Availability
28 Results Found For "in-line"
Telrex® Log Periodic Antennas
Telrex® Log Periodic Antennas are produced exclusively by DX Engineering for a variety of Commercial, Military and Industrial specialized and demanding applications. Telrex® Antennas are engineered using state-of-the-art design methods, are machined with maximum precision, and are manufactured with the finest materials available. Simply stated, Telrex® Antennas fulfill the company philosophy of being "The Best Antenna Available." Telrex® Log Periodic Antennas offer superior gain, high front to back ratios and very low SWR across the entire frequency range of the array. As shown, model TEL-143042-135 antennas are custom designed to cover 14 through 30 MHz, featuring 16 elements on a 42 ft. long, 3 in. diameter extra-heavy duty boom. Multi-dimensional boom support systems secure these rugged LPDAs with RF transparent, 6,700 pound breaking-strength Phillystran™ guy line. Featuring self-supporting large-diameter reinforced elements, these antennas are built to achieve 135 mph wind survivability per the EIA-222-C Specification. All structural parts and elements of these antennas are made from 6061-T6 aluminum and stainless steel. The longest elements of Telrex® model TEL-143042-135 are 36 feet long, and yield a turning radius of approximately 27 feet 8 inches, with a wind load of approximately 22 square feet. These antennas are made to handle 10 kW or more, depending upon the user requirement. The supplied DX Engineering balun will handle 5 kW CW and 10 kW SSB, with higher power baluns available. Performance of TEL-142042-135 antennas includes average free space gain of 7.5 dBi, front-to-back over 25 dB and SWR under 1.5:1 across the entire operating frequency range of 14 through 30 MHz. A 3-inch O.D. mast with a high-end rotator, or a rotating tower, is strongly recommended for the TEL-143042-135; which weighs over 350 pounds. For the proper crane installation of Telrex® Antennas, DX Engineering recommends contacting a professional tower company with the proper equipment for handling such a large antenna. Telrex® Antennas offer rotatable and fixed Log Periodic and Single Frequency Yagi antennas, with customized gain performance and enhanced wind survival, to achieve the institutional customer's specific objectives, creating an unsurpassed HF directional antenna system. Contact DX Engineering for more information on Telrex® Antennas.
Not Yet Reviewed
$10,000.00
WiMo - EAntennas 2850MOX Dual Band Moxon Antenna for 10 and 6 Meters
WiMo - EAntennas 2850MOX Dual Band Moxon Antenna for 10 and 6 Meters is perfect for Sporadic-E QSOs on these bands, as well as for local and regional weak-signal operations on SSB, CW, and Digital Modes. The 2850MOX is a horizontally polarized directional antenna that offers high gain for its very compact dimensions. This antenna features an additional third element for especially good gain on the 6 meter band. The 2850MOX Dual Band Moxon advantages: - Radiator configuration offers high gain: 8.3 dBi - 6m, 10.5 dBi - 10m - Relatively compact dimensions - Front-to-back ratio is very good; 12dB on 6m, 21dB on 10m - Flat SWR curve over a wide bandwidth The 2850MOX Dual Band Antenna covers 28-29.7 and 50-52 MHz, requires only one coax feed line, and the included 3kW balun has an SO-239 connector. It has a short boom of 180cm (5.9 ft.) and a low weight of only 6.2kg (13.67 lbs.). Ideal for the restricted property and for temporary or portable operations, this antenna can fit well on an existing mast where space is limited. Join the fun of weak-signal operations, locally, regionally or long range via Sporadic-E for DXing or contesting on the 10 and 6 meter bands. The 2850MOX offers high performance with very reasonable dimensions at a low cost.
( 8 )
$469.99
Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles
Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles provide coverage of one specific HF band. Built as a full-size resonant dipole, Diex aluminum tubing antennas provide excellent performance and are handled with a lighter tower and smaller rotator, offering a very economical alternative to the expense of a Yagi. Crafted with precision in Brazil using quality materials, they are designed to withstand tough environments assuring long-lasting service. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these single-band HF antennas provide very good directionality depending upon installed height above ground. They feature the flexibility of physical adjustments to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Full Size Rigid Rotatable Dipoles power handling is 1,500W+ PEP, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 6 )
$115.99
—
$209.99
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles
Diex Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Multi-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 3 )
$409.99
—
$765.99
EAntenna HF Rotatable Antennas
EAntenna HF Rotatable Antennas include a comprehensive range of mono-band and multi-band Yagi beams and rotatable Delta Loops and Dipoles. Find the band coverage and performance antenna of your dreams right here. For example, the exciting EAntenna 59+ provides great performance on 20, 17, 15, 12 and 10 meters! Check out the specs on this great line of HF directional antennas. DX Engineering offers EAntenna because their attention to manufacturing detail is excellent! Their Yagi, log periodic, and rotatable dipole antennas are built with high-quality stainless steel hardware and aircraft-grade aluminum. As you look through these selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce every one of the EAntenna premier HF beam antennas and state-of-the-art VHF and UHF Yagi antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 mph wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus, we can ship these great antennas internationally! When you're making plans for a new antenna at your station, look no further for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version.
