Availability
Wire Antennas and Parts
Par EndFedz® Antennas
Par EndFedz® Antennas are End Fed Half Wave (EFHW) antennas with the match box coax connection at the end of the wire, for convenient and quick stealth portable operations. These single-band and multi-band antennas can be mounted horizontally, vertically, or as a sloper. No ground plane or counterpoise is needed so portable operation could not be easier. Simply hang the far end from a tree limb or send the wire out a hotel room window or balcony. You can use a telescoping fiberglass mast to get the antenna really high in the air and the supplied end insulators the installation easy. Stealth operation in CC&R and HOA antenna restricted locations is simplified. Their all-black construction makes them difficult to see. Each Par EndFedz® features a UV-resistant black ABS plastic housing with a support rope attachment hole that encloses a matching network to allow the antenna to be fed with standard 50 ohm coaxial cable with a PL-259 (UHF male). All hardware is stainless steel and the SO-239 (UHF female) connector is silver plated and has a PTFE dielectric. The antenna wires are either 18 or 26 AWG stranded Copperweld® with 200 pound breaking strength and a tough, 100% UV stable black polyethylene jacket. One end of the antenna wire has a #10 solder lug making attachment to the matching network feedpoint simple and easily replaceable, if necessary. Standard single and multi-band versions handle 100 or 200 watts and higher power versions handle 300 watts. Lightweight QRP PolyStealth models handle 25 watts and are ideal for portable operation because they are lightweight; the MKII model weighs only 8 ounces and the Trail Friendly model weighs only 3.5 oz. Par EndFedz® Antennas require no counterpoise or extra conductors. The EF-ALLBAND-KW model, about 133 ft. in length, covers eight bands, 80 through 10 meters. The ALLBANDKWJR is 74 ft. in length and operates on five bands, 80-10 meters. The 64 ft. EF-40-10-KW operates on four bands. All three models handle up to 1000 watts SSB/CW and 250 watts AM/Digital Modes. The need for an external tuner may vary based on the antenna model selected and the desired operating band. The manufacturer refers to these antennas as "End-Fed Dipoles" based upon the assertion that a "half-wave radiator is a dipole." This is a variant of the classic definition of a dipole which is a center-fed antenna with two radiating legs running in opposite directions from the feed point. Additional claims about the EFHW state that end feeding a half-wave "can energize the radiator 'nearly' as well as a center-fed." Recent anecdotal measurements indicate that the EFHW radiates about 70% as well as a traditional center-fed dipole. More information is available at each Par EndFedz® model listed below. Order yours from DX Engineering.
( 233 )
$44.99
—
$189.95
Buckmaster OCF Dipole Antennas
Buckmaster OCF Dipole Antennas are made from the best quality materials with a completely potted waterproof balun and no external connectors. They are designed to give you years of trouble-free service! Buckmaster antennas are shipped fully assembled, ready to deploy with no tuning or trimming required. Choose a model with a 300 watt balun or a 3,000 watt balun. Each has a weather protected SO-239 connector. They are offered in three lengths to operate in these bands: - 270 ft. models cover 160, 80/75, 40, 20, 17, 12, 10, 6 meters - 135 ft. models cover 80/75, 40, 20, 17, 12, 10, 6 meters - 68 ft. models cover 40, 20, 10 and 6 meters Classic OCF (Off-Center Fed) antennas, like Buckmaster, typically have the feedpoint at the 2/3 and 1/3 point on the overall half-wave wire antenna. That means one leg is twice as long as the other. They are intended to be installed with the feedpoint at 35 ft. and the ends at about 15 to 25 ft. However, other installations such as a horizontal "flat top" can work very well. A tuner may be required for best SWR. Buckmaster OCF Dipole Antennas are a very simple way to get on the air and work multiple bands… quickly! They are a great choice as a first antenna or as a supplement to others. Order your Buckmaster OCF Dipole from DX Engineering.
