Selected Filters


Availability


20 Results Found For "Receive Array"

Part Groups

Results 1 - 20 of 20

Hi-Z® Antennas PC-8PRO 8 Circle Array Phasing Controller

The Hi-Z Antennas PC-8PRO 8 Circle Array Phasing Controller is the primary component in the Hi-Z Antennas Eight Element V2 Multi-Band 8 Circle Receive Array System, intended for 160-, 80- and 40-meter band coverage, with useful functionality from 500 kHz to 15 MHz. The HIZ-PC-8PRO Phasing Controller and system components combine to provide an effective directional receive pattern that is electronically switchable to eight different directions. The Hi-Z Antennas Eight Element V2 Multi-Band 8 Circle Receive Array System provides enhanced signal-to-noise performance with Receive Directivity Factor (RDF) approaching 12dB and up to 35dB array front-to-back! The HIZ-PC-8PRO is the heart of this antenna which provides dramatically improved reception over transmitting antennas. It properly combines signals from eight receive short element active verticals which are each ground-mounted on a ground rod, in a circle. DXE-RSEAV-1 are sold separately, which use DXE-AVA-3 Element Amplifiers. Sharper cardioid patterns with deeper reverse nulls are developed by the 8 Circle than other arrays. This Phasing Controller and other system components provide an effective receive pattern that can be electronically rotated to eight different directions: typically, 45, 90, 135, 180, 225, 270, 315 and 360 degrees. Standard 85 ft. diameter 8 Circle Arrays provide 160-, 80- and 40-meter band coverage with an exceptional cardioid pattern, supported with the updated delay cables HIZ-DL4-60-85 (Long and Short, sold separately). Alternatively, choose HIZ-DL4-80-113 cables (Long and Short, sold separately) for a 113 ft. diameter 8 circle which increases performance on the 160 and 80 meter bands. The HIZ-MDC-8PRO is the required Manual Directional Control Switch Console, sold separately. The HIZ-PC-8PRO also serves as a replacement part for Hi-Z 8 Circle system owners to order Hi-Z PC-8PRO V2 Phasing Controller. See the listing for more information.

5.0 out of 5 stars ( 1 )

$649.00

DX Engineering Receive Eight Circle Array Controller and Switch Package

DX Engineering Receive Eight Circle Controller and Switch Package, DXE-RCA8C-SYS-2P, is for the array builder who wants to use their own passive receive verticals for a mono-band receive array. The DX Engineering Eight Circle Array will dramatically improve reception of weak distant signals with unparalleled rejection of extraneous signals and noise. This eight-direction switchable array uses a special end-fire/broadside combination of eight short receiving vertical elements. The resulting narrow directional receiving pattern is superior to standard or short Beverage antennas, Reversible Beverage systems and typical two, three or four element arrays. Receive arrays of short vertical elements limit signal and noise for dramatically superior weak signal reception as compared to full size transmitting antennas and arrays. With proper spacing of eight vertical elements, the Receive Eight Circle Array is the ultimate high performance, directional receive antenna for HF Amateur, SWL or AM DXing. DX Engineering Receive Eight Circle Arrays offer directional performance comparable to eight very long phased Beverages, using far less land area. These packages are designed to be used with eight identical, user-supplied, active or passive symmetrically-spaced vertical elements to provide switching for an 8-direction receiving antenna system. Passive elements will generally provide you with a monoband receiving system. With a DX Engineering Active Vertical package you can achieve excellent directional receiving performance over three bands. Click "More Details" below for additional information, features and specifications. The "Documentation" link contains manuals and associated files for complete product installation information. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best. Order the DX Engineering Receive Eight Circle Controller and Switch Package.

