Availability
HF Receive Antenna System Devices
Configure your HF receive antenna setup for optimum performance with high-quality HF receive antenna system devices. Whether you want to combine two receiving antennas...
Configure your HF receive antenna setup for optimum performance with high-quality HF receive antenna system devices. Whether you want to combine two receiving antennas to form an array or amplify the weakest signals to Q5 copy, DX Engineering makes it possible—and affordable! We offer essential HF receive antenna system devices, including our splitter/combiner, 2-port receiving antenna switch, feedpoint voltage coupler, preamplifiers, and more. Customize your HF receive antenna setup to your specific needs with help from the experts at DX Engineering—shop now!
Configure your HF receive antenna setup for optimum performance with high-quality HF receive antenna system devices. Whether you want to combine two receiving antennas to form an array or amplify the weakest signals to Q5 copy, DX Engineering makes it possible—and affordable! We offer essential HF receive antenna system devices, including our splitter/combiner, 2-port receiving antenna switch, feedpoint voltage coupler, preamplifiers, and more. Customize your HF receive antenna setup to your specific needs with help from the experts at DX Engineering—shop now!
YCCC Receive Feedline Choke Kits
Closeout- Other YCCC array components are no longer available YCCC Receive Feedline Choke Kits prevent common-mode noise or unwanted signal intrusion on the feed lines of YCCC Receive Vertical Array Kits. These choke kits are the same as provided in the array kit packages and may be used as replacements or in other applications. Component-level assembly of these kits is required. A choke enclosure is user supplied. Their function is to provide isolation between the input and output coaxial shield connections, while passing desired receive or control signals. Their isolation impedance blocks common-mode noise or unwanted signals. YCCC Receive Feedline Choke Kits are supplied with standard "F" female connectors to prevent connection to transmitting equipment. All inquiries and technical support for the discontinued YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net
Not Yet Reviewed
$22.00
DX Engineering High CMI Receive Feedline Chokes
DX Engineering High CMI Receive Feedline Chokes achieve exceptionally high isolation between the input and output connector shields to effectively block common-mode RF noise and unwanted signals that collect on 50 or 75 ohm receive antenna feedlines. Ongoing research and development by the design team at DX Engineering has produced two bidirectional Receive Feedline Chokes; a 50-ohm model with BNC female connectors and a 75-ohm model with Type-F female connectors. Both chokes cover the RF frequency range 100 kHz through 30 MHz. They exhibit very high common mode impedance* (CMI typically over 8,000 ohms across the 160, 80, and 40 meter bands) and feature DC pass capability up to 700 mA at 13.8VDC, with extremely low SWR and negligible insertion loss. Affordable DX Engineering High CMI Receive Feedline Chokes will be considered the best, most versatile receive chokes ever produced for typical low band receive antenna applications.
( 3 )
$59.99
—
$64.95
DX Engineering Receive Device Replacement Parts Kits
DX Engineering Receive Device Replacement Parts Kits contain RF chokes and capacitors that are commonly found in bias tee circuits and in many other receiving and control devices. Also known as feedline voltage injectors, bias tee circuits occasionally suffer minor lightning pulse damage. Typically the choke or capacitor is burned out, which can be easily repaired with one of these replacement parts. Contained in each kit are 30 electronic components: • 10 each 100uH RF chokes • 10 each 0.1uF 50V capacitors with 0.2 in. leg spacing • 10 each 0.1uF 50V capacitors with 0.3 in. leg spacing. Click "More Detail" to see the DX Engineering device compatibility chart. Several DX Engineering devices use only one of these parts. None of the devices listed require all three parts; this is a multi-purpose package for the repair bench. These common electronic parts may be used for many other projects around the shack and in station gear, and even for repair of other types of equipment. Use these parts at your own discretion. Technical support for any application is not included.
Not Yet Reviewed
$22.99
Unified Microsystems RAS-4 Receive Antenna Switch
Unified Microsystems RAS-4 Receive Antenna Switch is an outdoor capable remote relay unit that allows the operator to select up to four antennas. Receive only antennas are critical for success on the low bands. Due to the wavelengths of the low bands, these antennas cannot be rotated. Several very effective receive only antennas are mono-directional or bi-directional, including Beverage, Reversible Beverage, Beverage on the Ground (BOG), Reversible Beverage on the Ground (RBOG) and many others,. Therefore, a high quality, low noise four port receive antenna switch is required to cover all of the directions with multiple antennas. Common mode noise pick up can ruin the performance of receive antenna systems, so the RAS-4 isolates both the center conductor and shield of unselected ports. An internal bifilar ferrite choke further reduces common mode currents. This unit features female F connectors for RG6U coax with male F connectors, the standard field-serviceable coaxial cable assemblies for receive antenna systems. A very important requirement for dual feedline Reversible Beverage and RBOG antennas is provided by the RAS-4. By default, unselected ports are terminated for 75 ohms. The user can change to 50 ohm, open circuit, or center conductor-shield short by soldering wire jumpers. The RAS-4 is housed in a NEMA rated enclosure with a gasket lid. A cable gland seals the control cable entry. The internal circuit board has a conformal coating for additional protection. The RAS-4 can be mounted outdoors, with the enclosure flanges or with the included L bracket for mounting to a pole or post. The RAS-4 Receive Antenna Switch is a receive-only relay unit that cannot be used for transmitting antennas. The required in-shack control console switch is not included. The RAS-4 will work with a commercial or a simple home brewed, positive 12V One-of-Four switch. Choose from DX Engineering, EA4TX and others for manual or automated switching. Unified Microsystems RAS-4 Receive Antenna Switch Specifications Antenna Selection: 4 receive antennas to 1 main feedline Dimensions: Approx. 4.5 x 3.5 x 3.25 in. (11.4 x 8.9 x 8.3 cm), not including the bracket. Connector type: F (5 total) Unselected port termination: 75 ohm default; 50 ohm; open; shorted. Wire jumper selectable VSWR: < 1.5:1 from 100 kHz to 20 MHz Insertion loss: < 0.4dB from 100 kHz to 20 MHz Port to Port Isolation: > 45dB from 100 kHz to 20 MHz Control Cable: 3 wire plus ground (4 total conductors), Not included Switch Controller: 12 to 14 Vdc, Not included
( 2 )
$124.95