Filters
2 Results Found For "Receive Array"
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
Hamplus Four Stack II Systems
Hamplus Four Stack II Systems makes it possible to easily and quickly change selections of any in-phase combination of two, three, or four stacked HF beam antennas or an array of HF phased vertical antennas. Plus, Four Stack II Systems can be combined to control antenna selections on any of the array switches by any of the multiple system Control Consoles. This is possible with simple patch cable networking. Up to four operating positions can have access to four different stacked arrays. The Hamplus Four Stack II System provides unprecedented control of your multiple antenna arrays. The 4-Stack Control Console has five illuminated pushbuttons; ANT 1 through 4 select stacked antennas and ENTER aids in programming. Each antenna selection keys works as a one-touch ON, one-touch OFF method, so it is easy to control which of antennas you want to use at a certain time. Trying different combinations of antennas for the transmission and reception can be accomplished independently, quickly and easily. Arrays can be configured differently for receive and transmit without manually switching back and forth. The system is managed and supervised by a microcontroller that has internal software designed to meet the various system functions and easy operation. All control boxes can be interconnected so that any remote console can command any antenna array switch box. The Four Stack II switch box is rugged and capable, with a better design for mounting outdoors, near or under antenna arrays. No extra or special housings are needed. With the internally connected controller cable, the system is an easy, plug-and-play operation. The Four Stack II is available with either Type N female or UHF female (SO-239) connectors for your array. The Four Stack II is rated for 3,000 W maximum RF power and covers 1.8 to 30 MHz. Connection to 50 ohm, low SWR antennas with 50 ohm coaxial cable is required. All combinations of antennas are in-phase only. Achieve complete control of your antenna arrays with Hamplus Four Stack II Stack Systems from DX Engineering!
Not Yet Reviewed
$899.99