Not Yet Reviewed

$815.98

DX Engineering Receive 8 Circle Array Controllers

DX Engineering RCA8C-1 Receive 8 Circle Array Controllers are the highly sophisticated switch controller relay units from the Eight Circle Array Systems--the receiving systems that use time delay phasing--rather than the conventional narrow-band, frequency-dependent phasing, to provide eight 45 degree spaced directional patterns. The RCA8C time delay phasing is directivity-optimized to produce wider and deeper rear nulls and a narrower main lobe. The result is that noise and undesirable signals are greatly reduced for a superior front-to-rear ratio (F/R). Better control of phase and currents provides a cleaner pattern with the Receive 8 Circle than is available with vertical antenna transmit arrays. DX Engineering Receive 8 Circle Array Controllers are designed to be used with eight identical vertical active or passive vertical elements, symmetrically spaced in a large circle, to provide switching for an 8-direction receiving antenna system. Passive elements will generally provide you with a monoband receiving system. Finally, these systems offer greater reliability in receiving applications. Receive Eight Circle Array Controllers use sealed relays sized for receiving applications with silver contacts to prevent oxidation and contamination. Most transmitting four-square switches use large open-frame relays where the contacts are exposed to the air, which can lead to contamination. Relays with brass contacts can oxidize, leading to poor conductivity. Receive Eight Circle Array controllers feature: * W8JI design * Operation from 100 kHz to 30 MHz * Excellent directivity for better signal-to noise ratio * Switching console provides eight 45 degree spaced directions * Less physical space and maintenance required than phased Beverage antennas * Low current DC powered control console allows system operation without AC power mains The optional DX Engineering Eight Circle Receive Short Element Active Vertical Antenna Package, DXE-RSEAV-8, offers excellent receiving performance from 100 kHz to 30 MHz, while using only a 8.5 ft. (2.6m) aluminum vertical antenna elements. A unique design makes the Receive Eight Circle Array System vastly superior to traditional active vertical antennas in both strong signal handling and feedline decoupling. This results in significantly better weak signal reception due to lower spurious signal interference and reduced noise. DX Engineering RCA8C Receive 8 Circle Array Controllers are the foundation of your Eight Circle Array!

Not Yet Reviewed

$499.99

DX Engineering Receive Eight Circle V3 Complete Array Systems

DX Engineering Receive Eight Circle V3 Complete Array Systems, DXE-R8C-SYS-V3, provide outstanding reception of weak distant signals. This eight-direction switchable array uses a special end-fire/broadside time delay phasing of eight stealthy 8.5 ft. (2.6m) active vertical elements to cover multiple HF Amateur bands. The Eight Circle pattern rejects extraneous signals and noise far better than Beverages and other arrays. With appropriately located elements, the Receive Eight Circle Complete Array System is the ultimate high-performance directional receive antenna for HF Amateur, SWL or AM DXing. –––––– Click or tap the title of a listed item for an Overview with a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.

Not Yet Reviewed

$3,447.34

DX Engineering Receive Four Square Array V3 Systems

DX Engineering Receive Four Square Array V3 Systems, DXE-R4S-SYS-V3, dramatically improve reception of weak distant MW and SW signals with excellent rejection of extraneous signals and noise. This is a four-direction switchable phased array that is able to cover multiple HF Amateur bands, such as 160, 80 and 40 meters, by using time delay phasing of four physically short active receive vertical elements. The resulting directional receiving pattern has deep back and side nulls that are superior to Beverage antennas and other receive arrays. The DX Engineering Receive Four Square Array is less susceptible to high angle signals than EWE, Flag, Pennant, K9AY and SAL antennas. Short vertical element receive arrays limit interfering signals and noise for dramatically superior weak signal reception, as compared to full size transmitting antennas and arrays. With the appropriate location and spacing of the four stealthy 8.5 ft. (2.6m) vertical elements, the Receive Four Square Array V3 System is a high performance, directional receive antenna for HF Amateur, SWL or AM DXing. Click or tap the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. DX Engineering Receive Four Square Arrays offer directional performance comparable to four long Beverage wire antennas, while using far less land area. In the appropriate clear area, away from metal, structures and other antennas, each of the four Actives simply mount inches above the earth onto a ground rod. Each element is installed on the corners of the array square with sides that are one-eighth to one-quarter wavelength on the lowest band. For example, the optimized Receive Four Square Array for 160, 80 and 40 meters has elements spaced 70 ft. apart. The DXE-R4S-SYS-V3 system includes the DXE-RFS-3 Receive Four Square Array Controller, four Receive Short Element Active Vertical Antennas, DXE-RSEAV-1, featuring the new DXE-AVA-3 Active Matching Units, insulating mounting plates and stainless hardware. These Active Antennas are packed in a 38 x 5 x 5 in. carton for lower shipping cost. Three sections of 3 ft. aluminum tubing, 0.500, 0.375 and 0.250 inch OD, assemble to a height of only 8.5 ft., so each self-supporting element is truly stealthy. This complete array system also includes the DXE-EC-4 Directional Control Console, one 1,000 ft. roll of quality RG6U cable, all cable prep tools, connectors and hardware for construction of the array. Required ground rods and control cable are purchased separately. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX signals that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best. Order and install the DX Engineering Receive Four Square Array V3 System.

