Availability
HF Vertical Antennas
Butternut HF9V 9-Band Vertical Antennas
Butternut HF9V Vertical Antennas work nine popular bands--80 through 6 meters--with an extremely efficient vertical radiator that's only 26 ft. tall! The HF9V antennas are easy to erect and tune antennas that will last you for many years. An internationally acclaimed antenna design, Butternut HF9V antennas require a complete ground radial system. The antenna comes with a 1 1/8 in. base insulator and a 1 1/4 in. O.D. x 2 ft. mounting tube for direct placement into the earth. The preferred, "easiest-to-tune", high-performance installation is the ground mounted HF9V, which requires a bare minimum of 12 evenly spread, straight radial wires. Many more radials are better, with double the number of evenly spread radials achieving nearly double the efficiency and signal performance, an effect that tops out at about 60 ground radials. Each radial wire stapled onto the ground or run an inch or so below the soil surface, may be any length from 20 to 45 ft. Radial wires need to be up to 50 percent longer over sandy and rocky soil to maintain efficiency. Want to hear and work the stations that other operators seem to be working easily? Enjoy advanced operations on the HF bands with a high performance vertical antenna installation. Have more fun DXing with great signals on your Butternut HF9V 9-Band Vertical Antenna.
( 23 )
$1,062.99
DMV Rope Guying Earth Anchors
DMV Rope Guying Earth Anchors are designed for use on ropes to build a custom guying system for your vertical antenna. They are manufactured from high-quality steel and have a protective finish applied for long-lasting durability. DMV Rope Guying Earth Anchors feature a specially designed twisted base to allow for easy installation in the ground. Specifications: - Shaft Diameter: 0.5 in. - Loop Height: 2.24 in. (loop tip to outside top of the loop) - Anchor Length: 15.00 in. - Anchor Width: 3.0 in.
Not Yet Reviewed
$11.99
—
$47.96
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas
DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas, model DXE-7580FS-VA-3, are specifically designed for the 75/80 meter band. These DX Engineering 68 ft. vertical antennas are serious, FULL SIZE, full performance vertical antennas that will easily slip into any Amateur Radio station's arsenal, while delivering specs that would satisfy most commercial and military users. They are ultra-rugged, quarter-wave verticals that allow you to achieve the strongest possible presence at your power level and be competitive. Every design detail of the DXE-7580FS-VA-3 Heavy Duty Plus Verticals provide for a very stout 80 meter antenna that can stay up with no guying necessary and no worry. A massive 4 in. O.D. thick-wall 6061 aluminum tubing base and an extra-large insulating channel are combined with a patented* heavy duty stainless steel pivoting fixture that is second to none. Engineered for ease of assembly and adjustments, with corrosion-resistant aluminum tubing, stainless steel mounting brackets, and stainless steel hardware, these are very durable and attractive self-supporting antennas. If an extreme wind storm is predicted, one operator can easily lower and raise these antennas safely, due to the simplicity of the included Heavy Duty Pivoting Fixture and optional DXE-VRW-1 Manual Winch. DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas offer full band coverage, with a 2:1 SWR bandwidth of up to 593 kHz, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer. DX Engineering 80 Meter Full Size Quarter Wave Heavy Duty Plus Vertical Antennas feature: -- Self-supporting – will withstand steady-state winds in excess of 112 MPH without guying (guying required under extreme wind speed conditions) -- 5 kW SSB and CW rated—unparalleled reliability -- Ultra-rugged construction starts with 4 in. O.D. aircraft-grade heavy wall tubing -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings--high strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented stainless steel Pivoting Fixture, *U.S. Patent Number 8,130,168 -- High power handling and high strength, UV protected EXTREN® insulators -- No rust--100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. Note: For additional information, please look at the files under the "Documentation" tab. Designed to the highest of standards, DX Engineering 80 Meter Self Supporting Heavy Duty Plus Vertical Antennas are simply the best 80 meter vertical antenna available today.