( 67 )
$276.00
—
$544.00
PackTenna PT-101 Mini End-Fed Random Wire Antennas
PackTenna PT-101 Mini End-Fed Random Wire Antennas are Compact, lightweight trail-ready portable HF antenna systems ideal for POTA, SOTA activations, camping, backpacking, and travel. The PackTenna Mini Random Wire Antenna combines a 9:1 UNUN, wire winder, and antenna wire in a compact unit that is quick to set up and take down and toss into a backpack. The antenna comes with 29 feet of 26AWG copper clad steel wire with a great "silky" jacket to minimize wire tangle. You can cut the wire to fit your needs. Typically, a length that is not a multiple of a quarter wave on any ham band is best. This antenna requires a wide antenna tuner and is rated to handle 100 watts SSB/CW, 50 watts digital. While there are exceptions, the built-in tuner on most radios (Icom, Kenwood, Yaesu) are typically narrow range tuners that can handle a range from 25-150 ohms. This is not wide enough to handle all conditions.
( 2 )
$110.00
Synthetic Textile Industries Antenna Support Rope
Synthetic Textile Industries Antenna Support Rope is the premium double-braided Dacron/polyester rope that Amateurs and SWLs have been using for years! Available in several sizes and spool lengths, these superior antenna support ropes are not weakened by decay or mildew and provide excellent resistance to abrasion. The color sealed black polyester yarn used in the braided jacket also protects the cord from damage due to ultra-violet light. Order some Antenna Support Rope today, so you will have it on hand for your next antenna project! This rope is perfect for supporting your wire and vertical antennas, but support rope should NOT be used for tower guying. For your tower guying needs, check out our Tower Guy Lines in the Tower Department here at www.DXEngineering.com
( 95 )
$13.59
—
$279.99
EAntenna Multi-Band Dipole Wire Antennas
EAntenna Multi-Band Dipole Wire Antennas come in single wire and parallel-wire types. Those with multiple wire elements come with special spacers to keep the dipole elements separated. All are supplied with 1.5 kW PEP balun with SO-239 coax connector. A variety of models are available including 80, 40 20, 15 and 10 meters, or 40, 20, 15 and 10 meters, a 20, 15 and 10 meter model, a two-band model for 80 and 40 meters and a special 30, 17, 12 and 6 meter model. They are made with top quality components to offer long service and excellent operational results. Featuring high strength polycarbonate insulators, you can depend on excellent multi-band operations with EAntenna Multi-Band Dipole Antennas. NOTE: Manuals are normally supplied in Spanish and English. If your manual doesn't have an English section, please contact DX Engineering for an English version.
( 34 )
$289.99
—
$399.99
Alpha Delta Single Band Full Size Dipole Antennas
Alpha Delta Single-Band Full Size Dipole Antennas are pre-assembled half-wave monoband dipole antennas. They are pre-tuned for the lowest indicated frequency and come with the correct amount of mounting rope. These antennas may be tuned for any frequency by shortening the wire lengths according to the supplied instructions. Cut their DX-80 for 60 meters, their DX-40 for 30 meters, and their DX-20 for 17, 15, 12 or 10 meters. They are constructed with a Delta-C Center Insulator with built-in SEP static electricity protectors and are fully assembled using stainless steel hardware, 12-gauge PVC-insulated high-strength solid copper wire, and DELTA-CIN End Insulators. Their center insulators feature SO-239 (UHF female) connectors to accept the PL-259 on your coaxial cables. These antennas will easily handle full legal power. For quality monoband dipoles you can depend on, order Alpha Delta Single-Band Full Size Dipole Antennas from DX Engineering!
