Availability
15 Results Found For "noise"
VA6AM Engineering HF Band-Pass Filters
VA6AM Engineering HF Band-Pass Filters are very high-quality multi-stage inline passive electronic devices designed to specifically limit the transmitting and receiving RF passband to a single Amateur band. They provide the clear benefit of a dramatically lower noise floor for enhanced single-band weak signal reception that is desired by DXers, elite contesting stations and Field Day operations. Used individually on mono-band radio and antenna combinations, these filters provide the isolation required, eliminating image and harmonic RF interference issues for dedicated mono-band operations in multi-radio contesting environments. Required for use with transmit multiplexers, these filters provide the additional isolation needed to allow multiple transceivers to be operated on different bands simultaneously on the same antenna.
( 8 )
$235.99
4O3A High Power Band Pass Filters
4O3A High Power Band Pass Filters are intended for installation on the output side of a linear amplifier, filtering out harmonics as well as broadband noise from the power amplifier. Typical Applications: • Mitigating intra and inter station interference during contests. • Protecting receiver circuitry from damage. • Reducing RFI egress and ingress during everyday operation. • Enabling full duplex operation (transmitting and receiving simultaneously) on capable transceivers. • High power handling capability – up to 4,500 Watts ICAS. • Exceptional out of band rejection, typically > 55 dB and sometimes as high as 75 dB on adjacent 'contest' bands thanks to the 5 pole filtering.
( 1 )
$515.99
—
$557.99
Antennas-Amplifiers 6290 2m 100W Transmit Band Pass Filters
Antennas-Amplifiers 6290 2m 100W Transmit Band Pass Filters are equally effective for both transmitting and receiving, boasting a super low insertion loss of just 0.15 dB. These Band Pass Filter are designed for use with transceivers and transverters up to 100W output. They are also ideal for placement before any wide band low noise amplifier (LNA) to protect against out-of-band signals. With their super low insertion loss, these 2m Transmit Band Pass Filters are excellent for use before any LNA or to protect receivers from HF transmitters. They effectively suppress signals from HF (1.8 – 28 MHz), 6 meters (50-54 MHz), and 70 cm (430 – 440 MHz) bands. Additionally, these filter helps reduce television interference (TVI) problems, making them particularly useful if you or your neighbors have strong HF, 6 meter, or 70 cm transmitters.
( 1 )
$267.99
DX Engineering HF QRP Bandpass Filters
DX Engineering HF QRP Bandpass Filters are designed to tightly confine both transmitted and receive signals to one specific Amateur band, these filters significantly reduce out of band noise, resulting in a noticeably lower noise floor and improved weak signal reception. In multi operator contest or portable operations, they deliver the essential isolation needed to eliminate image and harmonic interference, ensuring clean mono band performance even in close quarters environments. Each filter features a sharp roll off just outside the band edges, providing exceptional rejection of adjacent band signals and maintaining maximum operating efficiency for QRP applications. Offered for the 80, 40, 20, 15, and 10-meter amateur bands, they install easily in line with the coax feedline using the BNC connectors provided on each end. With power ratings of 20 watts SSB and 5 watts digital, they are ideal for QRP enthusiasts participating in multi operator events such as Field Day, POTA, and SOTA.
Not Yet Reviewed
$69.99
OM Power OM6BPF Automatic Bandpass Filters
OM Power OM6BPF Automatic Bandpass Filters are extremely useful and attractive multiband inline desktop units, which contain six individual high-Q hand-tuned internal band pass filter boards that cover all six Amateur Radio contesting bands: 160, 80, 40, 20, 15 and 10 meters. The OM Power OM6BPF effectively removes unwanted and interfering noise and signals from all but the single band selected for operation. Enjoy ultra-quiet reception and eliminate out-of-band emissions from the transmitted signal. The OM6BPF features low insertion loss, excellent out-of-band rejection, and handles 200 watts key-down RF. The filter design is 50 ohm, and this unit has SO-239 connectors for installation between the transceiver and the input of an amplifier or a tuner. Adding the OM Power OM6BPF will prove its worth everywhere – especially where multiple stations are present on multiple bands from a specific location like DX expeditions, MS/MM contest stations and SO2R stations. The OM6BPF protects the front end of the receiver and also eliminates or reduces interference coming from every other band, for quieter reception at any station. Join the "Contesting Class" of operators who use individual band pass filters, with the convenience of an attractive, self-contained and functional multi-band filter unit. Choose OM Power OM6BPF Automatic Bandpass Filters for your station.