( 3 )
$2,959.97
Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages
Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages are trapped-vertical antennas that provide an omni-directional pattern. 6BTVs were designed as self-supporting verticals to provide efficient operation in the 10, 15, 20, 30, 40, and 75 or 80 meter bands. These antennas perform well in restricted space areas. For peak performance, a field of radial wires should be used. Hustler 6-BTVs provide for automatic selection of bands through the use of optimum-Q traps which are individually and precisely tuned and internally sealed at the factory. These traps are parallel-tuned circuits, which provide very effective isolation between the vertical sections, permitting precise multi-band operation. Broadband operation, with low SWR over the entire ham band, (limited on 80 and 75 meters), is possible in a proper installation. These antennas were designed to provide optimum performance from both an electrical and mechanical standpoint. Mechanically, these antennas boast a heavy-duty base and heavy-duty aluminum tubing throughout. The mechanical assembly is accomplished with all stainless steel hardware. Performance provided by the Hustler 6BTVs is better than any other antenna of this type. Broad-banding is such that one measurement and setting permits both phone and CW operation. The antenna provides nominal 52-ohm base impedance when installed and tuned according to the instructions. The radiation efficiency is equal to, or greater than, other trap verticals. An optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance. Want a multi-band vertical antenna with a proven track record? Order Hustler 6BTV 6-Band HF Vertical Antenna and DXE® Installation Guide Packages from DX Engineering!
( 44 )
$499.98
DX Engineering Direct Coax Feed Add-On Kits
DX Engineering Direct Coax Feed Add-On Kits are designed for the Hustler BTV Series of antennas. They allow for a direct connection with a coaxial cable PL-259 (UHF male) connector. Manufactured from heavy-duty stainless steel, these add-on kits allow for a convenient connection from your coaxial cable feed line directly to the base of the Hustler BTV series vertical antennas by adding a mounted SO-239 (UHF female). They may be positioned in any one of three different directions to accommodate a straight-in or sideways connection from your feed line. If you are looking for a professional and reliable installation, then order a low power or high power (low loss) coaxial jumper cable for connecting your radial plate with a bulkhead connector. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Direct Coax Feed Add-On Kits include a laser-cut stainless steel bracket, high quality SO-239 with PTFE insulation, and stainless steel hardware. Order one for your BTV vertical!
( 79 )
$42.99
Butternut HF6V 6-Band Vertical Antennas
Butternut HF6V Vertical Antennas work six bands--80, 40, 30, 20, 15, and 10 meters--with an extremely efficient vertical radiator that's only 26 ft. tall! The HF6V antennas are easy to erect and tune antennas that will last you for many years. The antenna comes with a 1 1/8 in. base insulator and a 1 1/4 in. O.D. x 2 ft. mounting tube for direct placement into the earth or mounting into a standard steel TV mast. An internationally acclaimed antenna design, Butternut HF6V antennas require a complete ground radial system. The antenna comes with a 1 1/8 in. base insulator and a 1 1/4 in. O.D. x 2 ft. mounting tube for direct placement into the earth. Accessory kits for 17, 12 and 6 meters are available. The preferred, "easiest-to-tune", high-performance installation is the ground mounted HF6V, which requires a bare minimum of 12 evenly spread, straight radial wires. Many more radials are better, with double the number (24) of evenly spread radials achieving nearly double the efficiency and signal performance, an effect that tops out at about 60 ground radials. Each radial wire stapled onto the ground or run an inch or so below the soil surface, may be any length from 20 to 45 ft. Radial wires need to be up to 50 percent longer over sandy and rocky soil to maintain efficiency. Want to hear and work the stations that other operators seem to be working easily? Enjoy advanced operations on the HF bands with a high performance vertical antenna installation. Have more fun DXing with great signals on your Butternut HF6V Vertical Antenna.