( 40 )
$90.99
—
$119.99
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 187 )
$13.99
—
$1,187.99
DX Engineering TWIG End Fed Half Wave QRP Antenna Feedpoint Kits
DX Engineering TWIG End Fed Half Wave QRP Antenna Feedpoint Kits are a compact, essential component for building a low-power (QRP) end-fed half-wave antenna system. Perfect for portable operations and outdoor activities such as POTA® or SOTA™, this feedpoint kit simplifies setup while delivering reliable performance. The TWIG is rated for 25W SSB, 10W CW, and 5W Digital modes, delivering an SWR of less than 2:1 without an antenna tuner. At its core, the TWIG features a 49:1 transformer that matches the impedance of the user supplied half-wave element wire to 50-ohms, ensuring compatibility with most QRP transceivers. The BNC female connector pairs easily with recommended coax cables, and when the element wire is properly tuned, no external tuner is required—reducing the amount of gear you need to carry. The kit includes a built-in quick connector designed for 24/26 AWG antenna wire, making element installation fast and secure. Two end insulators and clips are also provided, ensuring reliable strain relief and easy attachment of the antenna wire in the field. Installation is quick and straightforward, allowing you to get on the air fast and start making contacts. No additional counterpoise wire is necessary; the coax cable serves that function when installed correctly. For best results, use optional 24/26 AWG wire such as CEW-VIZ24-YEL100, a high-visibility, PVC-insulated stranded copper wire. A typical setup uses a sloper configuration, with the feedpoint about 6–7 feet above ground and the wire sloping upward to 25–30 feet. Recommended coax length is 25–35 feet with BNC connectors and adding an optional DXE-LPFC-BNC Feedline Choke at the transceiver end is suggested. While the antenna supports multiple configurations, wire length will vary based on installation.
( 1 )
$49.99
Moonraker G5RV Wire Antennas
Moonraker G5RV Wire Antennas have gained popularity as one of the most widely used multi-band antennas worldwide and deliver good overall performance on most HF ham bands when paired with an external tuner. These G5RV antennas feature a high-quality SO-239 molded socket at the end of the ladder line. This design offers a significant advantage by allowing the use of coaxial cable as the entry feedline to your radio equipment. However, it's important to note that some internal tuners may not have the range required to properly tune this antenna.
( 7 )
$71.99
—
$150.99
On Sale
Kelemen Trap Dipole Antennas
Kelemen Trap Dipole Antennas are high-quality, heavy-duty pre-assembled wire antennas intended for permanent installations. They feature special traps made with of PTFE (Teflon®) insulated coax for high Q and low losses, offer high performance multi-band operations—and are excellent shortened antennas where there's not enough space for a full-size dipole. Kelemen Trap Dipole Antennas include a series of monoband models, as well as a series of multi-band models that cover an extensive combination of HF bands from 160m through 10 meters. Specific models handle either 400 watts, 1,000 watts or 2,000 watts PEP SSB and CW at resonance. Kelemen Antennas are fully temperature-resistant and weather-proof, and are manufactured from high-quality materials. Balun cases are constructed of transparent, weather-proof polycarbonate with a bottom-mounted SO-239 (UHF female) connector. Hardware and clamps are all stainless steel. Each antenna is completely assembled with the balun, clear PVC-insulated stranded copper wire, stainless wire clamps and egg insulators, ready for operation. Just add rope and coax to complete your Kelemen wire antenna installation. Kelemen Trap Dipole Antennas may be mounted horizontally or in an Inverted-Vee configuration with a central support required. Many Kelemen Antennas are perfect for portable operations because of their low weight. Their coaxial traps are much lighter than conventional traps, making it easier to keep the antenna at an effective height. In many cases they can be easily supported by a single fiberglass pole. For base operations, these antennas should be placed high, in an unobstructed location well away from buildings to limit shifting of resonant frequencies. Kelemen Antennas are often the best possible antenna choice for full-time base operations, offering the advantages of specialized multi-band coverage that perfectly complements the other antennas of the station. Order Kelemen Antennas in North America exclusively from DX Engineering.
( 30 )
$309.99
$159.99
—
$549.99
Kelemen Double-Band 80M & 40M Dipoles
Kelemen Double-Band 80M & 40M Dipoles are high-quality, preassembled wire antennas featuring full-size elements for both 80 and 40 meters, 128 ft. and 65.6 ft. respectively. Kelemen Dipoles are rugged; strong but lightweight, with good stability and excellent longevity. The included balun is intentionally not potted watertight to save on weight, instead using effective weep holes. Maximum power handling of this model is 2 kW PEP. Kelemen Dipoles are pre-tuned to the lower end of the band (CW) because they are easily shortened for use on the phone (SSB) end of the band. This "Fan Dipole" are the simplest and most efficient type of two-band dipole. Depending on the availability of supports, the Kelemen Dipole can be suspended in different ways and achieve different directional characteristics depending on the height. As an inverted-V set up close to the ground, it is an ideal omnidirectional antenna with strong high-angle radiation which is good for local traffic. The higher the dipole hangs, the flatter the radiation, and the better the chances for DX. Due to the light construction of the Kelemen dipoles, the requirements for the supports are not very high. For example, with inverted-vee setups, a push-up mast is usually sufficient as a mast. With horizontal suspension, trees with antenna ropes and pulleys can often be used as support points. Insulators and center hooks are included with each preassembled Kelemen Dipole antenna. For installation, use lengths of non-conductive antenna rope for the center support and for each end of the dipole. Order Kelemen Double-Band 80M & 40M Dipoles in North America exclusively from DX Engineering.