3.33 out of 5 stars ( 3 )

$1,929.39

DX Engineering Receive Four Square Array Controllers

The patented DXE-RFS-3 DX Engineering Receive Four Square Array Controllers are the heart of a sophisticated receiving system that uses time delay phasing rather than the conventional narrow-band, frequency-dependent phasing systems. The time delay phasing is directivity-optimized to produce wider and deeper rear nulls and a narrower main lobe. The result is that noise and undesirable signals are greatly reduced for a superior front-to-rear ratio (F/R). Better control of phase and currents provides a cleaner pattern than those found on available transmit four square arrays. The RFS-3 DX Engineering Receive Four-Square Array Controllers are the switch relay units that are optimized to use the DX Engineering's Active Vertical Antenna Package DXE-ARAV4-4P of four active verticals. These products together offer great F/R response over octaves of bandwidth. DX Engineering's Active Receive Antenna System offers excellent receiving performance from 100 kHz to 30 MHz, while using only a 8.5 ft. antenna element. A unique design makes it vastly superior to traditional active antennas in both strong signal handling and feedline decoupling. This results in significantly better weak signal reception due to lower spurious signal interference and reduced noise. Finally, these systems offer greater reliability in receiving applications. The RFS-3s use sealed relays sized for receiving applications with silver contacts to prevent oxidation and contamination. Most transmitting four-square switches use large, open-frame relays where the contacts are exposed to air, which can lead to contamination. Relays with brass contacts can oxidize, leading to poor conductivity. Advantages of the RFS-3 Receive Four-Square Antenna Systems over other small or medium-size receiving arrays include: * Reduced susceptibility to high angle signals compared to EWE, Flag, Pennant, and K9AY antennas * Excellent directivity in a small space for better signal-to-noise ratio * Switchable in four 90 degree spaced directions * Directivity over a very wide frequency range using DX Engineering DXE-ARAV4-4P active elements * Less physical space required than a Beverage antenna, and active elements need only a minimal ground system * Enhanced relay contact reliability

Not Yet Reviewed

$375.99

DX Engineering Receive Four Square Array Electronics Package

DX Engineering Receive Four Square Array Electronics Package, DXE-RFS-SYS-2P, is for the array builder who wants to use their own passive receive verticals for a mono-band receive array. See the DXE-R4S-SYS-V3 for the Complete Receive Four Square V3 Array System with Receive Short Element Active Verticals. DX Engineering Receive Four Square Arrays dramatically improve reception of weak distant signals with excellent rejection of extraneous signals and noise. This four-direction switchable array uses time delay phasing of four physically short receiving vertical elements. The resulting directional receiving pattern is superior to four short Beverage antennas and typical two or three element arrays. The Receive Four Square is less susceptible to high angle signals than EWE, Flag, Pennant, K9AY and SAL antennas. This type of receive array, using physically short vertical elements, limits signal and noise for dramatically superior weak signal reception, as compared to full size transmitting antennas and arrays. With proper spacing of four unobtrusive, physically short vertical elements, the Receive Four Square Array System provides high performance directional receive for HF Amateur, SWL or AM DXing. Click or tap the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. DX Engineering Receive Four Square Arrays offer directional performance comparable to four long Beverage wire antennas, using far less land area. This Controller and Switch Console package is designed to be used with four identical, user-supplied, active or passive symmetrically-spaced ground-mounted vertical elements to provide switching for a 4-direction receiving antenna system. Passive elements will generally provide an optimized monoband receiving system. Conversely, with four DX Engineering Receive Short Element Active Vertical antennas, DXE-RSEAV-1, the properly sized array can achieve excellent directional receiving performance over three HF bands. Build an exceptionally effective, electronically rotatable, stationary receive antenna that lets you hear the DX that cannot be heard on a transmit antenna. Dig the weak signals out of the noise with an antenna that can help make your station one of the best; install the DX Engineering Receive Four Square Array System. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.