( 8 )
$929.99
Hustler 4BTV 4-Band HF Vertical Antenna and DXE® Installation Guide Packages
Hustler 4BTV 4-band HF vertical antenna and DXE® installation guide packages are 4-band, trap vertical antennas that provide an omni-directional pattern. The 4BTVs are designed as self-supporting verticals to give optimum operation in the 10, 15, 20, and 40 meter bands. They can also be upgraded to operate on 75 or 80 meters. These antennas perform well in restricted space areas. For optimal performance, radial wires should be used. The Hustler 4-BTVs provide an electrical selection of bands through the use of optimum Q traps, which are individually and precisely tuned and internally sealed at the factory. The traps are parallel-tuned circuits, which provide efficient isolation between the vertical sections, permitting multi-band operation. Broadband operation, with low SWR over the entire ham band, is possible in a proper installation. The antennas are designed to provide for optimum performance from both an electrical and a mechanical standpoint. Mechanically, these antennas boast a heavy duty base and heavy duty aluminum tubing. The mechanical assembly is accomplished with all stainless steel hardware. The performance provided by the Hustler 4BTVs is better than that of any other antenna of this type. The broadbanding is such that one measurement and setting permit both phone and CW operation. The antennas provide a nominal 52 ohm base impedance when installed and tuned. The radiation efficiency is equivalent to, or greater than, other trap verticals. The optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance.
( 21 )
$369.98
DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas
DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas, model DXE-7580FS-VA-2, are high performance vertical antennas specifically designed for the 75/80 meter band. These DX Engineering 70.5 ft. vertical antennas allow you to achieve the strongest possible presence at your power level and be competitive. These are FULL SIZE, quarter-wave vertical antennas that deliver fantastic specs and the highest possible performance at a price that can easily be justified. Every design detail of the DXE-7580FS-VA-2 Heavy Duty Verticals provide for a very rugged 80 meter antenna that can stay up with no guying necessary and no worry. A 3 in. O.D. thick-wall 6061 aluminum tubing base and an extra-large insulating channel are combined with a patented* heavy duty stainless steel pivoting fixture that is second to none. Engineered for ease of assembly and adjustments, with corrosion-resistant aluminum tubing, stainless steel mounting brackets, and stainless steel hardware, these are very durable and attractive self-supporting antennas. If an extreme wind storm is predicted, one operator can easily lower and raise these antennas safely, due to the simplicity of the included Heavy Duty Pivoting Fixture and optional DXE-VRW-1 Manual Winch. DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas offer full band coverage, with a 2:1 SWR bandwidth of up to 557 kHz, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer. DX Engineering 80 Meter Full Size Quarter Wave Heavy Duty Vertical Antennas feature: -- Self-supporting – will withstand steady-state winds in excess of 92 MPH without guying (guying required under extreme wind speed conditions) -- 5 kW SSB and CW rated—unparalleled reliability -- Ultra-rugged construction starts with 3 in. O.D. aircraft-grade heavy wall tubing -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings--high strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down-- Unique fold-over antenna mount features DX Engineering's patented stainless steel Pivoting Fixture, *U.S. Patent Number 8,130,168 -- High power handling and high strength, UV protected EXTREN® insulators -- No rust--100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna This antenna system requires the installation of a heavy duty mounting pipe set in concrete. Specifically, 3 in. OD high strength galvanized steel tubing with 0.250 in. minimum wall thickness and 7 ft. (84 in.) minimum length, which is available from DX Engineering; part number DXE-VGMT-3CG. A customer supplied 2-1/2 in. Schedule 80 pipe that has an outside diameter of 2.875 in. is also suitable. About 36 in. of the mounting pipe should extend above the concrete. Depth of the mounting hole and amount of concrete is dependent on local soil type, condition and antenna guying. Note: For additional information, please look at the files under the "Documentation" tab. Designed to the highest of standards, DX Engineering 80 Meter Self Supporting Heavy Duty Vertical Antennas are very affordable, and could very well be the finest 80 meter antenna you will ever own.
