Filters
VHF/UHF Beam Antennas
Momobeam Mono6-6HD Monoband Yagi Antennas
Momobeam Mono6-6HD Monoband Yagi Antennas are full size, high performance antennas designed for the 6 meter (50MHz) amateur band, utilizing a five element configuration consisting of a reflector, driver, and four directors to deliver strong, reliable gain and directivity. Built on a robust square boom, these antennas are engineered to withstand harsh environmental conditions, including strong winds, ice, and snow, making them ideal for demanding installations. They are powered directly with a 50 ohm feed through a single coaxial line connected to a included 2kW 1:1 RF choke balun, ensuring clean and stable performance. Momobeam designed these Mono6-6HD antennas to operate across a wide bandwidth without requiring user adjustments, offering operators a straightforward and dependable setup. For proper operation and positioning, the Mono6-6HD requires a light duty rotator.
( 1 )
$1,121.99
EAntenna VHF and UHF Directional Antennas
EAntenna VHF and UHF Directional Antennas include exciting new offerings for the 50, 144 and 430 MHz bands. Weak-signal enthusiasts will enjoy using these high quality beams with superior specs for SSB, CW, digital and satellite. Here are the original low-noise Loop Fed Array mono-band beams or Optimized Wideband Arrays for VHF and UHF. Plus there are super specialized 2 meter or 70 cm Cross Polarized Yagis and the compact EAntenna 6 meter Moxon antenna that has only a 3 ft. boom! NOTE: The dual-band beams for 2 meters and 70 cm designed by DK7ZB cover 144 to 146 MHz and 420 to 440 MHz, which is the entire band in Europe. In the USA they are suitable for use on SSB, CW, digital and satellite as a horizontally polarized antenna. They will NOT function for the American FM Simplex and Repeater band sections of 146 - 148 MHz and 440 -450 MHz. DX Engineering recommends antennas manufactured by EAntenna because their attention to detail is meticulous! These Yagi, log periodic and rotatable dipole antennas are built with only the highest quality stainless steel hardware and aircraft grade aluminum. As you look through their selections, be aware that advanced, cutting-edge computer modeling and optimization techniques were used to produce EAntenna premier HF beams and state-of-the-art VHF and UHF antennas. Their mechanical designs are very robust in every way, as most are rated for at least 100 MPH wind survival. To see additional information about each antenna, click on the "More Details" link on the antenna of interest. Then click the Specifications tab to see all of the physical and electrical characteristics of that antenna. EAntenna products are offered exclusively in North America by DX Engineering. Plus we can ship internationally! When you are making plans for a new antenna at your station, plan to look right here for the outstanding solutions by EAntenna, "The Best Choice for Your Antenna System!" NOTE: Manuals are normally supplied bilingual. If your manual lacks an English section, contact DX Engineering for an English version. IMPORTANT: EAntenna VHF and UHF Loop Fed Antennas are intended to be mounted horizontally for SSB and CW operation which is at the lower frequency end of the bands, NOT on FM. For example, the 2 meter LFA should be mounted horizontally and is tuned for use on 144-146 MHz and is not intended for FM use on 146-148 MHz. Additionally, the DK7ZB design EAntenna dual-band beams for 2 meters and 70 cm cover only 144-146 MHz and 420-440 MHz, the same European frequency range, and so they are not suitable for FM use in North America. EAntenna Cross Polarized LFA beams have both horizontal and vertical elements with only 144.0 - 144.5 MHz coverage designed specifically for EME or satellite enthusiasts.
( 61 )
$1,499.99
OptiBeam VHF Directional Antennas
OptiBeam VHF Directional Antennas include classic Yagis for the 6 meter band. Computer designed, optimized and meticulously hand-crafted, all of their antennas are extensively tested to confirm their ultimate performance in the real-world. OptiBeam is the world-renown manufacturer of top-quality HF directional antennas that deliver ultimate performance and lasting value. This accomplishment is the result of over 15 years of unrelenting dedication to excellence in design and the highest standards in manufacturing. OptiBeam antennas are designed for the highest possible gain, excellent front-to-back ratios and clean radiation patterns, rather than only for low SWR as in most competing brands. Many models have full-size elements and all OptiBeam represents the standard for optimal band coverage, efficiency and power handling, all without compromise. OptiBeam has achieved exceptional electrical performance in their directional mono-band and multiband Yagi and Log Cell Yagi antennas. Plus, OptiBeam antenna elements are perfectly aligned for an excellent visual appearance. Computer designed, optimized and meticulously hand-crafted, these new-age antennas are tested extensively to confirm that computer models are matched by real-world performance. They have been proven in the field to be the best by the most demanding hams around the world! Other manufacturers have attempted copies and have failed to achieve the true qualities of a genuine OptiBeam antenna. OptiBeam products are now made by WiMo for dedicated hams who understand the value of investing in proven performance and unsurpassed mechanical quality. They are built to withstand the harshest conditions using the very best materials. OptiBeam antennas are designed to be easier to build than others, with every part carefully sorted, clearly labeled, and extremely well packed for worry-free shipment and straightforward construction and installation. Click on the OptiBeam VHF antenna models listed below to see complete technical details. Your new VHF or HF beam, should be the best antenna available. After all, the antenna is "where the rubber meets the road" – and how your RF actually makes waves. Order the best available directional antennas – OptiBeam – from DX Engineering.
Not Yet Reviewed
$1,349.99