( 1 )
$269.99
Momobeam Multiband Coil Shortened End Fed Wire Antennas
Momobeam Multiband Coil Shortened End Fed Wire Antennas are the perfect HF solution for amateur radio operators seeking simplicity, versatility, and performance. Designed for both fixed and portable operation, these multiband antennas can be deployed quickly in horizontal, inverted L, or sloper configurations—ideal for operators on the go. Covering the 80–10m or 40–10m amateur bands (depending on the model) and delivers reliable multiband performance. Built to last, these end-fed wire antennas feature stainless steel hardware and UV-resistant materials for exceptional durability. At their core is a coated copper wire radiator paired with a 49:1 impedance transformer, delivering efficient 50-Ohm operation across the entire frequency range. An integrated loading coil adds the necessary inductance to ensure proper resonance when using shortened antenna wires. Rooted in the rich history of end-fed technology—dating back to the Zepp antennas used on Zeppelin airships during World War I—these antennas combine proven design principles with modern engineering for unmatched versatility. Whether you're a beginner or a seasoned operator, Momobeam Multiband End Fed Wire Antennas are your go-to solution for dependable HF performance.
Not Yet Reviewed
$212.99
—
$399.99
DX Engineering NVIS 80 Meter Coils
DX Engineering NVIS 80 Meter Coils are component part of the DXE-NVIS-8040S Shortened NVIS Wire Antenna. They provide the required inductance to load the antenna wires that are approximately one-half their normal length. Constructed with heavy-gauge wire and extra-tough form material, these coils will last a very long time out in the elements!
( 1 )
$129.99
DX Engineering Cable Strain Relief Kits
DX Engineering Cable Strain Relief Kits are designed to be used with DX Engineering and COMTEK Baluns, are included in certain Universal Wire Antenna insulator kits, and are offered with two cable clamp sizes to cover most popular sizes of coaxial cables. They may be used in many other applications with only a single point of suspension necessary. Long runs of coaxial cable are heavy, and if they are not properly restrained, the weight of the cable can cause a failure in your feedline connection. In some cases, the cable can pull completely out of the PL-259 connector. DXE Cable Strain Relief Kits are manufactured with corrosion-resistant aluminum and supplied with stainless steel hardware. These kits are very durable and will ensure that the cable stays connected, to keep you on the air. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Don't use the antenna and coax connector to support your cable! Use DX Engineering Cable Strain Relief Kits and relieve that strain!
( 5 )
$26.99
Kelemen Monoband Dipoles
Kelemen Monoband Dipoles are high-quality, preassembled wire antennas featuring full-size models and a few shortened low-band models with coils for lengths that are easier to fit in the yard. Kelemen Dipoles are rugged; strong but lightweight, with good stability and excellent longevity. The included balun is intentionally not potted watertight to save on weight, instead using effective weep holes. Maximum power handling depends on each model's balun or coil used on shorter antennas. Kelemen Dipoles are pre-tuned to the lower end of the band (CW) because they are easily shortened for use on the phone (SSB) end of the band. Monoband dipoles are the simplest and most efficient type of dipole. Depending on the availability of supports, the Kelemen Dipole can be suspended in different ways and achieve different directional characteristics depending on the height. As an inverted-V set up close to the ground, it is an ideal omnidirectional antenna with strong high-angle radiation which is good for local traffic. The higher the dipole hangs, the flatter the radiation, and the better the chances for DX. Due to the light construction of the Kelemen dipoles, the requirements for the supports are not very high. For example, with inverted-vee setups, a push-up mast is usually sufficient as a mast. With horizontal suspension, a small tree with a pulley can often be used as a support point. Insulators and center hooks are included with each preassemble Kelemen Dipole antenna. For installation, use lengths of non-conductive antenna rope for the center support and for each end of the dipole. Order Kelemen Monoband Dipoles in North America exclusively from DX Engineering.