( 9 )
$1,534.98
DX Engineering Guy Rings
DX Engineering Guy Rings advance the art of stabilizing vertical rigid telescopic tubing. These newly engineered and incredibly strong Guy Rings are intended for rope guying DX Engineering, Hustler, and all brands of aluminum tubing vertical antennas, as well as the DX Engineering Telescoping Fiberglass and Aluminum Tubing Kits. Unlike the other guys' rings, DX Engineering Guy Rings have smoothed holes with no sharp edges, protecting your directly threaded ropes. Six 5/16 in. diameter attachment holes allow guy ropes to be properly spaced for three or four way guying systems. DX Engineering Guy Rings are made from the super strong, black UV resistant, glass-reinforced poly-resin material that was introduced with DX Engineering's Universal Wire Antenna Kits EZ-BUILD™ UWA Center-T and End Insulators. They are virtually impervious to extreme outdoor conditions and mechanical stress. If you have a DX Engineering wire antenna or UWA Kit, you will know that these Guy Rings are made to last and will set a new standard in rope guying attachments. With their 1/2 in. thick center hole shoulder, these Guy Rings simply slide over their respective tubing size and seat firmly against the top of the larger tubing section below. Three kits with eight sizes provide rope guying for a myriad of vertical tubing installations: - DXE-GR-2P has two guy rings that fit onto the trap tubing of the Hustler BTV Series Vertical Antennas - DXE-GR-4P has four larger guy rings for Heavy Duty Telescoping Fiberglass sets or aluminum tubing - DXE-GR-5P is the original set with sizes for Standard Telescoping Fiberglass sets or various sized aluminum tubing DX Engineering Guy Rings are so handy and inexpensive that you can have a set on hand, ready for your next antenna project. Order yours today!
( 87 )
$5.29
—
$10.29
DX Engineering Ruggedized BTV Reinforced Lower Tube
Build or refurbish any Hustler BTV antenna to be stronger with a DX Engineering Ruggedized BTV Reinforced Lower Tube. Almost any time we hear of a Hustler BTV Series antenna being damaged by wind, it's the lower tube that gets bent. A BTV is a very tough antenna! But like any antenna, if the wind hits it just right, they can still be damaged. That's where our DX Engineering Ruggedized BTV Reinforced Lower Tube comes in. Our DXE-RLT double-wall aluminum tube is stronger than the original single-wall tube and it works on all BTV Series antennas, old and new. It is 72 in. overall so it is direct replacement; it takes the place of the original Hustler BTV antenna 72 in. lower tube (HSR-4087-1). Once the DXE-RLT reinforced tube is installed, your BTV antenna will be much stronger! Perfect for a new or old BTV antenna, a stronger lower antenna also offers protection against accidents and animal damage. If you're in an area with potentially high-winds, don't allow your BTV to suffer lower-tube wind damage. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Replace any BTV antenna lower tube with a DX Engineering Ruggedized BTV Reinforced Lower Tube!
( 36 )
$65.99
DX Engineering MBVE-5A/AE Series SAF-T-TILT™ Vertical Antenna Components
DX Engineering MBVE-5A and MBVE-5AE Vertical Antenna Components are the specialized parts for these SAF-T-TILT™ antenna systems. Top tubing sets include hardware are used on both standard and extended base versions. Standard and extended base tubing and insulators use separate hardware sets included in antenna packages or sold separately. These components are original parts, which are also available here as replacements. These are genuine DX Engineering SAF-T-TILT™ Vertical Antenna Components.
( 7 )
$101.99
—
$499.99
Hustler 5BTV 5-Band HF Vertical Antenna and DXE® Installation Guide Packages
Hustler 5BTV 5-Band HF Vertical Antenna and DXE® Installation Guide Packages are trapped-vertical antennas that provide an omni-directional pattern. 5BTVs were designed as self-supporting verticals to provide efficient operation in the 10, 15, 20, 40, and 75 or 80 meter bands. These antennas perform well in restricted space areas. For peak performance, a field of radial wires should be used. Hustler 5-BTVs provide for automatic selection of bands through the use of optimum-Q traps which are individually and precisely tuned and internally sealed at the factory. These traps are parallel-tuned circuits, which provide very effective isolation between the vertical sections, permitting precise multi-band operation. Broadband operation, with low SWR over the entire ham band, (limited on 80 and 75 meters), is possible in a proper installation. These antennas were designed to provide optimum performance from both an electrical and mechanical standpoint. Mechanically, these antennas boast a heavy-duty base and heavy-duty aluminum tubing throughout. The mechanical assembly is accomplished with all stainless steel hardware. Performance provided by the Hustler 5BTVs is better than any other antenna of this type. Broad-banding is such that one measurement and setting permits both phone and CW operation. The antenna provides nominal 52-ohm base impedance when installed and tuned according to the instructions. The radiation efficiency is equal to, or greater than, other trap verticals. An optional DX Engineering Tilt Base allows the antennas to be easily brought down during non-operating times or for tuning and maintenance. Want a vertical antenna with a proven track record? Order Hustler 5BTV 5-Band HF Vertical Antenna and DXE® Installation Guide Packages from DX Engineering!
