Availability
15 Results Found For "in-line"
REZ Antenna Systems Scout XFORM Antenna Kits
REZ Antenna Systems Scout XFORM Antenna Kits are designed to get you up and running fast. Based on the Scout XF Base, these versatile kits contain the parts you need to set up portable antennas in the field for portable operations. Each kit provides the building blocks to set the XFORM antenna system up in a variety of ways. What type of antenna you can set up with each kit is varied but comes with the parts to set up at least a vertical and a delta loop. The REZ Antenna Systems SXF-41KIT1 includes: the REZ Ranger Pro backpack, the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ Ground Spike, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT2 includes: The REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit. The REZ Antenna Systems SXF-41KIT3 includes: the REZ Scout XF mounting base, the XFORM 4:1 UNUN, the REZ Multi Mount, the REZ common mode feedline choke, two REZ 17-foot Stainless Steel telescopic whips, and the REZ Delta Loop Antenna Wire kit The heart of these REZ antenna kits is the Scout XF mounting base, which is designed to connect your coax to the rest of the XFORM system. Featuring a pair of 3/8x24 studs, a ring for hanging the Scout and coupling nuts, this versatile mounting base allows for your antenna to be oriented in multiple ways. Connection points along the base allow for easy attachment of radials. The REZ XFORM 4:1 UNUN mounts to the top of the Scout XF mounting base and adds a 4:1 transformer to the antenna system. This is useful when setting the antenna up as a delta loop or a Rybakov Vertical. Gaskets on the UNUN allow for sealing against inclement weather. The REZ Multi mounts allow for attaching the Scout XF base to the Ground Spike or a tripod. Providing three 3/8x24 threaded holes on the top, one horizontal, and two at 45-degree angles opposite each other as well as a 3/8x16 and a 1/4x20 for mounting on a REZ Ground Spike or the REZ [Z]Pod Tripod. Comes with a 3/8x24 stud for mounting to the Ground Spike or [Z]Pod Tripod. The REZ Delta Loop Antenna Wire Kits are a 25-foot-long wire that is designed to be paired with a pair of 17-foot stainless steel telescopic whips. Copper clips on each end of the [Z]Kore Kevlar antenna wire provide a solid connection to the telescoping whips, and the wire stores on a convenient wire winder to keep the wire neat and for easy deployment and storage. The REZ [Z]-17SS Stainless steel whips are 17-foot-long telescopic whips that collapse down to 24 5/8in. Weighing in at 14.4 oz, with a power rating of 1000W PEP, these 17-foot whips are resonant on 20-6 meters by themselves or up through 40 meters with the addition of an XFORM UNUN. The REZ CM7 Common Mode feedline chokes provide a reduction in common mode current that travels back down your coax and causes issues for radiating your signal. These quality feedline chokes help keep the RF radiating from the antenna where you want it and not the coax. The REZ Ranger Pro Backpacks provide a convenient way to carry your REZ antenna system and ancillary gear into the field. Depending on the size of your radio and battery, you may be able to carry your entire portable setup in this backpack. This quality pack makes it easy for organization of all of your portable gear with multiple pockets and Molle webbing for additional attachment points to hold your gear.
Not Yet Reviewed
$619.94
—
$759.94
Ciro Mazzoni Loop Antenna Replacement Parts
Ciro Mazzoni Loop Antenna Replacement Parts are stocked for those who need to update or reinstall their Loop Antenna by I3VHF. Parts are all original; exactly the same supplied with each model, MIDI, BABY and STEALTH models, including Actuator motors and Isolator Arms. The updated, current model ATU 2.0 replacement (MZZ-COM1001) is the same as supplied with all three new antennas. So are the Universal AC Power Supply (MZZ-COM1002) and the USB Keyboard (MZZ-COM1003). The Stainless Steel Mast Clamp and hardware (MZZ-COM1005) fit the MIDI or the BABY Loops. The MZZ-BLA1010 aluminum adapter plate is supplied with BABY Loop Tripods, available here as a replacement. Order Loop Antenna by I3VHF Replacement Parts here at DX Engineering.