( 1 )
$1,499.99
RF Meca 200W Transmit Band Pass Filters
RF Meca 200W Transmit Band Pass Filters are perfect for contesting at low power and for DXpeditions when multiband antennas are used. These high-quality bandpass filters, from the French manufacturer RF Meca, feature an HF-tight sheet metal housing to maintain optimal functionality and signal integrity. Advantages of RF Meca Bandpass Filters. Reduction of Interference: Band pass filters block unwanted signals outside the target frequency band, minimizing interference from adjacent frequencies and improving signal quality. Improved Signal-to-Noise Ratio (SNR): By suppressing noise and interference outside the desired frequency range, band pass filters enhance the SNR. This makes it easier for the receiver to detect weak signals in the target frequency band, effectively increasing the system's sensitivity. Avoiding Overload: Strong signals outside the target band can overload the receiver and cause distortion. Band pass filters prevent this by allowing only the desired frequency band to pass through. Avoidance of Harmonic Interference: Band pass filters help suppress harmonic and other non-linear distortions that could radiate into neighboring bands.
( 1 )
$239.99
Antennas-Amplifiers 6320 2-meter 1500W Transmit Band Pass Filters
Antennas Amplifiers 6320 2 Meter 1500W Transmit Band Pass Filters are engineered for high performance 144–148MHz operation, delivering exceptionally low loss and outstanding harmonic suppression for demanding transmit and receive environments. Built with ultra high Q coils and capacitors—each exceeding a Q factor of 4500—these filters achieve their low loss performance through precise component selection and meticulous factory alignment. Designed primarily for high power transmitting applications, the 6320 also excels as a receive chain protector, making it suitable for placement ahead of wideband LNAs (low noise amplifier) to shield sensitive front end devices from powerful out of band RF energy. Supporting amplifiers such as the 8877, GS35, GS31, and other tube or transistor based stages up to 1.5kW output, the 6320 delivers exceptional stability under heavy load. Its integrated 12VDC cooling fan ensures reliable thermal management during extended operation, while rugged N type female connectors provide secure, low loss RF connections. The filter's performance makes it ideal for DXpeditions, multi multi contest stations, and installations where strong HF, 6 meter, 1.25 meter, or 70 centimeter signals would otherwise overload receivers or degrade system sensitivity. Offering deep suppression of unwanted signals from HF (1.8–28MHz), 50–54MHz, and 70cm (430–440MHz), the 6320 effectively eliminates harmonics and reduces the risk of TVI and RFI issues—an important advantage for operators working in close proximity residential environments. All performance data for the 6320 is verified using an HP8753ES network analyzer with full two port calibration, ensuring accuracy and real world confidence in its measured attenuation and insertion loss characteristics.
Not Yet Reviewed
$408.99
DX Engineering TWIG Broadcast Interference Filter
Improve the performance of your QRP POTA or SOTA station with the DX Engineering DXE TWIG BCFIL Broadcast Interference (BCI) Filter. Engineered specifically for low power amateur radio applications, this compact module effectively attenuates strong AM broadcast band signals below the 80 meter amateur band. By suppressing these out of band signals, the filter helps lower your receiver's noise floor, resulting in cleaner, more reliable reception of weak amateur radio signals. The DXE TWIG BCFIL is equipped with BNC female connectors for quick, in line installation in the field. Ideal for portable, field, and low power fixed station use, it provides an effortless way to reduce unwanted broadcast interference without adding complexity to your station setup. Features: • Blocks strong AM broadcast band and 1.8 MHz signals below the 80 meter amateur band • Improves receiver noise floor and enhances reception of desired signals • Designed for low power transceivers • Compact in line module with BNC female connectors for easy installation • Ideal for portable POTA and SOTA, mobile, and fixed low power stations Power Rating: For QRP use only — maximum 20 watts PEP. Not suitable for high power transceivers.
Not Yet Reviewed
$49.99
Antennas-Amplifiers 5940 200W 6-meter Band Pass Filters
Antennas-Amplifiers 5940 200W 6-meter Band Pass Filters are extreme low loss 6 meter band pass filters engineered for both transmitting and receiving applications in the 50–52MHz range. Designed for operators who demand clean signals and maximum weak signal performance, these filter excel at pulling DX out of the noise while maintaining exceptional stability under real world RF conditions. With an impressively low insertion loss, and attenuation of just 0.11dB, they are ideal for placement ahead of any LNA (low noise amplifier) , safeguarding sensitive receiver front ends from strong HF transmitters during DXpeditions and multi multi contest environments. The Antennas-Amplifiers 5940 band pass filters deliver powerful suppression of unwanted harmonics—including those around 100MHz, 150MHz, and beyond—ensuring smooth operation and preventing interference from creeping into nearby bands. Built with premium grade components and meticulous filter design, the 5940 provides reliable, repeatable performance while eliminating harmonic emissions from linear amplifiers. Whether used for transmission, reception, or both, these Antennas-Amplifiers 5940 200W 6-meter Band Pass Filters deliver the clarity, protection, and efficiency serious VHF operators expect.
