Filters
3 Results Found For ""ps 2b""
DX Engineering PRO-STACK Broadband Antenna Phasing Switches
DX Engineering PRO-STACK Broadband Antenna Phasing Switches are newly designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced operation. There is no need for coaxial delay lines with the DX Engineering PRO-STACK switches. Just connect your antennas to the phasing switch controller with equal-length 50 ohm lines. PRO-STACK switch units are available with high-quality PTFE-silver plated SO-239 (UHF female) connectors. These relay units are 1-of-3 source voltage controlled at 12-15VDC over a four conductor cable. A matching Control Console is available separately or is included in the PRO-STACK System. These phasing switches can be used for any applications that require the following four basic antenna feed selections: both antenna ports in-phase, both antenna ports out-of-phase, antenna port 1 only, and antenna port 2 only. The default is both output ports in-phase. Impedance matching automatically changes when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically greater than 1/2-wavelength free space. Since the DX Engineering PRO-STACK Broadband Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of two, and then using a third DX Engineering control console to combine the first two sets. PRO-STACK switches can also be used to feed three quarter wave resonant vertical antennas for a high-gain 4-pattern array. In this arrangement, the center #2 passive element is directly grounded to a good ground radial system at all times, while the end elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in Documentation. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Switches include these great features: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High-impact RF shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12 VDC relay operation, even on battery or solar power * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly
( 1 )
$699.99
—
$740.00
DX Engineering PRO-STACK Broadband Antenna Phasing Systems
DX Engineering PRO-STACK Broadband Antenna Phasing Systems are designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced directional pattern selections and dramatically improved HF operations. There is no need for special coaxial delay lines with the DX Engineering PRO-STACK systems. Just connect your antennas to the system relay unit with equal-length 50-ohm coaxial cable assemblies. The PRO-STACK switch relay units are available with high-quality PTFE-silver plated SO-239, UHF female connectors. The matching PRO-STACK Control Console operates the system with a 1-of-3 source voltage control format at 12-15V DC with a user supplied four conductor control cable to achieve four different antenna phasing selections. PRO-STACK Broadband Antenna Phasing Systems operate across the 160 to 10 meter range. They have two antenna ports that can be used for any application requiring the four basic selections: 1. BIP - Both antenna ports In-Phase 2. BOP - Both antenna ports Out-of-Phase 3. BOTTOM - Antenna port 1 only 4. TOP - Antenna port 2 only. The unpowered default is 1 - Both ports In-Phase. Impedance matching is automatic in the PRO-STACK even when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically with greater than one half wavelength free space. Since the DX Engineering PRO-STACK Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of PRO-STACKS, with a third DX Engineering PRO-STACK to combine the first two. PRO-STACK systems may also be used to feed quarter-wave resonant vertical antennas for a high-gain, 4-pattern array. This arrangement requires three verticals, with the center #2 passive antenna element directly grounded to the system ground radial system at all times, while elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in "Documentation" tab. The full- color printed manual is included with the system relay unit. PRO-STACK Broadband Antenna Phasing Systems are available as separate Relay Units for operators who have automated BCD switching devices, and as packaged systems with Relay Unit and matching manual Control Console. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Systems include: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High impact shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12V relay operation * DC-powered control console allows battery or solar emergency operation * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly Dominate the airwaves with DX Engineering PRO-STACK Broadband Antenna Phasing Systems. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$895.98
—
$935.99
DX Engineering PRO-STACK 2 Control Consoles
DX Engineering PRO-STACK 2 Control Consoles are designed for use with DX Engineering PS-2 and PS-2B switches. They require 12 Vdc well-filtered at 2 amps (fused) minimum.
( 1 )
$195.99