Filters
ELAD HF Receive Antenna System Devices
ELAD ASA15 Amplified Antenna Splitters
ELAD ASA15 Amplified Antenna Splitters are designed to distribute the signal received from one antenna to up to five different receivers simultaneously. They utilize an internal divider and ultra-wideband low-noise amplifiers to ensure the antenna signal is effectively shared across all five outputs. Each of the five outputs can provide either 0dB (no gain) or 12dB gain, which helps compensate for long distribution cable run losses or boost weak signals. Additionally, a 15dB attenuator on the input can be switched on to prevent overload. Upgrade your RX antenna distribution system with the ELAD ASA15 Amplified Antenna Splitter, ensuring reliable and high-quality signal reception across multiple receivers.
( 1 )
$327.99
ELAD ASA16 Amplified Antenna Splitters
ELAD ASA16 Amplified Antenna Splitters are designed to distribute the signal from one antenna to up to six different receivers simultaneously. These six outputs are isolated to prevent interference from mismatches, but they do not provide any amplification. A switchable attenuator reduces the input signal by 15dB. A notable feature is the PTT input. When engaged, all receiver ports are isolated by more than 60dB (at 12MHz) from the input. This reliably protects even the most sensitive inputs. The integration into a ham radio station is made easy due to the same switching polarity of most transceivers, when keyed, the PTT output switches to ground. All coaxial connectors on the ASA16 are BNC female, and all inputs and outputs are designed for a 50-Ohm impedance. Three LEDs on the front show the current state of the ASA16: On/Off, Attenuator and PTT state. The ASA16 requires a 12VDC 300mA power supply (not included). The PTT connector is a stereo 1/8in. (3.5mm) male plug. The enclosure is made from brushed aluminum, with solid rubber padding. Upgrade your RX antenna distribution system with the ELAD ASA16 Amplified Antenna Splitter, ensuring reliable and high-quality signal reception across multiple receivers.
Not Yet Reviewed
$305.99
ELAD ASA62 Amplified Antenna Splitters
ELAD ASA62 Amplified Antenna Splitters are designed to distribute the signal from six antennas to two different receivers simultaneously. A powerful Amateur Radio or SWL station requires multiple antennas to optimally cover each frequency range. The ASA62 Amplified Antenna Splitters from ELAD (Italy) allows you to distribute up to six antennas to two receivers. Each input is buffered by a very low-noise amplifier (AD8099), ensuring that the signals do not interfere with each other. By doing so, the signal from one antenna can be sent to both receivers simultaneously. Switching is done via relays, not PIN diodes, to avoid unwanted signal distortion. Operation is straightforward with push buttons on the front panel, and LEDs built into the buttons clearly indicate their status. Alternatively, the ASA62 can be operated remotely, with free software available for download on the Microsoft Windows platform. The frequency range is 9kHz to 70MHz, all connectors are BNC female, and the impedance is 50 Ohms. A DC power supply cable is included. Note that the ASA62 is not suitable for transmitting.
Not Yet Reviewed
$309.99