( 13 )
$129.99
—
$279.99
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas
Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas are in their flagship antenna group (BBA Series) and are all-round best performers. These antennas are highly efficient and engineered to meet the exacting standards of professional users. Bushcomm BBA Series Antennas have the flexibility to suit a wide range of installation situations - between two purpose built towers, in an inverted "V" configuration or even between a tower and the shed out back. All BBA Series antennas include a purpose-designed balun. BBA-1KDE specifications: * Frequency Range 1.6 - 30MHz * Nominal Input Impedance 50 Ohm * VSWR (typical) Better than 2:1 (with 30m RG-213) * Gain (height dependent) 5dBi (typical) -5dBi at 1.8MHz (typical, 130 ft. height) * Power Rating 1,000 Watts continuous 1.5 kW PEP (voice) * Input connector UHF Type socket (SO-239) * Operating Temperature -22 degrees F to 122 degrees F * Storage Temperature -40 degrees F to 185 degrees F * Shipping 57 x 15.7 x 8.7 in., approximately 35 lbs. * Antenna Length 177 ft. * Radiating elements 0.079 in. (14AWG) Stainless Steel (304) * Wind rating 130mph (horizontal) * Ice loading 0.25 in., (with reduced wind rating) * Mast Spacing 183 ft. horizontal tower spacing; 131 ft. footprint inverted V Note: When the "Documentation" tab is available, please look at the associated files for additional product information. The highest quality materials are used in construction of these antennas including stainless steel wire and fittings and UV resistant fiberglass rods. Quality materials and excellent design produces an antenna that will survive the rigors of the outdoors for many years. For an ultimate broadband dipole, remember these Bushcomm BBA-1KDE Kilowatt Multi-Wire Broadband Antennas from DX Engineering.
Not Yet Reviewed
$2,610.99
Diamond Antenna W8010 Wire Dipole Antennas
Diamond Antenna W8010 Wire Dipole Antennas arrive with the really hard work already done for you! All of the wire lugs and connectors are in place and the loading coils are wound and ready to go. All that is necessary is to assemble the pieces and hang it up! The beauty of these shortened resonant dipole antennas is that they will cover 80, 40, 20, 15, and 10 meters with an acceptable SWR and without an antenna tuner. However, due to the typically limited bandwidth of wire antennas, some trimming may be required to get the absolute best SWR from one band-end to the other. Each band is individually adjustable, as this wire antenna has two legs for 80, 40 and 15 meters and two for 20 and 10 meters, which are to be separated by at least 30 degrees vertically or horizontally. If you have an HF antenna tuner handy, then you will always have minimum SWR away from the center frequency. Add some rope and a coax to this low-loss coil loaded dipoles and put it up between trees or on a mast as a 4-way inverted-vee. With its 1200 Watt power rating, you'll be ready to operate and even snag some DX! An SO-239 connector allows for an easy coaxial connection to the center insulator and the approximate 63-foot length will comfortably fit most backyards. Diamond Antenna went to great lengths to seal their components against the weather, so durability and reliability come as standard features! When you're looking for an inexpensive five-band HF dipole, Diamond Antenna W8010 Wire Dipole Antennas are going to be hard to beat!
