals are RFI filtered as are all VE2DX Electronics printed circuit boards (PCB) with shielding on both sides. Each SO-239 (UHF female) antenna port features five relays to achieve a design with over 80db port isolation and full legal limit power handling. The simplicity of this 2X6 design allows the use of only 2 coax cables from the station to the tower. Both radio ports have access to any of the unselected 6 antenna ports. The VE2DX Electronics SO2R 2X6 Remote Antenna Switches is available in both 12VDC and 24VDC versions; the 24VDC version is for installation that requires a longer control line to the Remote Antenna Switch . Each provides a terminal for a 12VDC line inside the weatherproof unit for remote accessories. VE2DX Electronics SO2R 2X6 Remote Antenna Switches may be controlled by third party switch consoles, station controllers and computer automation that supports two sets of 1 of 6 selection. A weatherproof chassis protects the electronics; units should be installed outdoors with connectors facing downward.
Not Yet Reviewed
$531.24
—
$624.99
DX Engineering EC-4 BCD Control Consoles
DX Engineering EC-4 BCD Control Consoles are used to control the DX Engineering Receive Four Square Series or any other products using a 4-position (3-wire plus ground) BCD control format. They feature an attractive powder-coated housing; have an on/off switch, green LEDs with scratchpad areas to mark the switch position function, and an ergonomic selector knob. Power input of 12V DC keeps you on the air in any situation. Additional features of EC-4 BCD Control Consoles include: * Stainless steel chassis * Non-skid feet * 4-position rotary switch * Four green LEDs indicate position chosen * Filter capacitors on each line * Control wire feed-through * Power connection * Internal automatic resettable fuse * Includes a 2.1mm power plug for 12V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Have you some switching to do? DX Engineering EC-4 BCD Control Consoles can make the switch!
( 2 )
$171.99
VE2DX Electronics Band Decoders
VE2DX Electronics Band Decoders, available here in limited final production quantities, with three versions. They can be set up to control remote relay antenna switches and band pass filters by interfacing to a wide range of transceivers via direct connection, Bluetooth, USBoIP via WiFi and/or direct WiFi/LAN connections, when available. They interface to transceivers to decode up to twelve user defined frequency bands for the control of either eight or sixteen outputs and may be updated for band changes or new band arrival. VEX-BD1-BT Band Decoders interface with one radio and provide one set of eight outputs to automatically control a single remote multiport antenna switch OR a band pass filter (BPF). VEXD1-BTPlus Band Decoders interface a single radio to two sets of eight outputs to automatically control a remote antenna switch AND a Band Pass Filter. IBD2-BT Band Decoder is the top-of-the-line unit that can interface with a dual receiver transceiver and offers two sets of eight outputs to either automatically control two remote antenna switches, or two Band Pass Filters, or one of each. VE2DX Electronics Band Decoders are powered via a USB-C port to a Windows PC. Internal jumpers are user set to control output functions and configure support transceivers from FlexRadio, ICOM, Kenwood and Yaesu. Included with each VE2DX Electronics Band Decoders all of the following advanced features: • VE2DX TrueTTL • VE2DX TrueCAT • VE2DX TrueCIV • VE2DX Blind Operator Assistance (BOA) • VE2DX Software Defined Interlock (SDI) • RFI filtration • Heavy shielding • Signal processing • Automatic signal leveling • External Voltage Switching • CAT/CIV support • Automatic RS232c/TTL support • Wi-Fi • USB-C • Internal/External Voltage Switching • GND Switching • Status/Error messages in CW or Decimal • Mismatched Radio manufacturers • Mismatched remote switches • Mismatched band/output configurations • Blocked outputs on error • Twelve band frequency definitions per output sets • Eight output sets with support of multiple band definitions • Automatic SWR detection with assigned output VE2DX Band Decoders come with multiple LEDs for fast status checks of the Band Decoder: • Power (RED) • DATA (Cat/CIV, RED) • Automatic (RED) • Selected Radio (Green) • Error (RED) • Outputs (Yellow) • SDI - Software Defined Interlock - (RED on the IBD2-BT only)
Not Yet Reviewed
$259.99
—
$475.99
SSB Electronic AS-3000A Mast Mount Antenna System Switch
SSB Electronic AS-3000A Mast Mount Antenna System Switch is an integral part of a low-loss preamplifier and power amplifier control for two-way VHF, UHF and SHF stations. Covering the entire range from DC to 3 GHz, two high quality SPDT coaxial relays, housed in their weather- and UV-resistant enclosure, provide excellent power handling and port isolation with minimal insertion loss. The solid aluminum chassis base incorporates a mounting bracket for a 1.5 to 2.4 in. mast clamp, with six downward facing Type-N female connectors for the antenna, a mast mounted preamp, a power amplifier and the station. A single Type-F connector provides DC out for the preamplifier and a 4-pin DIN with mating connector is used for direct DC control of the relays, typically with a sequencer. User supplied shielded control and power cables are recommended to prevent RF induced false keying. The AS-3000A supports the use of short lengths of coaxial cable for mast mounted equipment to dramatically reduce losses. Coaxial lines used in this type of system should be calculated and tailored so that they do not cause an impedance transformation. The connection of the transmitting equipment to the normally closed (NC) side of the AS-3000A relays allows the safe handling of high RF power without risk to the mast mounted preamp or LNA. Voltage is required to engage the normally open (NO) side of the relays for connection of the receive only preamplifier or LNA to the antenna. Removal of the voltage, or if power is lost, allows safe transmission without worry of equipment damage from transmitted RF, and keeps the preamplifier offline when the station is not used, for charge and pulse protection. See the linked documentation for detailed diagrams of system connections which typically require a sequencer, such as the SSB Electronic DCW2004B (ESB-1025), and an LNA, Mast Mount or separately enclosed. Specifications of the AS-3000A Mast Mount Antenna System Switch (ESB-5058): Frequency range: DC – 3000 MHz Switch positions: 2 Insertion loss per relay, typ.: 0.01 dB / 150 MHz 0.02 dB / 500 MHz 0.025 dB / 1000 MHz 0.03 dB / 2000 MHz < 0.1 dB / 3000 MHz Isolation: >60 dB / 2,5 GHz VSWR: <1.2 : 1 RF Power Handling, by band: 1000 W/2m; 800 W/70cm; 500 W/23cm; 250 W/13cm RF Connectors: Type-N female LNA DC Connection: Type-F female Direct DC Control Input: 4-pin DIN (mating connector provided) Switching Voltage: 13.8 VDC @ 650mA , max.