Not Yet Reviewed

$553.98

Hi-Z® Antennas Manual Directional Control Consoles

Hi-Z® Antennas Manual Directional Control Consoles are specialized "low-side" BCD grounding switches that are specifically designed to operate Hi-Z Antennas Phasing Combiner relay units, also known as Phase Controllers. Each HIZ-MDC console controls the phasing and direction selection of only Hi-Z Antennas Receive Vertical Antenna Arrays and supplies power to the array element amplifiers. Hi-Z Antennas Manual Directional Control Consoles are attractive and convenient, featuring a large rotary switch knob and green LEDs arranged as receive array directional azimuth indicators with corresponding compass bearing degree markings on the front panel. Selection of a specific model Manual Directional Control Console (MDC) is required, corresponding to each version of Hi-Z Antennas Receive Array Phasing Combiner or legacy Phase Controller. Each console serves as a replacement for legacy, discontinued Hi-Z manual Shack Switches, and for the discontinued Hi-Z SS-2 and SS-2PLUS: • HIZ-MDC-4 works only with the multiband Four Square Arrays PC-4A and PC-4ELEMENT • HIZ-MDC-8PRO works only with the 85/113 ft. diameter multiband 8 Circle Arrays PC-8PRO and PC4-8PROUP/PLUS • HIZ-MDC-8 works only with the 200 ft./100 ft. diameter monoband 8 Circle Arrays PC-8, PC-8A and PC-8B HIZ-MDC series Manual Directional Control Consoles are stylish, rugged, and heavy — they stay in place on the desk or shelf with four large non-skid rubber feet under a Stainless Steel chassis and an appropriate black powder coated steel cover. The required multi-conductor array power and BCD control cable (purchased separately for the required number of conductors and length to the array) passes through a grommet on the rear panel and connected internally. A rear panel 2.1mm +13.8VDC power connector accepts the included mating 2.1mm plug and unterminated DC power cable, for connection to a user provided +13.8VDC 1A fused, well-filtered power supply.

Not Yet Reviewed

$159.99

Clearance

Hi-Z® Antennas Array Phase Combiner Units

Hi-Z® Antennas Array Phase Combiners are the relay unit at the center of a Hi-Z array, also known as a "phase controller." The sophisticated RF phasing and switching electronic devices have connections for the receive short element active vertical feedlines, delay lines, and the main feedline that goes to the station. Control cable connections to the phase combiner powers the array and steers the array pattern, and the station end connects to the directional control console.

Not Yet Reviewed

$325.00


$227.50

Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables

Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables are essential components for the Hi-Z 4 Element V2 4 Square and Hi-Z 8 Element V2 Multi-Band 8 Circle Receive Array Systems. These are the high quality RG-6U coaxial cables that are precision tuned by DX Engineering and terminated with compression-style weather resistant male F connectors. These Hi-Z DL4 V2 Delay Cables must be selected and purchased separately, depending upon the desired array band coverage and corresponding size of the array, detailed below. Each are permanently connected to the 4 Square or 8 Circle Phase Controller "Long Delay" and "Short Delay" female F connectors upon array installation. SMALL ARRAY dimensions for maximized multi-band reception require the selection of one HIZ-DL-4-60-85L (Long) and one HIZ-DL-4-60-85S (Short), as recommended by Hi-Z for: * 4 Square Array with element side spacing of 60 ft. * 8 Circle Array with a diameter of 85 ft. Overall excellent cardioid patterns are achieved for enhanced, low noise reception on all three low band bands--160, 80, and 40 meters with very good receiving results on 30 meters as well. LARGE ARRAYS that are dedicated for ONLY 160 and 80 meters, one HIZ-DL-4-80-113L and one HIZ-DL-4-80-113S are for: * 4 Square Array with element side spacing of 80 ft. * 8 Circle Array with a diameter of 113 ft. Large array spacing and longer delay cable allows the user to manipulate the achieved patterns and the resulting Receive Directivity Factor (RDF) for their desired band coverage optimization. This also requires the change of four jumpers inside the respective phase controller. See the array phase controller instructions for details on jumper settings for alternative delay lines, patterns and performance.