( 11 )
$164.99
Clearance
DX Engineering Multi-Band Dipole Antennas
DX Engineering Multi-Band Dipole Antennas are designs that are rugged, yet lightweight. Using a tuner, they are usable to 30 MHz and come complete with the wire elements, ladder feedline, center T support, and end mount brackets. These antennas are built using the highest quality components. They use 14 AWG stranded-copper, PVC jacketed elements for flexibility and strength and 100 ft. of 18 AWG 300-ohm 0.88 Velocity Factor ladder lines that are UV-resistant. Stainless steel hardware is included. Often, a 4:1 balun is suggested for multi-band dipoles; however, the best balun to use for this application is a 1:1 ratio. The 1:1 baluns provide better balance, have lower loss, and are more tolerant to load impedance and balance variations than other baluns. A tuner balun is not included in the dipole antenna kits and is available separately. The dipole center T support has pre-drilled holes for the attachment of the wire elements, feedline, and support or messenger lines. The center support top hole is used for the attachment of a "messenger line" that can be strung above the antenna wire and is used to provide support for the antenna wire and feedline. The use of the messenger line, which is strongly recommended but not included, will reduce the stress on the element wires and keep the antenna from stretching over time, which will change its resonant frequency. This line can be thin Synthetic Textile rope available from DX Engineering, which has a high breaking strength. Ideally, it should attach to the same structure used for the dipole, only above it, forming at least a 30 degree angle between the dipole and the messenger line. For further information and to decide the amount of rope you will need, please read the included instructions and check your wire antenna area of construction. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you lack the room for more than one antenna or need a multiband antenna for band agility, consider one of these DX Engineering Multi-Band Dipole Antennas as an elegant and economical solution!
( 30 )
$93.99
—
$125.99
$75.19
—
$100.79
DX Engineering Rope Hardware Kits
DX Engineering Rope Hardware Kits are exactly what you need for all kinds of antenna projects that use support rope. Designed especially for use in conjunction with Mastrant Antenna Support Rope, these rope hardware kits provide just the right size pulleys, shackles, rope clips, duplex clips, carabiners, thimbles and quick links to facilitate fast and easy rigging, raising and lowering of wire antennas and guying of vertical antennas and antenna supports. They're great for experimenters, SWLs and Radio Amateurs who need to frequently adjust or "tinker" with their antennas. When used with new wire antenna installations, these products and Mastrant Antenna Support Rope allow for easy trimming or retuning of mono and multiband dipoles, end-feds, slopers and all types of wire antennas. Just lower, trim, and raise your antenna again until it's just right. For vertical antennas and support masts, use these kits for an installation that can be adjusted and disconnected easily, without having to constantly re-tie knots and deal with tangled excess rope. These kits feature stainless steel and metal-alloy parts for excellent durability and weather resistance. They will last a very long time. Are you raising a wire or vertical antenna or mast, or are using support rope on another project where strength and convenience are equally important? Consider using Rope Hardware Kits from DX Engineering for a professional looking project that really is stronger and is SO much easier to work on!
( 33 )
$9.10
—
$36.29
Bushcomm FD-600 Wideband Folded Dipoles
These Bushcomm FD-600 Wideband Folded Dipoles are compact, two-wire folded dipole alternatives to our best-selling model; the BBA-100 three-wire broad-band antenna. The FD-600 Folded Dipole covers the frequency range of 2-30 MHz, and has a rated power input of 600 watts PEP. Best of all, as with the majority of our antennas, no tuner is required. The Folded Dipole is a multi-wire antenna that is relatively lightweight. By having only two stainless steel wires compared to the BBA-100's three wires, it also has less wind loading! These antennas sport an SWR of better than 2.5:1 (typically 1.5-1.6:1) from 2 to 30 MHz! Special Features of the FD-600: * No Tuner Required * UV Resistant Spacer Rods * UV Resistant Balun/Load Boxes * Stainless Steel Wire & Fittings Electrical Characteristics: * Frequency Range: 2-30MHz * Input Impedance: 50 Ohms * Power Input: 600W PEP (voice) / 250W Continuous and Data Modes * Input Connector: SO-239 UHF-type connection Mechanical Characteristics: * Shipping Weight: 5kg, (11 lbs.) * Antenna Length: 27m, (88.58 ft.) * Mast Spacing: 29m (95.15 ft.) Horizontal configuration * 18m (59 ft.) footprint inverted "V" (with a 10m (32.80 ft.) high feed point) * Built to withstand the rigors of the world's harshest environments Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Folded dipoles have existed since nearly the beginning of Amateur Radio. Broadband versions are fairly new. Take advantage of the extreme durability of these stainless-steel beauties to cover the all of ham bands and SWL shortwave frequencies. Order Bushcomm FD-600 Wideband Folded Dipoles from DX Engineering!