( 22 )
$459.98
Butternut 160 Meter Add-On Kits
Butternut 160 Meter Add-On Kit BUT-TBR-160X is designed specifically for the Butternut HF9V, HF6V and HF2V HF Vertical models. It is a parallel tuned circuit that consists of a coil and four high voltage RF capacitors with custom mounting plates, brackets and clamps. This assembly is installed at the base of the BUTTERNUT® HF Vertical antennas to achieve operation on 160 meters. This new design by DX Engineering incorporates four larger capacitors mounted between two aluminum plates. These new capacitor plates act as heat sinks, to reduce frequency drift when the components heat up under RF power and environmental conditions. Recommended maximum 160M power is 1,000W PEP SSB, 500W CW, 150W Digital (FT8, FT4, RTTY, etc). IMPORTANT NOTES • Your Butternut vertical antenna must be properly tuned on all bands PRIOR to adding this 160 meter kit. A very good radial system is a requirement for reasonable performance on all bands, but especially on the 160 meter band. Due to the effect of the installed 160 meter kit, the other bands will need to be retuned and the original shunt coil will require significant adjustment. • SWR bandwidth on 160 meters is very narrow. When tuning the antenna with an analyzer connected to the antenna matching section coax, choose the EXACT frequency you desire. DO NOT use any antenna tuner to operate on an off-resonance frequency above 2:1 SWR. Use of an antenna tuner is not possible because this is a very high-Q antenna inductor and capacitor combination that will not tolerate overheating. • Prolonged tune-up at maximum power levels must be avoided. Exceeding these levels may cause damage to the antenna, amplifier or transceiver. The TBR-160X functions as an inductive reactance in series with the antenna feedpoint, loading the antenna structure to resonate in the 160 meter band. On the higher bands the TBR-160X produces decreasing values of capacitive reactance, raising the resonant frequency (by 300-400 kHz) on 80 & 40 meters. Above 7 MHz this detuning is negligible and the antenna can be adjusted on all bands to compensate, as needed. In general, the only compromise that one must accept for the sake of 160 meter operation is reduced SWR bandwidth on 80 meters and to a lesser extent, on 40 meters with the HF2V/6V/9V. The TBR-160X SWR bandwidth of 2:1 or less on 160 meters will depend to a large extent on the efficiency of the ground system used with the antenna; 10 kHz is a typical figure with a fair-to-good ground system and a relatively short antenna such as the HF6V/9V. With the longer HF2V, especially if top loading "umbrella" wires are used, SWR bandwidths of 15 to 35 kHz between 2:1 points are possible. Even if greater bandwidths are possible with poorer, higher loss ground systems, performance would suffer. The best possible ground systems should always be used with electrically short loaded antennas. Since the Butternut verticals are very short antennas for 160 meters, full-size antenna performance should not be expected. A critical component of this type of antenna system is a very good radial system; 30 to 60 or more radials of 45 to 65 feet each is a requirement. Even at best the bandwidth will be very narrow so when tuning for 160 meters, you will have to determine which frequency in the band you want to use.
( 1 )
$320.99
COMTEK 40VA 40 Meter Vertical Antennas
COMTEK 40VA Vertical Antennas are rugged, yet economical quarter wave antennas designed primarily to be used in sets with phased vertical array systems. For instance, DX Engineering DVA Dual Vertical Array systems and four square arrays from COMTEK and DX Engineering or any other four-square array controllers. Designed by the people who know all about phasing, these antennas provide precise control of all parameters. Constructed from 6063-T832 (drawn, not extruded) aircraft-spec aluminum tubing, COMTEK 40VA antennas taper from a huge 2 in. O.D. base section to 1-3/8 in. O.D. at the top. While they're built to withstand the most rugged environmental conditions, light guying is always recommended for phased systems to keep the spacing precise and minimize swaying. Hardware used is of the highest quality. High-strength, UV-resistant EXTREN insulators that won't crack, peel, splinter, or fail will ensure you of years of long-lasting, reliable performance under adverse conditions. Mounting brackets are laser-cut by the latest state-of-the-art manufacturing equipment. Stainless steel hardware is used throughout and the antennas come complete with V-saddle clamps for installation to your ground-mounted pipe. A 2 in. O.D. is recommended but the clamps will accept any O.D. from 1 in. to 2 in. Whether you want a quality ground mounted 40 meter vertical as a TX antenna, or are building your dream phased array, These COMTEK 40VA Vertical Antennas from DX Engineering are a great solution!