Not Yet Reviewed

$33.99

—

$48.99

Hi-Z® Antennas DL-3A Delay Cables

Hi-Z® Antennas DL-3A Delay Cables are an essential component of the Hi-Z Three Element V2 Triangular Array, required for installation of the a HIZ-PC-3A Phasing Combiner. Order one HIZ-DL-3AL Long Delay Cable for 40 ft. element spacing of the Hi-Z Three Element V2 Triangular Array. For arrays larger than 40 ft. element spacing, add one HIZ-DL-3AS Delay Cable Set, which includes three 3 ft. extension cables to provide adjustment capability for array size. Use all three for an array with 50 ft. element spacing. The 23 ft. DL-3AL is combined in-line with a single or multiple 3 ft. extensions from the DL-3AS. They connect in series to the PC-3A V2 Phasing Controller Delay Line ports. Signal delay with added cable segments allows the user to accommodate different size arrays, 40 through 50 ft. element spacing, or to manipulate the patterns to achieve changes in Receive Directivity Factor (RDF). See the Hi-Z Three Element V2 Triangular Array Phasing Combiner listing for additional information.

Not Yet Reviewed

$29.99

—

$35.99

YCCC Vertical Array Directional Switch Console Kits

Closeout- Other YCCC array components are no longer available YCCC Vertical Array Directional Switch Console Kits were used to control the YCCC vertical array combiner/controller units, which have been discontinued. They feature an attractive cabinet with an ergonomic direction-selector knob and direction indicating LEDs. Power Pole type connectors are used for DC power connection. These kits require component-level assembly and soldering parts to a PCB. The switching console is installed in the shack, with the control cable run from the switching unit to the combiner/controller unit at the array. Power for the entire antenna system is provided by a 13.8V DC (1A capability or greater) power supply that the user must provide. Use of a "wall wart" type of power supply is not recommended because they generally have very poor DC regulation. These switch units are for use ONLY with YCCC vertical antenna arrays, which are discontinued and no longer available for sale. All inquiries and technical support for these YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net

Not Yet Reviewed

$60.00

DX Engineering Receive Short Element Active Vertical Antennas

DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.

4.75 out of 5 stars ( 4 )

$249.99

—

$1,999.92

DX Engineering AVA-3 Active Matching Units

DX Engineering AVA-3 Active Matching Units are state-of-the-art broadband receive RF operational amplifiers that achieve unparalleled weak signal reception across the radio frequency range from 40 kHz* to 30 MHz. They work as a high impedance buffer between a short antenna element of 6 to 24 feet and an economical 75 ohm feedline. The AVA-3 and a short element are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. The gain adjustable AVA-3 is the sole upgrade and drop-in replacement for all discontinued receive array element amplifiers including Hi-Z Antennas AMP, PLUS6-AMP, AMP-V2 and AMP-PLUS-V2 as well as DXE-AVA-2 and AVA-1. The DXE-AVA-3 Active Matching Unit is the heart of the new line of DX Engineering Receive Short Element Active Vertical Antennas, DXE-RSEAV-1. Compared to large antennas, this amplified short element method dramatically improves signal-to-noise performance for excellent VLF, LF and HF weak signal reception. Click or tap the title of the listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. The AVA-3 Active Matching Unit provides these features and benefits: • Ultimate frequency coverage of 40 kHz* to 30 MHz for VLF through HF (including the 2200m and 630m Amateur bands) • High Third Order Intercept (TOI) Performance +39dBm for superior strong signal handling equal to top transceivers • Consistent unit to unit gain for greatly improved array performance • Virtually Flat Gain (+/-0.4 dBm) across the entire frequency range • Internally settable gain (default -6, 0, or +6 dBm) for different ambient noise locations and element sizes • Direct DC via second F connector – internal settable choice for separate DC and RF coaxial cables for best performance, or standard Bias Tee DC on the RF coax • Each DXE-AVA-3 Active Matching Unit operates on 12 -15 VDC at 25mA • Element is grounded when power is removed • 75 ohm F connectors support field serviceable RG-6 Quad Shield suitable up to 1,000 feet for VLF through HF *Frequency coverage below 200 kHz requires Direct DC on a separate DC only coaxial cable. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace and upgrade all the element amplifiers in the array with fully compatible DXE-AVA-3 units.