Not Yet Reviewed
$273.99
Antennas-Amplifiers 5960 6-meter 1500W Transmit Band Pass Filters
Antennas Amplifiers 5960 6 Meter 1500W Transmit Band Pass Filters deliver exceptional performance on the 6-meter Magic Band, providing clean, reliable operation across 50–51MHz for high power stations. Engineered with precision wound high Q coils and capacitors boasting a Q factor exceeding 4000, this filter achieves remarkably low insertion loss through meticulous component selection and exacting tuning. Designed to operate seamlessly with high power linear amplifiers—including 8877, GS35, GS31, 2×GI7B, and other tubes up to 1.5kW output—the 5960 ensures pure, interference free transmission while offering equally strong performance as a receiving filter. Ideal for protecting sensitive front end devices, the 5960 can be placed ahead of a wideband LNA (low noise amplifier) such as those using the PGA 103+, safeguarding against damaging out of band energy in demanding multi multi setups, DXpeditions, or high RF noise environments. These filter deliver outstanding harmonic suppression, effectively eliminating spurious energy around100MHz, 150MHz, and beyond, while also shielding equipment from nearby HF transmitters. The result is a filter that not only enhances transmission purity but also fortifies receiving chains against interference. Through careful engineering and superior component quality, the 5960 provides the robust performance, stability, and signal cleanliness expected from a premium Antennas Amplifiers RF solution.
( 1 )
$368.99
Antennas-Amplifiers 5560 WARC 30-meter 3kW Transmit Band Pass Filters
Antennas-Amplifiers 5560 WARC 30-meter 3kW Transmit Band Pass Filters are engineered for operators who demand absolute excellence on the 30 meter band. Designed for high power performance from 10.1 to 10.15 MHz, these filters deliver exceptionally low insertion loss—just 0.18 dB—ensuring that every watt counts while preserving outstanding signal integrity. Built for high power multi station environments, they shine in contests, special event operations, field deployments, and any scenario where strong out of band signals threaten receiver performance. With extreme out of band suppression, silver plated SO 239 connectors, and a rugged powder coated aluminum enclosure, these filters combine durability with world class RF purity. Although rated for 2000W, they are purpose designed with overhead to comfortably support up to 3kW, making them equally suited for both high power transmitters and low noise receive paths. As part of the WARC family of amateur bands—30 m, 17 m, and 12 m—these filters deliver the clean, interference free operation that serious operators rely on for reliable communication and superior operating efficiency. Perfect for stations of any size, these 30 meter WARC filters provide the ultra low loss, robust construction, and premium performance that define Antennas Amplifiers' commitment to excellence.
Not Yet Reviewed
$535.99
Antennas-Amplifiers 5970 6-meter 4kW Low Loss Band Pass Filters
Antennas-Amplifiers 5970 6 meter 4 kW Low-Loss Band Pass Filters are designed for high-performance operation in demanding RF environments. Built with precision high Q inductors and capacitors (Q > 4000), the filter achieves exceptionally low insertion loss through careful engineering and tuning. Intended to be used with linear amplifiers 8877, GS35, GS31, 2xGI7B, and with other tubes with up to 4 kW output. When placed ahead of sensitive front-end equipment, it provides effective protection and signal conditioning, shielding LNAs such as the PGA 103+ from strong out-of-band signals while improving the performance of wideband SDR receivers on the 6 meter band. It is well suited for challenging applications including DX expeditions and multi multi station environments, offering strong suppression of harmonics (100 MHz, 150 MHz, and higher), reducing HF interference, and minimizing out-of-band noise across a wide frequency range.
Not Yet Reviewed
$428.99
Antennas-Amplifier 5555 60-meter 2kW Transmit Band Pass Filters
Antennas-Amplifier 5555 60-meter 2kW Transmit Band Pass Filters deliver uncompromising RF performance for operators who demand maximum signal purity, rugged reliability, and contest grade interference rejection. Engineered for the 60 meter band (5.23–5.43 MHz), this heavy duty filter supports an impressive 2000W PEP while maintaining ultra clean signal characteristics ideal for high power stations, multi operator environments, and mission critical communications. Built around a high Q resonant architecture, the 5555 provides >37 dB of out of band attenuation and an exceptionally low <0.2 dB insertion loss, ensuring your transmitted and received signals remain strong, clean, and uncorrupted. The unit features SO 239 connectors and incorporates an integrated 13.8 VDC fan cooling system to maintain thermal stability during extended high duty cycle operation. As part of Antennas Amplifiers' industry leading lineup, the 5555 reflects the company's long standing commitment to precision engineering and RF excellence. Known for their advanced antennas, low noise components, and high performance filters, Antennas Amplifiers designs each product for serious operators who expect superior durability, accuracy, and efficiency. Their filters are renowned for robust construction, minimal loss, and consistent performance even under demanding contest and DX conditions.