( 47 )
$355.99
—
$2,215.99
DX Engineering Skyhawk Tri-Band Yagi Antennas
DX Engineering Skyhawk™ Tri-Band Yagi Antennas are the choice of experienced DXers, especially if your interest is HF contesting. DX Engineering Skyhawk™ antennas provide the highest payback in performance and operating pleasure compared to any other single component in your station. The only better antenna choice is to combine one of our DX Engineering Skylark™ Dual-Band Yagi Antennas with the Skyhawk™! These well-designed, single-tower systems offer outstanding performance without the headaches of maintaining more substantial antenna farms. DX Engineering Skyhawk™ antennas reflect the latest computer-optimized design for maximum gain and bandwidth. They are built from the finest materials utilizing heavy-duty aluminum and all stainless steel hardware. Skyhawk™ operates from a single feed line and has a 90 mph wind survival rating! Have you ever had to replace a rotor in February? Skyhawk™ antennas offer minimal wind-loading for their size and are torque-balanced to reduce wear and tear on your rotor. Assembly is easy, as tower top adjustments have been eliminated and the elements are truly locked in place. DX Engineering Skyhawk™ features include: * 90 MPH wind survival rating * EZ-mount system for attaching antenna to mast * All parts de-burred * Stainless steel pop-riveted element locking * No user adjustment - just assemble it and put it up Additional specifications include: 20 meters: * Three elements * Effective boom length: 23 ft. * VSWR: less than 1.4:1 between 14.0 and 14.35 MHz, measured at feed-point * Front to back: >20 dB across the entire band * F/B peaks at 14.150 MHz at 21 dB * Gain: better than 7 dBi across band * 7.4 dBi gain at 14.350 MHz * Front lobe beam width (-3dB points) 63 degrees 15 meters: * Three elements * Effective boom length: 15 ft., 6 in. * VSWR: less than 1.5:1 between 21.0 and 21.45 MHz, measured at feed-point * Front to back: >16 dB across the entire band * F/B peaks at 21.350 at 24.5 dB * Gain: better than 7 dBi across band * 7.6 dBi gain at 21.45 MHz * Front lobe beam width (-3dB points) 56 degrees 10 meters: * Four elements * Effective boom length: 16 ft., 9 in. * VSWR: less than 1.5:1 between 28.0 and 28.9 MHz, measured at feed-point * Front to back: >14 dB across the entire band * F/B peaks at 28.5 at 21 dB * Gain: better than 7.7 dBi across band * 9.2 dBi gain at 28.9 MHz * Front lobe beam width (-3dB points) 47 degrees Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. So, what are you waiting for? Get a DX Engineering Skyhawk™ Tri-Band Yagi atop your tower, hook up your coax, and start working some serious DX! You've always heard about DX Engineering quality. DX Engineering Skyhawk™ Tri-Band Yagi Antennas are available now. Order yours today and enjoy great DXing with quality and value!