( 7 )
$105.99
—
$122.99
Chameleon Antenna Mast Top Adapters
Chameleon Antenna Mast Top Adapters are proudly made in the USA of anodized aluminum and features a 3/8-24 threaded center for mounting a wide variety of antennas or accessories. Four 1/4 inch guy line holes are drilled around the perimeter for guying the mast. These universal mast top adapters are compatible with any 1 inch diameter mast.
( 1 )
$99.00
DX Engineering Portable VHF/UHF Antenna Mounts
Designed for rapid deployment in portable operations, the DXE-MOBILEPORT-U is the ideal solution for mounting VHF/UHF or GMRS vertical antennas in the field. Whether you're camping, participating in Field Day, supporting EmComm activities, or setting up a temporary station, this mounting plate simplifies antenna setup in challenging environments. The center hole is sized to fit over collapsible masts like the DXE Nomad fiberglass mast, providing a stable and secure base. Four outer holes serve dual purposes: they can anchor guy lines for mast stabilization and support soldered wires to create a ground plane—if your antenna requires one. However, for best performance and simplicity, a no-ground-plane-required antenna is recommended. Compact, lightweight, and versatile, the DX Engineering MOBILEPORT-U Portable VHF/UHF Antenna Mounts are a must-have for any portable antenna deployment kit. Important Note: This mounting plate is intended for use with fiberglass masts only. Carbon fiber masts are not recommended, as they may interfere with RF signals and cause SWR issues due to their conductive properties.
Not Yet Reviewed
$29.99
SOTAbeams Antenna Lifting Kite
The SOTAkite is specifically selected to be used as an integral piece of a kite-borne antenna system. They are easy to fly and stable making them the perfect aerial-platform. Large enough to lift antennas with ease but small enough to remain easy to control, even in high winds. Available from DX Engineering, the Antenna Lifting Kite with Plus Pack includes SOTAkite, drogue tail, 200 ft. 55 kg. braided Dacron line on reel, instructions, kite bag, 5 meter Shock Cord, two versatile top insulators and two 470K-ohm static bleed resistors. Operating wind speeds of the SOTAkite are 5 to 18 mph, which is a good wide range for maximum utility. The nylon flying surface of the kite is 168 x 100 cm (55 x 34 in.) and is considered by the manufacturer to be suitable for users ages 14 and up. Safety First: In many localities there are restrictions on kite flying. Check your local and national regulations first. Kite antennas must never be used if there is any risk of lightning. They should never be flown within the proximity of the antenna wire length to electrical power lines, any structures, or public roadways. Click "More Detail" for a link to the manufacturer's kite antenna flying guide.
( 2 )
$89.99
Chameleon Antenna CHA NVIS Multi Band Portable Wire Antennas
Chameleon Antenna CHA NVIS Multi Band Portable Wire Antennas are an advanced evolution of the world's most widely used Near Vertical Incidence Skywave (NVIS) antenna—the U.S. Army AS 2259/GR. Redesigned with modern materials and engineering, it delivers greater portability, wider frequency coverage, and significantly reduced weight while maintaining the rugged reliability required for demanding field conditions. Originally engineered for the jungles of Vietnam, this antenna platform is now optimized for today's most challenging EMCOMM, disaster response, and field deployment environments. Purpose-built for NVIS propagation, the CHA NVIS enables reliable short to medium range HF communication when conventional line of sight or long-distance skip paths are ineffective. Its design makes it ideal for emergency communication operators who must maintain contact with agencies and relief teams located just outside an affected disaster zone. Operating from 1.8–54.0MHz, including the 160–6-meter Amateur Radio Service bands, the CHA NVIS provides broad frequency capability without adjustment when paired with a suitable antenna tuner. The system requires only a single center support approximately 15 feet high and is self guying, enabling rapid deployment in the field.