Not Yet Reviewed
$535.99
Antennas-Amplifiers 6550 70cm 2500W Band Pass Filters
Antennas-Amplifiers 6550 70cm 2500W Band Pass Filters are extreme power 70cm band pass filters engineered to handle the most demanding UHF stations. Designed for operation across the 430–450MHz amateur band, these filters support RF power levels up to 2.5kW, making them suitable for high power stations and commercial grade 70cm linear amplifiers. Despite their high power capability, the 6550 series achieves an exceptionally low insertion loss of just 0.06 dB, and with the integrated 12VDC cooling fan, they maintain efficient signal transfer while keeping thermal rise to a minimum even during continuous high power operation. Installed after a powerful amplifier, the filter provides outstanding suppression of unwanted emissions—attenuating lower frequency signals by 23 to 100dB and reducing harmonics by 26 to 60dB, depending on frequency. Thanks to its ultra low loss and clean passband, the 6550 also performs exceptionally well in receive only applications. It can be used ahead of sensitive low noise preamplifiers employing ATF, PGA, SAV, or SKY devices, offering overload protection without degrading noise performance.
Not Yet Reviewed
$534.99
Clearance
Low Band Systems HF Transmit Band Pass Filters
NOTICE: Due to materials supply and logistical issues, resupply of Low Band Systems products will be delayed for an indefinite period. Low Band Systems HF Transmit Band Pass Filters are very high quality multi-stage devices designed to specifically limit the RF band pass to a single Amateur band. They eliminate image and harmonic RF interference issues for dedicated mono-band operations in multi-radio contesting environments. Required for use with transmit multiplexers, these passive filters provide the additional isolation needed to allow multiple transceivers to be operated on different bands simultaneously on the same antenna. Used individually on mono-band radio and antenna combinations, these filters provide the isolation required in multi-radio contest stations. Low Band Systems band pass filters are available for each of the ten HF Amateur Bands in 200, 500 and 1,500 watt models, and 2,000 watt models for the main contesting bands of 160, 80, 40, 20 ,15 and 10 meters. Their unique aluminum enclosures, some with fans, are laser cut with "Perfo-Box" on the side and their power handling and band of operation are stenciled chassis cutouts in European nomenclature, such as "3,5 MHz" for the 80 meter filter, for example. Their permanent demarcation allows immediate identification, preventing any future trouble with faded or missing printed labels. Supplied only with standard UHF Female/SO-239 connectors, these HF Transmit Band Pass Filters achieve over 60 dB of out-of-band suppression that virtually eliminates out of band noise and interfering signals. They are designed to provide a sharp roll off just outside each Amateur band; just below 3.5 MHz and just above 4.0 MHz for the 80 meter filter for example. Low Band Systems filters are the first choice of major multi-multi contest stations around the world! They provide the clear benefit of a dramatically lower noise floor for enhanced single-band weak signal reception desired for elite contest and Field Day operations. Low Band Systems Band Pass Filters are used in conjunction with their multiplexers, also known as multi-band transmit combiners. Low Band Systems Diplexers, Triplexers, Quadplexers and Pentaplexers, also available from DX Engineering, provide good levels of isolation between band ports, but band pass filters are also needed for multi- transmitter operation. This is because the multiplexer's main purpose is to balance the impedances for the multiple-transceiver/single multi-band antenna stations. They provide UHF Female/SO-239 connections for multiple 50-ohm transceivers to be connected to a single 50-ohm feedline. So, band pass filters are REQUIRED for each multiplexer band input to provide the additional isolation required to allow multiple transceiver setups to work. The transceivers for each band are connected to their associated band pass filter, and then to the multiplex device such as a triplexer, which is connected to a tri-band beam, for example. All transceivers can operate simultaneously with up to 80 dB of isolation, unhindered by the signals from the other connected radios operating on the other bands on the same antenna! Achieve the advanced operational advantages that these exceptional filters and multiplexers provide. Order Low Band Systems HF Transmit Band Pass Filters from DX Engineering! NOTE: Filters made for 160 meters are 2.0 MHz low pass models to prevent harmonics on higher bands. They do not reject frequencies below 1.8 MHz. If AM broadcast interference is a problem, an additional BCI filter should be used. After better antennas, these filters are suggested as the most important multi-radio station upgrade by top contest station builders and operators. Low Band Systems HF Transmit Band Pass Filters simply allow more contacts to be made with worldwide DX stations and DXpeditions.
( 28 )
$359.99
$269.99