( 3 )
$2,378.97
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles
Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of a single HF band that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique single-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes for the 20, 30 and 60M models, 1000W PEP for 80M and 1500W PEP for 40M, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 7 )
$215.99
—
$679.99
Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles
Diex Antennas Two-Band Shortened Rigid Rotatable Dipoles provide coil-shortened specialized coverage of two non-adjacent HF bands that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique two-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Two-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 7 )
$215.99
—
$309.99
InnovAntennas DXR Series Multi-Band HF Beams
InnovAntennas DXR Series Multi-Band HF Beams have short booms with full-size elements or capacity-loaded shortened elements, all with excellent performance, making them very popular internationally. The DXR Series interlaced-element antennas, optimized by G0KSC over a long period of time, achieve the best possible balance between compact size and performance. For the DXR Series Multi-band Yagis, equal attention was paid to a very solid construction and sufficiently small component and packaging size, to keep shipping costs within reasonable limits. Click on any model listed for specific details and specifications. InnovAntennas DXR Series Multi-Band HF Beams are available exclusively from DX Engineering in North America. Important features of InnovAntennas DXR Series Multi-Band HF Beams: * No traps, matching links, or hairpins * Only one feed line for all bands * Careful selection of materials without regard to cost * Very robust construction with still manageable package size The DXR Series beams use a 1.97 x 1.97 in. (50 x 50 mm) square boom with 0.078 in. (2 mm) wall thickness. A square boom has the advantage that the elements cannot twist in the plane. On the other hand, it is slightly heavier than a round boom of the same stiffness. The DXR Yagis do not require any bracing of the boom. The longest elements are 1.378 in. (35 mm) diameter in the middle and taper relatively quickly to achieve a good compromise between weight and strength. This construction also helps to avoid constant vibration even in light winds. With these multi-band Yagis, care has been taken to ensure that there are never more than the elements of three bands nested within each other. This is because each additional element for one band can cause interference on another band. This negative effect was avoided by careful manual optimization. The result is the best possible matching over a wider band range than other antenna designs. In most cases, no tuner is necessary; the SWR minimum can be precisely set by adjusting the element lengths. Due to the robust construction and the absence of moving or electrically active components such as coils, traps, hairpins, etc., an InnovAntennas DXR beam is maintenance-free for many years. The insulators are UV-resistant and designed for a wide temperature range. The mounting hardware uses sea-water resistant stainless steel and the aluminum is type T6 6066/6082, which is also used in aviation. It is nice not to have to climb the mast every year to maintain the antenna. The DXR Series Multiband beams are designed to require only one feed line. This makes installation on a mast with a rotor very easy. And the use of modern SDR transceivers, which allow the observation of several bands at the same time, becomes really useful. The one feed line is connected directly to the solid distribution rails of the fed elements. By avoiding baluns, matching elements, traps, or hairpins for tuning, transmit power is only limited by the coaxial cable and connectors. Note: Front-to-back ratio (F/B) and SWR bandwidth data for the DXR Series will be added as it becomes available. Many models of the DXR Series are available as a "super-compact" version, on which the longest elements have been shortened with capacity hats, thus reducing their turning radius considerably. The installation of these impressive antennas is possible even where space is limited.
( 4 )
$1,439.99
—
$2,097.99
InnovAntennas 13 Element HF Log Periodic Dipole Arrays
InnovAntennas 13 Element HF Log Periodic Dipole Arrays provide super wideband, high performance from 10 to 54 MHz. InnovAntennas LPDA's are designed using the very latest computer optimization techniques such as Dense Element Log Periodic Dipole Array (DELPA). This type of antenna was designed with specifications for a broadcasting center. Example photos display the DELPA-13 installed at the broadcast center. If you are looking for the best of the best from both a performance and mechanical construction perspective, then look no further than InnovAntennas LPDA! You have come to the right place! The DELPA-13 has 13 elements placed above the 37.73 ft. (11.5 m) by 3 in. (76mm) square boom, from which all elements are insulated. The feed point is 200 ohm and includes a 20 kW 4:1 balun. Feed line between the elements is silver plated hard-drawn copper wire spaced to produce a 300 ohm balanced-line feed. The DELPA-13 provides excellent, consistent results for the frequency range it covers with a relatively limited number of elements. Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Silver plated balanced line feed * Mill finished for highest levels of accuracy and performance Performance specifications of InnovAntennas 13 Element HF Log Periodic Dipole Array DELPA-13: * Typical forward gain: 6dBi * Typical F/B: 15dB * Gain at 33 ft. (10 m) above ground: 10dBi * Power rating: 15 kw+ (further limited by feedline and connectors) * Feed impedance: 50 Ohm * Boom length: 37.73 ft. (11.5 m) * Weight: 165.35 lbs. (75 kg) * Turning radius: 20.67 ft. (6.3 m) * Wind loading: Upon application * Wind survival: 100 mph (160 kph)
Not Yet Reviewed
$4,100.00
Diex Antennas DXM Series 2 Element 40 meter Directional Antennas
Diex Antennas DXM Series Single-Band Shortened 2 Element Directional Antennas provide coil-shortened specialized coverage of a single HF band that can complement band coverage of existing antennas. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotatable mast, these unique single-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of coil-shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. Diex Antennas Single-Band Shortened Rigid Rotatable Dipoles power handling is 300W PEP SSB and 100W maximum for digital modes for the 20, 30 and 60M models, 1000W PEP for 80M and 1500W PEP for 40M, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
Not Yet Reviewed
$1,129.99
Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles
Diex Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles offer high performance multi-band HF operations, and they are an excellent choice where there's not enough space for a full-size dipole or Yagi. Crafted with precision in Brazil using quality materials, these aluminum tubing antennas are designed to withstand tough environments assuring long-lasting, exceptional performance. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these unique multi-band HF antennas provide high-band directionality depending upon installed height above ground. Given the nature of shortened low-band antennas with limited SWR bandwidth, these antennas feature the flexibility of physical adjustment to set the lowest SWR to a specific frequency. DIEX Antennas Two-Band Trap Shortened Rigid Rotatable Dipoles power handling is 1500W PEP SSB, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that a directional HF antenna should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas.