( 5 )
$325.99
—
$1,303.96
Hustler Antenna Replacement Parts
Hustler Antenna Replacement Parts allow you to keep your Hustler vertical performing at its peak. These Hustler antennas have been on the market for decades. Literally tens of thousands have been put in service around the world. Whether for routine maintenance or repair due to unfortunate damage, Hustler offers the replacement antenna parts that you need. DX Engineering stocks many Hustler Antenna Replacement Parts for your convenience. At each part, click "More Details" for specific application information.
( 106 )
$7.99
—
$98.99
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas
DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas, model DXE-7580FS-VA-1, are high performance 68 ft. antennas that are tunable to operate over segments of the entire 75/80 meter band with an SWR of 1.5:1 or less! These antennas are a breakthrough in full size, quarter wave verticals that offer full performance, but don't cost an arm and a leg. Plus, if your neighbors are the slightest bit touchy, these are the antennas for you. Their slim lines can hide in even a small stand of tall trees. Some have even painted these antennas the color that matches the bark of their surrounding trees! Designed with 6063 corrosion-resistant aluminum tubing and stainless steel hardware, these 80 meter vertical antennas are very durable and attractive. Because of their full size height and tubing size, rope guying is required on these antennas, typically at two levels. They include the DX Engineering standard stainless steel Tilt Base to allow you to walk the antenna up or down with only a few helpers on the rope guys. These inexpensive 80 meter verticals are ideal for phased arrays! DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas have a bandwidth that is outstanding—up to 528 kHz under 2:1, depending on your radial field. Your internal tuner can get the SWR down to 1:1 on any DX frequency for maximum power transfer and full performance! Of course, another key to performance is a good ground radial system; we recommend 32 radials, 65 ft. long. Fewer radials will work, but with diminished results. DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas feature: -- 5 kW SSB and CW rating—unparalleled reliability -- High power handling capacity--high strength, UV-protected EXTREN® insulators -- Ultra-wide SWR bandwidth and unbeaten gain -- Highest wind ratings—Up to 100 mph with proper rope guying --High strength 6063/6061 tubing manufactured to DX Engineering specifications -- Easy tilt up and down— exclusive antenna mount features DX Engineering's patented Tilt Base, *U.S. Patent Number 7,432,875 -- No rust --100 percent stainless steel tubing clamps and hardware -- Reliability second to none--specially manufactured stainless and aluminum saddle clamps, stainless bolts, and precision machining on each antenna Note: For additional information, please look at the files under the "Documentation" tab. Make plans to install your DX Engineering 80 Meter Full Size Quarter Wave Vertical Antennas and join in the fun of having the best possible signal on the 75 and 80 meter bands with a great antenna!
( 1 )
$899.98
Chameleon Antenna URT1 Mounting Brackets
Chameleon Antenna URT1 Mounting Brackets provide a mounting solution for the Chameleon Antenna URT1 Remote Antenna when used portable with any of the MPAS Ready Antenna System Components. The kit contains a mounting bracket for the URT1, a stainless steel insulated mounting head, and a stainless steel mounting rod as well as stainless steel hardware. Electrical connection to the antenna is accomplished in one of two ways: direct feeding using the insulated mounting head or by coax feeding one of the feed coils such as the CHA-Blank-adapter or the Hybrid Mini. This mount makes the Chameleon Antenna URT1 a versatile addition to your portable antenna lineup. Note: The URT1 is sold separately.
Not Yet Reviewed
$115.00
Diamond Antenna CP5H Five-Band Trap Vertical Antennas
Diamond Antenna CP5H antennas are 5-band (40, 20, 15, 10, and 6 meter) trap vertical antennas with trap radials. Their light weight (6.6 lbs.) makes them very manageable during the installation process and allows for a simple mast solution. Diamond CP5H antennas are 11.8 ft. tall with 71 in. long radials that can be mounted 360 degrees around the antenna or concentrated on one side if you need to mount one close to a structure. Due to their light weight and ability to concentrate radials on one side, the CP5H antennas could be used in an antenna-restricted situation where the mast was lowered on its side during daylight hours and raised while operating during the evening.