Not Yet Reviewed
$315.00
Chameleon Antenna EMCOMM-III-B HF Base Antenna
Chameleon Antenna EMCOMM-III-B HF Base Antenna is an effective multi-band High Frequency (HF) antenna specially designed for short to long range base station HF communications. Due to configuration and installation flexibility and low-visibility design, it is ideal for home use even in developments with a Home Owners Association (HOA) and Covenants, Conditions, and Restrictions (CCRs). It is also highly suitable for military, government agencies, non-governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and shortwave listening. The EMCOMM III Base antenna is configurable to facilitate both long distance (DX) and Near-Vertical Incident Sky wave (NVIS) communication and using an automatic antenna tuner or coupler with memory settings will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. SWR: Subject to frequency and configuration, but typically less than 2.7:1. An antenna tuner or coupler may be required depending upon frequency and configuration. The EMCOMM III Base antenna can be installed by the operator in less than 30 minutes. It should be installed as high and straight as possible, but almost any available supports, such as an existing antenna tower, trees, a flag pole, the eaves of a house, or a non-conductive fence can be used with satisfactory results. The EMCOMM III Base antenna is comprised of a matching transformer and a 130 foot antenna wire on a line winder - making an effective HF base station antenna system for permanent installation as a primary or backup HF base station antenna. Specifications: * Frequency: 80M - 10M * Power: 200 watt SSB or 100W CW/Digital * Length: 130 ft. Copper Clad Kevlar® PTFE (-70 degrees C to 150 degrees C) wire * Weight: 2.2 Lb. The antenna system consists of: * 1 X CHA EMCOMM III matching box * 1 X 130 ft. Copper Clad Kevlar® Wire
( 14 )
$195.00
DX Engineering HF Portable TW Antennas and Accessories
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer and seller of TW Antennas! DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this line formerly known as Transworld. DX Engineering HF Portable TW Antennas and Accessories feature complete portable antenna packages and all of the individual components to build a custom stealthy system. Will you use these compact HF antennas as portables, fixed antennas, or both? Choose your own path to stealthy operations and to join in the fun of portable HF! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black finish that is excellent on fixed antennas in HOAs or where "CC & R" antenna restrictions preclude the installation of towers and easily visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the optional 41 in. long permanent mounting post, DXE-TW-PMP, and operate! Note: Although a permanently-installed mounting pier (DXE-TW-PMP) is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. For portable use, the lightweight foldable Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Quadrastand's gray fiberglass legs will give decades of rugged, dependable service. And since they're fiberglass, there's no chance of corrosion from contact with earth or sand. Think about equipping for your special operating event plans like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air) for backpacking and general camping with HF! A great Carry Case, DXE-TW-DXBAG, is available to make traveling with these antennas in your car or RV a snap. DX Engineering HF Portable TW Antennas and Accessories are available as mono-band or multi-band systems. Covering all five bands from 20 through 10 meters, DXE-TW-2010 Multi-Band Remote Switching Center Sections include a control console and cable and can be band-switched remotely in the shack and automatically by some transceivers. DXE-TW-2010L Multi-Band antennas can be band-switched manually. Plus, it's easy to change to the 80, 40 and 30 meter operations with DXE-TW-8080, DXE-TW-4040 or the DXE-TW-3030. Swap out each Band Box Center Post to change to operations on these different bands in a very simple manner. Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antennas available. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering HF Portable TW Antennas and Accessories are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 20 )
$91.99
—
$595.99
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna
CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna is specially designed for short to long range portable and man-pack HF communications. The EMCOMM III Portable antenna is ideal for hiking, backpacking, and both tent and Recreational Vehicle (RV) camping. It is also highly suitable for military, government agencies, non- governmental organizations (NGOs), Military Affiliate Radio System (MARS), Civil Air Patrol (CAP), Amateur Radio Emergency Service (ARES) / Radio Amateur Civil Emergency Service (RACES), Salvation Army Team Emergency Radio Network (SATERN), and amateur radio operators (hams) involved in field communication and disaster preparedness. The EMCOMM III Portable antenna is configurable to facilitate Near-Vertical Incident Sky wave (NVIS) communication and will support most Automatic Link