( 2 )
$236.79
—
$295.99
Momobeam TRI10 Multiband HF Yagi Antennas
Momobeam TRI10 Multiband HF Yagi Antennas are a widely favored, medium sized triband Yagi antenna system that delivers impressive performance at an attractive price point. Covering the 20, 15, and 10 meter bands through a single coaxial feed line, these antennas offer a fully optimized element configuration for each band. On 20 and 15 meters, they feature three full size elements—reflector, driver, and director—while the 10 meter band incorporates four elements arranged as a reflector, driver, and two directors for enhanced gain and directivity. Engineered for convenience, TRI10 Yagi antennas require no calibration or band specific adjustments; during assembly, there is no need to choose between CW and SSB segments. They provide flat SWR below 1.5:1 across all operating bands, making them perfectly suited for modern transceivers and high power linear amplifiers. Each TRI10 is supplied with an assembly tool and spare parts, including bolts and aluminum tubing, ensuring operators have everything needed for smooth installation. The high quality 3kW RF choke balun—often an extra cost option with other manufacturers—is included as standard to ensure efficient, trouble free operation. Built on a robust square boom, these antennas offer long term stability, precise element alignment, and a clean, professional appearance. All hardware ships in clearly labeled bags, and every aluminum tube is individually marked, making assembly simple, intuitive, and fast.
Not Yet Reviewed
$2,230.99
DX Engineering PRO-STACK Broadband Antenna Phasing Switches
DX Engineering PRO-STACK Broadband Antenna Phasing Switches are newly designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced operation. There is no need for coaxial delay lines with the DX Engineering PRO-STACK switches. Just connect your antennas to the phasing switch controller with equal-length 50 ohm lines. PRO-STACK switch units are available with high-quality PTFE-silver plated SO-239 (UHF female) connectors. These relay units are 1-of-3 source voltage controlled at 12-15VDC over a four conductor cable. A matching Control Console is available separately or is included in the PRO-STACK System. These phasing switches can be used for any applications that require the following four basic antenna feed selections: both antenna ports in-phase, both antenna ports out-of-phase, antenna port 1 only, and antenna port 2 only. The default is both output ports in-phase. Impedance matching automatically changes when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically greater than 1/2-wavelength free space. Since the DX Engineering PRO-STACK Broadband Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of two, and then using a third DX Engineering control console to combine the first two sets. PRO-STACK switches can also be used to feed three quarter wave resonant vertical antennas for a high-gain 4-pattern array. In this arrangement, the center #2 passive element is directly grounded to a good ground radial system at all times, while the end elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in Documentation. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Switches include these great features: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High-impact RF shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12 VDC relay operation, even on battery or solar power * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly
( 1 )
$699.99
—
$740.00
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna
InnovAntennas 10 Element HF Band Optimized Log Periodic Antenna is a super wideband, high performance beam that covers the frequency range of 14 to 30 MHz. The advantage of this antenna type is the extreme broadband performance with an even gain curve without dips. This makes this antenna suitable not only for amateur radio, but also for commercial services and for demanding SWLs. Through careful calculations and practical optimization, the spacing and lengths of the elements have been chosen to favor the amateur radio bands 20/17/15/12 and 10 meters, creating the Band Optimized Log Periodic Antenna, hence the name "BOLPA". Hundreds of hours optimizing both SWR and performance within the Amateur bands resulted in exceptional mono-band style performance for InnovAntennas BOLPA-10. This antenna provides a uniform gain of approximately 7 dBi over the entire frequency range and a front-to-back ratio over 20 dB on all but 12 meters with an SWR of mostly better than 1.5:1. The boom length of 25.3 ft. (7.7m) is relatively short for an antenna of this type. Since only one 50 ohm feed line is necessary, this broadband antenna is especially well suited for use with modern SDR transceivers that are able to receive on several HF bands simultaneously. This LPDA's double