( 13 )
$444.99
Butternut Antenna Replacement Parts
Butternut Antenna Replacement Parts enable you to keep your Butternut antennas performing at their peak. They offer their capacitors, coaxial matches, coils, and many other parts. Whether used for maintenance or for repairs due to unfortunate damage, Butternut can provide the replacement antenna parts that you need. Butternut high performance antennas have been available for decades. Maintain your antenna with genuine Butternut replacement parts from DX Engineering!
( 92 )
$21.99
—
$160.99
DX Engineering Replacement TW Antenna Structures
DX Engineering Replacement TW Antenna Structures are direct-replacement structures for the top (DXE-TW-BAS-TOP) or bottom (DXE-TW-BAS-BTM) of your DX Engineering TW Adventurer, Explorer, Globetrotter or Solo Explorer compact vertical dipole antennas. No one ever wants their antennas damaged, but accidents do happen; especially with antennas as portable as these TW Series antennas. Made of high-quality black powder-coated aluminum, these replacement parts are also compatible with older TW portable or stealth antennas. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. If you have need of a replacement top or bottom section of your TW antenna, order DX Engineering Replacement TW Antenna Structures and get your TW antenna back in great shape! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$77.39
—
$139.99
Butternut Mounting Post Sleeves
Butternut Mounting Post Sleeves slip over the mounting tube of Butternut vertical antennas. They may also be used as ground mounting sleeves. These high-quality aluminum sleeves have a 1.25 in. outside diameter, 0.058 in. wall thickness and have a slit at one end. A new stainless steel element clamp is also included. These sleeves are 2-ft. long, plus or minus 1/8 in. When you need a mounting post sleeve for your HF6V or HF9V, then DX Engineering is your source for quality Butternut parts.
( 6 )
$53.99
Chelegance JROD-30 Rope Guying Anchors
Chelegance JROD-30 Rope Guying Anchors are 11.81 Inches long and designed to be screwed down into the ground to provide a solid point to attach rope for guying a portable tripod or mast. Comes with two tools to assist in screwing the anchors in: a manual T-shaped handle and a bit to attach to a battery-operated drill. Featuring a spiral design 6 inches long, and a center rod that is 0.5 inches in diameter, these anchors are easy to drive into most soil and will stay put. Sold as a set of four.
Not Yet Reviewed
$33.99
DX Engineering Vertical Antenna Fixed Base Assemblies
DX Engineering Vertical Antenna Fixed Base Assemblies are intended to support your own 2-in. outside diameter HF lower antenna base section in a fixed vertical position. These base assemblies consist of a unique, reinforced fiberglass insulating channel, which has twice the strength of commonly-used nylon and other insulating materials. They are fastened with stainless steel V-bolt saddle clamps to a rugged 1/4 in. aluminum mounting plate. Their aluminum mounting plate may be bolted to a secure, flat mounting surface or to a user supplied galvanized steel mounting pipe (of up to 1-3/4 in. outside diameter) with optional DXE-SSVC-2P Stainless Steel V-Bolt Clamps (sold separately). When you need an antenna base to hold a fixed-vertical antenna, DX Engineering Vertical Antenna Fixed Base Assemblies are the ones to use. Note: Clamps to mount the stationary plate to a user supplied mounting pipe are sold separately to allow for multiple mounting and clamp choices.
( 1 )
$116.99
Diex Antennas DXV Series Tri-band Trap Shortened Vertical Antennas
Diex Antennas DXV Series Tri-band Trap Shortened Vertical Antennas are shortened vertical antennas for the 20, 15, and 10-meter bands. Diex aluminum tubing antennas provide excellent performance and are crafted with precision in Brazil using quality materials. They are designed to withstand tough environments for long-lasting service. The antennas feature physical adjustments to set the lowest SWR to a specific frequency. The DXSV1 supports power handling of 1,500W+ PEP.
( 1 )
$379.99