Establishment (ALE), frequency-hopping, and spread- spectrum modes and operations. An antenna tuner or coupler may be required for in some instances. The EMCOMM III Portable antenna can be deployed by the operator in the field in less than 15 minutes, using almost any available support, with no masts or guying required. The EMCOMM III-P Portable antenna is comprised of a matching transformer, a 73 foot antenna wire on a line winder, and a 25 foot counterpoise - making a highly portable and effective HF antenna system. CHAMELEON ANTENNA EMCOMM-III-P Portable HF Antenna Specifications: - Frequency: 160M - 6M (dependent upon tuner) - Power: 100W SSB or 50W CW - Length: 73' + 25" Copper Clad KEVLAR PTFE (Teflon) (-70°C to 150°C) wire - Weight: 1.5 Lb. The EMCOMM-III-P Portable HF Antenna system consists of: 1 X CHA EMCOMM III matching box 1 X 73' Copper Clad KEVLAR Wire (Radiator) 1 X 25' Copper Clad KEVLAR Wire (Counterpoise)
( 12 )
$190.00
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper
Chameleon Antenna Lightweight 4010 End Fed Halfwave Sloper is a four-band HF antenna for use on the 40-10 meter Amateur Radio bands without the need for a tuner and 30, 17, and 12 meters is possible with the help of a tuner. Near-Vertical Incident Skywave (NVIS) communication is possible, but dependent on the configuration of the antenna when installed. The CHA-LEFS-4010 is designed for the trail and its minimalistic design and lightweight components make this antenna ideal for backpackers, hikers, bikers, campers, and survival communication. The built-in line winder with its integral high-efficiency 49:1 impedance matching transformer and ultra-thin 20 AWG PTFE antenna wire enables extremely portable four-band operation without the extra bulk of an antenna tuner. With the addition of user supplied antenna wires that have been cut to length for the desired band of operation, two insulators and support rope, this CHA-LEFS-4010 antenna can be converted to a standard or inverted V dipole antenna. Elevate your portable operations with the exceptional performance and convenience of the CHA-LEFS-4010. This antenna system is available in 2 configurations consisting of the following components: CHA-LEFS-4010 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch CHA-LEFS4010-316 - 1 X CHA LEFS 65ft. of 20AWG Tinned Copper PTFE wire - 1 X OD Carrying Pouch - 1 X 25ft. RG-316 Coaxial Cable with RFI Choke
( 3 )
$175.00
—
$250.00
DX Engineering TW Antenna 40 Meter Solo Explorer Packages
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer of TW Antennas!* DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this antenna line formerly known as Transworld. DX Engineering TW Antenna 40 Meter Solo Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, the band box and an antenna stand. You supply the coax and your own powered transceiver. It's a great antenna for portable Low-Band QRP! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black powdercoat finish that is excellent for antenna use in HOAs. Use them where "CC & R" antenna restrictions preclude the installation of towers or easily-visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the antenna stand and operate! No radials are needed with these 40-meter vertical dipoles! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is OPTIONALLY available to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antenna available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 40 Meter Solo Explorer Packages are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
( 2 )
$748.96
Chameleon Antenna Lightweight Portable Off-Center Fed Dipoles
Chameleon Antenna Lightweight Portable Off-Center Fed 40 Meter Dipoles are intended for extreme portable use, such as Parks On the Air (POTA), Summits On the Air (SOTA), and other outdoor radio adventures where an effective, but lightweight and backpackable antenna is required. The CHA-OCF-40 antenna works without a tuner on the 40, 20, 10, and 6 meter Amateur Radio Bands and with a tuner on 60, 30, 17, 15, and 12 meters - enabling operation on the most popular POTA and SOTA bands. The CHA-OCF-40 includes a lightweight matching transformer, a total of 66 feet of light gauge antenna wire in two segments on a line winder and a small carrying pouch - Simply add coaxial cable, an RFI choke, a lightweight telescoping mast, or a convenient tree and you're on the air. Looking for an effective lightweight antenna for any portable operation? Look no further than the Chameleon Antenna CHA-OCF-40 Lightweight Portable Off-Center Fed Dipole. Includes: • 1x Matching Transformer • 1x 44.5ft. Antenna Wire w/ Isolation Ring • 1x 22.1ft. Antenna Wire w/ Isolation Ring • 1x Small Wire Winder • 1x OD Green Carrying Pouch ________________________________________ Additional Features and Specifications: • Frequency Range: - No Tuner - 40/20/10/6 meters - Tuner Required - 60/30/17/15/12 meters • Power Handling: 50W SSB, 25W CW and all other modes. • Total Length: Approximately 66 ft. • SWR: Typically, less than 2.1 on covered bands. • Weight: Approximately 1/2 lbs. (less carry pouch and optional coaxial cable). • Setup Time: One operator, approximately 15 minutes.