5.0 out of 5 stars ( 6 )

$139.99

DX Engineering Receive Feedline Transformers

DX Engineering Receive Feedline Transformers are designed to match your receive antenna 75 ohm output impedance to the nominal 50 ohm input impedance of most receivers. These transformers may be used in almost any receiving application that requires a 75 ohm Type F connection to a 50 ohm BNC connector. These transformers have very low loss (<0.3 dB) and very wide bandwidth, 100 kHz to 30 MHz! Matching the receive antenna or array to the receiver ensures the best possible performance as a result of a system impedance match. *Important! - These Feedline Transformers are Intended to be used on an RF ONLY coax and should NOT be used for power.

5.0 out of 5 stars ( 1 )

$55.99

DX Engineering Receive Feedline Voltage Couplers

DX Engineering FVC-1 Feedline Voltage Couplers provide an interface between control switches and voltage-controlled antenna systems. These specialized controllable bias-tee devices place 0V DC, +12V DC, -12V DC, and 12V AC output voltages onto the receive antenna feedline via the 75 ohm F connector or onto a 2-conductor control line. These FVC-1 couplers function from below 500 kHz to 30 MHz and provide four selections for switching antenna array directions or changing from one array to another. These couplers were designed for use with; the DX Engineering receive-only four-square antenna systems, reversible Beverage antenna systems, and remote switches. DX Engineering switch control consoles may be connected directly to the BCD switch control input of FVC-1 couplers. Alternatively, you may use your own 12V DC voltage switching system or 1 of 4 grounding switches to control the coupler by resetting internal jumpers. The connection of the feedline voltage couplers to any radio receive antenna input is to be made using either the standard RCA phono or the F connector. This allows for the use of readily available RF-compatible RCA phono patch cords or a 75 ohm coaxial cable and connectors, which protects your receive system from an accidental connection to transmitting equipment. FVC-1 feedline voltage couplers have two LED indicators--red and green--which indicate the presence and polarity of the output control voltage selected. The LEDs may function as directional indicators that can be read at a convenient distance or they can aid in troubleshooting. Each of our DX Engineering FVC-1 Feedline Voltage Couplers comes with a heavy duty 120V AC wall transformer, which provides a safe 12V AC to operate your receive antenna system. Here are other exclusive features of FVC-1 voltage couplers: * Metal housing--superior shielding, rugged, and easy mounting * Convenient installation--mount anywhere in your shack * Rugged control connector - a reliable, solderless, and removable connector with screw conductor clamps * Internal thermal reset fuse offers full protection against accidental shorts Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Got antenna switching voltages? DX Engineering FVC-1 Feedline Voltage Couplers will solve many switching needs easily and economically!