( 2 )
$899.99
DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits
DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits are designed for building coax fed wire antennas that will be used in high power operations. These new universal wire antenna kits include a completely unique coaxial cable connector and feedline strain relief system. All EZ-BUILD® kits also include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments of antenna wire length without soldering! The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope. Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals, stainless steel hardware, and a pre-assembled coax pigtail with connector and adapter that accepts your feedline PL-259 (UHF male) connector. The feedline is secured with the exclusive DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the connectors to the strain of the coaxial cable's weight or movement. DX Engineering EZ-BUILD® UWA213 Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V Beam, or loop antennas. This UWA213-KIT is the model to use for the construction of an RG-213 or RG-8U coax fed wire antenna that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels. Use the EZ-BUILD® UWA-KIT for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line. DX Engineering EZ-BUILD™ UWA213 Center-T and End Insulator Kits include: -- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes -- Two end insulators featuring the no-loop, no-solder, serpentine grip design -- Two stainless steel wire connection bolts, nuts, and washers. -- Four crimp ring terminals for antenna and ladder line wire connections -- One pre-soldered, weather-sealed and tested coaxial connector and adapter assembly -- One aluminum cable strain relief bracket and mounting hardware -- Two strain relief P-clamps with neoprene cushions sized to grip RG-213 or RG-8U without crushing the coaxial cable -- Additional stainless steel hardware for mounting DX Engineering baluns Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are all sold separately.
( 2 )
$85.99
DX Engineering Mastrant Mast Clamps
DX Engineering Mastrant Mast Clamps give you the flexibility and support you need when guying your antenna mast. Constructed from high quality steel, galvanized for a weather-resistant finish, and assembled with stainless steel hardware for extra long life, durability, and great looks. Guying is simplified with Mastrant Mast Clamps from DX Engineering!
( 3 )
$19.99
—
$21.99
Alpha Delta Parallel SWL Dipole Antennas
Alpha Delta Parallel SWL Dipole Antennas cover AM broadcast through 30 MHz. They provide efficient, low-noise, broadband performance for medium wave, tropical, international SW, military, government, embassy, maritime, aircraft, commercial, and utility frequencies. They feature ISO-RES inductors, parallel wire elements, and the exclusive DELTA-C center insulator with the built-in ARC-PLUG static electricity protector. The antennas utilize stainless steel hardware and 12-gauge solid copper wires. Their overall length is 80 ft. and they may be installed as dipole, inverted-vee, or full sloper antennas. These antennas can also be used with an antenna tuner as transmit antennas. Their connectors will accept either coaxial cable or balanced line and the antennas come fully assembled and ready for installation.
( 1 )
$209.99
DX Engineering TWIG QRP Off Center Fed Dipole Kits
DX Engineering TWIG QRP Off Center Fed Dipole Kits provide everything needed to build lightweight, low-power (QRP) Off Center Fed Dipole (OCF) antennas around the DXE-TWIG-4-1C QRP Current Balun. Designed for portable operating, these kits make it easy to assemble efficient multiband antennas for outdoor activities such as POTA® and SOTA®, as well as other field and portable operations on the 40 through 10-meter amateur bands. When properly constructed, these antennas are rated for 25 watts SSB, 10 watts CW, and 5 watts digital modes. At the heart of these kits is the included DXE-TWIG-4-1C balun, which features a 4:1 transformer that converts the approximately 200-ohm impedance of an OCF antenna to the desired 50-ohm impedance required by standard coaxial feedlines. A BNC female connector provides compatibility with recommended coaxial cables and most QRP transceivers. When installed correctly and tuned to the desired operating bands, the included 24 AWG PVC-insulated, stranded copper, high-visibility yellow antenna wire typically eliminates the need for an external antenna tuner. This reduces the amount of gear operators need to carry into the field while allowing for quick band changes and improved operating efficiency. For best performance, a coaxial feedline with BNC connectors (sold separately) measuring approximately 25 to 35 feet is recommended. These antennas can be deployed in a variety of configurations, with final wire lengths varying based on the installation method and operating requirements.
Not Yet Reviewed
$77.99