( 1 )
$1,254.99
DX Engineering RR8B Remote Antenna Switch and Control Console Packages
DX Engineering RR8B Remote Antenna Switch and Control Console Packages bring a new level of convenience to your antenna setup. These packages combine DX Engineering's 5 or 10 kW key-down switch, plus a CC-8A or EC-8 Control Console. RR8B series Remote Antenna Switches feature: * 0-54 MHz operation with industry leading port-to-port isolation * 5 or 10 kW versions * Fully RF shielded with high strength, UV-resistant cover, stainless steel mounting bracket, and hardware * Lightning protection is standard * Solderless, removable plug for easy installation of control line with no disassembly * Can be wired without disassembly * Can select individual or multiple ports for stacking and phased array applications * Safe 12V DC relay operation * Unused antenna ports are open by design; may be internally jumpered to be grounded when not selected CC-8A Consoles feature: * 1-of-8 control format * 8 front panel LEDs to indicate switch position (with adjustable brightness) * Rear panel external plug * Operates on your 12V DC source, ideal for battery or emergency ops * Ergonomic selector knob * Powder-coated metal housing EC-8 controller features include: * 1-of-8 control format * Green power LED * Operates on your 12V DC source, ideal for battery backup or EMCOMM * Ergonomic selector knob * Powder-coated metal housing Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When a complete remote antenna switching system is needed and high reliability is a must, DX Engineering RR8B Remote Antenna Switch and Control Console Packages are your best solution! * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 8 )
$739.98
—
$859.98
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System
DX Engineering 2 x 8 Remote Antenna Smart Two Radio Switch System, model DXE-RRMX2X8, is a packaged combination of one DXE-RR2X8B Two-Radio, Eight Port Remote Switch, one DXE-MX2X8 Interface Unit and two DXE-CC-8A Control Consoles. Each control console (A and B) can select one of 7 or 8 positions available. When one console has one particular position selected, the other console is locked out of that position - first come, first served. Providing manual SO2R functionality for two-radio selection of eight antenna systems from 100 kHz through 54 MHz, the DXE-RRMX2X8 Smart System offers virtually no loss across HF and excellent low-loss performance on six meters (less than 0.16 dB of loss at 50 MHz). The RR2X8 dual star-pattern arrangement of 24 internal relays achieves vastly improved port-to-port isolation, very low SWR and excellent power handling over conventional remote coax switches, providing connection of eight SO-239 antenna output ports to either the A (master) or B (slave) SO-239 input ports. The DXE-RRMX2X8 system also uses removable screw terminal plugs for the control cables. The removable plugs greatly simplify installation by eliminating the need for soldering. Disassembly is not required for control wiring access. The DXE-RRMX2X8B also offers the following features: * RF Shielded Weatherproof Housings - unique protection * Excellent Port-to-Port Isolation; typically greater than 70 dB at 30 MHz * Ports not selected are grounded * High-RF tolerant UHF connectors * Enclosed 16 ampere RF relays * Safe 12 volt DC relay operation * MOVs for surge protection on control lines * RF bypass capacitors * Includes two DXE-SSVC-2P Stainless Steel V-Clamps for mounting * The DXE-MX2X8 interface unit interfaces between the DXE-RR2X8 and the two DXE-CC-8A control consoles for seamless operation Each of the two DXE-CC-8A Control Consoles require 12V DC nominal input, have LED port selection indicators and provide the BCD outputs to the DXE-MX2X8 interface unit. Specifications of the DXE-RRMX2X8 2 x 8 Remote Antenna Smart Two Radio Switch System: * Frequency Coverage: 100 kHz to 54 MHz * Power Rating: 6 kW ICAS all modes, 4 kW CCS all modes, under 2:1 SWR * Control Voltage: 10-14V DC at 100 mA per port * Port-to-Port Isolation: >70 dB below 30 MHz, >60 dB below 60 MHz * Ports Not Selected: Are Grounded * Loss: <0.3 dBm below at 52 MHz * Impedance: 50 ohms * Control Cable Requirement: Two ten conductor cables (DXE-CW9S) * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 1 )
$1,534.96
Clearance
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$2,056.99
$539.99
—
$1,542.74
Hamplus Desktop Antenna Switches
Hamplus Desktop Antenna Switches offer fast and convenient selection of up to six antenna coaxial cables and three radio coaxial cables. All of these switches are relay controlled and handle up to 2 kW, so you can connect these switch radio ports to separate amplifier and radio sets, or wire in one amplifier for all three radios with the AS-603AL. The AS-603 is a manually controlled rotary/relay switch and the AS-603A and AS-603AL are automatic and manual illuminated indicator push button switches with independent band memory and band data interface capabilities for up to three different radios. These intelligent band decoder models are compatible with Elecraft, Kenwood, Icom and Yaesu transceivers. Click on the model of interest for additional information at the "More Details" links below.
( 17 )
$524.99