5.0 out of 5 stars ( 1 )

$185.99

DX Engineering 2-Port Splitter-Combiners

DX Engineering 2-Port Splitter-Combiners are receive signal-level RF devices that operate from 300 kHz to 30 MHz, available in 50 ohm and 75 ohm versions. They're typically used to split one RF signal to properly feed two receivers, or the receive antenna inputs of one transceiver and one separate receiver. They also properly combine two receiving antennas in phase, such as Beverage antennas, to form a phased receive array. Important features of the DX Engineering 2-Port Splitter-Combiner: * Available for 50 ohm and 75 ohm systems * Broad, 300 kHz through 30 MHz operating range * High-quality components * Isolated ports * Metal housing for superior shielding and longer life * Reliable side-mount connectors: BNC female for 50 ohm, F female connectors for 75 ohm model * Economical solution to potential impedance errors that cause losses With the updated "SC" versions of the original 2-Port Splitter-Combiner, DX Engineering has maintained the port isolation design that prevents signal performance degradation caused by impedance errors in less-than-perfect receive systems. The normal signal level reduction when used as a splitter is just over 3 dB per port. As with any system, losses are dependent upon source and load impedances being matched. DX Engineering Splitter-Combiners provide equal power, voltage, and current to matched loads on ports 1 and 2. The primary advantage is that individual receiver input variations, or a band filter attached to only one port, will not seriously affect the signal level in the other receiver. In addition, any spurious signals generated in one receiver are greatly attenuated by the 2-Port Splitter-Combiner before reaching the second receiver. When splitting in-phase signals, the loss is somewhat less. Any unused port of the 2-Port Splitter-Combiner should be terminated and specified losses are based on source and load impedances being matched. The DX Engineering 2-Port Splitter-Combiner is a passive device; therefore it requires no power to operate. Use the 75-ohm version for combining two 75 ohm antenna feedlines into a single 75 ohm feedline with negligible loss; or use the 50-ohm version for 50-ohm antennas and feedlines. Examples for applications are for two antennas forming an in-phase (broadside) receiving array, a cross-fire Echelon Beverage array, or any type of array with fixed phasing. There are a number of advantages to using these units for combining antenna systems over a standard parallel connection: * Splitter-Combiners match the entire antenna system to the feedline impedance; conversely, paralleling feedlines by using a T-connector divides the impedance in half, causing mismatched losses * With antennas connected directly in parallel, if either one develops a high impedance open, becomes shorted, falls down, or has a feedline problem, the entire antenna system may become unusable. By using the 2-Port Splitter-Combiner, only the problem antenna is unusable; the antenna on the other port can still be used * Unlike quarter wave matching sections that only work on one band, these Splitter-Combiners have extremely wide bandwidth * Due to the built-in isolation and balancing, these units limit the signal loss to approximately 3 dB per port * 2-Port Splitter-Combiners provide very high isolation between ports 1 and 2; this prevents either antenna from interfering with the other during normal operation Note: These devices cannot be used for FM broadcast, VHF, UHF, CATV or Satellite TV. They operate only MF through HF. Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.

5.0 out of 5 stars ( 5 )

$100.99

—

$107.99

DX Engineering Aluminum Receive Element Kits

DX Engineering Aluminum Receive Element Kits provide the parts to make short antennas that are used in receive arrays with special antenna amplifiers. Mounts, clamps, tubing sections and a special insulator are included.

4.5 out of 5 stars ( 2 )

$309.99

YCCC Receive Feedline Choke Kits

Closeout- Other YCCC array components are no longer available YCCC Receive Feedline Choke Kits prevent common-mode noise or unwanted signal intrusion on the feed lines of YCCC Receive Vertical Array Kits. These choke kits are the same as provided in the array kit packages and may be used as replacements or in other applications. Component-level assembly of these kits is required. A choke enclosure is user supplied. Their function is to provide isolation between the input and output coaxial shield connections, while passing desired receive or control signals. Their isolation impedance blocks common-mode noise or unwanted signals. YCCC Receive Feedline Choke Kits are supplied with standard "F" female connectors to prevent connection to transmitting equipment. All inquiries and technical support for the discontinued YCCC kits and kit packages is handled by e-mail only, typically within two to three business days: yccctechsupport@verizon.net

Not Yet Reviewed

$22.00

DX Engineering NCC-2 Receive Antenna Phasing Systems

Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!

4.89 out of 5 stars ( 19 )

$955.99

  • 1
  • Page 1 of 1