boom is made of 1.75 in. (44 mm) square aluminum, each supporting the alternately arranged elements and provides the support for the bracing in the middle. Both boom tubes serve as feed lines for high power operations on any band with no tuning adjustments necessary. A common mode choke or balun may be used. High quality aircraft grade aluminum, as well as stainless steel parts, means the BOLPA-10 is also designed for adverse weather and high wind speeds of up to 99 mph (160 kph). Some of InnovAntennas HF Log Periodic Dipole Array mechanical design benefits include: * Marine grade stainless steel hardware (wherever possible) * Integrated feed line/boom for maximum efficiency, minimum wind-load * Mill finished for highest levels of accuracy and performance * First-of-kind "Band Optimized" LPDAs by G0KSC InnovAntennas BOLPA-10 technical performance data: * Gain: 6.9 to 7.5 dBi (4.75 to 5.4 dBd) * Gain at 33 ft. (10m) above ground at 14.150 MHz: 11.56 dBi (including ground gain) * Typical F/B: Over 20 dB * Power rating: 5,000 watts (further limited by feedline and connectors) * Feed impedance: 50 ohm, stud connections * Boom length: 25.3 ft. (7.7 m) * Longest element: 42.6 ft. (13 m)
Not Yet Reviewed
$2,190.00
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units offer the ultimate performance for combining three identical Yagi or Log Periodic directional antennas and may be used for vertical antennas in a phased array that cover any band, from 160 through 10 meters. Pro-Stack frequency independent broadband phasing devices operate optimally with three properly spaced mono-band antennas, but can be used with three identical stacked multi-band beam antennas, for pattern and null steering that wins contests and snags the rarest DX! Signals arrive at your antenna system from different azimuth directions and different elevation angles. Adding a stacking phasing system to a rotational array adds the ability to steer the pattern of the antenna array in two planes, azimuth and elevation, and to move the major lobe and nulls. The greatest advantage of Pro-Stack arrays is the ability to move harmful pattern nulls away from signal arrival angles. While gain makes a marginal improvement, moving a 20 to 40 dB null can be a phenomenal change, so the Pro-Stack can make the difference between a barely readable and a strong signal, providing the performance edge needed to work rare DX - and win contests. DXE-PS-3B Pro-Stack Phasing Units are 50 ohm relay systems that handle up to 5 kW. A separate user-supplied automated controller or the optional DX Engineering DXE-EC-PS3 Control Console for these 12-position rotary switch selections: - Three antenna ports in phase, default with no power to control console. - Antenna port 1 only - Antenna port 2 only - Antenna port 3 only - Port 2 out of phase, Port 3 in phase - Port 1 out of phase, Port 3 in phase - Port 1 out of phase, Port 2 in phase - Ports 2 and 3 in phase - Ports 1 and 3 in phase - Ports 1 and 2 in phase - Ports 1 and 2 in phase, Port 3 out of phase - Ports 1 and 3 in phase, Port 2 out of phase - Port 1 out of phase, Ports 2 and 3 in phase These PRO-STACK units may also be used for other applications requiring these feedline selections. To ensure lowest SWR, impedance matching automatically changes when any antenna is disabled. By switching between antennas at different heights above ground and/or changing the phase relationship between multiple antennas. The old standard system in stacks was to activate or disable specific antennas in the stack to change pattern. However, with the Pro-Stack system, gain remains higher when all antennas are driven and phase is changed, plus this system allows phase inversion as well as the ability to switch any single antenna out of the array. DXE-PS-3B Broadband Phasing Units provide the greatest flexibility for three identical antennas. This relay unit contains a broad-bandwidth high-power 2:1 impedance matching transformer. This eliminates common requirements of using mixtures of 75 ohm and 50 ohm phasing or delay cables for impedance matching. Feedlines to each antenna from the relay unit must be the same cable of the same length and match the antenna impedance. DXE-PS-3B Pro-Stack Broadband Three Antenna Phasing Units feature: - Power Handling up to 5 kW - Broad band coverage on 160-10 meters - RF Shielded Weatherproof Housing - unique protection - DXE-PS-3B has High-RF tolerant, silver - PTFE UHF connectors - DXE-PS-3BDIN has Amphenol Connex 7/16 DIN Panel Connectors - DXE-PS-3BN-P are made with high-quality silver-PTFE Type N female connectors - Proven high current DX Engineering RF Relays - Safe 12 volt dc relay operation - MOV surge protection on control lines - RoHS compliant assembly Get a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System for your winning antenna array.
