Availability
6 Results Found For "in-line"
DX Engineering HF QRP Bandpass Filters
DX Engineering HF QRP Bandpass Filters are designed to tightly confine both transmitted and receive signals to one specific Amateur band, these filters significantly reduce out of band noise, resulting in a noticeably lower noise floor and improved weak signal reception. In multi operator contest or portable operations, they deliver the essential isolation needed to eliminate image and harmonic interference, ensuring clean mono band performance even in close quarters environments. Each filter features a sharp roll off just outside the band edges, providing exceptional rejection of adjacent band signals and maintaining maximum operating efficiency for QRP applications. Offered for the 80, 40, 20, 15, and 10-meter amateur bands, they install easily in line with the coax feedline using the BNC connectors provided on each end. With power ratings of 20 watts SSB and 5 watts digital, they are ideal for QRP enthusiasts participating in multi operator events such as Field Day, POTA, and SOTA.
Not Yet Reviewed
$69.99
DX Engineering TWIG Broadcast Interference Filter
Improve the performance of your QRP POTA or SOTA station with the DX Engineering DXE TWIG BCFIL Broadcast Interference (BCI) Filter. Engineered specifically for low power amateur radio applications, this compact module effectively attenuates strong AM broadcast band signals below the 80 meter amateur band. By suppressing these out of band signals, the filter helps lower your receiver's noise floor, resulting in cleaner, more reliable reception of weak amateur radio signals. The DXE TWIG BCFIL is equipped with BNC female connectors for quick, in line installation in the field. Ideal for portable, field, and low power fixed station use, it provides an effortless way to reduce unwanted broadcast interference without adding complexity to your station setup. Features: • Blocks strong AM broadcast band and 1.8 MHz signals below the 80 meter amateur band • Improves receiver noise floor and enhances reception of desired signals • Designed for low power transceivers • Compact in line module with BNC female connectors for easy installation • Ideal for portable POTA and SOTA, mobile, and fixed low power stations Power Rating: For QRP use only — maximum 20 watts PEP. Not suitable for high power transceivers.
Not Yet Reviewed
$49.99
RigSelect Pro Transceiver Switch and SO2R Controllers
RigSelect Pro Transceiver Switch and SO2R Controllers boast an extensive array of capabilities that make it possible to implement an award winning SO2R station where any two of up to four connected radios can be selected as the SO2R pair, and in any order. Switch one set of headphones, microphone, paddle/key, and PTT line among any of four radios. RigSelect uses quiet solid-state relays for all audio switching, which makes Switching extremely fast and telecom quality relays are used for all Mic, Key, and PTT circuits. Additionally, the RigSelect Pro features a crisp color TFT display for status and menu operations.
( 3 )
$859.99
SOTAbeams USB Battery Pack Keep-Alive Load Kits
SOTAbeams USB Battery Pack Keep-Alive Load Kits are easily assembled PC Board kits that provide an adjustable USB DC load. Some power banks and many USB battery packs switch off (go into a sleep mode) if the current being drawn is too low. This means that your device works for a few minutes and then stops. Often just a few extra milliamps current draw will keep the battery pack alive. There are various circuits on the web that give a pulsed load which works with some battery packs - but unfortunately SOTAbeams' tests have shown that such circuits don't work reliably with all battery packs. Just plug one of these Keep-Alive Load Kits into your battery pack and increase the current until battery pack stays on reliably (usually between 6 - 150 mA). Depending on the current that your powered device takes it may be a little as a few milliamps. An on-board LED indicates if the battery pack is live. The load supports a standard USB data connection. USB plug and socket for easy in-line connection. A heat-shrink sleeve is provided to protect the unit in the field. Don't have your WSPRlite lose its power source! Keep it powered up with SOTAbeams USB Battery Pack Keep-Alive Load Kits from DX Engineering.
( 6 )
$15.99
VA6AM Engineering HF Band-Pass Filters
VA6AM Engineering HF Band-Pass Filters are very high-quality multi-stage inline passive electronic devices designed to specifically limit the transmitting and receiving RF passband to a single Amateur band. They provide the clear benefit of a dramatically lower noise floor for enhanced single-band weak signal reception that is desired by DXers, elite contesting stations and Field Day operations. Used individually on mono-band radio and antenna combinations, these filters provide the isolation required, eliminating image and harmonic RF interference issues for dedicated mono-band operations in multi-radio contesting environments. Required for use with transmit multiplexers, these filters provide the additional isolation needed to allow multiple transceivers to be operated on different bands simultaneously on the same antenna.
( 8 )
$235.99
OM Power OM6BPF Automatic Bandpass Filters
OM Power OM6BPF Automatic Bandpass Filters are extremely useful and attractive multiband inline desktop units, which contain six individual high-Q hand-tuned internal band pass filter boards that cover all six Amateur Radio contesting bands: 160, 80, 40, 20, 15 and 10 meters. The OM Power OM6BPF effectively removes unwanted and interfering noise and signals from all but the single band selected for operation. Enjoy ultra-quiet reception and eliminate out-of-band emissions from the transmitted signal. The OM6BPF features low insertion loss, excellent out-of-band rejection, and handles 200 watts key-down RF. The filter design is 50 ohm, and this unit has SO-239 connectors for installation between the transceiver and the input of an amplifier or a tuner. Adding the OM Power OM6BPF will prove its worth everywhere – especially where multiple stations are present on multiple bands from a specific location like DX expeditions, MS/MM contest stations and SO2R stations. The OM6BPF protects the front end of the receiver and also eliminates or reduces interference coming from every other band, for quieter reception at any station. Join the "Contesting Class" of operators who use individual band pass filters, with the convenience of an attractive, self-contained and functional multi-band filter unit. Choose OM Power OM6BPF Automatic Bandpass Filters for your station.
( 1 )
$1,499.99