( 3 )
$99.00
DX Engineering TW Antenna 30 Meter Solo Explorer Packages
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer of TW Antennas!* DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this antenna line formerly known as Transworld. DX Engineering TW Antenna 30 Meter Solo Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, the band box and an antenna stand. You supply the coax and your own powered transceiver. It's a great antenna for portable Low-Band QRP! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black powdercoat finish that is excellent for antenna use in HOAs. Use them where "CC & R" antenna restrictions preclude the installation of towers or easily-visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the antenna stand and operate! No radials are needed with these 30-meter vertical dipoles! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). With robust 30 meter digital modes, DX contacts will be oh-so easy! For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is OPTIONALLY available to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antenna available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 30 Meter Solo Explorer Packages are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$748.96
DX Engineering TW Antenna 80 Meter Solo Explorer Packages
Preserving and building upon the legacy of this premier portable HF antenna line, DX Engineering is now the manufacturer of TW Antennas!* DX Engineering's acquisition of the products and designs of these unique HF portable and stealthy antennas brings easy access and simplified ordering to this antenna line formerly known as Transworld. DX Engineering TW Antenna 80 Meter Solo Explorer Packages include everything you need to go portable! The package is comprised of the basic antenna structure, an expanded band box to contain the large 80 meter matching coils and an antenna stand. You supply the coax and your own powered transceiver. It's a great antenna for portable Low-Band QRP! Naturally stealthy, these compact HF vertical-dipole TW antennas feature a black powder-coat finish that is excellent for antenna use in HOAs. Use them where "CC & R" antenna restrictions preclude the installation of towers or easily-visible HF antennas. Simply unfold the DXE-TW-BAS-BLK Top and Bottom Sections, add your Band Box Center Post section, and place the antenna on the antenna stand and operate! No radials are needed with these 80-meter vertical dipoles! Ideal for portable use, the lightweight Quadrastand, DXE-TW-AQ, lets you set up your DX Engineering HF Portable TW Antenna wherever you happen to be. Think about special operating events like Scouts Jamboree On-The-Air (JOTA), Field Day or even SOTA (Summits On-The-Air). For general camping and travel, a convenient and durable carrying case, DXE-TW-DXBAG, is OPTIONALLY available to make transporting these antennas in your car or RV a snap! Typical installation for TW Antennas is a compact 8.25 ft. tall and only 5 ft. wide. Make your choice; portable, fixed or both, then equip yourself with the best compact vertical-dipole antenna available. Note: Although a permanently-installed mount is available, DX Engineering TW Antenna band boxes are not waterproof. Do not leave your TW Antenna exposed to the elements. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering TW Antenna 80 Meter Solo Explorer Packages are here to help you enjoy working stealthy HF at home or… anywhere! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$898.96
Chameleon Antenna CHA Square SO-239 Blank Adapters
Chameleon Antenna CHA Square SO-239 Blank Adapters are a compact, heavy duty inline adapter featuring dual SO 239 (UHF female) connectors and a 3/8-24in. bottom male stud. This design allows seamless connection between SO 239 equipped antennas or accessories while mounting directly to any 3/8-24in. female antenna support, such as tripods, masts, magnetic mounts, or vehicle brackets. Precision machined from high grade materials, the adapter delivers excellent RF conductivity, rugged mechanical strength, and long term reliability across HF, VHF, and UHF bands. Ideal for portable, mobile, base, and test configurations requiring fast, modular equipment integration.
Not Yet Reviewed
$132.00