Not Yet Reviewed
$895.99
—
$999.99
DX Engineering PS-3B PRO-STACK Three Antenna Phasing System
Dominate the airwaves with a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System. Achieve ultimate array control and performance with three identical Yagi or Log Periodic directional antennas or use the system for vertical antennas in a phased array. DXE-PS-3B Pro-Stack Units are frequency independent broadband phasing devices that operate with three antennas on any bands, from 160 through 10 meters. Select from twelve combinations of in-phase and out-of-phase for pattern and null steering that wins contests and snags the rarest DX! DXE-PS-3B-P PRO-STACK Three Antenna Phasing Systems consist of one DXE-PS-3B Relay Unit and one DXE-EC-PS3 Control Console with manual 12-position rotary switch. This advanced system requires only 9-conductor control cable and standard 50-ohm feedlines of equal lengths to each antenna. DXE-PS-3B Pro-Stack Broadband Three Antenna Phasing Systems offer these compelling features: - Power Handling up to 5 kW - Broad band coverage on 160-10 meters - RF Shielded Weatherproof Housing - unique protection - DXE-PS-3B has High-RF tolerant, silver - PTFE SO-239 (UHF female) connectors - DXE-PS-3BN-P are high-quality silver-PTFE Type N female connectors - DXE-PS-3BDIN has Amphenol Connex 7-16 DIN Panel Connectors - Proven high current DX Engineering RF Relays - Safe 12 volt DC relay operation - MOV surge protection on control lines - RoHS compliant assembly DXE-PS-3B Broadband Phasing Units provide the greatest flexibility for three identical antennas. This relay unit contains a broad-bandwidth high-power 2:1 impedance matching transformer. This eliminates common requirements of using mixtures of 75 ohm and 50 ohm phasing or delay cables for impedance matching. Feedlines to each antenna from the relay unit must be the same cable of the same length and match the antenna impedance. So all of them need only be as long as the longest, to reach from the antennas to the relay unit. While it is best to have feedlines of equal electrical lengths, there is no need to closely phase-match cables; cutting the antenna feedlines made from the same coax to equal physical lengths is sufficient. To ensure lowest SWR, impedance matching automatically changes when any antenna is disabled. By switching between antennas at different heights above ground and/or changing the phase relationship between multiple antennas. The old standard system in stacks was to activate or disable specific antennas in the stack to change pattern. However, with the Pro-Stack system, gain remains higher when all antennas are driven and phase is changed, plus this system allows phase inversion as well as the ability to switch any single antenna out of the array. Signals arrive at your antenna system from different azimuth directions and different elevation angles. Adding a stacking phasing system to a rotational array adds the ability to steer the pattern of the antenna array in two planes, azimuth and elevation, and to move the major lobe and nulls. This is accomplished by switching between three identical antennas that are properly spaced for phasing, as well as changing the phase relationship between the antennas to effect changes in the null positons of their elevation patterns. The greatest advantage of equipping your array with a DX Engineering Pro-Stack is the ability to move debilitating pattern nulls away from signal arrival angles. While gain makes a marginal improvement, moving a 20 to 40 dB null can make a phenomenal change in reception. So, the Pro-Stack can make the difference between a barely readable and a strong signal, thus providing the performance edge needed to work rare DX - and win contests. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Get a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System for your winning antenna array.
( 1 )
$1,101.98
—
$1,205.98
DX Engineering PRO-STACK 3 Control Consoles
DX Engineering PRO-STACK Three Antenna Control Consoles, model DXE-EC-PS3, are custom made twelve-position rotary switch controls for manual operation of PRO-STACK Broadband Three Antenna Phasing Relay Units, models DXE-PS-3B and DXE-PS-3BDIN. DXE-EC-PS3 Control Consoles offer the following features: * Stainless Steel Housing * Non-Skid feet * On-Off toggle switch * Green LED power on indicator * Filter capacitors on each control line * Internal automatic resettable fuse * Includes a 2.1mm power plug for +12 V DC power connection Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DXE-EC-PS3 Control Consoles connect to the PRO-STACK Relay Units with 9-conductor control cable, or with 8-conductor cable plus ground using the coaxial cable shield as the ground return. These consoles were designed for the PS-3B series, but may be used for other applications which require a special BCD controller. See the EC-PS3 manual linked in the "Documentation" tab for detail on connections and the BCD truth table.
Not Yet Reviewed
$205.99
DX Engineering PRO-STACK Broadband Antenna Phasing Systems
DX Engineering PRO-STACK Broadband Antenna Phasing Systems are designed to combine two identical Yagi or log periodic beams, or three quarter-wave vertical antennas, into a phased array for enhanced directional pattern selections and dramatically improved HF operations. There is no need for special coaxial delay lines with the DX Engineering PRO-STACK systems. Just connect your antennas to the system relay unit with equal-length 50-ohm coaxial cable assemblies. The PRO-STACK switch relay units are available with high-quality PTFE-silver plated SO-239, UHF female connectors. The matching PRO-STACK Control Console operates the system with a 1-of-3 source voltage control format at 12-15V DC with a user supplied four conductor control cable to achieve four different antenna phasing selections. PRO-STACK Broadband Antenna Phasing Systems operate across the 160 to 10 meter range. They have two antenna ports that can be used for any application requiring the four basic selections: 1. BIP - Both antenna ports In-Phase 2. BOP - Both antenna ports Out-of-Phase 3. BOTTOM - Antenna port 1 only 4. TOP - Antenna port 2 only. The unpowered default is 1 - Both ports In-Phase. Impedance matching is automatic in the PRO-STACK even when any antenna port is disconnected. Generally, stacked Yagi antennas are separated vertically with greater than one half wavelength free space. Since the DX Engineering PRO-STACK Antenna Phasing Systems are broadband, they may be easily adapted to larger arrays. For example, four stacked Yagis may be combined by creating two sets of PRO-STACKS, with a third DX Engineering PRO-STACK to combine the first two. PRO-STACK systems may also be used to feed quarter-wave resonant vertical antennas for a high-gain, 4-pattern array. This arrangement requires three verticals, with the center #2 passive antenna element directly grounded to the system ground radial system at all times, while elements #1 and #3 are then fed in various phase relationships by the PRO-STACK. Details are in the complete PRO-STACK PS-2B Instruction Manual linked here in "Documentation" tab. The full- color printed manual is included with the system relay unit. PRO-STACK Broadband Antenna Phasing Systems are available as separate Relay Units for operators who have automated BCD switching devices, and as packaged systems with Relay Unit and matching manual Control Console. Features of the DX Engineering PRO-STACK Broadband Antenna Phasing Systems include: * Power handling up to 5 kW * Broadband coverage on 160-10 meters * High impact shielded weatherproof housing * High-RF tolerant, silver-PTFE SO-239 (UHF female) connectors * Proven DX Engineering RF relays for high performance * Safe 12V relay operation * DC-powered control console allows battery or solar emergency operation * MOV surge protection on control lines * External, removable control line connector * RoHS-compliant assembly Dominate the airwaves with DX Engineering PRO-STACK Broadband Antenna Phasing Systems. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$895.98
—
$935.99
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas
Momobeam DUO8 15/20 SF Dual Band HF Yagi Antennas are a single, separately fed dual-band full size antenna designed for the 14MHz (20m) and 21MHz (15m) amateur bands. With independent SO-239 feed lines connectors for each band, it enables simultaneous operation by two transceivers—without the need for expensive diplexers. Perfect for multi-operator contesting, the DUO8 15/20 SF eliminates the need for additional towers. Simply pair it with high-quality bandpass filters and you're ready to go. Enjoy true monoband performance from a single dual-band antenna. Assembly is simple and intuitive. The DUO8 15/20 SF uses a square boom, and all hardware is packaged in clearly labeled bags. Each aluminum tube is also labeled to ensure a quick and hassle-free setup.
Not Yet Reviewed
$3,245.99
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas
Momobeam TRI9 30/17/12 Meter Full-Size Yagi Antennas are the perfect choice for operators who appreciate the unique characteristics of the WARC bands. These antennas offer medium overall dimensions while maintaining full size elements across all three bands, ensuring optimal efficiency and strong on air results. The design features four elements on 24 MHz, three elements on 18 MHz, and two elements on 10 MHz, delivering excellent gain, bandwidth, and pattern control on each band. Engineered for consistent, high quality performance, TRI9 30/17/12 antennas provide a flat SWR curve with values under 1.5:1 across all three WARC bands without requiring additional tuning. Their electrical performance allows operators to break through demanding pileups with confidence, giving the station a significant advantage during DX openings and rare entity activations. Each TRI9 30/17/12 antenna includes an assembly tool and spare parts such as bolts and an aluminum tube, offering convenience and long term serviceability. A high quality 3kW RF choke balun is supplied as standard—a premium component that many manufacturers offer only as an extra-cost option. This balun helps maintain clean RF behavior, reducing unwanted feed line currents and improving overall system performance. Assembly is designed to be simple, fast, and intuitive. The antennas use a square boom structure, and all hardware arrives in individually labeled bags. Every aluminum tube is clearly marked to ensure accurate placement, making the installation process smooth and error free even for first time builders. Requiring a medium to heavy duty rotator, the TRI9 30/17/12 Meter Yagi Antennas combine mechanical strength, refined electrical engineering, and user friendly assembly. They deliver outstanding performance for WARC enthusiasts who want powerful, dependable antennas without excessive footprint or complexity.
Not Yet Reviewed
$3,609.99
Momobeam TRI16-BT 20/15/10 Meter Yagi Antennas
Momobeam TRI16 BT 20/15/10 Meter Yagi Antennas are high performance tri band antenna systems engineered specifically for installation on large towers and demanding station environments. Designed for operators who require exceptional gain, pattern control, and mechanical durability, these antennas deliver powerful, consistent results across the 20, 15, and 10 meter bands. TRI16 BT antennas are truly unique. The generous spacing between the elements around the boom to mast plate allows installation on towers with sides up to 70 inches per side. Built on a 38 foot boom, each antenna features a total of sixteen elements: four elements on 20 meters (reflector, driver, and two directors), five elements on 15 meters (reflector, driver, and three directors), and seven elements on 10 meters (reflector, driver, and five directors). This aggressive element configuration delivers outstanding forward gain and strong rejection performance across all bands. Each TRI16 BT antenna includes an assembly tool and spare hardware such as bolts and an aluminum replacement tube. A high quality 3kW RF choke balun is also included as standard—an important advantage, as many manufacturers offer similar components only as optional extras. This premium balun ensures proper feed line isolation and cleaner RF behavior for high power operation. Assembly is designed to be straightforward and intuitive. The antennas use a square boom structure for strength and reliability, and all hardware is packaged in individually labeled bags. Each aluminum tube is clearly marked for quick identification, ensuring a smooth, error free installation process even on complex large tower projects. TRI16 BT antennas require only a single coaxial cable and a medium to heavy duty rotator to support their robust mechanical build. With their combination of advanced engineering, substantial element count, and tower friendly design, these antennas provide exceptional performance for serious Amateur Radio operators who demand the very best from their tri band Yagi systems.
Not Yet Reviewed
$4,572.99
DX Engineering Skylark Dual-Band Yagi Antennas
DX Engineering Skylark™ Dual-Band Yagi Antennas cover 17 and 12 meters and have no moving parts, support instant band changes, have no UV challenges, and no antenna-related lightning issues! Skylark™ antennas require no tuning and offer an SWR of less than 1.3:1 over the entire width of both bands. DX Engineering's Skylark™ utilizes aluminum and stainless steel construction, operate from a single feed line, and have a 90 mph wind survival rating. At only 38 lbs., Skylark™ antennas are light enough to be easily installed. These antennas are supplied complete with all mounting hardware for a 2 in. mast. Their stainless steel U-bolts and unique boom to mast mounting system make for very easy installation. Check these DX Engineering Skylark™ features: * Gain on 17 meters: 7.95 dBi * Gain on 12 meters: 7.75 dBi * Front to back on 17 meters: 21 dB * Front to back on 12 meters: 24 dB * 16 ft. boom * Wind loading: 6.5 square feet * Longest element is 27 ft., 8 in. * Turning radius is 16 ft. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. These Skylark™ antennas are a perfect match for stacking with any classic tri-bander. Your tri-bander would support 20, 15, and 10 meters, while the Skylark™ adds 17 and 12 meters. They are also a perfect companion for DX Engineering Skyhawk™ Tri-Band Yagi Antennas. Whatever antenna your tower currently supports, one of these DX Engineering Skylark™ Dual-Band Yagis from DX Engineering will be a worthwhile addition to your antenna farm!
Not Yet Reviewed
$1,999.98
Diex Antennas Dual-Band Trap Shortened Rigid Dipoles
DIEX Antennas Dual Band Trap Shortened Rigid Dipoles are shortened dipole antennas for 12m and 17m. Diex aluminum tubing antennas provide excellent performance and are handled with a lighter tower and smaller rotator, offering a very economical alternative to the expense of a Yagi. Crafted with precision in Brazil using quality materials, they are designed to withstand tough environments assuring long-lasting service. They are packed partially assembled, saving valuable time and effort. Typically mounted on a rotating mast, these dual-band HF antennas provide very good directionality depending upon installed height above ground. They feature the flexibility of physical adjustments to set the lowest SWR to a specific frequency. Diex Antennas Dual-Band Rigid Rotatable Dipoles power handling is 1,500W+ PEP, which is further limited if using an antenna tuner. NOTE: Diex Antennas recommends that HF antennas should be mounted on a tower at a minimum height of 33 to 50 ft. (10 - 15 meters) above ground level and must be installed in the clear, away from power lines, trees, buildings or other towers and antennas
Not Yet Reviewed
$315.99